Used Complet Sawmill for sale (10,538)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Iisdpfxjrmmqzs Abgja

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge Iisdjyzr Tfopfx Abgja - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 13,000 kg, total length: 15,000 mm, saw band length: 9,045 mm, saw band width: 160 mm, wheel diameter: 1,250 mm, Horizontal Band Saw WRAVOR WRC 1250 AC High-performance industrial saw with 55 kW motor — for cutting logs up to Ø 1250 mm Year of manufacture: 2018 Technical Specifications: • Main motor: 55 kW • Control: fixed control panel with Unitronics V-280 PLC • Manual adjustment of cutting thickness possible • Track length: 12.5 m • Log clamps: 5× hydraulic • Hydraulic rollers: 5× • Squaring arms (90°): 5× • Standard log turner: 4× Ijdjxwkt Tjpfx Abgsia • Mechanical stops: 3× • Scoring saw: 1× • Outfeed conveyor belt for board transport Images are for illustrative purposes only. Ffsda Njxwkt Tj Nm Rwjw

Condition: new, Year of construction: 2025, High-performance industrial bandsaw Wravor WRC 1250 AC – robust, precise, and suitable for cutting large logs. Equipped with automatic control and advanced features for maximum efficiency! 📌 Key features: ✔ strong and stable construction Iedpfoyz Taaex Abgoia ✔ high precision ✔ high cutting capacity ✔ automatic control ✔ reliable and robust construction ✔ main wheels made from cast steel, dobule bearing (STABLE CONSTRUCTION!), wheel diameter: 1250 mm, width 135mm ✔ length of saw blade: 160/180 DOUBLE-SIDED) L = 9045 mm ✔ motor power: 55kW -110kW, frequency converter optional Saw width: Approx. 4500mm (depending on equipment) Rail width: Approx. 2300mm (depending on equipment) Saw weight: Approx. 23,500 kg (depending on equipment, on length of chassis) Max cutting width (between guides): 1300 mm

Condition: excellent (used), Year of construction: 2010, High-Quality Sawmill Machinery – Immediately Available We offer you an exclusive selection of well-maintained sawmill equipment in excellent condition, available in this configuration only through us. All machines have been technically inspected, are ready for operation, and can be delivered at short notice. Available System: Linck VM50 Saw Line – comprising: * Infeed Unit ZV21, Model EV 50 * Profiling Chipper ZD31, Model VM50, 2 × 200 kW * Outfeed Unit AV31, Model VZM * Centering Device VZ21, Model VZV Iiodpfx Aoy Dp Avobgea * Log Rotator DV21, Model DV70-2 Additional Components (optionally available): * Infeed and Centering Unit EVP (from September 2026) * Profiling Chipper VM50, 2 × 200 kW (from September 2026) * Profiling Unit VMP450 F61, 4 × 110 kW (from September 2026) Your Benefits: * Excellent, well-maintained condition * Immediately ready for operation * High-performance machinery for industrial applications * Exclusive availability We also have further Linck machines in stock. Inquiries welcome: Please contact us for further details, pricing, and viewing appointments.

Condition: used, Year of construction: 2007, 4 profiling units VPF340 2x90 kW New subframe LINCK centering system VZM LINCK extraction unit CSA Iisdpjy Adl Njfx Abgea

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, three-way table, 6 cross conveyors, log infeed, and much more. The sawmill line is fully operational. Customer service has been newly performed. The line is still in operation and can be inspected at any time. The price also includes approximately 100 saw bands for LT70/HR700 and 11 saw blades for EG800. Ijdpfxjyz Ia Is Abgjia Currently, the HR700 is not in use and is in storage. The HR700 is fully operational with only 30 operating hours. An alternative setup of the line with HR700 can be seen in the last picture. If you have any questions, I am happy to assist.

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Iisdowavqlepfx Abgja Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: good (used), banana feed conveyor Iedpfx Aboyzup Aegoia

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cutting length (max.): 5,000 mm, cutting height (max.): 50 mm, cutting width (max.): 300 mm, We offer this very good Brodbaek BCO Edger Infeed Conveyors for sawmill (stationary), year of construction 2012. Manufacturer: Brodbaek Model: BCO Edger Year of manufacture: 2012 Dimensions before Edging: Width minimum: 75mm Width maximum: 300mm Thickness: 15mm – 50mm Length: 2.1m – 5.0m Dimensions After Edging: Width minimum: 75mm Width maximum: 200mm Thickness: 15mm – 50mm Iijdpfx Abjyw Sx Hjgea Length: 2.1m – 5.0m Waterfall conveyor • Including sub frame for the waterfall conveyor • Height adjustable legs to ensure ease of installation • Designed to singulate the boards • Reject board facility • Dogs designed to pick up 16mm - 38mm thick boards, • Waterfall works automatically with sensors • High Quality Conveyor Chain • Rotating arm to knock off 2nd board as it travels up waterfall • Board singulation controlled automatically by 2 sets of arresting fingers • Accelerate the board • High Quality Conveyor Chain • 12 Sensors from above to measure wane on the boards, • Rollers to ensure the board is fair ended Infeed Kick in chain - all pieces centralised to the infeed chain

Condition: excellent (used), Year of construction: 2020, Complete sawmill for pallet lumber consisting of: 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory log input measurement system by Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter from 20 - 90 cm. 2. Sawmill: Möhringer band saw, running bandsaw with Flexi Drive carriage. Slab scanning unit. Round timber intake with step-by-step singulation. Laser measurement by Bidac. Kallfass cross-cut unit. Resaw: EWD Optimes with chipper canter and double arbor saw NKU. Brodbaek edger system. Stacking system for main products, empty pallet handling for both main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electric and electronic control cabinets, etc. Waste disposal. Detailed plans or video can be provided upon request. Iodpfxox T Azwo Abgjia

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Automatic Edging Line for Lumber Complete automatic edging line for lumber, manufactured by EWD Esterer (Germany), a brand renowned for reliability and precision in the woodworking sector. Isdpfxoyz Sare Abgeia Model: DK 90 T2L2 Year: 1997 - CE marked The line consists of an integrated system that enables a continuous and automated flow of material, from the infeed stage to final outfeed. The process starts with a horizontal conveyor belt, followed by a board singulation system ensuring correct material alignment. There is a trimming deck and an automatic feeder that directly loads the EWD/Esterer edger model DK 90 T2L2. At the outfeed, the material is handled via a trimmings separation system and conveyed onto a roller conveyor of approximately 15 meters, equipped with two lateral kickers (right and left). These allow for automatic selection between short material (up to 250 cm) and long material (up to 300 cm). Condition of the machine: Fully operational system, available immediately and currently visible in production. Viewing and testing possible by appointment.

Condition: used, Year of construction: 1986, functionality: fully functional, We are offering this used Brenta Vertical Band Saw with automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type Progress 750 Machine no.: 409621 S268 N1143886 Maximum cutting length: 12 meters In the various photos, you can see: - overall view of the saw - saw machine nameplate - saw with extraction pit - automatic line behind the saw - pit under the lower wheel - infeed line from outside - infeed line as seen from inside - outfeed line inside - extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain - collection bin behind the outfeed line - collection bin seen from the other side. With red button operable both here and from the machine room - overview of the outfeed line - machine plate of the saw carriage - saw carriage in the outer position, where the log can be loaded - control room behind the saw - control room interior. Electronic measurement setting and control of all infeed and outfeed lines - wall-mounted electronics across from saw. Control current with relays, which can also be operated manually - Atlas Copco GX 11 FF compressor Iiedpfxeyxhq Uj Abgja - Compressor nameplate, year of manufacture 2005 - Grass Air DW 31 air dryer - Stellite adjustment blocks for the guides where the saw blades run through Technical information: - The machine must be supplied with air, hydraulics, and electricity (including control current) - The wheels (upper and lower) were ground approximately three years ago and can last for many more years. - Infeed conveyor control cabinet was renewed in 2025 - At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment. This Brenta vertical band saw with automatic turning carriage is an excellent combination. The listed price is based on the EXW Incoterm, with dismantling by the buyer. If you have any questions or require further information, please feel free to contact us or give us a call.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, FOR SALE – COMPLETE INDUSTRIAL SAWMILL LINE (EWD / SPRINGER / MICROTEC) High-performance, fully integrated sawmill plant featuring an EWD saw line for efficient industrial log processing. The system combines proven technology with continuous upgrades and is in excellent working condition. Iiedpfx Aeyza D Eebgea Cutting capacity: approx. 120,000 m³ roundwood per year The plant has been regularly serviced, professionally maintained, and is still partially in operation. Inspection during running production is possible by arrangement at any time. Availability: approx. June 2026 Scope of supply Log yard (infeed & preparation): • Sorting, measurement, and debarking line – SPRINGER (Year 2017) • Nicholson debarking machine (Year 1992) • Microtec measurement system (Year 2015) • 30 sorting bins • Cross-cutting plant (Year 2017) Saw line – EWD: • Twin-shaft circular saw DWK 700 (Year 1999) • Profile chipping canter PF 19-3SP/V (Year 2003) • Secondary circular saw BNK 225/6 (Year 2003) • Complete mechanisation and control system • EWD Optimes BK-100B edger Lumber sorting & ancillary equipment: • 7 sorting bins with stacking system • Complete chip and waste wood removal system • Kiln drying chambers and heating system Your advantages • Complete plant – ready for immediate operation • Proven industrial technology • Regularly maintained and modernised • Highly efficient in operation • Compact and high-performance design • Ideal for industrial lumber production General information • Main components built: 1992 – 2017 • Condition: very good • Availability: from June 2026 • Inspection: possible during operation by arrangement This plant represents an economically attractive solution for companies looking for a complete, powerful, and immediately available sawmill line.

Condition: new, Year of construction: 2025, EG350EH30S-EMR Main electric motor 22 kW Maximum board width 550 mm Maximum cutting width 410 mm Minimum material thickness 16 mm Maximum material thickness 100 mm Ijdpfsyyxcqsx Abgoia Minimum board length 800 mm Minimum material width 40 mm Minimum cutting width 20 mm 5 circular saw blades – 4 fixed and 1 movable Adjustable feed speed 0-25 m/min Set of two lasers Infeed and outfeed tables Setworks automatic cutting parameters adjustment unit Two upper board return rollers Adjustable fence Chip box

Condition: new, Year of construction: 2025, EG300EH25S-EMR Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Isdpfx Aeyynq Robgoia Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 17 h, saw blade width: 38 mm, saw blade length: 4,670 mm, wheel diameter: 60,000 mm, LT70ME25SAHP3-P2R Main electric motor: 18.5 kW Max. log diameter: 95 cm Cutting length: 6.1 m Clearance between rollers: 73 cm Max. cutting width (cant): 64 cm Max. cutting height above blade: 39 cm Electric head feed up/down Electric head feed forward/backward Iiedoyym Hdopfx Abgoa PLC2 automatic thickness setting device Debarker mounted directly on the sawmill Electric blade guide adjustment Double-block blade guide Hydraulic blade tensioning LMS blade cleaning system Blade length: 4.67 m, width: 38 mm Roof-shaped bed Log handling features operated by "Standard Plus" hydraulic system including: (3x vertical log stops, 1x central clamp on two rods, 1x comb-type log turner, 2x log leveling rollers including one powered supported by two hydraulic cylinders, log loading) Blade wheel diameter: 600 mm

Condition: new, Year of construction: 2025, saw blade width: 35 mm, saw blade length: 4,010 mm, wheel diameter: 4,830 mm, LT40ME20SAH3-SWR 15kW electric motor Log diameter: 90cm Clearance between rollers: 72cm Maximum cutting width (cant): 63cm Maximum cutting height above blade: 35cm Cutting length: 6.1m Blade length: 4.01m, width 32-35mm Electric head feed up/down Electric head feed forward/backward Electric blade guide adjustment Blade cleaning system with solenoid valve SW10 automatic cutting thickness setting device Iedsyymrgepfx Abgsia Debarker mounted directly on the sawmill Roof-type bed Log handling functions on the machine performed by the “Standard” hydraulic system include: (3 side supports, central clamp on two bars, comb rotation device, 2 log leveling rollers, log loading) Blade guide wheels: 483mm

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost. Iodeyr Dbuepfx Abgoia

Condition: used, Year of construction: 1993, functionality: fully functional, We are selling our packaging timber sawmill: - Esterer frame saw H30 - EWD step feeder - with stacking system - Costa Multiprisma (35), logs up to 6 meters - Costa double-shaft saw type Leopard - Zeno drum chipper - with numerous auxiliary machines The machines can be inspected on site by appointment if interested. Iiodpowbpi Djfx Abgea

Condition: new, Year of construction: 2025, cutting length (max.): 5,400 mm, saw blade width: 35 mm, saw blade length: 4,010 mm, wheel diameter: 4,830 mm, LT15SCS3EH10SP-ESWPD Electric motor 7.5 kW Maximum cutting diameter: 70 cm Cutting length: 5.4 m Clearance between rollers: 64 cm Maximum cutting width (cant): 59 cm Isdpeyyaxyefx Abgsia Maximum cutting height above blade: 27 cm 3 clamps, 6 lateral supports Automatic thickness setting device (Setwork – SW10) Debarker Electric head feed forward/backward Electric head feed up/down (screw) Manual saw blade guide arm Blade cleaning system – electric solenoid valve Blade tensioning system – screw with pressure gauge Blade guide wheel diameter: 483 mm Double-support mast construction Electrical requirements: 400 V, 16 A (7.5 kW) 24-month warranty.

Condition: ready for operation (used), Year of construction: 2003, Technical Details : Manufacturer - DINACO Model - FIL 1300 H / VEL 970 H Wheel diameter - 1300 mm Wheel width - 165 mm Hydraulic guide Hydraulic scale Wheel tilt - motor Main electric motor P=55 Kw Input transporter 3x Output transporter Return ramp Automatic stacking Additional devices: Hydropneumatic perdrezač Chain wallpaper Hydraulic vertical cutter Iijdpfx Aeyuu Abebgja

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Iijdsyub Ahepfx Abgea

Condition: new, Year of construction: 2022, functionality: fully functional, We offer this stationary WOOD MIZER EG300, in new condition, year of manufacture 2022. Iiodpfxeyngfbj Abgja Manufacturer: WOOD MIZER Model: EG300 Year of manufacture: 2022 Condition: new Type: stationary If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Iiedpsxvpd Ijfx Abgea