Levelling/feeding line

SCHLEICHER

Condition: good (used), Year of construction: 1983, 1 used SCHLEICHER strip straightening machine with unwinding reel Maximum sheet width: 320 mm Minimum sheet thickness: 0.8 mm (the customer has also processed sheets with a thickness of 0.4 mm) Maximum sheet thickness: 3 mm Hfsdpfjzphauox Aigsl Number of upper straightening rollers: 3 Number of lower straightening rollers: 3 Diameter of the straightening rollers: 70 mm Total power consumption: 1.4 kW Machine dimensions L x W x H: approx. 1300 x 1200 x 1800 mm Machine weight: approx. 1000 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Hedpfx Aisx Tgr Tjgefl Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Hsdpezlbqfjfx Aigefl Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Second-hand machine For dowel drilling on flat or end faces with roller-bearing-mounted drill shaft and tapered claw coupling Driven by any hand-held drill Working width 650 mm with 7 drill shafts Swivelling drilling beam 0° – 45° – 90° Clamping height 80 mm Hfedpfx Aiezk Nq Dogel Minimum drill hole spacing: 30 mm Availability: at short notice Storage location: Flörsheim

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Hfodpjx H Rmuofx Aigol Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1971, Coiler/straightener unit manufactured by SCHLEICHER, type RM-S 300 / H 2. Press force approximately --- tons. Year of manufacture 1971. Structured summary – a full technical translation will follow if required for this lot. Hjdpfx Aiozyncwogjfl

Condition: used, Year of construction: 1987, functionality: unexamined, number of spindles: 19, Schleicher Unidrill 19 Multi-spindle drilling machine Hfodszxk Uyjpfx Aigsl 19 spindles with 5 mm / 10 mm drills The machine is still in use and fully functional. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims due to fraudulently concealed defects also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) Hfedpfx Aisrgzv Nsgjl * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: excellent (used), strip width: 160 - 1.050 mm Hodpfxjxayyno Aigjfl strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t coil OD: max. 1.600 mm Hfodpfsxayy Iex Aigjl

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning Hodpfxsyltr As Aigsfl 16,850 kg 91 kW Top condition

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm Hfedpfx Aelilzteigel strip thickness 0,4 – 3 mm strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm²

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm Hsdpfx Aod Ha E Soigefl strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW Hfsdpfou Rni Hex Aigjl weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Year of construction: 1990, condition: good (used), 8 rolls, Ø 53 mm strip width: 50 - 320 mm strip thickness: 0,4 - 3 mm Hedjgq D Arspfx Aigofl