Used Biesse Rover 322 for sale (319)

Condition: excellent (used), Year of construction: 2015, For sale: 4 units of CNC ROVER BIESSE 2231. Years of manufacture: 2013, 2014, 2015, 2016. In very good condition. Folhox Tbk Rsccqkegd

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,560 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, rotational speed (max.): 20,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 6 Fgjlhccsyxm Swjqkod Horizontal drilling spindles in Y-direction: 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Spindle speed: 20,000 rpm Tool changer Number of positions: 10 Tool: head-mounted MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photographic documentation and descriptive technical/commercial documents. The buyer is entitled to inspect the item before collection and is responsible for installation, securing and use of the machine at the final destination. External reference: 8173

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Fjlhcowuz Ekjcqksgd Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Fgelhccsy H Dzfsqkjd Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 78587, functionality: fully functional, operating hours: 25,920 h, Biesse CNC-controlled machining center, type Rover C 6.50 CONF3 Working area: X-axis 4600 mm, Y-axis 1535 mm Fjlhjzkrlqsccqkogd Z-axis 275 mm 5-axis controlled Spindle speed: 1000-20000 rpm Tool changer system with 22 positions Tool holder: HSK F63 Equipped with pneumatic material clamping devices Vacuum pumps Weight: approximately 7 tons Includes software and dongle.

Condition: used, Ferwood Code: RU0000986 - Condition: Used - Compatible Machine: CNC BIESSE ROVER - If interested we offer a revision service, contact us. Felhccqsvazkfeksgd

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Felhozdqttjccqksgd Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 24 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Feloyqxxrjhccqkjgd Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Y axis working area: 1560 mm Working Table: Flat table Fgelhcou Tliyjcqkod Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008359, X axis working area: 2500 mm Y axis working area: 1320 mm Fgolhsx Swcasccqkod Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 16 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008480, X axis working area: 4600 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 5 axes Fgjlhccsy Edqkeqkod Total number of drilling spindles: 31 Total number of tool changer positions: 58

Condition: used, machine/vehicle number: 008414, X axis working area: 3140 mm Y axis working area: 1500 mm Fslheywafhsccqkegd Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 008184, X axis working area: 8200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22 Fsleyxmv Nohccqkogd

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Y axis working area: 2200 mm Working Table: Flat table Fgsley Nkrvohccqkjd Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 30

Condition: used, machine/vehicle number: 008338, X axis working area: 4500 mm Y axis working area: 1600 mm Fgjlhccqox A Tkxeked Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 41 Total number of tool changer positions: 37

Condition: used, machine/vehicle number: 008377, X axis working area: 3390 mm Y axis working area: 1570 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Fgjlhex Swb Ajccqkod Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Fgolhjw Idgvjccqkod Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100 Folex A Tfvshccqkegd

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Fslhccqeyzyrvjkjgd Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Folhccjy U Naieqksgd Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Flexible front unit protection for loading unlimited Y-size (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2006, power: 31 kW (42.15 HP), input voltage: 400 V, input current: 53 A, input frequency: 50 Hz, travel distance X-axis: 3,685 mm, travel distance Y-axis: 1,575 mm, travel distance Z-axis: 265 mm, number of axes: 3, number of slots in tool magazine: 8, overall weight: 5,700 kg, Equipment: CE marking, Biesse Rover C 6.40 Config 1 FT CNC machining centre Description ROVER C 6.40 FT - numerically controlled machining center Working fields - configuration 1 - X= 3685 mm; Y = 1575 mm; Z = 265 mm CE Safety devices FT Work Table - dimensions X = 3685 Y = 1560 mm 6 Stops with a stroke of 115 mmBack work station 6 Stops with a stroke of 115 mmFront work station Fjlhccjzgwa Ssqkogd 4 Side stops with a stroke of 115 mm (2 Lh + 2 Rh) inclusive of the pneumatic system Vacuum system for 2 300 m3/h pumps 300 m3/h vacuum pump Configuration 1 Composition C1-A1 Boring head BH 22 L SLOT 1 9 kW (12.2 HP) Electrospindle, HSK F63 adaptor, air cooling Prearrangement for the assembly of a 360° operating unit (C axis) Revolving tool changer with 8 places Composition C1-P1 Automatic lubrication system Colour LCD in replacement of the standard LCD. Software update from BiesseWorks (machine version) to BiesseWorks Advanced (machine version) BiesseWorks - Advanced programming system CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Fgolhccsx Iulwjqksd

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, Felheydf Ndoccqkjgd 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: good (used), Code: 0420 Brand: BIESSE Folhccjzgtivjqkegd Model: ROVER 13 - CE Standard CNC Working center with 3 controlled axis for furniture, custom-made furniture , panels, kitchens, wooden doors and various - CE Standard Working area X axis mm 1600 Working area Y axis mm 850 Stroke Z axis mm 70 X axis speed 75 mt/min Y axis speed 60 mt/min Z axis speed 15 mt/min Milling group Kw 2,2 18.000 rpm Vertical boring unit 8 spindles Horizontal boring bits X nr. 2 Horizontal boring bits Y nr. 2 Tool shank diameter 10 mm Spindle rotation speed 4000 rpm Blade group for milled diameter mm 120 Work table: 4 bar plans Vacuum pump 40 m3/h Total power Kw 10 Numerical control NC 400: 6-inch alphanumeric and high-resolution colour graphic display Full-coverage safety cabin Compressed air 6 atm Machine overall dimensions mm 2450 x 1550 x 1900 h Overall dimensions with guard mm 3500 x 1900 x 2000 h Weight about kg 1550

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, 3-Axis Electrospindle 5 vertical drilling heads Linear tool changer with 14 positions Software: bSolid, b Suite3 2 vacuum pumps, 250 m3/h each With chip conveyor Approximate weight: 2800 kg Approx. 4000 operating hours for the electrospindle and Fjlhccqjzkwizoksgd 1300 operating hours for the drilling unit Available September 2026