Biesse for sale
Identified location: Ashburn (US) (Edit)
|
1
Horsham, United Kingdom
dealership location
5927 km
2007
used
Biesse AKRON 435 edgebander with Touch screen controller and automatic setting.
Technical Specification:
Model No AKRON 435
Serial No
Year of manufacture 2007
Guillotine yes
Front/Rear Saw yes
Top & Bottom Trimming yes with nc positioning
Corner Rounding yes 2 motor
Scraping yes
Buffing yes
Glue System hot melt
Bey2tdanmu
Machine Control Sintra Touch Screen
Min - Max Coil Thickness 0.4 - 3.0 mm
Max Lipping Thickness 6 mm*
Min - Max Heig... more
|
|
7
Single-sided edge banding machine Biesse Artech Akron 860, year 2003
Year of construction 2003
automatic edge banding up to 15 mm edge thickness
edge thickness: 0,4 - 15mm
Edge thickness in rolls: 0,4 - 3mm
Workpiece thickness: 8 - 60 mm
Workpiece thickness (forming trimming unit) 35 - 60 mm
Workpiece width (with length 140) min. 85 mm
Workpiece width (with length 250) min. 50 mm
Workpiece length min. 140 mm
Feed rate 11-14-20 m/min
Electric 400 V / 50 Hz
Connected load approx. 22 kW
Pneumatic ... more
|
|
9
Bitburg, Germany
6422 km
2007
excellent (used)
BIESSE CNC Miter Gears 4 compartment,
Dwdntu
different robust angle transmission used on BIESSE CNC machining centers, 4 outputs with 4 collets
HSK 63 F recording, good condition
Location: Off the shelf 54634 Bitburg more
|
|
13
|
|
7
Słomczyn, Poland
7215 km
2009
good (used)
Technical parameters:
Tare weight 9000 kg
X-axis working range 4490 mm
Working range of the Y axis 2600 mm
Operating range of Z axis 400 mm
Equipment
Body - portal with upper beam supporting X and Z axis trolleys, Y axis trolleys supported by the base.
Work table with guide rails and vacuum system for clamping workpieces.
Vacuum system. Electrospindle. Extraction suction cups.
Tool magazines.
Liquid cooling box type: WRA2040N20ZBS0.
Power cabinet with air conditioner type: EVE0800220Z000.
BU... more
|
|
8
MACHINERY READY FOR DELIVERY, FREE FOR SALE WITHOUT RESERVE WORK CENTER CNCPANTOGRAPH WITH ELECTRONIC CONFORMATION TO WORK AREA 1,600 1.600 x 1.600 x 300 MM.RUN X-axis = 4.300 MM; Y/W = 1.600 MM; Z=300 MMNR. 02 WORKING BANKS AND FIXING PEZZO IN BACHELITE RETICOLATANR. 01 VOID PUMP OF 250 M3/SINGLE STEEL MONOLITIC STRUCTURE THERMOSATED WITH STABILIZATION THERMICAVELOCITY ASSI X, Y and W MAX 80 M/MIN; Z MAX 25 M/MINLUBRICATION AUTOMATIC SKATES AND CHICHES A RICYCLE OF BALANCE C.N. OSAI SERIES 10/5... more
|
|
6
Horsham, United Kingdom
dealership location
5927 km
used
Used CNC Aggregate to suit Biesse HSK 63 Fitting
Mxzce9uj more
|
|
11
Övermalax, Finland
6643 km
1996
good (used)
Biesse dowel drilling machine
Model F 39 E
Born in 1996
S/N 61678
Total installed electronic power 4.6 kW Motor
39 Drilling spindles
32mm Intermediate axis between spindles
Maximum drilling depth mm: 65
400 V, 50 Hz, 3 phases, 3 phases
CE marking
Nklol
Weight Kg: 560 more
|
|
4
Biesse Rover 30 machining center 2001
- Work area 4500 mm x 1600 mm
- Workable thickness 200 mm
- N ° 1 Electrospindle 10 kw HSK AXIS C
- Tool changer at no. 7 positions
Xayvg
- 20 independent vertical spindles
- N ° 6 opposing horizontal spindles on X axis
- 2 opposed horizontal spindles on the Y axis
- Additional side tool magazine
- 8 shelves and 24 suction cups with display
- Bars for loading heavy pieces
- Carpet for chip evacuation
- 250 mc / h vacuum pump
- NC 1000 numerical control on P... more
|
|
6
Working center for flexible boring with fixed tools and mobile panels on air cushions, to work in real time. Skipper overcomes all these limitations using one simple solutions, through an air flotation table it moves the panels with respect to the tools which are fixed. The advantages are numerous and indisputable. Panels with different dimensions can be machined without interruption. The machine can work the panel simultaneously from above or below and can produce even two identical or mirrored... more
|
|
|
|
6
Biesse Rover 24 S- 4 axis - EPS - Year 2002
Very nice and clean machine from Norway
X-Y-Z-C - axis
Electronic position system - EPS - for vacuum cups and support beams gives very short time for changing of new position of beams and cups. Time saving option . It gives much higher capacity production output.
Working area X-axis: 3060 mm
Working range Y-axis: 1320 mm
Working range Z-axis: 155 mm.
Working range C axis 0-360 degrees
Milling spindle 7.5 KW HSK 63 F
Tool change places: 16 places
Dri... more
|
|
6
Horsham, United Kingdom
dealership location
5927 km
2005
used
Biesse Rover B4. 4axis 40FT Flat table CNC nesting router fitted with B19L drilling head, additional stops 9.0kw Electr0 spindle
SAFETY DEVICES
Front photocell barriers allowing pendulum machining
Back and side mesh guards
Emergency rope placed in front of the machine
sound-absorbing cover for the operating unit, with 3 rows of plastic strips
emergency button positioned on the NC
emergency button positioned on the remote keyboard
AUTOMATIC LUBRICATION SYSTEM.
Bey2qwxamm
At each time interval,... more
|
|
2
Biesse brand
Model * Rover 20
Anno1998
- Working area 2980 x 950 mm. - Piece passage H 60 mm. - 7.5 hp electro-spindle iso 30 - 3-position tool changer - boring head with 10 vertical spindles 2 + 2 horizontal in X 1 + 1 in Y - Blade integrated in the boring head direction x diameter 120 mm - Centralized lubrication
Bfvt2lyxmq more
|
|
10
Type: Cnc working center with edgebanding unit
Brand: Biesse
Year: 2006
Control: BIESSE WORKS
Working table type: bars, controlled by N.C.
N° of bars: 10
Vertical router: 4 axis, 4 Axis Kw 12, N° 2
Working dimensions X mm: 6200
Working dimensions Y mm: 1535
Working dimensions Z mm: 225
Boring head with n° spindles: 41
N° vertical spindles X: 17
N° vertical spindles Y: 12
N horizontal spindles in X: 8
N horizontal spindles in Y: 4
Automatic tools changer N positions: 22 positions, ... more
|
|
15
I sell the drilling heads suitable for Biesse Techno Logic 2000 and FDT machines.
All generally checked and functional with cash-back guarantee.
Atypical construction, Detaila for request.
No92d
Total 50 pcs.
Price 100 Euro / pc., sellable separately. more
|
|
15
Rubber Pressure Roller Wheels with Bearing for Edgebanders Edge Banding Machine
This rubber roller is one of the Edge banding machine accessories. It is edge conveyor roller, also called pressure roller.
The edge banding machine pressure roller with bearing, these wheels are widely used for edgebanding machines, automatic edge banders, automatic edge banding machines, such as edge bander Homag SCM, Biesse edgebanding machines, IMA automatic edge bander, KDT, Huali, Hold and other Chinese woodwo... more
|
|
15
Producer: Biese Manufacturing CO PVT LTD
Model: JADE 240
Production year: 2016
Power: 10 kW
Nominal pressure: 7 bar
Weight: 1650 kg
Bdovr8d7ov more
|
|
4
BRAND: BIESSE
Npslt
MODEL: * SKIPPER 100 L
YEAR: 2005
DESCRIPTION:
Size of the machinable panels
Length 90 - 3000 mm
Width mm 70 - 1000 Thickness mm 8 - 60
2 panel fixing pliers and introduction system on a mobile air curtain
panel exit system with motorized belts
Upper operating unit
Nr 1 HSK D-50 vertical electro-spindle (power 4.8 HP) with Inverter
N. 1 Circular saw group (on X axis) diam. mm 150, power HP 1.8
N. 29 Vertical drilling spindles
N. 10 Horizontal drilling spindles (8 in X + 2 a... more
|
|
15
Type: Cnc working center with edgebanding unit
Brand: Biesse
Year: 2010
Control: BIESSE WORKS
Working table type: bars, controlled by N.C.
Working dimensions X mm: 4850 / 3980
Working dimensions Y mm: 1535 / 1572
Working dimensions Z mm: 345
Vacuum cups for panel support: 32 controlled by N.C.
Vertical router: 4 axis
Automatic tools changer N positions: with 24 positions on the machine rear side, with 8 positions on the machine working head
Cones types: HSK F63
Boring head with N spi... more
|
|
6
Syrgenstein, Germany
6730 km
2010
excellent (used)
Aggregate with 4 outputs for Biesse CNCHSK F 63 good condition
Bcljs8gau more
|
|
6
Pruchnik, Poland
dealership location
7428 km
2017
new
Suction cups for the Biesse Rover CNC machines
Vacuum cups from bakelite (the same material as the service BIESSE)
Dimension: 146x132x47
83uxos8li
Thickness: 47mm
Very high quality
We can produce any quantity on request.
We are a company from Poland shipping the suction cups in packages worldwide.
Pods vacuum cups BIESSE more
|
|
4
BRAND: Biesse
MODEL: Rover 24 ATS
Bc08ivrve
DESCRIPTION:
- Work area 3000 x 1350 mm.
- Working height H 160 mm.
- Spindle 12 CV HSK F 63 with C axis.
- Revolver tool changer 10 positions on trolley X.
- 6-position revolver tool changer on trolley Z.
- Drilling machine with 14 vertical spindles 4 hor spindles X, 2 hor in Y
- 6 mobile tables to support the panels with display
- 3 suction cups on each automatic table positioning
- 4 panel lifters
- Vacuum pump 100 mc
- Control nc 500
- Machine acco... more
|
|
4
Type: Cnc working center
Brand: Biesse
Year: 2013
Control: – BIESSE WORKS ADVANCED OFFICE – BIESSE NEST
Working table type: nesting
Bjsfs0r9k
Automatic loading system: YES
Working dimensions X mm: 3765
Working dimensions Y mm: 1585
Working dimensions Z mm: 324
Vertical router: 3 axis
Automatic tools changer N positions: 12 positions
Cones types: ISO 30
Boring head with N spindles: 11
N vertical spindles in X: 7
N vertical spindles in Y: 4
Saw blade unit: YES
Automatic unloading s... more
|
|
9
Type: Double side squaring edge bander
Control: NC 410
Year: 2002
Max. working opening: 3000
Glueing system: EVA, Pre melter for EVA glue
Antisplitting unit: Automatic
Bfsswmovgq
Double hogger unit: Yes
Panel side pre heating unit with lamps: Yes
End cutting unit: YES
Rough trimming unit: YES
Fine trimming unit: Tilting
Corner rounding unit: with n 4 motors
Edge scraper unit: YES
Buffing unit: YES more
|
|
8
Type: Cnc working center
Brand: Biesse
Year: 2001
Control: NC 500
Bfsstdrxkf
Working dimensions X mm: 3400
Working dimensions Y mm: 1300
Working table type: bars
Boring head with n° spindles: 26
N° vertical spindles X: 10
N° vertical spindles Y:; 10
N horizontal spindles in X: 6
N horizontal spindles in Y: 2
Vertical router: 3 axis
Automatic tools changer N positions: 18 positions
Saw blade unit: YES
Cones types: ISO 30
Safety system with carpet: YES
Vacuum pump: Yes more
|
|
9
Type: Cnc working center
Brand: Biesse
Year: 2013
Jkljqicd
Control: B SOLID
Working table type: bars
Working dimensions X mm: 3200
Working dimensions Y mm: 1600
Vacuum cups for panel support: 24
5 axis router: Yes
Boring head with n° spindles: 26
N° vertical spindles X: 9
N° vertical spindles Y: 9
N horizontal spindles in X: 4
N horizontal spindles in Y: 4
Saw blade unit: X + Y, YES 0-90°
Automatic tools changer N positions: 10 positions, 12 positions
Cones types: HSK F63
Automa... more
|
|
7
Type: Single side edgebander
Year: 2008
Control: RELAY CONTROL SYSTEM
Pre milling unit: YES
Bfsp0teqm3
Panel height (mm): 60
PVC/ABS Thikness: 3
Infeed speed mt/min: 12
Band coil support: Yes
End cutting unit: YES
Fine trimming unit: Tilting
Corner rounding unit: with n 2 motors
Edge scraper unit: YES
Buffing unit: YES more
|
|
4
Type: Single side edgebander
Year:2012
Bfsprlqb97
Control: RELAY CONTROL SYSTEM
Panel height (mm): 60
PVC/ABS Thikness: 3
Infeed speed mt/min: 12
Band coil support: Yes
End cutting unit: YES
Fine trimming unit: Tilting
Edge scraper unit: YES
Buffing unit: YES more
|
|
5
Type: Calibrating machine, Sanding machine
Brand: Biesse
Bfn9vgk8je
Year: 2010
Control: EASYPRO 2000
Infeed speed mt/min: 20
Working width (mm): 1350
Automatic belt oscillation: Yes
No. working units: – Planner – Roll – Combined roll pad
Oscillating blowers: Yes
Depressor conveyor belt: Yes
Electric fan for depressor system: Yes
Rubbered pression rollers: Yes more
|
|
3
Type: Flexible cnc working center
Brand: Biesse
Year: 2014
Control: BIESSE WORKS
Vertical router: 1 top + 1 bottom, 3 axis
Working dimensions X mm: 3000
Working dimensions Y mm: 1300
Working dimensions Z mm: 90
N° vertical spindles X: 17
N° vertical spindles Y: 12
Bfn8t0hifu
N horizontal spindles in X: 8
N horizontal spindles in Y: 4
Saw blade unit: YES
Safety grids: YES
Safety system with carpet: YES more
|
|
12
Type: Flexible cnc working center
Brand: Biesse
Year: 2009
Control: BIESSE WORKS
Vertical router: 1 top + 1 bottom, 3 axis
Working dimensions X mm: 3000
Working dimensions Y mm: 1300
Working dimensions Z mm: 90
N° vertical spindles X: 17
N° vertical spindles Y: 12
Ewlwutjr
N horizontal spindles in X: 8
N horizontal spindles in Y: 4
Saw blade unit: YES
Safety grids: YES
Safety system with carpet: YES more
|
|
15
Type: Cnc working center
Nozcr
Brand: Biesse
Year: 2010
Control: BIESSE WORKS
Working table type: bars
Working dimensions X mm: 6505/5465
Working dimensions Y mm: 1950/1900
Working dimensions Z mm: 400/60
Boring head with n° spindles: 32
N° vertical spindles X: 12
N° vertical spindles Y: 10
N horizontal spindles in X: 6
N horizontal spindles in Y: 4
Automatic tools changer N positions: with 24 positions on the machine rear side
Cones types: HSK F63
Saw blade unit: YES
Edge bandin... more
|
|
14
Type: Single side edgebander
Year: 2012
Control: SINTRA
Bfnvpyg8xa
Panel height (mm): 60
PVC/ABS Thikness: 3
Solid wood thikness: 20
Infeed speed mt/min: 25
Pre milling unit: controlled by N.C., YES
Infeed guide: controlled by N.C, Motorized
Anti adesive unit: YES
Magazine band coil support: Yes, with n° 2 positions
Glueing system: Pre melter for PUR glue, PUR
Anti adesive unit: Yes
End cutting unit: with automatic tilting regulation
Fine trimming unit: Controlled by N.C., Tilting
... more
|
|
14
Type: Single side edgebander
Year: 2014
Control: Sintra
Panel height (mm): 65
PVC-ABS (mm): 3
Solid wood (mm): 22
Infeed speed mt/min: 24
Pre milling unit: controlled by N.C.
Infeed guide: manual
Anti adesive unit: YES
Glueing system: EVA
End cutting unit: with automatic tilting regulation
Bpoidamw
Rough trimming unit: YES
Fine trimming unit: Controlled by N.C.
Anti adesive unit: Yes
Corner rounding unit: with n 2 motors
Edge scraper unit: controlled by N.C., YES
Glue scraper un... more
|
|
15
Type: Single side edgebander
Year: 2010
Control: SINTRA
Panel height (mm): 65
PVC-ABS (mm): 3
Solid wood (mm): 3
Infeed speed mt/min: 24
Pre milling unit: YES
Infeed guide: Motorized
Y2pfql
Anti adesive unit: YES
Glueing system: EVA
End cutting unit: with automatic tilting regulation
Rough trimming unit: YES
Fine trimming unit: Controlled by N.C., Tilting
Edge scraper unit: YES
Glue scraper unit: YES
Buffing unit: YES
Hot air heating system: YES more
|
|
5
Type: Single side edgebander
Anno: 2004
Bfnuu77emg
Controllo: CNI
Panel height (mm): 60
PVC-ABS Thickness (mm): 3
Solid wood (mm): 15
Infeed speed mt/min: 20
Pre milling unit: YES
Infeed guide: manual
Glueing system: EVA
End cutting unit: YES
Fine trimming unit: Tilting
Corner rounding unit: with n 2 motors
Edge scraper unit: YES more
|
|
12
Type: Single side edgebander
Year: 2008
Control: TS 10
Ema32oo2
Panel height (mm): 60
PVC/ABS Thikness: 3
Infeed speed mt/min: 18
Band coil support: Yes
Infeed guide: controlled by N.C
Anti adesive unit: YES
Pre milling unit: YES
End cutting unit: YES
Rough trimming unit: YES
Fine trimming unit: Controlled by N.C., Tilting
Corner rounding unit: with n 2 motors
Edge scraper unit: YES
Glue scraper unit: YES
Hot air heating system: YES
Buffing unit: YES more
|
|
2
Type: Single side edgebander
Year: 2013
Control: TS 06
Panel height (mm): 60
PVC/ABS Thikness: 3
Infeed speed mt/min: 12
Band coil support: Yes
End cutting unit: YES
Fine trimming unit: Tilting
Bfnugktqwv
Corner rounding unit: with n 2 motors
Edge scraper unit: YES
Glue scraper unit: YES
Buffing unit: YES more
|
|
2
Type: Single side edgebander
Year: 2013
Control: RELAY CONTROL SYSTEM
El77pwgr
Panel height (mm): 60
PVC/ABS Thikness: 3
Infeed speed mt/min: 12
Band coil support: Yes
End cutting unit: YES
Fine trimming unit: Tilting
Edge scraper unit: YES
Buffing unit: YES more
|
|
9
Type: Single side edgebander
Year: 2007
Control: RELAY CONTROL SYSTEM
Panel height (mm): 60
PVC/ABS Thikness: 3
Infeed speed mt/min: 12
Band coil support: Yes
End cutting unit: YES
Fine trimming unit: Tilting
Edge scraper unit: YES
Buffing unit: YES
Gvxoko more
|
|
10
• Control and program system NC 1000
- Computer, keyboard and mouse
- Monitor 15”
- CD-ROM
• N° 2 working areas
• Working table with NESTING System to operate on full size panel
• N° 1 vertical router with automatic tool changer , KW 7.5
• Automatic tool changer system with n° 10 positions on the working head
• Boring head with n° 18 spindles composed as below:
- N. Verical X 7
- N. Vertical Y 5
- N. Horizontal X 4
- N. Horizontal Y 2
• Saw blade unit for grooving
• Front ... more
|
|
9
• Control system to adjust machine operations CNI
- PC / PLC with Keyboard and mouse
- Monitor
- Touch-screen system
• Working height adjsutable by numerical control
• Top pressure unit by motorized belt
• In feed guide
Bd33sylxnp
• N° 4 Lateral bars with free ilde rollers for panel support
• Anti adesive unit
• Pre milling unit
• N° 2 grooving unit before the edgebanding
• Panel side pre heating unit with lamps
• Magazine band coil support with n° 6 positions with automatic sel... more
|
|
7
• Control system to adjust machine operations
- PC
- Monitor
- Touch-screen system
• Working height adjsutable
• In feed guide controlled
• Lateral bar with free ilde rollers for panel support
D8f00qh
• Anti adesive unit
• Pre milling unit
• Band coil support
• Glueing system for EVA glue
• Pression unit with 1 + 5 pression rollers with automatic adjustment by numerical control
• End cutting unit with n° 2 motors and automatic tilting regulation
• Fine trimming unit with n° ... more
|
|
13
• Control system to adjust machine operations SINTRO
- PC / PLC with Keyboard and mouse
- Monitor
- Touch-screen system
• Working height adjsutable by numerical control
• Top pressure unit by motorized belt
• In feed guide controlled by numerical control
• Lateral bar with free ilde rollers for panel support
• Anti adesive unit
• Pre milling unit with automatic adjustment by numerical control
• Band coil support
• Glueing system for EVA glue
• Pre melter for EVA glue
• Pression u... more
|
|
11
• Control system to adjust machine operations SINTRO
Bdh7yohf8s
- PC / PLC with Keyboard and mouse
- Monitor
- Touch-screen system
• Working height adjsutable by numerical control
• Top pressure unit by motorized belt
• In feed guide controlled by numerical control
• Lateral bar with free ilde rollers for panel support
• Anti adesive unit
• Pre milling unit with automatic adjustment by numerical control
• Band coil support
• Glueing system for EVA glue
• Pre melter for EVA glue
•... more
|
|
11
• Control system to adjust machine operations SINTRO
- PC / PLC with Keyboard and mouse
- Monitor
- Touch-screen system
• Working height adjsutable by numerical control
• Top pressure unit by motorized belt
• In feed guide controlled by numerical control
• Lateral bar with free ilde rollers for panel support
Btulmzwy
• Anti adesive unit
• Pre milling unit with automatic adjustment by numerical control
• Band coil support
• Glueing system for EVA glue
• Pre melter for EVA glue
• P... more
|
|
|
