Used Rlu 210 for sale (3,005)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable Nodpfx Afex Tqgbo Iewb - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, machine/vehicle number: 008294, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 210 + ZHR 01 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 210 + ZHR 01 Nwsdpfx Aox A Tf Nof Iob

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg Nedpfx Afeyffm Ej Iswb

Condition: good (used), Year of construction: 2015, operating hours: 1,838 h, functionality: fully functional, machine/vehicle number: 644585, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,696 mm, This is a KUKA KR 210 R2700 extra industrial robot with KRC4 controller, year of manufacture 2015, and a Z.TT.1Axes_2000_KUKA single-axis turntable with 2000 kg load capacity. We are also pleased to offer the robot as fully refurbished! The robot includes the following options: BoardPackage Nsdpfx Afeydk Tzo Iewb EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: good (used), Year of construction: 2013, Fanuc Oi-TD CNC control 12-fold turret head (VDI 30 taper) collet chuck device C-axis driven tools tailstock coolant device chip conveyor With the machine are 6 driven tools, some fixed tool holders, 3-jaw chuck and collets Technische Daten / technical details: max. Umlaufdurchmesser über Bett / max rotary diameter over bed 460 mm max. Umlaufdurchmesser über Schlitten / max rotary diameter over sledge 328 mm max. Drehdurchmesser / max. turning diameter 303 mm max. Drehlänge / max. turning lenght 334 mm Planweg (x) / cross way (x) 181 mm Längsweg (z) / longitudinal way (z) 390 mm max. Stangendurchmesser / max bar diameter 52 mm Drehzahlbereich / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang x,z / rapid feed x,z 30,30 m/min Nsdpep T Uxxsfx Af Iswb Antriebsleistung Spindel / drive capacity spindle 9/11 kW Gewicht der Maschine ca. / weight 3000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2008 Control : Heidenhain iTNC 530 Speed : 10000 rpm Movement X/Y/Z : 1800/2100/1250 mm Tool holder : HSK-A100 Spindle: Technology:Motorspindle Speed:10.000 rpm Power (max.):44 kW Torque (max.):288 Nm Nodpfxoydgp Ej Af Iowb Taper:HSK-A100 Swivel range in B:-30°/+180° NC-Roundtable: C-Axis:360° Clampingsurface:ø1.700 mm Tableloading (max.):8.000 kg In general: Toolmagazine:60 stations Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter, temperature control and High-pressure, 40 bar Workpiecemeasurement:Touch probe, m&h Toolmeasurement:Laser, BLUM Attachment spindle:GMN HC 140sc-42000/8 Processobservation:Operation mode 4 Setup operations:Electronic handwheel Further Equipment:Spindlechiller, Visiport

Condition: used, Year of construction: 2008, operating hours: 5,139 h, machine/vehicle number: 1200017639, fuel type: diesel, Empty weight: 15.050 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Nedpjx Am I Dofx Af Iswb Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, machine/vehicle number: 1200022136, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 15.130 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Transport dimensions (LxWxH): 5.75x2.5x3.2 Nwjdpfetr Npdox Af Ieb Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Nwedpfxjw Dcb Ss Af Ijb

Condition: good (used), Year of construction: 2002, Robot Kuka KR210L180 Series 2000 Year of manufacture: 2002 Reach: 2700 mm Weight: 1245 kg Payload: 180 kg Control unit: KRC2 Control unit weight: 185 kg Software version: V4.1.7 SP08 Kuka KCP2 Connection cables: 7 m 22126ä Nsde Tx Tujpfx Af Iewb

Condition: good (used), Year of construction: 2004, Robot Kuka KR210 series 2000 Nwjdpfxsbg Rt Is Af Iob Year of construction 2004 Reach 2700 mm Weight 1245 kg Load capacity 210 kg Control VKRC2 (VW / Audi version) Weight 185 kg Software version V4.1.7 SP08 (standard Kuka software, no VW) Kuka KCP2 Connection lines 7m .

Condition: used, plate width 3200 mm plate depth 2000 mm plate height 210 mm weight of the machine ca. / t Clamping plate Nodpfx Aoud Ipqsf Iewb Dimensions: 3200 x 2000 x 210 mm T-slot dimensions: ? x ? x ? (H)

Condition: used, machine/vehicle number: ZCFA775F80265xxxx, mileage: 227,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21673 Specifications: EU-approved until 01.11.2025 2016 model Approx. 227,000 km Automatic Tires (see photos) 1,500 kg Zepro tail lift Side door Norka box body 3 seats Euro 6 Length: 810 cm Width: 255 cm Wheelbase: 418 cm Curb weight: 4,940 kg 4x2 207 hp Internal length: approx. 613 cm Internal height: approx. 235 cm Reverse camera Radio/CD Air conditioning (A/C) Description:Iveco 75-210 two-axle box truck from 2016.New brake discs, clutch parts, and a front mirror were replaced during the service. last year.Equipped with a Norka box body and a 1,500 kg Zepro lift.Can be delivered on short notice.See video for more details. Km: 227000 HK: 207 Technical approved: no EU-approved until: 01.11.2025 Own weight: 4940 Total Weight: 7500 Payload: 2485 Nwodpsxq U T Dsfx Af Ijb Width: 255 Length: 810 Euro: 6 Model: 2016 Iveco 75-210 4x2 skapbil m/ lift Gearbox: Automatic

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm control Heidenhain greates pass round over bed 380 mm Nodpfx Asyb S Ihjf Ijwb total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: used, machine/vehicle number: ZCFA875F40270xxxx, mileage: 71,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21347 Specifications: Nwsdpjxd Rbdofx Af Isb 2020 model Km: approx. 71,000 Automatic Tires (see pictures) 3 seats Interior height: approx. 236 cm Norka box body Side door 1500 kg Zepro lift Rear-view camera Euro 6 Length: 794 cm Width: 255 cm Wheelbase: 418 cm Curb weight: 5040 kg 4x2 207 hp Radio/CD Climate control/AC Description:2020 Iveco 75-210 box truck with only 71,000 km.Comes with a new bumper and step.Norka box body with 1500 kg Zepro lift and side door.Can be delivered on short notice. Km: 71000 HK: 207 Technical approved: no EU-approved until: 21.10.2025 Own weight: 5040 Total Weight: 7500 Payload: 2385 Width: 255 Length: 794 Euro: 6 Model: Eurocargo 75-210 4x2 Skapbil Gearbox: Automatic

Condition: used, machine/vehicle number: ZCFA775F50267xxxx, mileage: 93,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 22105 Specifications: Not EU approved Mileage: 93,000 km Transmission: Automatic Tires in good condition Engine brake Nsdpfx Afjx Nuywo Ijwb Euro 6, 207 hp Zepro tail lift, 1,500 kg Side door Norka body 3 seats Radio/CD Climate control / AC Ready for delivery Description: 2017 Iveco Eurocargo box truck with only 93,000 km.The vehicle is not EU approved, but the defect report is included.Ready for delivery. Km: 93000 HK: 207 Technical approved: no EU-approved until: 08.09.2025 Own weight: 4950 Total Weight: 7500 Payload: 2475 Width: 255 Length: 800 Euro: 6 Model: 2017 Iveco Eurocargo 75-210 Skapbil. 93 000 km! Gearbox: Automatic

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Center distance: 1000 mm Swing over bed: 420 mm Center height over bed: 210 mm Swing over cross slide: 220 mm Center height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 Size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Power supply: 380 Volts, 50 Hz - Spindle speed selectable across 12 geared steps - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of jaws) Nwedoyah Rvepfx Af Isb - Multifix size B quick-change toolholder, with 3 tool cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Dimensions (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg Very good condition

Condition: new, Brand new, never used!!! Year of manufacture: 2021 Axes: 6 Max reach: 2701 mm Rated load: 210 kg Max load: ~270 kg Net weight: 1107 kg Nedpfx Afoww Utas Iewb Controller: KRC4 Pendant: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series).

Condition: new, Year of manufacture: 2021 Axes: 6 Nodpfx Aoxnbafof Iewb Max reach: 2701 mm Rated payload: 210 kg Max payload: ~270 kg Dead weight: 1107 kg Controller: KRC4 Teach pendant: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series) Serial number: 1077132.

Condition: excellent (used), mileage: 315,445 km, power: 210 kW (285.52 HP), first registration: 11/2013, fuel type: diesel, axle configuration: 4x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, electric window regulation, power mirror, soot filter, spoiler, tail-lift,

Condition: new, total length: 4,400 mm, Year of construction: 2025, load capacity: 21,000 kg, - Maximale Tragkraft 21.000 kg - Grundgewicht der Maschine 23.500 kg - Abnehmbare Kontergewichte: 2.500 kg Z1 1.500 kg Z2 1.500 kg Z3 750 kg + 750 kg Z4 - L.M.I. Elektronische Lastbegrenzung - Frontabstützungen: Die Stabilisatoren sind an der Vorderseite angebracht und können im geöffneten Zustand zwei Positionen einnehmen. Nwedpsx Ur Nmofx Af Iob - Kompakte: Der hintere Ballast kann entfernt werden, um die Aufstandsfläche der Maschine um mehr als 400 mm zu verkürzen. - Kopf: Hydraulischer Kopf - Batterie: bis zu 8 Betriebsstunden, 96V 1085Ah - Motor: 45Kw AC, variable CC-Pumpen - Antrieb: Vorderradachse, 2x 12Kw AC - PLC: elektronischer Kippmomentbegrenzer - Hydraulische Bremsen: automatisches Bremssystem - Neigung: 0° bis 80° Kopf-5° bis 65° Ausleger

Year of construction: 2004, condition: good (used), Robot Kuka KR210 series 2000 Year of construction: 2002/2004 Reach: 2700 mm Weight: 1245 kg Load capacity: 210 kg Control VKRC2 (VW / Audi version) Weight 185 kg Nwsdj Tx Tpjpfx Af Ieb Software version V4.1.7 SP08 (standard Kuka software, no VW) Kuka KCP2 Connection lines 7 m ..

Condition: not inspected (used), Year of construction: 2009, operating hours: 29,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, total length: 7,755 mm, workpiece height (max.): 40 mm, working height: 950 mm, controller model: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece protrusion: 30 mm Workpiece thickness: 12 - 40 mm Edging material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edging material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Workpiece support with scissor-design and roller support, extendable to 1000 mm Automatic infeed guide adjustment Fixed stops on left side Pneumatically controlled infeed lock Top pressure via driven composite V-belt Electrical height adjustment Workpiece transport unit via transport chain with rubber coating Separating agent spray unit, top/bottom Joint trimming unit 2 x 3 kW Gluing unit A20 with 2 rollers, comprising workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roller magazine, pressure zone C (automatically adjustable with 1 pre-press roller and 6 post-press rollers) Trimming unit HL84 0.8 kW, with automatic chamfer/straight adjustment and pneumatic flush/excess trimming adjustment Pre-milling unit 1.5 kW, pneumatic adjustment between flush and excess milling Contour milling unit FK11 with automatic adjustment from chamfer to radius milling Nedpfx Afjyc S Haj Ijwb Profile scraper PN10 (with pneumatic side retraction) Finishing unit (with pneumatic side retraction), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: used, machine/vehicle number: 007575, Type of edging: Thin edge, Thick edge Nwsdpfx Afeybawwe Ijb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), mileage: 600,521 km, first registration: 01/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 56,700 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,650 mm, loading space width: 2,500 mm, loading space height: 2,520 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electric window regulation, fog lights, power mirror, spoiler, tail-lift, = Additional Options and Accessories = - Leaf suspension - Roof spoiler - Speed limiter - Air suspension - Radio/CD player - Radio/cassette player - Sleeper cab = Notes = Nwedpsycv R Nefx Af Ijb ZCFAG1EF602676212 = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 4,485 cc Axle Configuration Brakes: Disc brakes Front axle: Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf suspension Rear axle: Twin tires; Inner left tire tread: 55%; Outer left tire tread: 55%; Inner right tire tread: 55%; Outer right tire tread: 55%; Suspension: Air suspension Weights Unladen weight: 7,300 kg Payload: 4,690 kg Gross vehicle weight: 11,990 kg Functional Tail lift: DHOLLANDIA DHLM.20, tailgate, 2,000 kg Condition Technical condition: Very good Visual condition: Very good Further Information Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano) Available on WhatsApp and Viber. MOB: Nederlands) Available on WhatsApp and Viber. When paying by bank transfer, the funds need to be transferred to our bank account listed below. Always check the payment details provided on our website. If you have received different information, please contact us. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U