Used edgebanders for sale (586)

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 4547, functionality: fully functional, operating hours: 5,049 h, total height: 2,550 mm, total length: 5,900 mm, total width: 1,350 mm, overall weight: 3,000 kg, plate height: 45 mm, TECHNICAL DETAILS The machine consists of 8 processing units as follows: 1. Unit: Pre-milling unit – tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers – tools available 4. Unit: End trimming unit – tools available 5. Unit: Rough milling unit – tools available 6. Unit: Edge rounding unit – tools available 7. Unit: Radius profiling unit – tools available Djdszrmtfepfx Apwskr 8. Unit: Brushing unit – tools available Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 60 mm Panel length min.: 180 mm Feed rate control: Continuously variable Gluing system: Glue pot Voltage: 400 V Power consumption: 53.31 A Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,350 x 2,550 mm Shipping weight: 3,000 kg Note: The top and bottom stripping blades are currently not functional.

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Dkjdpfx Aezmtldspwer Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions Dksdpfxezmtkao Apwjr PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Dodozmtivspfx Apwjkr Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Manufacturer model: WD60 Motor power: 0.35 kW Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Total connected load: 22 kW EQUIPMENT Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: used, Year of construction: 2015, edge thickness (max.): 22 mm, feed rate X-axis: 25 m/min, milling spindle speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Manufacturer/Model: RT-E Motor power: 4 kW Gluing Preheating lamps: for heating the panel side PUR pre-melter: Nordson PURBLUE 4-HO Glue application unit: 100 V End-capping unit Manufacturer/Model: YU/SP750 Number of motors: 2 Positioning: NC-controlled Milling unit Manufacturer/Model: Type U Motor power: 4 kW Speed: 12,000 rpm Engagement: automatically time-controlled Polishing unit Number of motors: 2 TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 62 mm Min. panel length: 380 mm Min. panel width: 55 mm Min. edge thickness: 0.4 mm Max. edge thickness: 22 mm Max. feed rate: 25 m/min Pressure: rubber belt MACHINE DETAILS Dodpfx Ajzmvpxspwokr Control system: PC control EQUIPMENT CE marking Rubber belt pressure Panel support guides Pre-milling unit RT-E Preheating lamps for panel side PUR pre-melter Nordson PURBLUE 4-HO End-capping unit YU/SP750 Milling unit Type U Polishing unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6527

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Djdpsy In A Nefx Apwskr Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510 Dedpfszbxznjx Apwokr

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Dedoqy Em Tjpfx Apwekr Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Dkodpfx Asw Idc Repwer Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Dodpfoy In Dgsx Apwskr

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Dodew Idc Depfx Apwjkr Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 12 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Dsdpfx Aey In A Aspwjkr Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2004, Edgebander manufactured in 2004. This BRANDT KDF 560 features automatic unit adjustment via PC control and is suitable for thin and thick edging, accommodating edge thicknesses from 0.4 to 8 mm and workpiece heights of 8 to 50 mm. It includes various installed units such as a pre-milling unit, glue application unit, and polishing units. If you are looking to get high-quality edging capabilities, consider the BRANDT KDF 560 machine we have for sale. Contact us for further details. • Type of drive: 400 V / 50 Hz / 3-phase • Main electronic connection: 400 V / 50 Hz / 3-phase • Power consumption: 13.2 kW • Used edge banding machine • Year of manufacture: 2004 • Fuse rating: 35 A • Automatic unit adjustment via PC control • Suitable for thin and thick edging (ABS, PVC, veneer, and solid wood edging) • Edge thickness: approx. 0.4 to 8 mm • Workpiece height: approx. 8 to 50 mm Dkedpjztc Saofx Apwsr • Pre-milling unit • Glue application unit (hot melt) • Pressure zone with pressure rollers • Crosscut saw • Flush/radius milling units (top and bottom) • Corner rounding unit • Radius scraper • Glue scraper • Polishing units • The technical data and descriptions are copies of the original order confirmation • The information is provided for informational purposes only and is not binding

Condition: good (used), Year of construction: 2002, functionality: fully functional, For sale is a robust and reliable Hebrock EURO 2000 DK edge banding machine for the economical edge banding of panel materials. The machine is ideally suited for carpentry shops, joineries, and interior construction. Thanks to its compact design and solid Hebrock technology, it is particularly reliable and easy to operate. The machine is in good used condition. Manufacturer: Hebrock Type: EURO 2000 DK Dkodjzrnpnepfx Apwsr Year of manufacture: 2002 Voltage: 400 V Edge material: PVC, ABS, melamine, and veneer Edge thickness: approx. 0.4–3.0 mm Workpiece thickness: approx. 8–50 mm Dimensions: L3100mm x W1320mm x H1300mm Weight: 550 kg 100 mm extraction nozzle Automatic feed Glue pot with hot melt adhesive Pressure zone with pressure rollers Trimming unit front/rear Milling unit Polishing unit Extraction connections available Equipment Automatic workpiece feed Glue application Pressure rollers Trimming unit Flush trimming unit Polishing unit Control panel Pneumatic units Extraction connections Scope of supply Hebrock EURO 2000 DK Accessories as shown in the photos Operating manual The machine can be inspected and tested under power by prior arrangement. Transportation is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is provided without warranty.

Condition: ready for operation (used), Year of construction: 2003, Edgebander manufactured in 2003. This IMA AVM/K/I/G80/822/S3R3L20 is designed for milling, edge banding, and postproduction for rebate doors. It features a heavy machine base, a drive for feed speed of approximately 5-25 m/min, and a glue application unit for various edge materials. If you are looking to get high-quality edge banding capabilities, consider the IMA AVM/K/I/G80/822/S3R3L20 machine we have for sale. Contact us for further details regarding this machine. • Spindle motor power: • 1 pre-milling unit with 2 motors, each 3 kW • 1 milling unit with 2 motors, 1 kW • 1 milling unit with 2 motors, 660 W • Spindle speed range: 12.000 rpm • Heating capacity: 5,0 kW • Used single-sided rebate and edge-banding machine • Year of manufacture: 2003 • For milling, edge banding and postproduction for a rebate - only on formated / pre-rabbet doors and unrebate doors • Left machine (fix stop on the left side) • Total processing in 3 throughfeeds: • • throughfeed: door top side (cross processing) • • throughfeed: door long side • • throughfeed: door long side • During 2. and 3. throughfeed the edge projection from 1. throughfeed is beeing milled by normal-reverse milling • The double rebate glueing is only possible by readjustment of the machine and manual postprocessing of the edge • Max. door thickness: • Vertical edge: approx. 70 mm • Rebate glueing: approx. 60 mm • Heavy machine base as carrier for units • Drive for feed speed of approx. 5-25 m/min., mechanical stepless adjustable • Transport chain with plastic plates, approx. 80 mm wide, with automatic central lubrication • Manually height-adjustable top pressure with v-belt 80 mm wide • Infeed table • 1 horizontal manually adjustable unheated infeed fence • 1 pre-milling unit controllable, not swivable, not tracing • Glueing unit for optional use of straight edges or softforming, by change of glue application device • Edge material: • Strips: up to 1,3 mm • Coil material: 0,4-3 mm • Solid wood strips: 6 mm • Strip length max.: 2550 mm • Strip height: 14-80 mm (depending on glue application) • Manual side adjustment for pneumatic moveable glue application Dkedezrhbdepfx Apwjr • Manual height adjustment from -15 mm up to +10 mm • 1 glue application 0,8 L, max. edge height 70 mm, straight edge with pneumatic quick lock, Chem-Coat, electronic temperature control • 1 hot melt glue application 0,8 L with quick-lock, edge height max. 80 mm, soft edge, Chem-Coat, with temperature control and control unit for strips • 1 automatic Quickmelt hot melt glue application • 1 2-fold magazine for edge material up to 3,0 mm thickness, manually mountable on the single coil magazine • 1 rebate shape pressure zone for pressing of edge material to a rebate with: • an activation unit 15 kW for reactivation of the edge material for rebate-shaping • a pneumatic controlled shaping tool for the bottom fold edge • a pneumatic controlled shaping tool for the complete rebate • additional pressure rollers for the edge areas with rebate • an electropneumatic side-moving device for the complete pressure zone • 1 horizontal adjustment with mechanical digital readout • 1 trimming unit for 2 motors mounted on top pressure for trimming of the front and rear edge/strip projection for trimming flush or with chamfer • 1 milling unit for 2 motors with height tracing, side tracing, for flush milling from bottom and top, 30° swivable

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This HOMAG Optimat KAL210/6/A20/S2 is designed for jointing straight workpiece edges, gluing, and finishing various edging materials up to 20 mm thickness. It features a feed rate of 18 - 25 m/min and accommodates workpiece thickness from 8 to 60 mm. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KAL210/6/A20/S2 machine we have for sale. Contact us for further details. • Spindle motor power: Joint milling unit: 2 motors each 3 kW; End trimming unit: 2 motors each 0.8 kW; Pre-milling unit: 2 motors each 1.5 kW • Spindle speed range: Joint milling unit: 9,000 1/min; End trimming unit: 12,000 1/min; Pre-milling unit: 12,000 1/min • Single-sided machine for jointing straight workpiece edges, glueing and finishing of various edging materials from the roll or as strips, up to 20 mm edge thickness, in longitudinal and transverse pass. • Feed rate: 18 - 25 m/min. Djdozrg Icspfx Apwokr • Feed rate with form milling FK11 max. 20 m/min. • Workpiece thickness: 8 - 60 mm • Edge material strip max.: 0.4 - 20 mm • Edge material roll: 0.3 - 3 mm • Joint milling unit with electro-pneumatic control of both motors • Gluing unit A20 - 2 rollers • Quickmelt gluing unit • Temperature control electronic with LED display • Magazine 2 rolls manual • For solid edges, strips and rolls • 1 edge feed • 2 roll holders • Pressure zone C • 1 driven pre-press roll diameter 150 mm • 6 pressing rollers diameter 70 mm • Motors can be swivelled manually for bevel cutting • Shape trimming unit FK11 manual • For machining the edge protrusions on the upper and lower edge of the workpiece and for milling of the workpiece front and rear edge • Finishing unit profile PN10 • For chamfering or rounding pre-milled PVC edges • Finishing unit consisting of finishing unit glue joint and buffing unit • Automation package chamfer / radius KAL210/6/A20 • Automatic adjustment of infeed ruler • Automatic adjustment of pressure zone • Pneumatic adjustment from chamfer to straight cut • Pneumatic adjustment of the trimming motors for flush or projection trimming • Pneumatic adjustment of pre-milling unit for flush or projection milling • Automatic adjustment from chamfer to radius milling for form milling • Pneumatic adjustment PN10 / FA11 • Electronic height adjustment • Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,832 h, Edgebander manufactured in 2018. This BIESSE JADE 340 features a Biesse HD touchscreen control unit and operates at a feed rate of up to 12 m/min. It accommodates panel thicknesses from 10 to 60 mm and edge thicknesses from 0.4 to 8 mm. If you are looking to get high-quality edge banding capabilities, consider the BIESSE JADE 340 machine we have for sale. Contact us for further details. • Year: 2018 (10/2018, per nameplate) • CE • Axes: not applicable • Key parameters: panel thickness 10–60 mm • Key parameters: edge height 14–64 mm • Key parameters: edge thickness 0.4–8 mm • Documents: Nameplate & usage-counter photos on page 2 • Equipment / Units included: Pre-milling unit • Equipment / Units included: Glue unit + end-cutting (trim) unit • Equipment / Units included: Corner rounding unit • Equipment / Units included: Additional interchangeable glue pot • Equipment / Units included: Radius scraper + glue-joint scraper • Equipment / Units included: Polishing / buffing units Dkodszrf R Nspfx Apwor • Equipment / Units included: Front & rear anti-adhesive spray units • Condition: Very good condition, in daily production use until sale (per seller's statement) • Usage counter: 526,175 panels processed • Usage counter: 351,289 running metres processed (meter reading 14/05/2026) • Consistent with regular single-shift production

Condition: new, Catalog number: HZ014 – preliminary milling – edge trimming – new machine, in stock – CE certificate – professional TECHNICAL DATA panel thickness 8-45mm edge thickness 0.4 mm – 3 mm min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm Dkedezrurispfx Apwjr feed motor power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm extraction connection 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Dsdpfx Apszrpnlewjkr Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2018, Biesse Akron 1440 A Edgebander (EVA & HotAir) Description Adhesive System: EVA / Hot Air Pre-milling unit RT02 Gluing unit VC-511 End Trimming unit IN-801 Fine trimming Unit RF02 Dkodpfx Aszqdi Uopwer 2 motors corner rounding unit AR02 EDGE SCRAPER RB02 GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 HOT AIR BLOWER UNIT PH-501 SMART-TOUCH CONTROL PANEL KIT HIGH QUALITY AND HIGH PRODUCTIVITY = Belt pressure beam. - Automatic track lubrication system. NC AXIS PACKAGE = AX-1: NC axis on the infeed fence. - AX-1: NC axis on edge pressing rollers.- AX-4, NC axes on Fine trimming Unit.- AX-2, NC axes on Corner rounding Unit.- AX-4, NC axes on Edge scraper MULTIPLE-SPEED KIT 12-18 M/MIN ANTIADHESIVE UNIT ADZ02 AIRFORCE SYSTEM - P2 PRO-GLUE KIT ADAPTIVE INFRA RED LAMP AdIRL-700 PRO-NESTING KIT FOR FINE TRIMMING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT PRO-NESTING KIT FOR EDGE SCRAPER UNIT CLEANING UNIT LPT02 SOPHIA - IoT Connection (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Dkjdpfx Ajxy Tm Ijpwjr

Condition: excellent (used), CATALOG NUMBER 7729 TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES Dksdpfozh H Insx Apwjr – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: used, machine/vehicle number: 008519, Type of edging: Thin edge, Thick edge Gluing System: PUR, Laser Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr Dkodpfx Aszruytspwer

Condition: used, Storage location: Sonnefeld Dksdpfxjway Dcj Apwor

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Dedovvkd Tjpfx Apwokr