|
5
Machine Noeml Built: 2009 Condition: Maintained Equipment and technical data: Working area X-axis mm 3000 Working range Y-axis mm 1300 Working area Z-axis mm 100 Max workpiece dimensions L/W/S mm 3000X1300X80 Speed X-axis m/1' 25 Speed Y-axis m/1' 25 Speed Z-axis m/1' 20 Speed milling spindle U/1' 0-20.000 Speed Drilling spindle U/1' 3200 Milling motor strength kW 7 Drilling motor strength kW 2.2 Number of drilling spindles 15 Vacuum pump m3/h 100 Diameter suction nozzle mm 160 Incl. tool chang... more
|
|
3
53797 Lohmar, Deutschland
6428 km
ready for operation (used)
Year of construction: 2015, current machine location: Heinsberg district,, processing length in X=200 mm 3200 mm, machining width in Y=70 mm 920 mm, material thickness of 8 70 mm, height-adjustable inlet 4-sided milling, drilling unit 7883 / 15 spindles, 9 vertical and 6 horizontal drilling spindles, 1 circle vacuum system, manual control unit, automatic central lubrication unit, main spindle 7.5 kW S6, HSK 63F tool holder, 6x tool changer Nncal more
|
|
15
7000 X 2500 X 2700 mm Weight: Approx. 7000 kilo Software: ImaWop 1.1 Programming basics ISO Machine language NUM 1060 M Quite simple programming with workpiece length, workpiece width and height. With 4 axes and full-fledged C axis. 9xpmh3hm Workspace X 3000 Working area Y 1000 Working area Z 75 Main motor kW 8.5 4. Axis C-axis Tool change points 8 Drilling spindles vertical 14 Y.O.M.: 1995 more
|
|
12
Working piece length max. 4000 mm (single); 1375 mm (Pendulum)- All units 4175 mm (single); 1375 mm (Pendulum) tool diameter 25 mm Working piece width max. 1100 mm- front; 1325 mm- back (All units) 1550 mm- back (tool diameter 25 mm) Working piece thickness max. 270 mm incl. clamping medium up to max. 60 mm with standard clamp without restriction Travel speed X axis / Y axis = 85 m/min Z axis = 25 m/min Working table Raster table Dual circuit vacuum system Positioning Led strip of l... more
|
|
6
Morbidelli Author 504 machining center Producer: Morbidelli Model: Author 504 Production year: 1998 Number of spindles: 2, 6.6 KW main cutter and rotary cutter Vsscli Total output power: 20 kW more
|
|
5
Hochheim am Main, Germany
dealership location
6537 km
1995
used
Second-hand machine Built in 1995 Status: work place checked X-axis 1390 mm Y-axis 740 mm Speed X-axis up to 35 m / min Speed y axis up to 35 m / min maximum plate thickness 50 mm Bekx0jc83x Workpiece length max 1390/2800 mm plate X/Y-Acshen CNC-controlled Pneumatically controlled Z axis with automatic-5 linear gun and hydro brake 5 single accessible vertical spindles 1 horizontal spindle 1 Nutsäge X diameter 100 mm Vacuumspannanlage with vacuum pump 16... more
|
|
4
53797 Lohmar, Deutschland
6428 km
ready for operation (used)
Year of construction: 2011, current machine location: CochemZell district,, travel speed X/Y = 50 m/min, travel speed z = 15 m/min, workpiece length: 2003050 mm, workpiece width: 70850 mm, workpiece thickness: 1260 mm, drilling gear V13 HIGH SPEED, Speed range: 15007500 rpm, horizontal drilling gear with 4 spindles, groove saw in X direction, 5 kW S1 milling spindle, speed range: 600018000 rpm, 3D simulator, Wood Wop programming system, machine in best condition with few hours of operation, mach... more
|
|
7
Control System: Weeke MCC Spindle: Speed: 7.500 rpm Taper: HSK-F63 Clamping surface: Technology Workpiececlamping: Vacuum block suction Vacuum block suction: 18 units, 3 each stop array Clamping surface: 160 x 114 mm each Block Workpiecdimensions (max.): 3.250 x 1.500 x 125 mm In general: Toolmagazin: 2x Diskmagazin, each 14 stations Beeriefpoo Movement in X/Y/Z: 4.180/2.180/348 mm Rapid traverse in X/Y/Z: 110/110/20 m/min Equipment / Accessories: Vacuumpump: 6,0 kW, 3.00... more
|
|
13
Machine No. AL3616 Working area 3200 mm x 1000 mm Max. workpiece thickness 80 mm C axis Moving speed 45 m/min X and Y axis ; 21 Z-axis Work table / console table 8 Consoles Milling unit 6,6 kW 9000 – 18000 rpm Drilling unit with 29 spindles 15 Spindles in X direction 14 Spindles in Y direction 4 Horizontal drilling units with 8 spindles 3x2 Spindles in X direction 1x2 Spindles in Y direction Toll changer Tool holder quick clamping system ISO 30 Control ESA TRIA 7500 Vacuum... more
|
|
2
12 kW reconditioned motor (by Homag works) 12000 - 18000 r/min M29e7wcl Working hours since recond: 0 more
|
|
4
Machine Built in 2004 Condition: Very well maintained HOLZ-HER Processing Center ECO-Master 7120 K GRUNDMASCHINE (without tools): -Driving stands in single-arm version -Machine rack in welded construction with polished prism guides -Rack drive in X direction, ball thread tweaking in Y-and Z direction for precise positioning Technical data: The technical data refer to the standard machine When the basic machine is extended, the dimensions change. Editing measurements: max. workpiece size for swi... more
|
|
4
34123 Kassel, Deutschland
6552 km
ready for operation (used)
Year of construction: 2012, motor voltage: 3x 400 V, motor frequency: 50 Hz, weight (kg): 1500 kg, operating hours: 137, ideal for body processing, travel distances (X,Y,Z), number of spindles vertical: 10 pcs., number of spindles horizontal: 6 pcs.,, X axis:, Max. workpiece length unlimited, min. workpiece length: 200 mm, travel speed: 0 25 m/min., Y Axis:, Max. workpiece width: 1000 mm for all units, min. workpiece width 100 mm, travel speed: 0 50 m/min., Z Axis:, Max. Workpiece thickness: 60 ... more
|
|
9
Model / type B4.40, is in good condition, the machine is CE-marked, with CNC control, is with 4 axles, with closed cab, with chip conveyor, work above the workpiece, working height 180 mm, working width 1580 mm, working length 3390 mm, engine power 22 kW, the Engine of the machine is designed for 400 volts, with 12 tool holders, with groove milling motor, number of drill heads 3 pieces, number of drill spindles 34 pieces, machine width 4650 mm, machine height 2000 mm, machine length 5865 mm, mac... more
|
|
11
Biesse Rover C 6.65 Config. 2 – Year 2010 – EPS system - Uni Clamp Woking feld in : X 6200mm Y1535mm Z 250 mm Max length of working piece when production on left/right side : X 2400mm 9080661 Biesse Rover C 6.65 basic machine 7350283 Division of vacuum and compressed air into 2 zones in X 7300618 10 ATS clamping beams length 1525mm and 30 mini jig holders 7350316 EPS-Automatic positioning of beams and mini jig holders 7350430 10 stops at the rear with a stroke of 115mm 7350422 10 stops... more
|
|
7
CNC WORKING CENTER type ALBERTI EDIT 3000 second hand machine composition : 1. boring head with indipendent mandrins X - Y , horizontal and vertical 2. vertical router 3. horizontal router CNC 90 by TPA C0mnxhbj volt. 380/50 more
|
|
2
Barntrup, Germany
dealership location
6496 km
used
Tool adapter with chuck total height 195 mm Qmg3gthdf 10 pcs with 25mm clamping more
|
|
5
Lennestadt, Germany
6465 km
2002
excellent (used)
IMA computer for milling and / or gluing machines of the 310-680 series. Ideal as an exchange of the no longer available IMA computer and hard disk. Included in the delivery is a version IMAWOP 3.0 with software dongle. The computer is tested and stored for about 10 years. Scope of delivery: Computer (PC) Bduwoac9n2 keyboard IMAWOP 3.0 software dongle on requ... more
|
|
1
6060, Österreich
6881 km
ready for operation (used)
Motor power: 16.3 HP / HP (12.0 kW), year of construction: 2018, motor voltage: 3 x 400 V, type: profit H500 16.38, motor frequency: 50 Hz, optical status indicator of the machine, chip conveyor for waste pieces and remaining chips, additional sealing of all tours, automatic Length measuring systems of the tool in Z, vacuum and compressed air activation for each console 6 consoles with 3 controlled compressed air connections per console, continuous fence in the direction of Y, 2 pieces screwed, ... more
|
|
4
Machine Built: 1997 Condition: maintained Control: ESA TRIA 10500 Console table with a working area of 2600 x 700 mm workpiece thickness max. 55 mm 9 vertical drilling spindles Nnz2f Milling spindle with 3 kW Saw unit in X Availability: short-term Location: Röllbach more
|
|
10
HOMAG PROFI BOF 322 / 60 / F / AP - MACHINING CENTER Electronically controlled 5 and 4-axis milling and drilling center for machining furniture parts, solid wood or similar materials. Machine details: - Path feed rate: - Max. 80 m / min. in the X direction - Max. 80 m / min. in Y direction - Max. 30 m / min. in Z-direction - Z-axis, traveling way 800 mm - 2 water ring vacuum pumps each with 66 m3 / h (equivalent to power per 100 m3 / h rotary vane vacuum pump) - Worktable:... more
|
|
8
Jelenia Góra, Poland
6957 km
2015
good (used)
The DIGIMA E9 2030 D machining center was built in 2015. The machine is designed for machining wood, plywood and plastics. Lli0bzc8 Technical parameters : - table size: 2050 x 3050 mm - work space (X, Y, Z): 2000 x 3000 x 850 mm - maximum spindle speed: 22000 rev / min, inverter - HSD (Italian) spindle: 10 kW, liquid cooling - X-axis movement: 3000 W servo drive, toothed rack - Y axis movement: 2 servo drives 2000 W, toothed bars - Z axis movement: 2000 W servo drive, ball screw - TH... more
|
|
5
Barntrup, Germany
dealership location
6496 km
2001
used
CNC processing centre Brand: IMA Type: BIMA 210 120/400 Year: 2001 Technical data:Processing area-in X-direction 4000 mm-in Y-direction 1200 mm 17 inch coloured display to enter and monitor all data and functions. Manual operation via menu of the operation [...] program control with operator guidance through an extensive operation surface and firmware.- Operation surface for the creation of CNC-programs during the processing through the comfortable, grafical orientiated operation surface IMAWOP... more
|
|
5
Lennestadt, Germany
dealership location
6465 km
2001
good (used)
For the commission-driven drilling and pressing of hinges as well as drilling 3fptyaaqr Of handle and lock holes and indentations for special fittings and additional bores Up and down at doors. Workpiece dimensions: • Length: 300 mm 2500 mm • Width: 200 mm 800 mm • Thickness: 16 mm 30 mm • The workpiece width must not be greater than the workpiece length! Working height: 970 mm more
|
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
