Used Complete Production Line for sale (32,752)

Year of construction: 2023, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2022/02, Complete EPS Production Line / EPS Block & Insulation Board Manufacturing Plant – Like New Complete, almost-new EPS production system for sale – immediately available in Hungary, European Union. We are offering for sale a complete industrial production system for the manufacturing of EPS blocks and EPS insulation boards. The production line has been used only to a very limited extent and is in excellent condition. This presents an opportunity for an established manufacturer or investor to acquire a complete EPS production facility at a substantially lower investment cost than a comparable new system, without the long delivery and commissioning time associated with a new plant. Two purchase options: 1. Complete production plant including industrial site Price: EUR 859,000 + VAT The complete production system is offered together with the industrial site and the infrastructure included in the sale. 2. Complete machinery and production system without site and containers Price: EUR 769,000 + VAT The complete machinery and production equipment can also be purchased separately and relocated to the buyer's own production facility. Condition and availability The equipment is almost new and has been used only to a very limited extent. The complete production facility is available immediately and can be inspected in Hungary by prior appointment. Technical documentation and further information are available for serious prospective buyers. Djdpjz Alpmefx Ap Ijwc Key advantages: Complete industrial EPS production system EPS block production EPS insulation board production Almost-new condition Very limited use Immediately available Located in Hungary, European Union Significantly lower investment than a comparable new plant No long manufacturing lead time Available with or without the industrial site Technical documentation available Inspection possible by prior appointment Technical handover and support can be discussed individually Assistance with dismantling, preparation for transport, installation and commissioning can be agreed upon separately Investment comparison The estimated replacement value of a comparable new production system is approximately EUR 1.25–1.35 million + VAT, depending on the configuration. Selling price Complete production plant including industrial site: EUR 859,000 + VAT Complete machinery and production system without site and containers: EUR 769,000 + VAT Serious inquiries only. A detailed equipment list, technical specifications, photographs, videos, and further documentation can be provided to prospective buyers. The production facility can be inspected in Hungary by prior appointment.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Dwjdpoi Akrkefx Ap Ijc Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: used, COMPLETE BULK MATERIAL PROCESSING & BAGGING PRODUCTION LINE FOR SALE Dsdez H Ty Ejpfx Ap Iewc Complete production line suitable for the processing, mixing and bagging of bulk materials including peat, bark, stone, sand and other suitable materials. The line includes: • B+C form, fill & seal bagging machine • Holding hopper/s • 2 × fertiliser dosing machines • Mixer • Mill • Bag pressing machine • Palletiser • Hooder • Air compressor • Big bag filling machine – adjustable capacity up to approximately 3 cubic metres • Conveyors and associated equipment Located in Ireland outside Rathangan Co. kildare is and available for inspection by appointment. Suitable for businesses involved in bulk material processing, fertiliser, peat, bark, aggregates or similar products. Further technical specifications, dimensions and operating information available on request.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line Dedpfxjz N A Nis Ap Ijwc VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min VEMAG AH212 hanging machine (Hanging Machine) Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available Dwsdpfx Apjz A Dxke Iec • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control WST-30 Horizontal turning station Minimum element size 320 × 320 mm Djdszm N Nrjpfx Ap Iowc Maximum element size 4,000 × 2,600 mm Maximum element weight 80 kg Minimum working area 320 × 320 mm Maximum working area 4,000 × 2,600 mm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: Welding and deburring line with a turning table for PVC windows. The line consists of: - Welding machine - HOLLINGER MSP, year 2005 Dwedez A R I Eopfx Ap Ioc - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame turning - ROTOX EPA 472, year 2005. The production line was only used in Germany and is in very good condition, having been regularly serviced. Negotiable price: 25,000 euros + VAT.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Complete automatic URBAN welding and cleaning line for PVC windows and doors profiles. System consisting of 2 paralel welding machines: 1 four-head welding units of AKS 6410 27/25, 1 six-head welding units of AKS 6610 27/25, 1 automatic unloading and transfer bench TBA-F 26/28-TE 9M, 2 automatic transport bench TBA-F 26/28H to 1 automatic four-head cleaning unit SV 800/2.5M and 1 final TBA bench. Set of jaws for Komerling Profine profiles. Sold due to company closure. Dwodpjyundrofx Ap Ijc

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine Dwsdpfjzmd Uiex Ap Ioc AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: 1. Cutting to Length Machine – CTB-L/W-1800      Quantity: 1 Maximum cutting width: 1800 mm Cutting angle: ±55° / 90° Pneumatic pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 2. Skiving Machine – SKV-C-N      Quantity: 1 Skiving speed: 30–200 mm/s Pneumatic pressure: 0.7 MPa Installed power: 7 kW Application: abrasive belt joint preparation / skiving Dwsdpfx Aezrzk Eep Iec 3. Abrasive Belt Press – PRS-480       Quantity: 1 Rated pressure: 15 tons Maximum width: 400 mm Press board temperature: 20–60°C Press holding time: 0–999 sec Power supply: 220V / 1PH / 50Hz 4. Rolling Abrasive Belt Press – PRS-R-1900        Quantity: 1 Pressing width: 1900 mm Pressing mode: Rolling Pressure: 350 kgf Press board temperature: 20–60°C Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 5. Jumbo Roll Slitting Machine – SLT-R-1650N Quantity: 1        Slitting width: 50–1650 mm Slitting speed: 2–10 m/min Blade pressure: 6–60 kgf Slitting accuracy: ±0.5 mm Working pressure: 0.7 MPa Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 6. Narrow Belt Slitting Machine – SLT-B-300   Quantity: 1 Application: narrow abrasive belt slitting 7. Belt Slitting Machine – SLT-B-650        Quantity: 1 Belt width: 10–650 mm Belt length: 530–4000 mm Blade pressure: max. 500 kgf Belt tension: max. 160 kgf Air pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 8. Wide Belt Slitting Machine – SLT-B-1600 Quantity: 1 Maximum slitting width: 1600 mm Belt length: 1400–3200 mm Air pressure: 0.7 MPa 9. Abrasive Disc Punching Machine – PUN-40T1500    Quantity: 1 Stroke: 5–150 mm Power supply: 380V / 3PH / 50Hz 10. Portable Forklift – ELS500-1000KG   Quantity: 1 Application: material handling / lifting equipment 11. Moulds / Cutting Dies   Quantity: 44 pieces Various moulds / cutting dies for abrasive disc production Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2018, Complete production line, machinery for window manufacturing Complete window manufacturing system, consisting of: 1. Window processing line Weinig Conturex C 125, year of manufacture 2018, software Klaes 2. Window tooling Oertli 3. Mortise and tenon press WEINIG ProfiJoint 10/6100 LI, year of manufacture 2018 4. Glulam press Patzleiner LHP14 Eurolinie, year of manufacture 2010 5. Veneer press OMC PL105 30/13, year of manufacture 2018 Dodpfx Apszx Ti Hs Iewc 6. Frame press Casolin Euro 3, year of manufacture 2017 7. Profile milling machine Schöberl, year of manufacture 2010 8. Edge profiling machine SCM Kontur, year of manufacture 2003 9. CNC machining center SCM Record 240 NT, year of manufacture 2008, software DDX 10. Oertli tool set 11. Wide belt sanding machine SCM DMC SY TM 1650, year of manufacture 2018 12. Painting system Vidali Finishing, year of manufacture 2019, consisting of: spray booth, spray guns, pumps, overhead conveyors 13. Table saw Felder K 740, year of manufacture 2019 14. Table router Felder F700Z, year of manufacture 2020 15. Table saw Felder K 700, year of manufacture 2020 16. Double miter saw SML Silver P35, year of manufacture 1999 17. Assembly stop table Ruchser, year of manufacture 1995 18. Assembly table Ruchser RU 4 SSP, year of manufacture 1995 19. Glazing table Ruchser RU SW1 90, year of manufacture 1995 20. Workshop cranes Schmalz, 3 units, year of manufacture 2012 21. Cross-bar milling machine Stegherr KSF, year of manufacture 1980 22. Belt sanding machine Kündig Basiq, year of manufacture 2005 23. Belt sanding machine Löwer LZ1, year of manufacture 1995 24. Glue application machine 25. Filling table Barth, year of manufacture 2018 26. Miter saw Omga BR M 4 DX, year of manufacture 2019 27. Table drill Ganner 109, year of manufacture 1988 28. Drill Ganner 370, year of manufacture 1994 29. Dust extraction system Mion & Mosole SSL, year of manufacture 2004 30. Lumber racks 31. Glass bead applicators, 10 units 32. Glass bead applicators, 6 units 33. Glass bead applicators, red, 4 units 34. Glass bead applicators, 4 units 35. Carts, 20 units 36. Mini-mortise milling machine HIRSCH LQP 180, year of manufacture 1992 – Location: Wioska 37. Four-sided planer Weinig Unimat 23, year of manufacture 2004 – Location: Wioska 38. Planer Weinig Uniplan, year of manufacture 2004 – Location: Wioska

Condition: used, Complete Refrigerator Production Line – CANNON & NORTOOL (Sheet Metal, PU Foaming, Assembly, Charging & Packaging), used machine Fully integrated, high-capacity production line capable of manufacturing complete domestic and commercial refrigerators/freezers from raw sheet metal to final packaged products. Key Stations of the Production Line: - Sheet Metal Processing Station - Thermoforming (Vacuum Forming) Unit: CANNON FORMA vacuum forming machine (for ABS/HIPS inner liners and door liners). Dwodszzkd Tjpfx Ap Iec - Polyurethane (PU) Foaming Line: NORTOOL Oy cabinet and door foaming fixtures with high-pressure PU injection system. - Main Assembly Conveyor Line: Integrated assembly line for components, doors, and cooling circuits. - Evacuation & Gas Charging Station: High-vacuum pumping station and automatic refrigerant gas charging equipment. - End-of-Line Testing & Packaging: Electrical safety testing, leak detection, and automated packaging unit. Technical Details & Condition: Manufacturers: CANNON Group, NORTOOL Oy, and integrated custom machinery manufacturers. Condition: Used Inspection: Available upon prior arrangement

Condition: ready for operation (used), A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets. Dedetnilhspfx Ap Iswc

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Automatic central lubrication system CE conformity marking 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 Dwjdpfx Apsz D R S Tj Ijc 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine 6 - Drilling machine SCM Fleximat 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L 14 - Transverse conveyor at the outfeed SCM

Condition: new, Year of construction: 2023, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Year: 2023, never used, still in its original packaging. Dedpfx Aexr Hgxep Iowc

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Sturtz fully automatic welding (2 machines x 4 head) and double head corner cleaning line - 1 x welder VSM40/26 - 1 x welder VSM30/26 - 1 x handling with verticat transport system - 1 x tilting table - 1 x 2 head corner cleaner with drilling head's Dwodpfx Aovkdubsp Iec - 1 x outfeed table adjusted for Rehau Brillant/Euro70, Synego and Geneo the line is still in production, can be inspected in working conditions fully functional, very good conditions

Condition: used, machine/vehicle number: 008781, Position 1: Automated Warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 2: Beam panel saws with automatic warehouse IMA-CUTTING,EDIGING,DRILLING LINE Dwedpez Nx Hkofx Ap Ioc Position 3: CNC machine centres with automatic warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 4: edge bander batch 1 IMA-CUTTING,EDIGING,DRILLING LINE Position 5: CNC for Flexible Drilling IMA-CUTTING,EDIGING,DRILLING LINE Position 6: Robot IMA-CUTTING,EDIGING,DRILLING LINE

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 6582016004, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Dwsdoztxtaspfx Ap Iec Detailed information about the machines is provided in the attached file.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Complete Used Egg Tray Production Line (Molded Pulp) – 3,500 pcs/hour Complete used molded pulp production line for manufacturing egg trays and a wide range of molded fiber packaging. The line is in excellent working condition and is ready for immediate installation and production. Production capacity: Up to 3,500 pcs/hour (30-cell egg trays) Approx. 77,000 pcs/day Approx. 1,925,000 pcs/month The line can produce: 30-cell egg trays 20-cell and 20A egg trays Egg cartons for 6, 10, 12, 15 and 18 eggs (with corresponding molds) Fruit trays Bottle and cup carriers Shoe inserts Protective packaging for electronics and household appliances Medical trays Seedling pots Disposable tableware Other molded fiber packaging The complete production line includes: Hydropulper and complete pulp preparation system Rotary molding machine Vacuum system Air compressor and air receiver Multi-layer gas drying system with heat recovery Hot air circulation and exhaust system Final thermo-pressing machines Automatic labelling machines for egg cartons (6, 10, 12, 15 and 18 eggs) Electrical control system Mold sets Spare parts Dwsdpfx Aezlbm Hjp Iec Complete technical documentation Advantages: Low power consumption Compact industrial design Reliable and proven technology Wide range of molded pulp products Fast installation and commissioning Suitable for both start-up production and capacity expansion Additional services: Installation and commissioning Personnel training Technical support during start-up Production optimization until full operating capacity is achieved The production line is available immediately and ready for shipment. Inspection is possible by appointment. Videos, additional photographs, technical specifications and documentation are available upon request.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Dwjdpfx Aoy S E E Nsp Iec Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0266, year of last overhaul: 2026, workpiece weight (max.): 3,600 kg, power of the milling unit: 10,250 W, disc diameter: 200 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Detailed information about the machines is provided in the attached file. Dwjdpeztyhrofx Ap Ijc

Year of construction: 2000, condition: used, Complete Production Line for Shoe Lasts Manufacturing We offer a complete technological production line for shoe lasts manufacturing — a fully integrated and coherent industrial system designed for reliable, continuous production. The entire line is maintained in very good technical condition. All machines are characterized by: High manufacturing quality Robust industrial construction Low wear level Long-term operational reliability Stable production performance This production system enables a continuous and optimized workflow — from raw material preparation, through semi-finished components, to final machining and assembly processes. The line represents a complete and proven industrial process, ready for immediate operation in manufacturing conditions. European Industrial Quality All equipment originates from renowned Italian manufacturers, including: ARBO Oleodinamica Donzelli Gruppo San Rocco Meber These manufacturers are recognized for: Precision engineering Durability Industrial-grade performance Proven European manufacturing standards LINE STRUCTURE 1. Raw Material Preparation Section 1.1 Granulation Machine 1.2 Material Mixer 2. Semi-Finished Production Section 2.1 Injection Molding Machine (for blanks) 2.2 Standardization Unit 3. Pre-Machining Section 3.1 Last Cutting Saw 3.2 Pre-Copy Milling Machines (2 units) 3.3 Finishing Copy Milling Machines (2 units) 4. Special Machining Section 4.1 V-Cut Milling Machine 4.2 V-Cut Saw 4.3 French Cut Saw 4.4 French Cut Milling Machine 4.5 Chain Milling Machine for Locks 4.6 Pin Insertion Machine for Locks 5. Drilling, Machining & Assembly Section 5.1 Bushing Drilling Machine 5.2 Bushing Installation Machine Djdpfx Asza Ak Rep Iowc 5.3 Multi-Spindle Drilling Machine for Pins 5.4 Last Plate Cutting Machine 5.5 Punching Machine 5.6 Secondary Punching Machine 5.7 Steel Processing Machine 5.8 Plate Forming Machine 5.9 Automatic Trimming Machine 5.10 Last Assembly Tool 6. Finishing Section 6.1 Toe Trimming Machine 6.2 Heel Trimming Machine 6.3 Grinding Machines (2 units) 6.4 Cleaning Machines (2 units) 7. Recycling & Waste Management System 7.1 Chip Grinding Machine 7.2 Industrial Dust Extraction System 8. Tooling Section 8.1 Knife Sharpening Machine

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Dedpfx Aozuukqop Ijwc Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 6582018005, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Dodpfxeztxv Ue Ap Iowc Detailed information about the machines is provided in the attached file.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. Dwedpozvmy Hjfx Ap Isc 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.