Double-sided edge Banders for sale
Identified location: Ashburn (US) (Edit)
|
5
Kantenbearbeitungslinie in U-FormFabrikat: IMAbestehend aus:Pos. 1 Drehstation mit BeschickungstischFabrikat: IMAPos. 21 KantenbearbeitungsautomatFabrikat: IMATyp: CombimaMaschine ITechnische Daten: Kantenmaterialien: Kunststoff/Furnier Rollenware min. Streifenlänge bei Rollenmaterial = ca. 300 mm min. Streifenhöhe bei Rollenmaterialien = ca. 12 mm max. Streifendicke bei Rollenmaterialien = ca. 3,0 mmmax. Arbeitsbreite ca. 2600 mmBestückung nur auf der rechten Maschinenseite: - Fräsaggregat (Sc... more
|
|
7
Panel thickness 10 - 45mm [with rounding unit ]
Bfpiuqaqsu
Panel thickness 10 - 55mm [ without rounding unit ]
Edge thickness in strips 0.4 - 12mm
Edge thickness in coils 0.4 - 3mm
Feed speed 13m/min
Equipped with
Hot melt glue tank and pressure zone
End trimming saws [ tiltable from 0 - 15 degrees ] 0.35kw
Top and bottom trimming / chamfering type RK 90 [ tiltable ] 0.5kw
Rounding unit type K. 0.55kw each
Edge scraping
Buffing 0.25kw
Options fitted
Orion 200 control system with plc [ elimi... more
|
|
15
Homag KF 65/13 / 0E/20/2+5(1, year 2001
panel sizing and edge banding machine – double side
HOMAG Panel sizing and edge banding machine
Fixed stop side an the left, movable side an the right.
Description
Basic machine with continuous machine frame, prepared for installation of panel-sizing, edge banding and processing units.
Unit beam laterally adjustable for modification of panel overhang from 40 - 115 mm
Precise panel conveyor device with block link chain with ball bearings at running and
g... more
|
|
5
Double sided squaring and edge banding machine
Edges up to 3 mm thickness
First and second pass machine
Panel feed by rolling chain
Top pressure by driven V-belts
Width adjustment over linear slideways
Feed speed 10 to 402 m/min
Panel outstand 40 mm.
Bdhefpibyw
Workpiece thickness 8 to 60 mm.
Working height: 950 mm.
Working width, double sided min. 240, max. 2500 mm.
Coil edges 0,3 to 3 mm., coil-diameter 900 mm.
Equipment left and right:
1+1 Long infeed chain, machine II
Squaring part:
1+1 J... more
|
|
9
Type: Double side squaring edge bander
Control: NC 410
Year: 2002
Max. working opening: 3000
Glueing system: EVA, Pre melter for EVA glue
Antisplitting unit: Automatic
Double hogger unit: Yes
Panel side pre heating unit with lamps: Yes
End cutting unit: YES
Rough trimming unit: YES
Fine trimming unit: Tilting
Corner rounding unit: with n 4 motors
Edge scraper unit: YES
Buffing unit: YES
Bfsswmovgq more
|
|
10
DOUBLE-SIDE EDGE BANDER
Min/max edges (band) thickness in rolls mm 0,3 - 3
Edges thickness in stips / lippings (min/max) mm 0,4 - 12
Min/ max panels thickness mm 12 - 40
Min /max working width mm 220 - 3000
Numerical Control: Power Control PC 22
Feeding speed (adjustable) m/min 10 - 32
Distance (center-axes) of the Disappearing Dogs (mm) 500
Top motorized pressure belt
Pre-Milling Unit (Vertical joint trimmers) (2 x Kw 0,4)
Npimr
Glueing Unit (Hot Melt + Quick Melt system): A12 + A34
Band Pr... more
|
|
5
Edge processing line Make: IMA Type: COMBIMA Technical data: Machine 1Edge banding and post processing with adjustable 0-line. Unit carrier for glueing and processing units motoric adjustable from transport chain. Working width: max. 1300 mmworkpiece projection from chain, left side: approx. 40 mmworkpiece projection from chain, right: approx. 40 - 80 mm min. troughfeed width at workpiece projection of 40 mm: approx. 240 mmmin. strip length of coil material: approx. 260 mmmin. strip height of c... more
|
|
4
Edge type PVC, ABS
Edge thickness 0,4 – 3 mm
Workpiece height 12 – 60 mm
Edge height 65 mm
Panel width 220 – 2500 mm
Feed speed 15 – 32 m/min
Distance between bases 1.000 mm
Glue tank granulate
Machine control HOMAG POWER CONTROL PC 22 ; WOODCOMMANDER
Supply 380 V / 50 Hz
Weight c. 18.000 kg
EQUIPMENT
PRE-MILLING UNIT
– 2 motors, each 4 kW
GLUING UNIT QA34
– QUICKMELT function , glue pre-heating
EDGE MAGAZINE 2-positions
ANTI ADHESIVE UNIT
END TRIMMING UNIT HL81
Npd9j
– inclinable 0 – 30... more
|
|
6
Calibrating and/or squaring line with edge banding doing panels all round in 2 passes
Panel width min/max: 220 / 1000 mm
Panel length min/max: 320 / 3200 mm
Edges max. 3 x 45 mm.
Fixed side at the left
Siemens SMSPC controls
Line set up:
Vacuum feeder
Turning station length to cross
Double end tenoner
Turning station length to cross
Double squaring and edgebanding
Turning station cross to length
Vacuum stacker
1.01 FEEDER, type CAR MS 2000
2-lane
1.02 TURNING STATION LENGTH-CROSS, type TR 1... more
|
|
|
|
6
1 piece double-sided format processing machine for longitudinal and cross-machining of large formats
Fixed stop side right, movable side left
Basic machine:
- with a continuous machine stand and aggregate carrier,
prepared for the setup of the format processing units
Double
- including basic length noise protection for format processing part
Bfj0xqmsxd
with central suction
Workpiece transport equipment:
- continuous chain tracks
- rolling block link chain with ball bearings on runni... more
|
|
15
LINE (half line) of Double-side Sizing-Milling & Edge Banding, with max working width mm 2500, with automatic fast handling system. Composed of the following machines:
ZV0200A) LOADER (SINGLE-CAGE) "BARGSTEDT" TBH 500 / EL / 25 / 12
ZV0200B) TURNING DEVICE FOR PANELS (LENGTHWISE TO CROSSWISE)
Bygwfevt
"HOMAG" TDL /310 /25 /12
ZV0200C) Double-side SIZING and EDGE BANDING machine "HOMAG"
ZV0200D) TURNING DEVICE FOR PANELS (CROSSWISE TO LENGTHWISE) "HOMAG" TDL 510/25/12
ZV0200E) UNLOADER... more
|
|
5
Edge banding line with softforming
Brand: IMA
Type: Combima
9nwd92vfj
consisting of:
- Double sided edge banding machine
IMA COMBIMA für lengthwise processing
- Rotation device
- Double sided edge banding machine
IMA COMBIMA for crosswise processing more
|
|
7
Achern-Gamshurst, Germany
dealership location
6581 km
1997
good (used)
One-sided machine in good condition
KL 77 / A20 / S2
Bfsjzamc
Feed 18-24 m / min
Working height 950 mm
Working width at 22 mm Material min 55 mm
Working width at 55 mm Material min 100 mm
Workpiece thickness 12-60 mm
Edge material 0.4-20 mm
Total length 9,300 mm more
|
|
7
Wermelskirchen, Germany
6415 km
1978
unexamined (used)
Machine number 0-202-25-0223, consisting of vacuum loading MEINERT HSD-V 160, BJ 1978, with 2 duct roller coves and vacuum portal loading with 4 vacuum suckers as well as belt conveyor belt to the machine, double-sided format processing machine, equipped with Double sanitizers at the top and bottom, Vertically, 4.4 kW each, 1 double spaner horizontally with 2 aggregates, swivel, 2 x 4.4 kW, rental part with melting unit, 2-fold edge magazine and soft-forming pressure zone, followed by universal ... more
|
|
6
IMA Combima Line
Fully rebuilt in 2010
Double sided sizing and edge processing machine with angular transfer, length approx. 28,5m,
width approx. 12,0 m
- Processing of solid wood, veneered and melamine faced chip board possible
- Feed speed up to 28 m/min.
- Work piece sizes 260 – 2500 mm
- Work piece thickness 10 – 45 mm (possibly even thinner panels)
1. Feeding table with turning station
2. Combima I
- 2.1 Sizing section with controlled milling and double hogging station
- 2.2 Reb... more
|
|
4
double-sided machine to the work piece edge format
Edge banding and manipulating various edging materials
roll up to 3 mm edge thickness.
Use as the first machine in a production line for longitudinal pass.
Fixed stop side left, moving right
Base machine:
-with continuous machine frame
-Glue rollers feed stop
-Glue container stroke feed stop
-Glue container clamp workpiece pressed.
Workpiece transport facilities:
-rolling block link chain with ball bearings
-Chain conveyor with precise, harden... more
|
|
10
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,3 -3 (1° pass.)
Panels thickness (min/max) mm 12 / 40
Working width (min/max) mm 220 / 2500
Numerical Control /Software NC21 / HOMATIC
Adjustable feeding speed (m/min) 15 - 40
Safety and sound-proof enclosures/cabins
SIZING PART (for each side):
Anti-chipping Milling Unit (1 x Kw 4,5)
Hogging Units KD 11 (Kw 6,6 x 2)
Free space
Spraying unit (Anti-sticking liquid)
EDGE-BANDING PART (fo... more
|
|
5
Edge processing line
Brand: IMA
Type: Combima
Year: 2007
Technical data:
Nml27
Workpiece:
- Length: min. 236mm, max. 2000mm
- Width: min. single sided (with a chain) 126mm
at min. workpiece length 266mm, only lengthwise processing without copying)
min. double sided 236mm
max. 1300mm
- Thickness: min. 13mm, max. 40mm
Smallest workpiece double side process 236x236x19mm
Smallest workpiece single side process 266x126x19mm*
*Processing with miller behind the short chain
Biggest workpiece: 2000x... more
|
|
4
Varaždin, Croatia
7257 km
ready for operation (used)
Used 4-side edge banding machine is for sale. Ready for use.
Lotzx30f more
|
|
6
Tatabánya, Hungary
dealership location
7315 km
1987
good (used)
The procession line compound:
1, MEINERT HSD-V sheet feeder
2, IMA-NORTE Combina / II / 1175/V/SRL16 two-sided procession line
3, MEINERT DK/10 sheet rotator
4, IMA-NORTE Combina / II / 1220/V/SRL16 two-sided procession line
7, MEINERT Am35 sheet park
Stations(double):
-Feeder, roll container conveyor
-Ripping, cutter
-Milling, soft edge milling
-Glue tank, edge foil feeder, cutter
-Lath unit, press zone, heater (only when the 3rd point inactive)
-Cutting of the rest of the edge with foil or ... more
|
|
5
Bucharest, Romania
8003 km
2009
good (used)
Description
Brand IMA
Model Combina R
ID SH3972
Status Price reduced
Price 133.000 € + VAT
Year of manufacture 2009
Location București / Bucharest (RO)
Double sided edgebanding machine. Turning table included.
Bbfar7mjv3
Model: IMA I - COMBIMA K / II / R60 / 520 / R, equipment weight - 7500 kg.
Model: IMA II - COMBIMA K / II / R70 / 560 / FR3, equipment weight - 8500 kg.
Voltage - 380 V / 60 Hz - 3 phases. Rated Amperage - 160 A.
One refurbished in 2009 and the other manufactured in 2009. ... more
|
|
10
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 12 / 40
Working width (min/max) mm 225 / 3000
Cq9elkmg
Numerical Control PC 22 /Software WoodCommander
Adjustable feeding speed (m/min) 15 - 40
Without Transmission bar (Master & Slave system)
Safety and sound-proof enclosures/cabins - Adjustable working line (work units support tables)
SIZING PART (for each side):
Spraying unit (Anti-sticking liqui... more
|
|
5
Kantenbearbeitungsstraße
9ttnnms
Fabrikat: IMA
bestehend aus:
Maschine 1
Drehkegelstation
Maschine 2 more
|
|
10
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3
Panels thickness (min/max) mm 12 / 40
Working width (min/max) mm 220 / 3000
Numerical Control /Software POWER CONTROL PC 22
Adjustable feeding speed (m/min) 15 / 40
Safety and sound-proof enclosures/cabins
SIZING PART (for each side):
Anti-chipping Milling Unit 1 x Kw 4,5 ca.
Hogging Units 2 x Kw 6,6 (KD 11)
Free space
EDGE-BANDING PART (for each side):
Glueing Unit (Hot Melt G... more
|
|
1
Edge processing line
IMA Combima
consisting of:
Machine I:
used edgeprocessing machine IMA type Combima fully reconditioned with 12 month warranty
- working width 1500 mm, edge thickness 0.3 - 3 mm
- rolling chain, motor 3 kW for a speed 9 - 45 m/min.
- electronical width adjustment
- double hogging unit with 2 motors 4.4 kW, 100 Hz
- milling unit with 1 motor 4.4 kW, 100 Hz
- gluing unit with 2-coil magazine with premelting unit
- endtrimming unit with 2 motors 0.4 kW
- roughm... more
|
|
6
LINE of Double-side SIZING-SQUARING and EDGE BANDING, max working width mm 2500
Composed of the following machines:
U06051) Motorized rollers Table "HOMAG" Mod. TBL 100/25/12/S to infeed workpieces/panels
U06052) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. Profi KFL 525/8/A3/15
Yrghxk
U06053) In-feeding Rollerway "HOMAG" Mod. Profi TDL 310/25/12 with 90° Turning device (from lenghtwise direction to crosswise direction) with double cone system
U06054) 2nd Double-side Sizing & Edge Band... more
|
|
5
Edge processing line
Year: 1999
1 1/2-sided edge processing machine
Brand: Homag
Type: KL21/06/20/QA/30
Feed speed 10-32 m/min
Workpiece dimensions:
Workpiece strength 8-50mm
Workpiece width: 80-2800mm
Workpiece length max. 5000mm
Equipment:
12 fold edge magazine for thin edge
24 fold edge magazine for thick edge
Single sided edge processing machine
Brand: Homag
Type: KL10/22/QA
Feed speed 10-32 m/min
Workpiece dimensions:
Workpiece strength 7-60mm
2mehly8f9
Workpiece length max. 5000mm
E... more
|
|
6
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (tape) thickness in rolls (min/max) mm 0,3 - 3
Panels thickness (min/max) mm 12 - 45
Working width (min/max) mm 2200 - 2500
Numerical Control /Software PC 22
Adjustable feeding speed (m/min) 15 - 50
Safety and soundproof enclosures/cabins
Working line (work units support tables), manual adjustment
Distance (centeraxes) of the Disappearing Dogs (mm) 1000
SIZING PART (for each side)
Antichipping
Milling Unit Kw 4,5 x 1 RpM 600... more
|
|
6
Double side - First (1st) machine in a line Machine
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 12 - 40
Working width (min/max) mm 250 / 2500
Numerical Control /Software Power Control 22 / woodCommander
Adjustable feeding speed (m/min) 15 - 35
Safety and sound-proof enclosures/cabins
Working line (work units support tables), manual adjustment
SIZING PART (for each side):
Hogging Units KD 10 (2 x Kw 6,6)
Free space
Milling grooving unit SF 20 (1 x Kw 6,6)
Sp... more
|
|
6
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 12 - 40
Working width (min/max) mm 250 / 2500
Numerical Control /Software Power Control 22 / woodCommander
Adjustable feeding speed (m/min) 15 - 30
Safety and sound-proof enclosures/cabins
Dvzszinou
Working line (work units support tables), manual adjustment
Distance (center-axes) of the Disappearing Dogs (mm) 500
SIZING PART (for each side):
Anti-ch... more
|
|
15
DOUBLE-SIDE EDGE BANDER
Edges (band in rolls) thickness (Min/Max) mm 0,3/3
Edges thickness in stips / lippings (min/max) mm 0,4/12
Panels thickness (min/max) mm 12/60
Working width (min/max) mm 240/2500
Numerical Control NC 21 (HOMATIC)
Feeding speed (adjustable) m/min 10/32
Top pressure system with rubber belt
Panels in-feed system
Pre-milling Unit (vertical joint trimmers) 2 X kW 4
993svmdlw
Lamps to heat the workpieces side
Glueing Unit (Hot Melt Glue + Quick Melt system)
Band Pressure zone ... more
|
|
13
Roreto Di Cherasco (CN), Italy
dealership location
6766 km
as good as new (ex-display)
FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines:
VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12
Bbk9ge99zr
VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15
VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from
lenghtwise to crosswise) with double cone system
VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30
VZ0200E) I... more
|
|
6
DOUBLE-SIDE EDGE BANDER
- Min/max edges (band) thickness in rolls mm 0,3 - 3
- Min/ max panels thickness mm 12 - 40
- Min /max working width mm 250 - 2500
- Numerical Control: Power Control PC 22
- Feeding speed (adjustable) m/min 10 - 32
- Top motorized pressure belt
Bkthdfjo
- Pre-Milling Unit (Vertical joint trimmers) with N.C. adjustment (2 x Kw 4 at 9.000 RpM)
- Glueing Unit (Hot Melt + Quick Melt system) with N.C. adjustment: A3
- Pressure Zone (manual adjustment): "A"
- Edge coils supp... more
|
|
10
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 12 / 40
Working width (min/max) mm 220 / 2500
Numerical Control /Software Power Control 22 / woodCommander
Adjustable feeding speed (m/min) 15 - 40
Safety and sound-proof enclosures/cabins
Distance (center-axes) of the Disappearing Dogs (mm) 500
SIZING PART (for each side):
Bezw3ael3f
Anti-chipping Milling Unit (1 x Kw 4,5)
Hogging Units KD 11 (2 x K... more
|
|
15
Double-side Sizing & Edge Banding - First Machine (1st in a line)
Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine)
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 10 / 90 (*)
Working width (min/max) mm 70 / 1200
Numerical Control /Software PC / SINTRA
Adjustable feeding speed (m/min) 10 - 40
Safety and sound-proof enclosures/cabins
Working line (work units support tables), manual adjustment
SIZING PART (for each side):
Spraying... more
|
|
15
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 8 / 100
Working width (min/max) mm 240 / 3000
Numerical Control /Software Power Control PC 22
Adjustable feeding speed (m/min) 10 - 50
Working line (work units support tables), adjustment by N.C.
SIZING PART (for each side):
Anti-chipping Milling Unit 1 x Kw 6,6 (NC adjustment)
Hogging Units 2 x Kw 11 (KD 10 - NC adjustment)
Pre-Milling unit 2 x Kw 6,... more
|
|
10
Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 8 / 45 (option: mm 60)
Working width (min/max) mm 236 / 1800
Numerical Control /Software ICOS Open
Adjustable feeding speed (m/min) 10 - 50
Without Transmission bar (Master & Slave system)
Safety and sound-proof enclosures/cabins
SIZING PART (for each side):
Spraying unit (Anti-sticking liquid)
No. 1 Free space
Nmwev
Hogging Units 75.30 (2... more
|
|
15
LINE (half line) of Double-side Sizing-Milling & Edge Banding, with max working width mm 3000, with automatic fast handling system. Composed of the following machines:
VZ0600A) LOADER (Portal) "TOMASSINI" Mod. Genius with double station and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader.
VZ0600B) Infeeding Rollerway, with TURNING Device "HOMAG" TD 31/30/12 with double cone
Cdr9muew
VZ0600C) Double-side SIZING and ED... more
|
|
10
DOUBLE-SIDE EDGE BANDER
Bclrfjo9v0
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 (*)
Panels thickness (min/max) mm 12 / 40
Working width (min/max) mm 240 / 2500
Numerical Control NC 21 (HOMATIC)
Feeding speed (adjustable) m/min 10 - 32
Top pressure system with rubber belt
Pre-milling Unit (vertical joint trimmers) 2 x Kw 4
Glueing Unit (Hot Melt Glue + Quick Melt system) A3 (QA34)
Band Pressure zone C
Edge coils supporting unit (reels N°) 2
Snipping (end-cutting) unit HL 84/85 (2 x Kw... more
|
|
15
FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling.
With also 2 through-feed machines for the panels drilling and the dowels inserting processes.
MINIMUM workpieces WIDTH (MIN. working width): mm 70
Cnh7lhpw
Composed of the following machines:
VZ0350A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C
VZ0350B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Omnia SB1 / 8.5
VZ0350C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Omni... more
|
|
15
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3
Edges thickness in strips/lippings (Min/max) mm 3 / 10
Panels thickness (min/max) mm 8 / 60
Working width (min/max) mm 274 (320) / 3300
Numerical Control /Software ICOS Open
Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system)
Distance (center-axes) of the Disappearing Dogs (mm) 1080
SIZING PART (for each side):
Anti-chipping Milling Unit 75... more
|
|
15
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Edges thickness in strips/lippings (Min/max) mm 3 / 10
Panels thickness (min/max) mm 8 / 60
Working width (min/max) mm 236 / 3300
Numerical Control /Software ICOS Open
Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system)
G0sjlan
Distance (center-axes) of the Disappearing Dogs (mm) 1080
SIZING PART (for each side):
Anti-chipping Milling Unit... more
|
|
15
Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 8 / 45
Working width (min/max) mm 220 / 1300
Numerical Control /Software ICOS Open
Csdhihlfq
Adjustable feeding speed (m/min ) 10 / 50
Without Transmission bar (Master & Slave system)
Safety and sound-proof enclosures/cabins
Working line (work units support tables), manual adjustment
SIZING PART (for each side):
Hogging Units 75.30 (2 x kW... more
|
|
12
Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line
Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3
Panels thickness (min/max) mm 8 / 45
Working width (min/max) mm 236 / 1300
Numerical Control /Software ICOS Open
Adjustable feeding speed (m/min ) 10 / 50
Without Transmission bar (Master & Slave system)
Safety and sound-proof enclosures/cabins
SIZING PART (for each side):
Spraying unit (Anti-sticking liquid)
Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x ... more
|
|
15
Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line
Edges (tape) thickness in rolls (min/max) mm 3
Panels thickness (min/max) mm 12 - 60
Working width (min/max) mm 1300
Numerical Control /Software IMATRONIC 150
Adjustable feeding speed (m/min ) 9 - 45
SIZING PART (for each side):
Hogging Units 75.30 (Kw 8 x 2)
Jumping shaping units 75.34 (Kw 6,6 x 1)
Fine Trimming unit 08.0582 (Kw 1,85 x 2) 0°-30°
Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30°
EDGE-BANDING PART (for each ... more
|
|
15
Double side - Independent Machine (or 1st and/or 2nd in a line)
Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3
Panels thickness (min/max) mm 10 / 45
Working width (min/max) mm 280 / 3300
Bcl2d3h72h
Numerical Control /Software IMATRONIC
Adjustable feeding speed (m/min) 9 - 45
Without Transmission bar (Master & Slave system)
Distance (center-axes) of the Disappearing Dogs (mm) 540
SIZING PART (for each side):
Top Scoring unit 75.30.0.004 (1 x Kw 2,2) adjustable by N.C. (vertically and horiz... more
|
|
15
LINE (half line) of Double-side Sizing-Milling & Edge Banding, with max working width mm 3300, with automatic fast handling system. Composed of the following machines:
V03029) LOADER (Portal) "TOMASSINI" Mod. Genius C2/7000 L with double station and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader.
Gvngdk
V03030) Infeeding Rollerway, with TURNING Device "IMA" with double cone
V03031) Double-side SIZING-EDGE BANDING ma... more
|
|
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Edgebanding machines
Dealer for Edgebanding machines
