Used Complete Sawmill for sale (10,655)

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Rsdoyr I Dmjpfx Ac Ascb

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Rodezagkzspfx Ac Aecb Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 Rcsdpfx Ajy Uzhfsc Aob with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: excellent (used), Year of construction: 1999, 1. Linck FWK Quick Clamp Carriage Rcedpfxextwv Ts Ac Asb Gauge: 900 mm Travel speed forward/reverse: 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Log diameter: 150–700 mm 2. Linck CV1/SE 600 Full Frame Saw with Variable Width Adjustment Passage width: 760 mm Passage height: 710 mm Saw stroke: 600 mm 3. Removal Device Bm 1/Mbh 4. Side Material Cross-Cut Saw Linck KA 1/ACF Year of manufacture: 1998. Commissioned: 2000 Various tools Sale by customer order.

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Rodpfx Acjxtwwke Ascb Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: new, Year of construction: 2025, EG300EH25S-EMR Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Rcedpfxoyynq Ro Ac Aob Chip box

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Year of manufacture: 2022 Technical data: Motor: Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Min. cutting height: 0.6 cm Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Diameter: 600 mm Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Rcjdpfx Aoylw Sasc Aob Technical documentation and further photos are available.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 13,000 kg, total length: 15,000 mm, saw band length: 9,045 mm, saw band width: 160 mm, wheel diameter: 1,250 mm, Horizontal Band Saw WRAVOR WRC 1250 AC High-performance industrial saw with 55 kW motor — for cutting logs up to diameter Ø 1250 mm Year of manufacture: 2018 General Remont: 2026 Technical Specifications: • Main motor: 55 kW Rcodpfx Ajy Rmx Isc Asb • Fixed command board on sawhead • Control: fixed control panel with Unitronics V-280 PLC • Manual adjustment of cutting thickness possible • Track length: 12.5 m • Hydraulic log clamps: 5 X • Hydraulic rollers: 5 X • Angles (90°): 5 X • Standard log turner: 4 X • Outfeed silon conveyor belt for board transport

Condition: used, Year of construction: 1970, functionality: fully functional, Complete, fully operational sawmill line for sale due to restructuring. Rodpfxex E Sn Ds Ac Aocb The entire system can also be purchased in individual components. Price upon inspection.

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm Rcedowh U Dmspfx Ac Aeb  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Redpfx Acsrmmqzo Aocb

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, AUTOMATIC VENEER SPLICER Flat Maximum prism width 700 mm Maximum prism height 850 mm Maximum prism length 4.2 m Main drive motor 55 kW Danfoss frequency converter for the main motor Main wheels - cast iron - rubber in the middle Main wheels - width 100 mm Diameter of main wheels 1050 Lifting/lowering of the splicer spindle Motor power for lifting/lowering 4 kW Double-sided saw - PV 45, length 7470 mm, thickness 1.2 mm + stellite, width 140 mm Electronic infinitely variable feed of the splicer forward and backward with Danfoss frequency switch 1.5 kW+W63 Digital setting of dimensions with automatic cutting program V-280 - veneer program Hydraulic 40l tank with 13l pump and 4 kW electric motor Complete hydraulic pipes Automatic hydraulic tensioning of the saw + accumulator Hydraulic guide for the saw blade on the left - linear veneer guide + automatic retraction below 100 mm Hydraulic guide for the saw blade on the right - linear veneer guide + automatic retraction below 100 mm Hydraulic arm for pushing lamellas back Additional arm for adjusting lamella pushing Separate control panel from the splicer 8-button 4-position joystick 8-button 2-position joystick + potentiometer Laser 15 mW with holder Camera on the splicer from the front (view of the prism) and start of cutting Automatic water cooling of the saw blade up and down, with water filter, high-pressure water pump Opening for dust extraction - from the front + connection Ø 250 mm Fan 5.5 kW + dust extraction pipe Ø 250 m Central lubrication + automatic electric Wider wheels for feed of the splicer forward and backward and additional protection of switches and track cleaner Welded reinforced track 8500 mm Hydraulic clamp with two cylinders and wedges for prisms 4 pcs Hydraulic lifting/lowering of wedges 4 pcs Hydraulic lifting with automatic roller for prism feed 4 pcs Total lifter 1 pc Hydraulic corner - centering device 3 pcs Turner 3 pcs Automatic output belt SILON 4 m with 1 m extension, + electric motor 1.5 kW - belt lifts and lowers automatically Mechanical roller conveyor for veneer l=4000 mm Inlet ramp (conveyor) for prisms Rcjdpfsy R Tcmox Ac Aob

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage Rcedpfx Aceyzr Tfe Aeb - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, Log infeed Reducer Debarking Block conveyor EWD ZE infeed table Microtec 3D measurement Spaner FZ3 Roller unit EWD EVW Flexible double-shaft circular saw EWD DWK 700 T-6 Rjdpfxey Ivume Ac Aecb 6 flexible saw axes Cutting height 60-340 mm 2x200 kW Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table Redpfjv Hm T Sox Ac Ajcb - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: refurbished (used), Year of construction: 2002, Sawmill ARTIGLIO Year - 2002 - ( Refurbished in 2023 ) Technical Details : - Flywheel - 1300 mm - Flywheel band - 168 mm - Max. blade length - 8860 mm - Three - Phase 400V 50hz Motors - Primary motor power - 55,8 kW - Blade tension motor - 0,55 kW - Pushing blade guidemotor - 1,5 kW - Flywheel inclination motor - 0,12 kW Rcedpfov Ny Nxjx Ac Ajb - Hydraulick brake unit motor - 1,5 kW - Central Crowing Equioment Consists : - 3 Log clamping pressure - Fixed hooks - Mobile knockers with 3 fixed positions - Hydraulicl log turner - El . divider with 50 works programs - Transversal vice movement with two speed motor 1,8 - 8 mt./min. - Hydrostaic advancement with steel cable towing - Comand pult - Automatic centralized rubrication - Pantograph for cable

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Logs Wagon - Trolley - BONGIOANNI Technical Details : Year - 1997 Wagon length - 7 m Number of staples - 4 Eqipment Consisits : 1- Wagon - trolley Rjdperx Rq Ejfx Ac Ajcb 2. El. Cabinet 3. Comand pult 4. Hydraulic drive

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Rcodpoxvpd Ijfx Ac Aob

Condition: used, Year of construction: 2004, functionality: fully functional, cutting length (max.): 8 mm, Equipment: cabin, Complete Artiglio log saw with Eagle 1100/I carriage. It has been maintained by Artiglio in 2018. It is in excellent condition. Redpfx Aev Sr U Ejc Aocb

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Rcodpfxsy Iuuxo Ac Aob

Condition: new, Year of construction: 2025, High-performance industrial bandsaw Wravor WRC 1250 AC – robust, precise, and suitable for cutting large logs. Equipped with automatic control and advanced features for maximum efficiency! 📌 Key features: Redpfoyz Taaox Ac Ajcb ✔ strong and stable construction ✔ high precision ✔ high cutting capacity ✔ automatic control ✔ reliable and robust construction ✔ main wheels made from cast steel, dobule bearing (STABLE CONSTRUCTION!), wheel diameter: 1250 mm, width 135mm ✔ length of saw blade: 160/180 DOUBLE-SIDED) L = 9045 mm ✔ motor power: 55kW -110kW, frequency converter optional Saw width: Approx. 4500mm (depending on equipment) Rail width: Approx. 2300mm (depending on equipment) Saw weight: Approx. 23,500 kg (depending on equipment, on length of chassis) Max cutting width (between guides): 1300 mm

Condition: like new (used), Year of construction: 2021, Complete sawmill plant, including multilayer saw. Rcjdpfxey Icu Ho Ac Ajb

Condition: excellent (used), Year of construction: 2016, We offer this very good WRAVOR WRC 1150 AC complete sawmill (stationary), year of construction 2016. Rjdpoy Hx I Tefx Ac Ajcb Manufacturer: WRAVOR Model: WRC 1150 AC Year of construction: 2016 Condition: very good Category ID: 1389 Type ID: 415 Type: complete sawmill (stationary) If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Complete Sawmill with Carriage Bandsaw and Edger including conveyors Rjdpfx Aey I A H Asc Ascb 4 Headblock Log Carriage - 1200 mm Fully Hydraulic Bandsaw - 1+2 Edger

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Rcodpfx Ajy Hbxhjc Aeb Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026