Used Biesse Rover 30 for sale (324)

Condition: used, Ferwood Code: RU0000986 - Condition: Used - Compatible Machine: CNC BIESSE ROVER - If interested we offer a revision service, contact us. Noljvazkfjhcdwyela

Year of construction: 1998, Condition: good (used), Full composition Nslsf Sqyvshcdwyola

Condition: ready for operation (used), Year of construction: 2008, ROVER A 3.30 K4 - CNC machining center Working area: X = 3060 mm; Y = 1260 mm; Z = 150 mm 9080345 Automatic lubrication system 6 ATS workpiece supports - L = 1200 mm - 18 module supports 6 stops with 115 mm stroke 6 stops with 15 mm stroke positioned 970 mm from the rear Nlolhewdnqxjcdwyoa Side stops with 15 mm stroke, complete with pneumatic equipment Narrow part clamps 12 vacuum modules 132 x 146 x H48 mm 6 vacuum modules 132 x 75 x H48 mm Chip conveyor belt integrated into the machine bed Vacuum pump 250 m3/h Auxiliary vacuum system Flange for preparing a milling spindle for use with an angle unit 360° C-axis Drill head BH 21 L Turret tool magazine with 18 pockets Remote control functions CNC control XP600 Graphical operator interface BIESSEWORKS Air conditioning system Safety devices with two front safety mats and rear and side protective grilles 7350283| Division of the vacuum system into two independent work areas in X. Division of the pneumatic system into two work areas in X. 7300510| Chip conveyor belt integrated into the machine bed 50820 250 m3/h vacuum pump instead of the 90 m3/h pump WORK UNITS 7212013| 360° rotating work unit (C-axis) with gear drive, for machines with preparation 7212006| 12 KW (16.1 HP) electric spindle with HSK F63, air-cooled NC-Hops 4-axis machine license version 4 The tool shown is not included in the scope of delivery. Location: from customer location - Available: end of May 2025 -

Condition: used, machine/vehicle number: 007835, X axis working area: 3060 mm Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Njlhcdewb Siyowyela Number of controlled axes: 3 axes Total number of drilling spindles: 21 Total number of tool changer positions: 10

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Njlhov Aacfjcdwyela

Condition: ready for operation (used), Technical characteristics 3-axis spindle, 11 kW, 1000 to 24000 rpm 10 Y / 10X vertical drilling unit 6 X / 2 Y horizontal drilling unit XNG digital control 8-position on-board tool loader + pick-up loader on frame Machine to be restarted Nljlst Rrdaohcdwyoa dimension plan de travail en Y1640 mm Dimension plan de travail en X3430 mm Caractéristiques usinageDrilling unitOnboard tool chargerNesting table Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics useful fields: 6000 x 1772.5 mm 1 4-axis spindle with HSK 63 tool charger, 12 positions 28 drilling spindles including 8 horizontal 10 mobile beams with 3 suction cups + vices Machine to be restarted Course d'axe Y1850 mm Course d'axe X6860 mm Course d'axe Z275 mm Nombre de ventouses3 Nombre de poutres10 Capacité pompe à vide100 m3/h Nlsljtqkbiehcdwysa Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics 8 suction cup beams + vices Electrospindle 10.5 CV ISO 30 Nolstqkbbjhcdwysla 8 on-board tool carrier charger 20 vertical spindles and 4 horizontal spindles drilling unit Machine to be restarted dimension plan de travail en Y1630 mm Dimension plan de travail en X3430 mm dimension plan de travail en Z185 mm Nombre de poutres8 Caractéristiques usinageEvacuation conveyorVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 36784, BIESSE Rover 24 L machining center Nolovz Utiehcdwyjla Composition: - X: 4500mm Y: 1300mm Z: 180mm - 4 Axes - BIESSE WORKS program - Spindles ISO 30-1 - Automatic Central System of lubrication - Total power 35kw - Vacuum pump of 250m3/h - ATS work table with 4 suction cup trolleys -Predisposition for ATS vices and pliers -16 suction pads - Horizontal milling head 5 HP - Vertical and horizontal drilling block 16 chucks -Evacuation belt chip -Remote control of speed control, axis movement

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 09220, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 663 mm, workpiece height (max.): 275 mm, MACHINE DETAILS Configuration: 3 (see brochure as PDF) Tool configuration: P1/A1 Travel X / Y / Z: 6200 / 1935 / 275 mm Speed: 100 / 300 / 300 m/min Compressed air supply Compressed air consumption: 400 Nl/min Operating pressure: 7 – 7.5 bar Compressed air connection: Ø 3/8" Extraction Extraction air consumption: 5,300 – 7,632 m³/h Air velocity at main connection: 30 m/s Static pressure at main connection: 2,800 – 3,000 Pa Extraction connection: Ø 250 mm MACHINE DETAILS Installation dimensions: approx. 9.6 x 4.7 x 2.0 m Transport weight: 7200 kg Nlolhcdwswa Sdusyoa Installed power: 22 – 52 kVA Transport packages: 4 Documentation available: Yes CE marking available: Yes

Condition: used, machine/vehicle number: 007703, X axis working area: 3765 mm Y axis working area: 1560 mm Nlolhcdjvnw I Aowyea Working Table: Flat table Main Electrospindle power: 16 KW Number of controlled axes: 3 axes Total number of drilling spindles: 21 Total number of tool changer positions: 21

Condition: used, Year of construction: 2016, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Disc tool changer: Yes Pickup tool changer: Yes Vertical drilling spindles: 10 BIESSE Drilling aggregate BH 10: Yes Gantry machine: einseitig angetrieben Machine table: Matrix table Pendulum machining: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Suitable for nesting: Yes Labelling: Yes, manually Safety device: Light barrier, Bumper Interface for .dxf data: Yes Tool charge measurement: Yes Automatic lubrication: Yes Control cabinet cooling: Yes Remote control: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID Conformity marking: CE mark, EAC mark Nlolhcev A Ainodwyja Total connection: 23 kW Weight: 3.600 kg

Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Nlslhcdwsufggwsyja Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 36901, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, nominal power (apparent): 28 kVA, controller model: Biesse Works, spindle motor power: 1,500 W, number of spindles: 1, number of slots in tool magazine: 10, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is in good condition. 2 years ago had a general renovation. 8 panel supports 1525mm length, 24 sliding bases Drilling Unit, BH 22L 250m3 Vacuum pump 5-axis, 15 kW Electrospindle with HSK63 adapter, liquid cooled Works with HSK63 Safety fence and carpets Nlslhcswfri Ujdwyea Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas Pneumatic system for lifting bar supports Revolving tool changer with 10 places Automatic lubrication system Set of tools. Machine is on site, working.

Condition: used, BIESSE ROVER35XL MACHINING CENTER Automatic bridge and suction cup movements Nolhcdwswcl Tboyela 2 router heads, vertical and horizontal drilling 2 tool changers 4th axis tooling included

Condition: excellent (used), Year of construction: 2014, Biesse ROVER B FT 2231 G machining center with unloading Manufacturer : BIESSE Model : ROVER B FT 2231 G Nlelhcdou U Ratewyea Year of manufacture : 2014r Unloading table - belt. The Biesse ROVER B FT 2231 G is ideal for manufacturers of furniture, doors, home furnishings and other products requiring precision processing of board materials. With the ability to perform nesting operations, the machine allows efficient use of material, reducing waste and increasing production profitability. Technical data: - Flat Table (FT): Ideal for nesting operations, it allows optimum use of material and minimization of waste. - X working area 3,200 mm - Working area Y 2,205 mm - Z working area 120 mm - Tool magazine spaces 14 - BIESSE BH 660 control - Software BIESSE B_NEST - Independent Z axes 2 - Number of milling spindles 1 - Number of revolutions max. 24,000 /min - Tool holder HSK-F63 - Electro-spindle 13.2 kW

Condition: used, machine/vehicle number: 007790, X axis working area: 3800 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 39 Nolhcdwovzc Smeyjla Total number of tool changer positions: 16

Condition: used, Year of construction: 2017, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 16 Disc tool changer: Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Matrix table Electronic supervision of the end-position of the stops: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Passmarkenerkennung: Yes Safety device: Light barrier Ionisiereinrichtung: Yes Nljlhjwc Tmcjcdwysa Interface for .dxf data: Yes Remote control: Yes Automatic lubrication: Yes Tool charge measurement: Yes Enclosed drag chain: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID, BIESSE B_NEST, BIESSE BSOLID DATENIMPORT, MICROSOFT WINDOWS 7 Registration mark recognition: Yes Conformity marking: CE mark Total connection: 31,21 kW Weight: 3.600 kg

Condition: used, Year of construction: 2005, Functionality: limited functionality, machine/vehicle number: 43007, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, total height: 3,200 mm, total length: 5,500 mm, total width: 4,400 mm, overall weight: 2,850 kg, CNC machine for woodworking Biesse Rover 22 S Milling and drilling unit Nljlhowck Hyecdwysa Pressure pump need fun regeneration. No computer screen included

Condition: not inspected (used), Code: 0470 Brand: BIESSE Model: ROVER 346 - Norme CE CNC working centre with 3 controlled axis for milling/drilling/forming of furniture, custom-made furniture, doors, panels, kitchens, bathroom furniture, wooden elements, plastics, composite materials - CE Standard Technical data: Sturdy structure with base consisting of two side uprights connected with an upper and lower beam Working range: X axis mm 3200 - Y axis mm 1325 Z axis stroke mm 130 Max panel passage thickness mm 115 Max programmable speed: X axis mt/min 76 - Y axis mt/min 75 - Z axis mt/min 15 Boring unit: N° 31 vertical spindles with centre distance mm 32 - N° 10 horizontal spindles for drilling on the 4 sides of the panel - Spindle rotation speed rpm 4000 Router unit: Electrospindle for vertical milling - Motor Hp 9 - cone attachment ISO 30 - rpm 1000-24000 Tool magazine for automatic 5-position tool change complete with cover Nlolhsviv U Rjcdwyea Circular saw unit: Blade diameter mm 160 - Motor Hp 5 - rpm 12000 N° 6 manually positionable work tables with pneumatic clamping Ball bearing supports for panel movement Counter-shapes Vacuum pump 100 m/cubic metres Numerical control CNI Installed power Kw 25 Compressed air 7 bar Overall dimensions: Machine mm 5730 x 1900 x 2480 h - Electrical panel mm 1100 x 650 x 2000 h Transport dimensions: Machine mm 5900 x 2250 x 2480 h - Electrical panel mm 1100 x 650 x 2000 h Weight kg 5900 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: used, machine/vehicle number: 006280, X axis working area: 3665 mm Y axis working area: 1260 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 18 Nljlhcjkw H Egodwyoa Total number of tool changer positions: 18

Condition: used, Year of construction: 2021, Working dimension X: 4.140 mm Working dimension Y: 1.570 mm Working dimension Z: 275 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 13 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Linear tool changer: Yes Tellerwechsler 13-fach: Yes Vertical drilling spindles: 17 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction BIESSE Drilling aggregate BH 29 2L: Yes Nelhcdewbankswysla Gantry machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Three stop ranges: Yes Electronic supervision of the end-position of the stops: Yes Workpiece support aids: Yes Number of consoles: 8 Pneumatic pipe connectors: an den Konsolen BIESSE Preparation for Uniclamp: Yes Positioning aid: Yes BIESSE SA machine table: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Barcode reader: Yes Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Automatic lubrication: Yes Remote control: Yes Package for abrasive materials: Yes Control: BIESSE BH 660, BIESSE bTouch Software: BIESSE B_SOLID, BIESSE BSOLID 5-ACHS-MODUL, BIESSE SOPHIA, BIESSE BSOLID DATENIMPORT Conformity marking: CE mark

Condition: used, machine/vehicle number: 007364, X axis working area: 3060 mm Nolhcdstz Hxaswysla Y axis working area: 1320 mm Working Table: Pod and Rail Number of controlled axes: 4 axes Total number of drilling spindles: 20 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 007738, X axis working area: 3280 mm Y axis working area: 1600 mm Njlhcdsvu If Sewysla Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Total number of drilling spindles: 28 Total number of tool changer positions: 28

Condition: used, machine/vehicle number: 007839, X axis working area: 4300 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Nslhsv Sf Ixscdwysla Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 16