Used Complet Sawmill for sale (13,883)

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, Log infeed Reducer Debarking Block conveyor EWD ZE infeed table Microtec 3D measurement Spaner FZ3 Roller unit EWD EVW Flexible double-shaft circular saw EWD DWK 700 T-6 6 flexible saw axes Cutting height 60-340 mm 2x200 kW Dedpfx Aijz Tfa So Eowd Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology Dodpfextwwkjx Ai Ejwd 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: good (used), the machine is in good condition, includes electrical cabinets, sharpening machine Dodpfx Aisvdyr Ne Eswd

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor Dwsdpjy Uzhfsfx Ai Esd - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: like new (used), Year of construction: 2001, operating hours: 7,200 h, functionality: fully functional, overall weight: 20,000 kg, cutting height (max.): 800 mm, cutting width (max.): 1,000 mm, total height: 3,000 mm, total length: 10,000 mm, transport width: 2,500 mm, Equipment: cabin, documentation/manual, Complete sawmill plant in excellent condition. The plant does not require any overhaul as it has been used sparingly. The plant consists of: * Artiglio 1300 log saw * Modesto edger with one fixed blade and one movable blade * Ferrari chipper * Complete conveying system, log reloader, vertical saw Dwodpfx Aioz N Sxgs Ejd

Condition: used, functionality: fully functional, The primary breakdown section of the saw line is available for sale. The package includes a Heinola (Ahlström) chipper canter and a quad band saw (BM1500), together with centering, infeed, and outfeed conveyors. The equipment is offered as a complete, fully operational solution. Dwedpeyka Nrsfx Ai Eod

Condition: good (used), Equipment: scorer, Wimmer Zenz band saw Dwjdpfx Ajztcrmsi Eed

Condition: excellent (used), Year of construction: 2010, year of last overhaul: 2026, Equipment: documentation/manual, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Dedpfxsz H Hzvo Ai Eewd Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: used, For sale: a CTR1000H40 in excellent condition with top-of-the-line features. Reason for sale: upgrading to a CTR1000H60 due to specific new orders. Dedpfezqrrqex Ai Eowd Condition: absolutely very good condition. Location: DE-85391 Aiterbach Contact person: Roman Griesauer Inspection: The machine is in operation and can be inspected and demonstrated upon request. Includes the following equipment: CTR1000H40-ZUB: Infeed system for the cut material CTR950H-DS: Dual-arm log loader CTR950H-HSD: Lever log turner CTR950H-KSD: Chain log turner CTR950H-MR: Material slide CTR950H-SP: Clamping device CTR-18.5: Motor 18.5 kW CTR-AMP: Ammeter CTR-EGL: Electrically adjustable saw blade guide CTR-KV: Cable extension for an additional section CTR-Pumpe-EA: Irrigation pump with automatic start CTR-SSP: Saw blade tensioning device CTR-ZSP: Additional control station for hydraulics

Condition: used, Year of construction: 2016, functionality: fully functional, cutting length (max.): 6,000 mm, wheel diameter: 1,000 mm, Horizontal Band Saw WRAVOR WRC 1000 Proffesional industrial saw with 30 kW motor — for cutting logs up to diameter Ø 950 mm Year of manufacture: 2016 Dwjdszd A Ivepfx Ai Esd Technical Specifications: • Main motor: 30 kW • Fixed command board on sawhead • Control: fixed control panel with Unitronics V-130 PLC • Manual adjustment of cutting thickness possible • Track length: 9,5 m • Hydraulic log clamps: 4 X • Hydraulic lifting / mechanical rollers: 2 X • Hydraulic angles (90°): 3 X • Standard log turner: 2 X • Outfeed silon conveyor belt for board transport

Condition: new, Year of construction: 2026, 🏆🌍WRAVOR WRC 2000 – THE WORLD’S LARGEST HORIZONTAL BAND SAW 💪🏻exceptional heavy-duty horizontal band saw, designed for the sawing of large-diameter logs and demanding industrial applications. 💪🏻massive construction, outstanding rigidity and high cutting capacity 👉🏻 the highest level of heavy-duty horizontal band saw technology. Dodjztp A Eopfx Ai Eewd ⚙️ when size, strength and precision matter – WRC 2000 delivers: 🔹 Up to 2,000 mm wheel diameter 🔹 Designed for large-diameter exotic, hardwood logs 🔹 Extremely robust and rigid construction 🔹 Heavy-duty components for demanding sawmill operations 🔹 High cutting capacity and excellent stability 🔹 WRAVOR technology – reliable, durable quality 🔩WRAVOR WRC 2000 – built for the biggest logs and the toughest sawing conditions.

Condition: used, For sale: BRENTA industrial log bandsaw with Progress log carriage Heavy-duty BRENTA industrial log bandsaw (bandsaw / frame) including Progress log carriage, from a professional sawmill. Technical data - log bandsaw Manufacturer: Ateliers de Construction Louis Brenta SPRL (Belgium) Model: ETYELEC Machine serial number: 406341 Motor power: 60 HP (approx. 44 kW) Speed: 340 RPM Bandwheel diameter: Ø 1,400 mm Djdpfox Ndphsx Ai Eewd Condition Bandwheels and frame overhauled and ground approx. 1 year ago New bearings on the bandwheels Runs smoothly Progress log carriage Heavy-duty industrial design Mechanical roller conveyor with chain drive

Condition: like new (used), Demonstration machine The CTR1000H80 band saw with an 80 mm saw blade for even cleaner cuts and higher yield. Extra strong, solid, and durable sawing unit for log diameters up to 1000 mm. Soft starter included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. CE certified. Advantages and features: - Saw head suspended on both sides for greater stability and better precision. - 8.4-inch touchscreen LCD for quick and precise height adjustment. - With telescopic lever log turner and log lifter for easy log manipulation. - Log lifter with drive for horizontal log feed. - 5 swiveling hydraulic angle stops. 2 log clamping tools. - Hydraulic saw blade tension for quick adjustment. - Electrically adjustable saw blade guide and automatic coolant pump for high operator comfort. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 375 mm Cutting length of the base section: 7.5 m Length of the extension section: 3 m Dedpfx Aszqrm Iji Eswd Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Stroke motor: 0.55 kW Motor of the hydraulic unit: 5.5 kW

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Dsdpfxexg Ubyj Ai Ejwd Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: used, Year of construction: 2006, For sale: LBL Brenta log clamping carriage – year of manufacture 2005 LBL Brenta log clamping carriage This LBL Brenta log clamping carriage has been completely overhauled and is ready for immediate use. The machine comes from a professional sawmill and was regularly maintained until it was dismantled. Dwodpfex Ndpbsx Ai Eod Equipment 4 independently adjustable clamping supports Integrated log turner Integrated flippers Distance between clamping supports: 2,300 mm – 1,800 mm – 1,400 mm New drive unit Including rails and control panel Ready for immediate transport and loading This machine is ideal for the precise cutting of roundwood and impresses with its robust construction and the proven LBL-Brenta technology. Please refer to the attached PDF documents for the technical data, dimensions, and drawings. Inspection is possible at any time by appointment. We are available for further information, photos, or videos.

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Dedpfsy Iuuxjx Ai Eswd

Condition: excellent (used), machine/vehicle number: 406341 S222 N7804, BRENTA ETYELEC Industrial Band Saw Robust industrial quality – built to last for generations Dsdpfx Aiozqmhgs Eswd For sale is a BRENTA ETYELEC industrial band saw, manufactured by Ateliers de Construction Louis Brenta SPRL (Belgium). This machine comes from a professional Dutch sawmill and was used reliably there for decades. It has been regularly maintained and is in good technical condition. Technical data Manufacturer: BRENTA Type: ETYELEC Motor power: 60 HP (approx. 44 kW) Speed: 340 rpm Band wheel diameter: 1,400 mm Heavy-duty industrial design Suitable for professional continuous operation Condition Band wheels overhauled New bearings on the band wheels Smooth and low-vibration operation Guides and idler pulleys in good condition Ready for immediate use Special features We are deliberately waiting with the disassembly of the machine so that interested parties can still inspect and test the machine while it is running. This gives you the opportunity to personally verify the function, smooth operation, and technical condition of the machine. Advantages Extremely robust construction High cutting accuracy Easy-to-maintain design Proven BRENTA quality Suitable for soft and hardwood Ideal for professional sawmills and woodworking companies This machine was built in a time when industrial machines were designed for a lifespan of decades. Thanks to its robust construction and high-quality workmanship, it is still a reliable investment today. We will gladly provide you with the technical data, dimensions, and drawings upon request. Inspection and demonstration in running condition are possible by appointment. We are available for further information, additional photos, or videos.

Condition: good (used), banana feed conveyor Dsdpjyzup Ajfx Ai Ejwd

Condition: like new (used), Demonstration machine HBB 550 from Hauslhof G-VHBB550R1 Robust band saw for logs with a diameter of up to 55 cm, good cutting accuracy, precise and easy height adjustment for optimal operation. Top part powder-coated, base partially galvanized. Dsdjzqq Nnopfx Ai Eswd Can be extended indefinitely with extension sections. CE certified. The original!, not a copy! Technical data: Max. log diameter 550 mm Max. board width 460 mm Motor output S6 3.7 kW (3 kW S1) Cutting length, basic version 3.7 m Saw band length 3200 mm Saw band width up to 35 mm Cutting length, optional extension section 2.3 m Weight 355 kg

Condition: new, The new log band saw from Hauslhof is suitable for a log diameter of up to 65 cm and has good cutting accuracy. Its ease of use makes it ideal for forest owners who want to start cutting their own wood, regardless of the type of wood. It can be extended indefinitely with extension sections and can be easily assembled and dismantled. Manual feed and cutting height adjustment mean low maintenance. CE tested. Technical data: max. log diameter: 650 mm max. board width: 475 mm motor output power S6: 6.5 kW (5.5 kW S1) 400 V cutting length basic version: 2950 mm saw band length: 3658 mm Dwedpfxovru Ubo Ai Ejd saw band width: up to 35 mm band speed: 20 m/sec cutting length extension section optional: 1.95 m weight: 335 kg possible optional equipment - extension section extends the cutting length by 1.95 m each

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Dwedpfsrmmqzex Ai Eod

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Dwsdpfx Aioxvpd Io Eed

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm Dwsdpfx Aiozki Txo Ejd MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Condition: like new (used), Exhibition / Demonstration Machine The new, state-of-the-art, robust band sawmill from Holzprofi is designed for log diameters up to 75 cm and offers numerous possibilities for cutting your wood and logs correctly. Highest cutting accuracy thanks to a cutting thickness calculator. Base galvanized, upper part powder-coated. Suitable for all types of wood, logs, or reclaimed wood. Comes with a trailer, approved for road use. Can be extended indefinitely with extension sections. CE certified. The original, not a replica! Technical Data: Max. log diameter 750 mm Max. board width 620 mm Motor output S6 7 kW (5.5 kW S1) Motor power, feed motor 0.37 kW Max. feed speed 17 m/min Cutting length 4.2 m (infinitely extendable) Min. cutting length without aids 0.75 m Saw band length 4140 mm Saw band width up to 35 mm Diameter of band wheels 500 mm Band speed 13 m/sec Standard equipment: - Electric feed, infinitely adjustable - Electronic speed display - Electric height adjustment with electronic height display - Cutting thickness calculator with automatic movement to the specified height - Special device for setting the precise wood thickness - 2 base sections - 3 pieces of 90° angle stops Dwedpezqr Hzjfx Ai Ejd - 3 pieces of log clamping devices - Band tension indicator - Bimetal saw band for all types of wood

Condition: refurbished (used), Completely refurbished Bongioanni CRL 4 tensioning wagon with clamping blocks. Track gauge 1200 mm. Rails newly milled. Servo-electric drive. Sale upon customer order. Dwodpfxjxtwxbs Ai Eed