Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 600 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 125 mm Distance from spindle nose to table: min. 200 mm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 Tool clamping force: 12,000 N Inner bearing diameter: 80 mm Spindle speed: max. 8,000 rpm Main spindle motor at 100% duty cycle: 29 kW Main spindle motor (intermittent): 38.5 kW Speed range with constant power from: 1,500 rpm Feed force X, Y and Z axes at 100% duty cycle: 13,000 N Feed force X, Y and Z axes (intermittent): 16,000 N Rapid traverse rate X, Y and Z axes: 30 m/min Working feed rate X, Y and Z axes: max. 10 m/min Milling performance in steel St 60: 650 cm³/min Drilling diameter in steel St 60: 60 mm Threading performance in steel St 60: M36 Tool places: 24 Tool length: max. 300 mm Tool weight: max. 10 kg Tool diameter with full magazine: max. 85 mm Tool diameter with free adjacent positions: max. 125 mm Tool change time: 3.5 s Tool change time chip-to-chip: 7 s MACHINE DETAILS Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Bwedpfxe Afx Hho Aqvjw Coolant pump capacity: 0.75 kW EQUIPMENT Tool magazine with random tool management Coolant pump

Condition: used, Year of construction: 1970, functionality: fully functional, 1 used: Universal milling machine, second-hand • Manufacturer: Klopp • Model: FW 11/4 • Year of manufacture: unknown, approx. 1970 • Table clamping area: 1100 x 300 mm • Spindle taper: SK 40 • Swivelling milling head: 2x 110° • Spindle speeds: 40/80/120/240/480/960 • Feeds: 12–340 mm/min Bedpfxsw R T A Ej Aqvjww Accessories: Various tool holders and cutters, 1 set of collets Hydraulic vice with pneumatic support pins Vice jaw width: 160 mm

Year of construction: 2013, condition: good (used), Ref. -No.: 10717 Manufacturer: POSMILL Type: H 800U Year of construction: 2013 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine number: 2013xxxx X-Travel: 700 mm Bedpfxo Ahw R Nj Aqvoww Y-Travel: 820 mm Z-Travel: 600 mm Tool Taper: HSK-A 63 Tool places: 96 Spindle Speeds: 18.000 RPM Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, controller model: Heidenhain TNC 430, TECHNICAL DETAILS Travel in X-axis: 710 mm Travel in Y-axis: 550 mm Travel in Z-axis: 500 mm Table dimensions: 900 × 600 mm Table load capacity: max. 1,600 kg Spindle speed: 18,000 rpm Spindle mount: SK 40 Bjdj Ah H Ilspfx Aqvsww MACHINE DETAILS CNC control: Heidenhain TNC 430 Machine weight: approx. 10,000 kg EQUIPMENT High-pressure coolant system High-speed spindle

Condition: good (used), Year of construction: 2020, x-travel 1.300 mm y-travel 290 mm z-travel 450 mm table-size 1.600x 320 mm table load 0,5 t spindle turning speed range 80-5.000 U/min spindle turning speeds of horiz. head: 60-1.800 U/min spindle taper vertical SK40 Bwodpfx As Ahzi Njqvsw spindle taper: hori. SK50 quill stroke 127 mm feeds x/y/z -stepless 0-1.000 mm/min rapid traverse X-axis 5 m/min total power requirement 10 kW weight of the machine ca. 2,7 t dimensions of the machine ca. LBH 1,9 x 2,1 x 2,5 m -Swiveling milling head with quill feed; -Horizontal spindle with independent drive; -Pneumatic tool clamping system; -3-axis position display; -Electronic handwheels; -Pneumatic tool clamping; -Coolant system; -Work light; -Chip tray; -Manual central lubrication; -Hydraulic machine vise; -Various tool holders; -Various horizontal tool holders; -Collet set in a case; -Outboard support (counter-bearing) for horizontal milling

Condition: used, Year of construction: 2000, machine/vehicle number: VH20011, controller model: Heidenhain TNC 426, No minimum price – guaranteed sale to the highest bidder! Bwsdpe Ah Dtwsfx Aqvsw TECHNICAL DETAILS CNC control: Heidenhain TNC 426 Tool holder: SK 50 EQUIPMENT Rotary milling head Various tool holders Note: The machine is sold without tools.

Condition: reconditioned (used), Year of construction: 1994, operating hours: 27,545 h, functionality: fully functional, machine/vehicle number: 3701104, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 4,000 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 1,500 m/min, spindle speed (max.): 5,000 rpm, quill stroke: 60 mm, spindle mount: MK 0, total height: 2,000 mm, total width: 2,500 mm, total length: 2,000 mm, table width: 475 mm, table length: 700 mm, type of input current: three-phase, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,000 kg, input voltage: 380 V, workpiece weight (max.): 300 kg, space requirement length: 2,000 mm, space requirement height: 2,000 mm, input current: 25 A, Equipment: documentation/manual, rotational speed infinitely variable, Well-maintained milling machine from a training center, equipped with a HEIDENHAIN TNC 415B control system and an SK 40 milling spindle. It features a hydraulic clamping system and an automatic central lubrication system, and comes with technical documentation and an operating manual. Bsdpfj Ahfihex Aqvsww

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. Bwedpfxoxpudtj Aqvow The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Year of construction: 1993, condition: ready for operation (used), travel distance X-axis: 4,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 407, spindle speed (max.): 2,000 rpm, number of axes: 3, This 3-axis Kekeisen UFF4000 bed type milling machine was manufactured in 1993. It features a HEIDENHAIN TNC 407 CNC control and a spindle speed of 2,000 RPM. The machine includes a stationary floor-level clamping bed with longitudinal T-slots, ensuring stability during operations. If you are looking to get high-quality milling capabilities, consider the Kekeisen UFF4000 machine we have for sale. Contact us for further details. Bwjdpfj Ah H H Sex Aqvow - Machine Type: Traveling column / bed milling machine- CNC Control: HEIDENHAIN TNC 407- Number of Controlled Axes: 3- Spindle Speed: 2,000 RPM- Machine Operational Status: Powered on and fully operational- Machine Bed & Table: Stationary floor-level clamping bed with longitudinal T-slots

Condition: good (used), Year of construction: 1986, CNC universal milling machine Bwsdpfxj Ahqx Es Aqvjw Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: used, total height: 1,900 mm, total width: 1,800 mm, total length: 2,100 mm, Colour: Green Empty weight: 2.000 kg - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 6.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 290 - Z-axis travel [mm]: 450 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 1250 - Table width [mm]: 280 - Tool holder: ISO40 - Min. spindle speed [rpm]: 35 - Max. spindle speed [rpm]: 1800 - Options: Chip collection tray, Digital readout, Drill milling machine Bedj Ahy Afjpfx Aqvoww - └ Type of digital readout: Mitutoyo - Transport dimensions: 2100mm x 1800mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, We are selling a used 3-axis machining center, WAGNER WMC 1100, in very good condition. The machine was manufactured in Taiwan. It was only used for the production of individual parts and therefore has very few operating and power-on hours. Technical data: Table: 1300 x 600 mm Table load: 500 kg X-axis: 1100 mm Y-axis: 650 mm Z-axis: 600 mm Control: Siemens 828D Tool positions: 24 Spindle head: BT-40 Spindle speed: 8000 rpm Accessories: Bwodo Agwvuepfx Aqvew 1 x Chip conveyor 1 x Band filter 1 x Measuring probe 1 x Broken tool detection 1 x Coolant system 1 x Handwheel

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Selling price: 300,000 Euros Earliest possible pickup date: May 2027 Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of manufacture: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of manufacture: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of manufacture: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The manufacturing cell is in good condition and has been in continuous production. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, no known defects are present. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Bwjdpfjzxf Hksx Aqvew Inspection is possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can coordinate the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: good (used), Year of construction: 1986, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Bwjdo Ahxm Iopfx Aqvsw Machine weight approx.: 4 t

Condition: ready for operation (used), Year of construction: 1984, travel distance X-axis: 1,650 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, overall weight: 7,000 kg, Heidenhain 3-axis control system Variable speed drive for continuous feed Bodpszx Em Dsfx Aqveww Table size: 2000 x 700 mm Travel: 1650 x 1000 x 1000 mm Maximum spindle speed: 2066 rpm External electrical cabinet Automatic lubrication Weight: 8000 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 310 CNC control – excellent condition, CE compliant!! Technical data: >> Year of manufacture: 2006, Machine no. 370562 >> Milling table clamping surface: 800 x 425 mm 6 clamping slots Slot width: 14 H7 Slot spacing: 63 mm Maximum load: 300 kg >> Spindle speeds up to 4500 rpm >> Feed rate range up to 2000 mm/min Rapid traverse rate up to 5000 mm/min >> Travel distances X/Y/Z: 600/400/400 mm Bodpo Ahyl Tofx Aqvsww >> Vertical and horizontal spindle – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and equipment: >> Heidenhain TNC 310 CNC control >> Hydraulic clamping system, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, parts lists, operating manual >> Full-protection enclosure >> Coolant system About the machine: Offered is a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 CNC control. This universal milling machine is in very good condition. It features a very easy-to-use control system. Furthermore, the machine has hydraulic clamping systems for both vertical and horizontal operation. Changing from vertical to horizontal operation is very simple, by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: used, Year of construction: 1999, functionality: fully functional, x-travel 4500 mm y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Bsdpfxswhqyqj Aqvjww Cube 2 weight of the machine ca. 20.000 t

Condition: used, Universal tool and cutter grinding machine DECKEL, Type FP 3 Serial No. 2201 - 5240, Year of manufacture 1981 Control system Type 2201, Serial No. 5594 Travel distances: X: 500 mm, Y: 300 mm, Z: 380 mm (manual adjustment and without bellows) Travel distances: X: 490 mm, Y: 290 mm, Z: 340 mm (with feed) Table size: 800 x 420 mm Spindle mount: SK 40 - S20x2 Tailstock travel: 100 mm Spindle speed: 25 - 2500 rpm, 18 steps Feed rate: Feed 5 to 500 mm/min. Rapid traverse speed: approx. 1200 mm/min. Motor power, spindle drive: 2/4 kW, pole-switching Power connection: 380 Volt, 50 Hz Bjdpfxj Ahzl Ds Aqvsww - Active digital display for 3 axes, HEIDENHAIN Type TNC 111 - Stepless feed in the X, Y and Z axes - Mechanical handwheels for all three axes - Spindle speed via 2 motor speeds and 18 gear stages - Vertical milling head, swiveling and extendable 200 mm horizontally - Fixed angular table 800 x 420 mm - Coolant system with mechanical pump in the machine base - Central lubrication - Control cabinet located beside the machine - Protective enclosure with hinged doors around the machine table - Original chip tray for attachment to the machine base Space requirement L x W x H: 1600 x 1600 x 1750 mm Weight: 1400 kg Good condition

Condition: good (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,600 rpm, controller model: DECKEL Contour 3, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 700 mm Table width: 460 mm Table load capacity: 350 kg Spindle speed: 40–3,600 rpm Tool interface: SK 40 MACHINE DETAILS Control system: DECKEL Contour 3 EQUIPMENT Bwodpe Afxabjfx Aqvsw Automatic tool changer

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 4193, total height: 1,789 mm, total width: 1,300 mm, total length: 1,200 mm, overall weight: 1,500 kg, Weight 1,5 t serial number 4193 ja vice ja x-travel 500 mm length 1200 mm Bwsdpfezxt Tlsx Aqvjw width 1300 mm height 1789 mm

Condition: good (used), TOS fnk 25 – milling machine Bedpfx Aj Ahfd Ssqvoww Table dimensions: 1250 × 290 mm, 800 mm X-axis travel 370 mm Y-axis travel 450 mm Z-axis travel Automatic feed on the drill quill, 3 settings: 0.035 / 0.070 / 0.140 Automatic feed and rapid traverse on the X and Y axes Electric traverse (rapid traverse) on the Z-axis Spindle ISO 40 with a speed of 56–4500 rpm, Table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) Machine weight: approx. 1.7 tons. Year of manufacture: 1986

Condition: used, Year of manufacture: 1992 Empty weight: 3.800 kg Dimensions (LxBxH): 210 x 260 x 260 cm - Year: 1992 - Serial number: 610555 - Drive system: CNC - Control system brand: Fanuc - Power [kW]: 7.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 610 - Y-axis travel [mm]: 460 - Z-axis travel [mm]: 510 - Table length [mm]: 950 - Table width [mm]: 560 - Tool holder: BT40 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 6000 Bwode Ahxpiopfx Aqvew - Transport dimensions: 2100mm x 2600mm x 2600mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Universal milling machine Mikron WF 2!!! Technical data: >> Fixed angular table >> Speed: 12 speeds from 50 - 2240 rpm >> Feed rate in 3 axes from 8 – 400 mm/min >> Rapid traverse in 3 axes 1400 mm/min >> Travels X/Y/Z: 420/250/345 mm >> Vertical and horizontal quill – SK40 >> Collet system S20x2 >> Weight approx. 850 kg >> Central lubrication About the machine: Bwedpfx Aqo Ahq Hzovjw A Mikron WF 2 universal milling machine in working condition is offered for sale. What makes this machine special are its travel distances, which are very large in relation to the machine's size: Z = 345 mm, X = 420 mm, and Y = 250 mm. Take advantage of the opportunity to inspect and test this machine on site while it is powered up.

Condition: good (used), Year of construction: 1991, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, X-travel: 560 mm Y-travel: 500 mm Z-travel: 400 mm Control: TNC 360 Spindle speed: 40-4,000 rpm Total power requirement: 7.5 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m Bedpfxs Ahxpfs Aqvjww

Condition: used, travel distance X-axis: 9,000 mm, table length: 2,800 mm, table width: 8,000 mm, table load: 64,000 kg, TECHNICAL DETAILS Longitudinal travel: 9,000 mm Transverse travel: 2,950 mm Vertical travel: 1,250 + 2,200 mm Rapid traverse rates for longitudinal/transverse/vertical axes: 3 / 3 / 2 m/min Bodpfj Agftiox Aqveww Table size: 2,800 × 8,000 mm Table division: 5,000 + 3,000 mm Permissible table load: max. 64,000 kg Spindle speed: 20–600 rpm Spindle motor power: 100 kW Spindle torque: 13,000 Nm Spindle mounting: ISO 60 Distance between columns: 3,200 mm Distance from spindle nose to table: 2,806 mm MACHINE DETAILS Overall dimensions: 21,000 × 7,800 × 6,650 mm EQUIPMENT 90° head Compact 90° head Vertical extension Swiveling head 3-stage gearbox Note: The machine is in good condition. However, an overhaul may be necessary.