Used Horizontal machining centers with flat table or grid table (wood) for sale (342)

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Nledohwi U Topfx Aikob Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Nedpfx Ajx A E Tfsikslb Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Nlodpfxjx A Tine Aikob Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Total number of drilling spindles: 14 Total number of tool changer positions: 6

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Nodpfxeum H Ekj Aikjlb Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: excellent (used), HOLZ-HER ProMaster 7125 machining center - used Console machine, additional connections for pneumatic clamps, pneumatic workpiece stops with double-acting cylinders, pneumatic feeding aids, hardened, dust-protected prism guides, helical toothed rack and pinion drive (X-axis), ball screw spindles on Y and Z axes, network card for remote maintenance, switch cabinet cooling with heat exchanger, handheld control unit, C-axis, A-axis, rotating disc tool changer, incl. safety fence, incl. anti-fatigue mats, pendulum operation possible, ceiling laser for positioning suction cups / workpiece, central lubrication, manual, incl. material removal simulation ----- Technical data ----- Machining length (contour milling - radius) X: max 3,605 mm, Machining length (contour milling - radius) Y: 1,335 mm, max. travel speed X: 100 m/min, max. travel speed Y: 100 m/min, max. travel speed Z: 25 m/min, max. workpiece length X: 200 mm, Machine control software: CAMPUS HOPS, Main spindle motor power: 9.5 kW (S6), Main spindle speed: 1,000 - 24,000 rpm, Main spindle arbor: HSK 63, Spindle cooling: coolant, Drilling unit motor power: 3 kW, Drilling spindle arbor: M10, Morse taper 11mm, Number of vertical drilling spindles: 10 pcs, No. of horizontal double drilling spindles in X-direction: 1 pc, No. of horizontal double drilling spindles in Y-direction: 1 pc, Number of consoles: 6 pcs, Number of tools in changer: 18 pcs, Vacuum pump capacity: 140 m³/h, Extraction connection Ø: 250 mm, required volume flow: 5,300 m³/h, required static vacuum: 2,500-3,000 Pa, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min, Dimensions incl. fence (L x W x H): 6,712 x 4,585 x 2,760 mm, Weight: approx. 3,800 kg Quality information: - complete basic cleaning Nsdpfx Ajy Uxxnsikslb - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head Nodpeyrhcpsfx Aikolb 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: excellent (used), Machining Centre HOLZ-HER EVOLUTION 7405 -used- Continuous feed machining, 4-sided edge routing possible, integrated vacuum pump, automatic positioning of suction cups, hardened, dust-protected prism guides, ball screw drives on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, manual control device, XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, automatic central lubrication. ----- Technical Specifications ----- Min. workpiece length X: 200 mm, Min. workpiece width Y: 70 mm, Min. workpiece thickness: 8 mm, Max. workpiece length X: 3,200 mm, Max. workpiece width Y: 920 mm, Max. workpiece thickness: 70 mm, Machine control software: CAMOUS HOPS, Main spindle motor power: 6.5 kW, Main spindle speed: 1,000 - 18,000 rpm, Main spindle interface: HSK-F63, Drilling unit motor power: 1.7 kW, Drill spindle interface: M10, H7 fit 11 mm, Nsdpfxeyrp Sre Aikjlb Number of vertical drilling spindles: 13 pcs, Number of horizontal double drill spindles in X direction: 2 pcs, Number of horizontal double drill spindles in Y direction: 1 pc, Saw blade diameter (saw unit): 120 mm, Number of tools in changer: 6 pcs, Extraction port diameter: 2 x 120mm + 1 x 140 mm, Required air flow rate: 4,100 m³/h, Required static vacuum: 2,500 - 3,000 Pa, Required air velocity: 30 m/s, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min. Quality information: - complete basic cleaning - electrics checked - pneumatics checked - set according to manufacturer’s specifications - ready for immediate use

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, New grooving saw blade, Clamex option available, Door processing option available ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Nedey Eylwjpfx Aikslb Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked - Set according to manufacturer's specifications - Immediately ready for operation

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- This offer is an equipment package. Nedpju Tid Hefx Aikolb The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - EVOLUTION diamond formatting cutter set - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen 21.5", 16:9 - Workpiece length measurement LASER - Milling unit 7830 - 7887 tool changer 6-position magazine pick-up - ECO vacuum system - Air conditioning unit for switch cabinet cooling - Tool changer 7874 - Angular gear 7869 - Adapter for Clamex milling cutters - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Manual control unit - Tool set - EVOLUTION for XL drilling head 7885 - new exhibition machine -

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 Profit H350 1630 was manufactured in 2018. It features a robust construction with a heavy-duty welded steel frame and dual-driven moving gantry. The machine offers an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. If you are looking to get high-quality CNC machining capabilities, consider the FORMAT4 Profit H350 1630 CNC processing center we have for sale. Contact us for further details. • Working hours: 6,442 h • Condition: Not rebuilt – without warrantyGeneral • Construction: Heavy-duty welded steel frame, reinforced • Gantry: Dual-driven moving gantry • 5-axis simultaneous machining • Control software: WoodFlash CNC • Remote service package via internet connectionWorking area and axes • Working area: X 3000 mm / Y 1550 mm / Z clearance 250 mm • Drives: X helical rack & pinion; Y/Z precision ball screws • Guideways: Linear on all axes • Lubrication: Automatic central systemMain spindle (5-axis electrospindle) • Type: Cardan-joint 5-axis spindle, right-hand rotation • Power: 12 kW (S6), full power around 12,000 rpm • Speed: 1,000–24,000 rpm • Tool interface: HSK F63 • Cooling: Liquid cooling; ceramic bearings with air cooling • Integrated aggregate holder; electrically controlled extraction hood • Max tool weight: 6 kg • Max saw blade diameter: 350 mmTool magazines • Linear magazine: 12 positions, left side of frame; separate aggregate pickup; max tool Ø 250 mm; max tool length 240 mm • Rotary disc magazine: 18 positions on moving gantry; supports drills and aggregates; max tool Ø 250 mm; max tool length 280 mmDrilling unit (DH18 6H 1S) • Vertical spindles: 12 total (7 in X, 5 in Y) • Horizontal spindles: 6 total (4 in X, 2 in Y) • Drilling stroke/depth: up to 70 mm; tool holder size 10 mm; individually controlled spindles • Integrated grooving saw: Ø 120 mm; max body thickness 5 mm; up to 7,500 rpmVacuum and clamping • Console table: 6 consoles with front/rear stops; wireless dual-circuit vacuum; vacuum cup height 100 mm • Pneumatic console locking; programmable pneumatic stops; 4 movable side stops • Reinforced support arms (40 kg each) • Vacuum pump capacity: 90 m³/h @50 Hz; 108 m³/h @60 Hz • Additional vacuum connection for template work • Controlled compressed air for frame clamps • Independent vacuum/air switching per consoleCNC software and control • WoodFlash package: CNC control, tool database (Tecno Manager), program editor, 3D preview, DXF import, CAD functions (rotate/mirror/scale/copy), engraving, pocket milling, parametric and absolute/incremental programming, machining optimization • CNC control panel: Full machine operation, program creation/editing, tool/workpiece management, manual commands, vacuum/air/safety monitoring • Mobile operator terminal: 24" LED monitor, keyboard, mouse, USB • Feed speed control terminal: Manual feed override potentiometer; variable feed during machiningSafety • CE safety system; safety mats (instead of light curtain) • Emergency stop system • Safety fence on left side; door safety monitoring • Vacuum and compressed air monitoring sensors Additional equipment Nsdjy Uyihspfx Aikelb • External enable switch • Protected cable chain system • Additional A and C axis locking system • Tool service kit • Polish software installation package • Polish operating manual • Saw blade changing station on gantry

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 PROFIT H350 16.30 CNC processing center was manufactured in 2017. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. The machine is equipped with a powerful 12 kW spindle and a dual-driven gantry system, ensuring high precision and efficiency. If you are looking to get high-quality machining capabilities, consider the FORMAT4 PROFIT H350 16.30 machine we have for sale. Contact us for further details. • Working hours: 9,370 h • Construction: Heavy-duty welded steel frame; dual-driven moving gantry • Power/Electrics: 3x400 V, 50–60 Hz • CNC software: WoodFlash suite (control panel, tool database, program editor, 2D simulator, 3D preview, DXF import, CAD functions, parametric/absolute/incremental programming, pocket milling, engraving, sequence optimization, virtual planes, subprograms) • Controls and operator interface: • CNC panel for full machine control • Mobile operator terminal with 24" LED monitor, keyboard/mouse, USB • Handheld feed control (feed override, E-stop, manual feed) • Working area and travels: • Working area: X 3000 mm, Y 1550 mm • Z clearance height: 150 mm • Main spindle (5-axis): • 5-axis electrospindle with Cardan joint, liquid cooled, ceramic bearings, R/L rotation • Power 12 kW (S6), 1,000–24,000 rpm • Tool holder HSK F63 • Max tool weight 6 kg; max saw blade Ø 350 mm • Integrated aggregate holder; electrically controlled extraction hood • Axis and motion system: • Dual-driven gantry • X: helical rack & pinion, hardened linear guides • Y: ball screw, hardened linear guides • Z: ball screw, hardened linear guides • Automatic central lubrication • Tool magazines: • Linear: 12 positions, aggregate pickup; max tool Ø 250 mm, length 240 mm • Rotary (on gantry): 18 positions; max tool Ø 250 mm, length 280 mm • Saw blade pickup station: max blade Ø 350 mm • Drilling and grooving: • DH18 6H 2S drilling head: • 12 vertical spindles (7X / 5Y), 6 horizontal spindles (4X / 2Y) Njdpfx Ajy Ux Upoikjlb • Drill stroke/length max 70 mm; tool holder Ø 10 mm; individually driven • Grooving saws: 2 blades (1X / 1Y), max Ø 120 mm, body thickness max 5 mm, up to 6,000 rpm • Vacuum and clamping: • Console table with 6 consoles; front/rear programmable stops • Wireless dual-circuit vacuum system; cup height 100 mm • Pneumatic console locking; 4 movable side stops; additional support arms • Vacuum pump capacity: 90 m³/h @50 Hz, 108 m³/h @60 Hz • Additional vacuum equipment: left/right template connections; controlled compressed air for frame clamps; independent vacuum/air control per console • Safety: • CE safety system, light curtain, emergency stop system • Safety fence on left side, door safety monitoring • Vacuum and compressed air sensors • Additional safety mat system Additional equipment • Additional A-axis and C-axis mechanical locking system • Remote service package via internet • Cabinet body generator software (3D cabinet design package) • Service tool kit • Documentation: Polish manuals; WoodFlash installation manual • Additional support arms for consoles • Included accessories: • 11 vacuum cups FA 140 × 115 × 100 mm • 4 vacuum cups FA 125 × 75 × 100 mmNote: Technical data provided for information only and not binding.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 420 mm, number of axes: 5, controller manufacturer: SIEMENS, controller model: Siemens 840D sl / PCU 50 with NCU 730, spindle motor power: 26,000 W, spindle speed (max.): 24,000 rpm, This 5-axis MAKA PM 270 X CNC processing center was manufactured in 2012. It features an impressive X-axis travel of 9000 mm and Y-axis travel of 2700 mm, designed for workpiece thicknesses up to 60 mm. The machine includes a powerful milling spindle with adjustable speeds up to 24,000 rpm and a tool magazine with 32 positions for efficient tool changes. If you are looking to get high-quality milling and drilling capabilities, consider the MAKA PM 270 X machine we have for sale. Contact us for further details. • CNC control: Siemens 840D sl / PCU 50 with NCU 730; OP 15 control panel with 15" display on a guide rail along the longitudinal axis • Working area / machinable cube (with tool L/D 160 mm): • X: 9000 mm (with both gantries) • Y: 2700 mm • Z: standard cube size 420 mm • Custom-designed for workpiece thicknesses up to 60 mm • 5-axis unit • Portal 1: • Universal 5-axis milling unit • Spindle power: 20/26 kW (S1/S6) • Speed: up to 24,000 rpm, water-cooled • Tool interface: HSK F63, automatic tool change • Thread cutting possible • Chain tool magazine: 32 positions with rotary gripper; fixed on operator side • Portal 2: • 2 unit mounting consoles, each with 2 heavy-duty multi-spindle drilling units • Shared exhaust hood • 13 drilling spindles per unit (26 total), individually selectable vertically, L-shaped arrangement • 2 inclined drilling spindles adjustable 0–25° forward (1 right, 1 left), approx. 2.2 kW each, 2800 rpm • Drill chuck: Rego Fix ER 25 M • Machine table: • Base frame with linear guide • 12 table crossbeams on linear guides for X-positioning, each NC-driven and positionable • Vacuum supply integrated into the crossbeams • Each crossbeam individually vacuum-monitored and linked to machine control • Installation requirement: Foundation recess approx. 300 mm • Workplace safety: • Traveling safety cabin on both gantries • Safety bumpers and safety light curtain system on operator side and rear Nodjy Uwrgspfx Aikelb Additional equipment • Workpiece feed system: 1 belt conveyor with 4 belt strands (40 mm width each); each crossbeam with NC-controlled lifting device; stroke 110 mm mm) • Vacuum system: Bush vacuum pump type Mink MM 1322, suction capacity 250 m³/h, with 500-liter intermediate tank for rapid vacuum build-up • Chip handling: 2 chip conveyor belts under the machining area (for chips/small waste up to 100 x 100 x 100 mm) • Automatic central lubrication system

Condition: used, Year of construction: 2018, total height: 2,200 mm, total length: 4,550 mm, total width: 2,200 mm, Empty weight: 3.000 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: AH00000267 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Safety feature: Enclosed fence Nedpjxn S H Nefx Aikelb - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 2.2 - └ Connection diameter [mm]: 33 - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 130 - Transport dimensions: 4550mm x 2200mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2006, travel distance Z-axis: 200 mm, number of axes: 3, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER 20 CNC Wood Machining Centre was manufactured in 2006. It features a working area of approximately 3060 × 1260 mm and a powerful 7–9 kW HSD electrospindle with speeds up to 24,000 RPM. The machine is equipped with an 8-position rear tool changer and offers various table types for versatility. If you are looking to get high-quality wood machining capabilities, consider the BIESSE ROVER 20 machine we have for sale. Contact us for further details. • Working area: approx. 3060 × 1260 mm (10’ × 4’); Z travel around 150–200 mm • Main spindle: 7–9 kW HSD electrospindle; up to 18,000–24,000 RPM; ISO30 or HSK tool holder (depends on package) • Tool changer: typically 8-position rear; some units with 10 or 12 positions • Drilling head: BH17/BH21 style with vertical and horizontal drill spindles; grooving saw unit (optional) • Table type: pod & rail table or flat vacuum table; ATS vacuum system • Controller: NC1000 / XP600 control; running BiesseWorks / Biesse Rover control software • Electrical: 400V 3-phase; 50/60 Hz; around 15–25 kW connected load Nlodpfx Aey Tycxjikob

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,400 mm, number of axes: 4, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, This 4-axis IMA BIMA/300/125/530 CNC processing center was manufactured in 2012. It features an extensive working range with an X-direction of 5300 mm and Y-direction of 1400 mm. The machine includes a powerful main spindle with a speed range of 0-24,000 rpm and a tool holder of HSK F63. If you are looking to get high-quality CNC machining capabilities, consider the IMA BIMA/300/125/530 machine we have for sale. Contact us for further details. Working range • Y (main spindle + tool Ø20 mm): 1400 mm • Y (drilling unit, all vertical drills): 890 mm • Single-station machining: X = 2 × 2550 mm; center clearance X = 200 mm • Indexing table machining: X = 2 × 2250 mm; free space in center = 800 mmTool magazine • Automatic tool/adapter changer, turret type, 18 slots • Mounted on support, moves in X-directionGuiding and lubrication • Preloaded, surface-hardened precision roller guides on all axes • Manual central lubrication for main-axis linear guides and Z-axis ballscrewVacuum/fixturing and table • 1 vacuum pump, 90 m³/h Njdpfsy Tw Iljx Aikslb • Console table with 2 fixed right and 2 fixed left workpiece stops (X-direction) for Y movement • 10 support arms, infinitely adjustable in X, each with rear stop • All stops program-controlled • Suction plates with patented 2-circuit clamping system (hose-free) • 8 smooth support rails, automatically lowerable • 2 mushroom buttons for clamp/releaseSpindle and machining units • Main spindle: 10.0 kW (S6), 7.5 kW (S1); HSK F63 (Ø38 mm, per DIN 69893); 0–24,000 rpm, programmable • Centrally integrated CNC axis: 360° rotation for adapter units, torque support on main spindle, pneumatic interface • Drilling/grooving: Vertical drilling unit l14 with 6 horizontal spindles; horizontal units each with 2 outlets • Attached groove saw unit, swivel 0°/90°Control and software • ICOS CNC control: PC-based, Windows UI, path control of all servo axes, job list/order processing, IMA backup & recovery on two hard drives, UPS • IMAWOP software: Dialog programming, 3D view and basic simulation of workpiece, suction cups, brackets, tools, and adapters Additional equipment • Additional 2nd vacuum pump, 90 m³/h • Additional center stop row for centering workpieces • Chip conveyor belt

Condition: ready for operation (used), Year of construction: 2013, number of axes: 3, total width: 1,630 mm, product length (max.): 5,875 mm, This 3-axis CMS NC PF 100 TCU was manufactured in 2013. It features a maximum tool length of 210 mm and a maximum tool diameter of 35 mm. The machine includes an automatic tool changer and a feeding conveyor with rollers, enhancing its operational efficiency. If you are looking to get high-quality CNC wood machining capabilities, consider the CMS NC PF 100 TCU machine we have for sale. Contact us for further details. • Material capacity: • Min: width 30 mm, length 150 mm, thickness 5 mm • Max: width 150 mm, length 2000 mm, thickness 15 mm • Tooling: • 8-position rack with pneumatic movement • Automatic tool changer • Max tool length: 210 mm • Max tool diameter: 35 mm • Power and utilities: • Power supply: 400V ±10/-15%, 50/60 Hz • Operating pressure: 6 bar • Software and monitoring: • CMS Manager software • Real-time spindle monitoring • Remote diagnostics capability • System dimensions: • Length: 5875 mm • Including infeed conveyor: 1985 mm • Including out conveyor: 2160 mm • Width: 1630 mm • Special modifications: • Mechanical: • Working height adjusted to 960 mm (from 965 mm) • 50 mm isolation plate + 10 mm sheet for EHRT alignment • Double-channel emergency stop system (enhanced safety) • Automation & integration: • Specialized I/O signal interface for EHRT communication • Ethernet connectivity (TCP/IP) • File-based protocol: for part code tracking • Bidirectional signal exchange (Ready Part Load, Part Loading, Emergency) Additional equipment • Feeding conveyor with rollers • Slow down photocell for approach detection • Unloading conveyor for finished parts • Waste collection tanks under working area • Display (15" TFT color monitor) Njdpfsy S Sygox Aikelb • Safety enclosure against moving parts • External air-oil mist spray device (replaces original 6 l unit)

Condition: ready for operation (used), Year of construction: 2000, CNC Wood Machining Centre manufactured in 2000. This SCM Windor 60 features multiple vertical profiling spindles and an integrated drilling unit, designed for complex wood profiling and drilling operations. It includes a dedicated window profile machining setup and a multi-station tooling arrangement. If you are looking to get high-quality wood machining capabilities, consider the SCM Windor 60 machine we have for sale. Contact us for further details. • Technical Configuration: • Angular window machining centre • Multiple vertical profiling spindles • Integrated drilling unit Nsdsy S A Stopfx Aikjlb • Multi-tool profiling configuration • Freud tooling system installed • Left and right vertical spindle groups • Dedicated window profile machining setup • Complex wood profiling and drilling operations • Multi-station tooling arrangement

Condition: used, Year of construction: 2017, operating hours: 1,717 h, total height: 2,700 mm, total length: 40,000 mm, total width: 2,400 mm, Colour: Grey Price: On request The blade unit has a flange connection so fixed blade ( max 1000mm diam ) with 55kw at 4000rpm 5axis unit 12kw is a milling group with toolchanger C1: 540° B1: 250° C2: 540° B2: 90° Installed dimensions: 19300x7100xH4400mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 904B0018 - Operating hours: 1717 - Number of milling spindles [pcs.]: - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 2 - - Main motor power [kW]: 55 Nlsdpfjwf Hw Hox Aiksb - Saw unit present: Yes - Table length [mm]: 14400 - Table width [mm]: 3500 - X-axis maximum stroke [mm]: 5000 - Y-axis maximum stroke [mm]: 15870 - Z-axis maximum stroke [mm]: 1000 - Voltage [V]: 400 - Current consumption [A]: 130 - Power [kW]: 65.0 - Transport dimensions: 40000mm x 2400mm x 2700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2019, 2019 Holz-Her 7017K CNC Machining Center Nedpfx Asy Symneikslb Serial Number: 207/1-903; Series: BAZ19V2; Machining Dimensions (Edge Routing): in X=3.540 mm / in Y = 1.287 mm (minus cutter radius): Cutter unit: 6.5 kW ceramic bearings, 1.000 - 18.000 RPM; Vector speed: 100 m/min; Protection equipment: Light grid (1-field machining); Workpiece support: 6 consoles, incl. 8 stops, Laser pointer; Drilling head: 14 Spindle (10V | 4 H), Incl, sawing unit for grooving in X-direction; Workpiece clamping: 100 m3/h vacuum pump, low maintenance dry-running pump; Tool changer: 12-compartment Pick-up tool changer with tool cover; Software: CAMPUS software package, incl. aCADemy, CAD/CAM module.

Condition: ready for operation (used), Year of construction: 2003, number of axes: 3, This 3-axis SCM PRATIX 48 NST was manufactured in 2003. It features a working area of approximately 1220 x 2440 mm and is equipped with a vacuum nesting table. The machine includes an HSK electrospindle with a power range of 7.5–9 kW and a tool changer, either linear or side-mounted. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM PRATIX 48 NST machine we have for sale. Contact us for further details. • Working area: approx. 4' × 8' (1220 × 2440 mm) • Table: Vacuum nesting table • Spindle: HSK electrospindle, 7.5–9 kW • Tool changer: Linear or side-mounted ATC • Drilling block: Vertical drills (standard) Njdoy R Rp Dspfx Aikjlb • Controller: SCM Xilog

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Njdow Nadyjpfx Aikelb Tool length sensor for determining the length and updating the active zero offset. Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Number of milling spindles: 1 Type of milling table: Beam table Tool changer positions: 24 Nsdpfx Aiey Nybtekolb MACHINE DETAILS Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Transport packages: 1 EQUIPMENT Drilling tool Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 89867, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,875 mm, travel distance Z-axis: 324 mm, number of slots in tool magazine: 12, overall weight: 4,000 kg, TECHNICAL DETAILS Working area X-axis: 3,765 mm Working area Y-axis: 1,875 mm Working area Z-axis: 324 mm Table length: 3,600 mm Table width: 1,800 mm Tool holding system: HSK-F63 Tool changer positions: 12 positions MACHINE DETAILS Number of milling spindles: 1 piece Weight: 4,000 kg Transport packages: 1 piece EQUIPMENT Flat table BiesseWorks system/software Nlodjy Nxybjpfx Aikjb Safety mat Drilling tool included Saw unit included Labelling machine Loading system Unloading system

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 24 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes Nlodjytcl Ispfx Aikjb - Tools included: Yes - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Nedpfx Aisyzyrvokelb Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Total number of tool changer positions: 22