Used Feed Line for sale (20,713)

Condition: good (used), functionality: fully functional, For sale: a log feeding line with a turner (Interlog AB). The complete line includes: Log feeding conveyor, length 43 meters Metal detector Log conveyor Log turning device Log dropping conveyor Hydraulic unit and hydraulics All existing electrical and electronic equipment belonging to the line Cedpfxsz Az Awe Aqvohd The line has been dismantled and packed into transport packages (a total of 3 loads). The individual components can also be sold separately. The line is located in Sweden. Please contact us, and we will gladly answer your questions and provide you with a good offer!

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Cedpfx Aqsrn Sqhovehd Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes Csdo Agk Riopfx Aqvohd - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Inventtol B.V.

Condition: excellent (used), CNC Full Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Author 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 912: mm 100 /1000 (o 500+500) 238400A) Loader (Bridge Frame) "MAHROS" single station, Mod. Runner 238400B) Connection transfer unit, with tilter (180°, up-side-down) "MAHROS" Mod. Rib 238400C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 912 - N.2 Vertical electro-spindles (on the Y-axis) for fittings - N.2 upper drilling units, each consisting of: - 2 vertical 36-spindle heads (72 in total per unit) - 1 vertical 14-spindle heads (on the Y-axis) for fittings - 2 horizontal spindles (4 in total per unit) on the Y-axis - N.2 heads with 3 vertical spindles (for hinges) Cjdpfx Ajzx R Akoqvehd - N.2 horizontal units (1 R + 1 L) with N.2 21-spindle heads (21 + 21 = total 42) per unit 238400D) Stacker (Bridge Frame) "MAHROS", single station Mod. Runner

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,000 kg, COMPLETE FEEDING LINE 3v1 UNCOILER + STRAIGHTENER + FEEDER Type CR-AP 400 Year 2013 width = 400 mm thickness minimal 0,5 mm thickness max = 3,0 mm 9+2 straightener rollers UNCOILER: model SM15 Year 2013, motorized, hydraulic expansion pressure arm coil width 400 mm Decoiler capacity 1500 kg The feeding straightener straightens the material and feeds it into the press. The "CR AP" series features an opening head for easier roller cleaning and pilot release. This type of machine is suitable for working with medium-thickness strips. Codez S T Sgepfx Aqvjhd

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Chsdszvaibspfx Aqvod Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations Csdez Rnu Topfx Aqvshd • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: good (used), Year of construction: 2000, functionality: unexamined, Equipment: documentation/manual, Eccentric press VSS, type LE 400 C, complete with LASA strip feed system. Press LE 400 C Table size 1250 x 895 mm Ram size 950 x 560 mm Weight 21,000 kg Nominal capacity 400 t (metric tons) Stroke rate 40/min Stroke length 450 mm Dimensions 1550 x 2900 x 3610 mm Unwinding reel – up to 4000 kg - Coil outer diameter – 1600 mm - Coil inner diameter – 450/550 mm - Strip width – 450 mm - Revolutions – max. up to 25/min LASA 400 strip straightening machine - Adjustable height - Speed – up to 70 m/min - Complete documentation - More information and detailed images available upon request - The straightening machine with unwinding reel can also be sold separately. Chodpfx Aqsz Rk Shsvjd Press – after inspection - Stroke adjustment and clutch-brake

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Inspected and ready for production. Complete coil feeding system integrating uncoiling, straightening, and servo-driven feeding in a single compact unit. Engineered for continuous operation in cut-to-length, stamping, or deep-drawing lines, offering high precision and reliability. Robust equipment, ideal for processing carbon steel, stainless steel, and aluminum. Main Components • Powered hydraulic decoiler  Capable of handling heavy coils  Motorized coil loading car for rapid coil changeovers  Loop control via laser sensor  Protected loading area with safety barriers, ensuring excellent process visibility • Combined straightener-feeder  Head equipped with 11 straightening and feed rollers  AC servomotor with PLC control + touch HMI  Automatic threading and de-clamping functions to facilitate strip insertion • Integrated electrical and hydraulic systems  Independent electrical cabinet  Precise advancement control and synchronization with downstream equipment Key Technical Data  Maximum strip width: 1,400 mm  Sheet thickness: up to 3 mm (carbon steel / aluminum) up to 1.5 mm (stainless steel) Cedpfoy Edfzox Aqvehd  Power supply: 400 V / 50 Hz  Hydraulic pressure: up to 130 bar

Condition: excellent (used), CNC Flexible through-feed DRILLING, ROUTERING AND DOWEL INSERTING LINE Min/Max workpieces (panels) width (X axis) with Author 924: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 924: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 924: mm 100 /1600 (o 800+800) Codpfjzza Nlsx Aqvshd 200027A) Loader (Bridge Frame) "MAHROS" double station, Mod. Runner (max mm 1300) 200027B) Connection transfer unit "MAHROS" (90°) 200027C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 924 - N.4 Vertical electro-spindles (on the Y-axis) (Kw 6,6 ca.) - N.4 upper drilling units, each consisting of: - 1 vertical 36-spindle head - 8 (4+4) horizontal spindles on the Y-axis - 1 vertical 14-spindle heads (on the Y-axis) for fittings - N.2 horizontal units (1 R + 1 L) with N.1 21-spindle drilling head (2x21 = total 42) per unit - N.2 horizontal units (1 R + 1 L) with N. 6-nozzle injection head (2x6 = total 12) 200027D) Connection transfer unit "MAHROS" (90°) 200027E) Stacker (Bridge Frame) "MAHROS", double station, Mod. Runner (max mm 1300)

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm Cjdpow U Rztjfx Aqvjhd year: 2011

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm Cjdpfx Aqjw U R Adovehd year: 2011

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm Cedpfx Asrnq T Neqvshd strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm Csdpfx Aqjrnq Ufjvohd strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels Cjdpfozmtpvjx Aqvehd CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: good (used), Year of construction: 2003, functionality: fully functional, SOPREM Precision Coil Feeding Line (Decoiler + Straightener) — 2003. Complete matched feeding line for thin precision strip, ready to pair with a small high-speed stamping press. Decoiler — Type H1000.1000ZV. Max coil weight: 1000 kg. Coil Ø: 1000 mm outer / 375–520 mm inner. Reel speed: 2–20 rpm, 1.5 kW drive. Straightener — Type BR 19 . 160 . 12 . U . Strip capacity: up to 0.5 mm thick × 160 mm wide. Hydraulically driven precision straightening unit. Both units built 2003 · 400 V / 50 Hz · synchronized line with E-stop interlink to downstream press · Made in Switzerland. Chodjzav H Sspfx Aqvjd Technical Specifications Decoiler / Coil Reel (Haspel) H1000 / 1000ZV / 10M / LK.LF / N1 / G Serial No. (nameplate): 110103 Max coil weight: 1000 kg Coil outer Ø: max 1000 mm Coil inner Ø: 375–520 mm Reel speed: 2–20 rpm Motor: KSMV 90L (4), 1.5 kW, 1400 rpm Gearbox: RMI 110 FL LCB, ratio i = 70 Slip clutch: set to 400 Nm Strip sensing: floor contact plate (loop control) Precision Band Straightener (Richtwerk) BR19.160.12.U Function: straightens coil curvature before the press Max strip thickness: 0.5 mm Max strip width: 160 mm Drive: hydraulically driven precision straightening unit Electrical Supply 400 VAC, 50 Hz, 3-phase + neutral + earth Rating: 25 A pre-fuse

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting. Chodpfxszgayuj Aqvjd

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Chedpfevw Egrjx Aqvsd Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Condition: excellent (used), strip width: 160 - 1.050 mm Cedpfx Aexayynjqvjhd strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: excellent (used), strip width: 160 - 1.050 mm Cjdpfx Aoxayy Ioqvjhd strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. Chodpfx Aey Uk A Ssqvjd VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm strip thickness 0,4 – 3 mm Cedpfx Aolilztsqvshd strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm²

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm Chsdolil Aujpfx Aqvod strip thickness 0,4 – 3 mm strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm²

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll Codjtiy Ntepfx Aqvshd 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² Chodpfolil Ewex Aqvsd reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm