Condition: ready for operation (used), Year of construction: 2013, total width: 1,750 mm, total height: 2,650 mm, overall weight: 1,200 kg, product length (max.): 6,700 mm, Panel saw manufactured in 2013. This STRIEBIG CONTROL 09 6224 features a cutting area of 5300 × 2240 mm and a maximum cutting depth of 80 mm. It includes advanced functionalities such as four-sided trimming, automatic top and bottom trimming, and a digital measuring system. Consider the opportunity to buy this STRIEBIG CONTROL 09 6224 panel saw. Contact us for further details. Hnslhcdweykrd Us Doh • Cutting area (L × H): 5300 × 2240 mm • Max. cutting depth: 80 mm • Motor power: 5.5 kW • Features/Options: • Four-sided trimming (4SB) • Automatic top trimming (ABO) • Automatic bottom trimming • Scoring saw unit (VSA) • Digital measuring system (DMS) on both axes • Automatic saw beam locking with interface detection • Laser-assisted display of the horizontal cut • Automatic locking and swiveling of the saw unit • Automatic infeed and outfeed movement of the saw unit • Automatic fine adjustment of the saw motor • Full-surface birch plywood support wall with integrated small parts support • Selectable cutting cycle • 7.5" color touchscreen for visualization and operation • Condition: Good working condition (machine was only used for testing purposes)

Condition: ready for operation (used), Year of construction: 2008, overall weight: 2,300 kg, cutting speed: 3,400,000 mm/min, This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details. • Cutting capacity round: 115 mm • Cutting capacity rectangular: 200 × 70 mm • Cutting capacity square: 105 × 105 mm • Saw blade diameter: 350 mm • Saw drive power: 6.5 / 8.0 kW • Control system: BEHRINGER PLC control • Lubrication: Micro spray system • Controlled zero stop (gesteuerte Nullkante) • Cutting gap extension (Schnittspalterweiterung) • Machine light • Vertical main clamping • Backstop lock (Rücklaufsperre) • Extraction system prepared Additional equipment • Infeed roller conveyor: approx. 5000 mm (custom built) Hjlhcdeykravjw Denh

Condition: ready for operation (used), Year of construction: 2004, total width: 1,450 mm, total height: 1,900 mm, overall weight: 1,500 kg, product length (max.): 2,700 mm, Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details. • Total installation length (foundation plan): 3226 mm • Saw blade diameter: 450 mm • Saw blade type: HM / HSS (DIN 8576) • Blade bore: 50 mm • Number of fixing screws: 4 • Bolt circle: 80 mm • Fixing screw diameter: M12 • Cutting capacity (round): 150 mm • Cutting capacity (rectangular): 140 × 160 mm • Cutting capacity (square): 140 × 140 mm • Saw blade feed speed: 0–3500 mm/min • Rapid return: 4500 mm/min • Cutting speed (at 400 mm blade): 1950 / 3900 m/min • Feed speed (material feed): 10 m/min (optional: 10 / 20 m/min) • Adjustable cut lengths: 10–1000 / 2000 mm • Miter adjustment: Stepless ±90° (manual) • Drive power: 3.7 / 4.7 kW (optional: 4.7 / 6.3 kW) • Compressed air connection: 6–8 bar • Control system: Kaltenbach PLC Holhcdoykqrwsw Denh • Lubrication: Micro spray system Additional equipment • Loading magazine: T3 / L 45 E • Loading length: 6 m

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg Hnslegylq Ijhcdw Deh

Condition: used, Year of construction: 2016, Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 1600 Hnjlhcjx R A Ufjdw Djh - Max. cutting width [mm]: 4300 - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical Specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow flat-top tooth Blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting fence from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction connection: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping grippers, motorized on vertical axes via a ball screw, moving from top to bottom. The grippers handle panels weighing up to 150 kg. - Torsion-free, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slat bed - Fine-adjustable flip stop with extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting fence - Manual programming rail with 5 T-slot nuts - Pneumatic immersion of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 intermediate support elements, pneumatically extendable - Pneumatic saw head locking - Control panel with documentation holder - Switch unit on the saw unit: start button, stop button - Tool cabinet - Scale illumination for vertical cuts Partnership Edition Features: Hnolhcdjw I U D Eow Doh - Digital display for the flip stop - Digital display for the saw unit with incremental mode - Pneumatically tiltable saw unit - Scoring system with controlled counter-air nozzle, numerical display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Holjxnlgcshcdw Denh

Condition: ready for operation (used), Only 2700 hours with protective device Hnslhcdwjykmy Dj Dsh

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm Helhcdeykvw Sow Dsnh - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Hjlhcdwsw Dfnho Djnh Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Hnjlsx Twcvshcdw Djh

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Currently still in production > Robust German engineering > Suitable for edging, cross-cutting, sizing, miter cutting, etc. > Dimensionally stable and self-supporting machine body constructed as a sturdy frame-welded design from thick-walled steel profiles, laser-machined steel sheet parts, and mechanically finished > Built on the machine body is a torsion-resistant, finely planed cast-iron table top > The robust and powerful saw unit, integrated in the machine stand, guarantees precise saw cuts > The complete saw spindle assembly is dynamically balanced, with double-guided swivel segments made of cast iron and dual column guidance for height adjustment, as well as the long, double ball bearing-mounted circular saw spindle for absolute smooth running > The double roller carriage runs smoothly and is maintenance-free. Precise and play-free movement over the full length, guided by hardened and ground prism guides with remote locking in 80 mm steps > Stable yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side > Cross slide stop with mm scale and telescopic extension, extendable to 3500 mm. Equipped with 2 robust, play-free, movable stop flaps and 1 end stop with support for long strips. The length stop can be used as an angle/miter stop continuously adjustable on both sides from 0° to 50° with mechanical length compensation. All common miter angles (15°, 22.5°, 30°, 45°) can be quickly set using a locking system. > Rip fence with a cutting width of 1030 mm to the right of the saw blade with fine adjustment, easily adjustable and fixable manually, dimension displayed via an easily readable mm scale on the adjustable rule carrier. > Table extension 1200 x 600 mm and table length extension 750 x 655 mm > Operation at the machine body > Electromotoric height and tilt adjustment via tip buttons > Saw blade tilt range from 0 – 47° > Digital displays for angle adjustment, cutting height, and speed > APA quick-release saw blade system > Main saw blade speed 3000/4000/5000/6000 rpm > Guard can be swung away to both sides, protective hood with interchangeable insert (wide/narrow) for saw blades up to Ø 450 mm > Push button control with electronic soft start (Start/Stop) > Electronic wear-free motor brake Technical Description > Cross slide stop extendable up to 3500 mm > Saw blade Ø 400 mm can be sunk below the table > Extraction port 120 mm on the machine body, 80 mm on the guard > Roller carriage, length and width stop profiles anodized > Machine body and swing arm powder-coated in anthracite RAL 7021, cover sheets available in 5 standard RAL colors > Cross slide galvanically zinc-plated > CE compliant, GS-certified, BG wood dust certified Cutting length 3450 mm, roller carriage length 3200 mm Max. cutting height 155 mm at 90°, 105 mm at 47° Cutting width, rip fence 1030 mm Max. saw blade Ø 450 mm Hnolhcoyig Ezedw Doh Table size cast-iron top 1200 x 655 mm Plus table extension 750 x 655 mm Table width extension 1200 x 655 mm Table height 900 mm Motor power 5.5 kW (7.5 HP) Voltage 400 V / 50 Hz Space req...

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, height adjustment type: mechanical, total length: 17,000 mm, total width: 2,500 mm, total height: 1,000 mm, saw drive: 31,000 W, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Hnolhcewa T Dcjdw Djh Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Please contact us if you are interested or have any questions.

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit - Spindle diameter: 30 mm - Spindle locking - With sliding table - Cutting length on sliding table: 2800 mm - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm Hnjlhcoyi Tpvsdw Deh - Table dimensions with extension: 1230 mm - Table dimensions with extension: 2070 mm - Saw blade guard - Dimensions (L/W/H): 2940 x 3400 x 1420 mm - Weight: 1100 kg ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate changes, the price may change)

Condition: good (used), cutting width 300 mm Cutting height 85 mm Motor output 1,5 kW Holhcdwjyiu Sfo Dsnh saw-blade dia. 300 mm connected load frequency 380 V

Condition: new, cutting width max 610 mm Helhcdeyi Hthjw Djnh Cutting height max 200 mm Saw blade diameter 650 mm Motor output 11 kW

Condition: used, Automatic Horizontal Bandsaw Year: 2011 Serial Number: 11042134 Model: LX – 460AE Blade Size: 4770MM x 41 MM x 1.3MM Hydraulic Hnelhcdwsydv Rro Doh Cutting Capacity: 460MM x 430MM

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Saw blade speed: 2800 rpm Hnelhcdjyh Hn Hew Dsh Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg

Condition: ready for operation (used), Year of construction: 2019, Circular Metal Saw manufactured in 2019. This Other Struers Magnutom 5000 features a cutting capacity for round material up to Ø 151 mm and rectangular material of 151 × 403 mm. It has a continuous power of 11 kW and a maximum positioning speed of 70 mm/s. Consider the opportunity to buy this Other Struers Magnutom 5000 Circular Metal Saw. Contact us for further details. • Cutting capacity (Max) – Magnutom 400: • Round material: Ø 151 mm • Rectangular material: 151 × 403 mm • Flat material: 92 × 550 mm • Cutting motor: • Continuous power (S1): 11 kW • Intermittent power (S3): 16 kW • Cut-off wheels – Magnutom 400: • Wheel size (Diameter × Thickness × Bore): 432 × 3.0 × 32 mm • Rotational speed (rated load): 1000–1950 rpm • Cut-off wheels – Magnutom 500: • Wheel size (Diameter × Thickness × Bore): 508 × 3.5 × 32 mm Helhcdweyh Hpkj Dsnh • Rotational speed (rated load): 1000–1850 rpm • Positioning and feed: • Cut-off wheel positioning range: • Y-axis: 385 mm • Z-axis: 235 mm • Maximum sample height under cut-off wheel: No limitation • Maximum positioning speed: • Y-axis: 70 mm/s • Z-axis: 50 mm/s • Feed speed range: 0.1–10 mm/s • Cutting force: 0–1400 N • Cutting table (fixed, Magnutom 400/500): 827 × 781 mm • Cutting chamber: • Width: 1000 mm • Depth: 1206 mm • Height: 918 mm Additional equipment • Optional X-table: • Maximum size: 942 × 781 mm • Minimum size: 673 × 781 mm • X-axis travel: 269 mm • T-slots: 12 mm, bi-directional

Condition: used, band length ca. 1.700 mm + 2.700 mm cutting width max. 2.500 mm Hnslhcdwsv Hgb Ne Deh Cutting height max. ca. 80 mm

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers Holhcox S Nadjdw Dsnh - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NO. 7532 TECHNICAL DATA - Track width: 340mm - Shaft width: 400mm - Shaft diameter: 65mm - Max. saw blade diameter: 400mm - Saw blade bore diameter: 80mm - Max. cutting height (with 400mm blade): 140mm - Table width with clearance: 870mm - Table length: 2140mm Hnelhcdox S I Utjw Djh From the top: - Pawls - 1 pressure idler roller - Pawls - Sliding pressure roller - Saw shaft - Sliding pressure roller - Sliding pressure shaft From the bottom: - Guide rail - Idler roller - Pawls - Track - Electric body lifting: 0.55kW - Electric saw shaft lifting: approx. 0.55kW - Central lubrication - Stepless feed speed adjustment via frequency inverter (1.5kW): 8-48m/min - Main motor: 55kW - Extraction nozzle diameter: 300mm - Overall dimensions (L/W/H): 2540x1480x2570mm - Weight approx.: 3500kg ADVANTAGES – Manufactured in Germany – Fitted with 5 pcs 350mm diameter saw blades – Electric height adjustment – Operator control panel – Stepless feed speed adjustment – Used multi-rip saw, in very good condition Net price: 145,900 PLN Net price: 34,730 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7893 Technical Data: - Track width: 350 mm - Shaft width: 350 mm - Maximum blade diameter: 350 mm - Blade bore diameter: 70 mm - Cutting height: 120 mm - Table width with clearance: 690 mm - Table length: 1980 mm – From the top: - Pawls/kickers - Slip and pressure shaft - Pawls/kickers - Slip and pressure shaft - Pawls/kickers - Slip and pressure shaft - Clamp - Saw shaft - 2 smooth pressure rollers - Pawls/kickers Helhcdeyit Ryjw Djnh - Guide bar - Electric adjustment of body height - Manual adjustment of saw shaft lifting - Stepless feed speed adjustment - Central lubrication - Feed drive motor: 2.2 kW - Main motor: 30 kW - Height to table surface: 780 mm - Extraction connection diameter: 120 mm, 180 mm - Overall dimensions (LxWxH): 2050 x 1500 x 1900 mm - Weight: approx. 2000 kg ADVANTAGES – Made in Italy – Not repainted – Complete with insert for short pieces – Used multi-blade saw, in very good condition Net price: 42,900 PLN Net price: 10,200 EUR (exchange rate 4.2 EUR) (Prices may fluctuate with significant exchange rate changes)

Condition: excellent (used), Catalogue number: 7891 TECHNICAL DATA - Maximum blade diameter: 300mm - Spindle diameter: 30mm - Blade guards: 2 pcs - Pneumatic cutting (blade up/down movement) - Saw units adjustable at a 45° angle - Manual adjustment of the distance between saw units - Minimum cutting length at 90°: 740mm - Maximum cutting length at 90°: 3400mm - Cutting width: 140mm - Cutting height at 90 degrees: 100mm - Pneumatic clamps: 2 pcs - Foot pedal control - Material support - 2 spindle rotation speeds - Main motor: 2×1.65kW - Dimensions (L/W/H): 3650x1050x1260mm - weight approx. 500kg ADVANTAGES – Not repainted – Tilting saw units – Used saw, in very good condition Net price: 10,900 PLN Net price: 2,600 EUR (based on an exchange rate of 4.2 EUR) Hnolhcdoyit Nvow Djh (Prices may fluctuate with major rate changes)

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls Hnolhcdwjyit Dao Dsh - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)