Used universal milling and boring machines for sale (51)

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: SIEMENS 840D Solution Line (electrical overhaul in 2017) X-travel: 7,000 mm Y-travel: 2,100 mm Z-travel: 1,500 mm Z-travel (spindle in vertical position): 1,200 mm Feed rate X, Y, and Z axes: 2–12,000 mm/min Rapid traverse speed X, Y, and Z axes: 12,000 mm/min Universal milling head UFKSpindle speeds: 22 - 2,400 rpm Drive power 100 / 60 ED: 31.5 / 39 kW Max. torque main spindle: 2,200 Nm Swivel range of milling head (C axis): 180° Swivel range of milling head (A axis): 340° PREISELER AWU 650 automatic reversible clamping device Year of manufacture: 1995 with FORKARDT F630 vertical three-jaw chuck: 630 mm Center height above plate: 500 mm Max. workpiece weight (clamped in flight): 2,000 kg Bdedsxz Ecqjpfx Agcek Max. workpiece weight (with counter bearing): 4,000 kg Counter bearing with hydraulic quill Tailstock quill taper: MK6 Tailstock center height: 500 mm Clamping plate Dimensions (LxWxH): 6,000 x 1,500 x 300 mm Max. load: 90 t T-slots: 6 pieces 28H7 (DIN650) T-slot spacing: 250 mm Coolant system with paper belt filter Manufacturer: ALLWEILER AG Type: PF 60 DVS / 500 Pump capacity at max. 3 bar: 40 l/min With recirculation unit Equipped with Automatic turning clamp with worm gear: PEISLER AWU650 Various roller blocks and supports6 UK500 machine clamping tablesMAYFRAN TYPE MT10 hinged belt conveyor SIEMENS SINUMERIK HT2 electronic handwheel Milling head design with hydromechanical rapid tool clamping Direct contactless measurement via linear measuring systems Oil circulation lubrication for main gearbox and milling head drive Work platform traveling in X direction, protective cover with viewing windows The machine is in exceptionally good condition and can be viewed under power. In 2017, a new SIEMENS 840D Solution Line control system was installed, and all drive motors and the control cabinet were replaced.

Condition: excellent (used), Year of construction: 1975, O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following available ex-stock: DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 _____ Table travel: - Longitudinal (motor/manual): 390 / 400 mm - Vertical (motor/manual): 390 / 400 mm Cross slide travel (motor/manual): 190 / 200 mm Fixed angle table: 250 x 700 mm Distance from spindle to table: 400 mm Spindle overhang: approx. 165–465 mm Bdodpfsxzk Irex Agcek Spindle taper: SK 40 18 spindle speeds: 40–2,000 rpm Infinitely variable feed range: 5–400 mm/min Rapid traverse: 1,200 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 1,000 kg Accessories / Special equipment: • DECKEL universal swivel angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with independent drive • Large original DECKEL tool cabinet for storage of the above accessories and various arbors, approx. 30 collets, various milling tools, additional arbors, etc., as well as operation tools, separate electrical cabinet, coolant system Condition: Very good – demonstration ready, ideal for training workshops/apprenticeship use Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We always have further DECKEL FP 1 / FP 2 / FP 4 milling machines in stock, as well as accessories such as spiral milling attachments, etc.

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 Bjdpfxjq Ulucs Agcedk With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: new, The SBF 40 TV 1000 is a versatile machine tool in the Conventional Vertical Milling Machines category, belonging to the Mill Drills group. This robust drilling and milling machine excels with a powerful drive and a wide speed range, making it an ideal choice for working with steel and non-ferrous metals. Notably, its large compound sliding table features an automatic infinitely variable feed on the X-axis, allowing for precise coordinate drilling and light milling. Equipped with an oil-bath lubrication system, the quiet operation enhances tool life and durability, while the high-quality spindle bearing supports higher loads over extended periods. The head can swivel for diverse applications, and it includes convenient features like controllable automatic feed, adjustable table guides, and a built-in coolant system. With the SBF 40 TV 1000, you can enhance your machining capabilities at an unbeatable price. Request a quote today to get started with this impressive milling solution from KNUTH! Bedeuyibcspfx Agcjdk

Condition: used, Year of construction: 1977, Technical details attached. Rotary table 4500x4500 , travel 4000mm, max load 100 ton. Floor plates 6 pcs. 2000x4000 It was retroffited with CNC Siemens 840D Bdsdpecfkn Ujfx Agcek More pictures and details on request. Video with the machine working is available on request.

Condition: good (used), Hello, Universal milling machine FY-321 for sale. Bodpfx Aexykbiegcodk The machine is fully operational and in continuous use, with the possibility to test on site. The price stated in the advert is net and is subject to VAT. The machine can be inspected in Starachowice, at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: good (used), KÖLSCH - Universal Milling Machine - Universal milling machine suitable for pitch circle and full circle operations. - Drilling of hole patterns with integrated indexing table and coordinate milling table. Dimensions: LxWxH 1.7x1x1.9 meters / Weight approx. 900 kg Errors and omissions excepted. Bedpfx Asxw H Dzjgcsdk

Condition: new, WMD20LV - 230V / 1F Drilling capacity steel ----- 20 mm Milling capacity steel ----- 20 mm Flute cutters ----- 63 mm Motor ----- Brushless 750W Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle mounting ----- MK2 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal displacement ----- 490 mm T-slots ----- 3x12 mm Unloading ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 150 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Box with various tools Bdsdpfxsh S E Sbj Agcek OPTION * Support box € 249,00 ex vat

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 Bdedpfx Ajxc It Isgcok 3-axis Heidenhain digital readout Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Vertical milling head Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system 4 machine leveling pads

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min Bsdpfx Aoxndahsgcodk work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Ladies and Gentlemen, We hereby offer a Deckel FP1 3-axis active milling machine with retrofitted safety devices. These machines of the newer version have, among other things, central lubrication, an electric coolant pump and a brake motor. In addition, the control cabinet can be disconnected from the machine in no time at all thanks to the Harting plug. This type of connector is also used to connect the safety components to the control cabinet, so that handling is not compromised in any way. The retrofitted safety devices, which we can offer for every machine type, come with a 12-month guarantee! Bsdpeuw Uu Nsfx Agcodk The electronic spindle guard can be adjusted in several axes and is designed to prevent interference with the working spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cap is designed to prevent interference with the rotating stub shaft and tool clamping. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: rigid angular table Travel: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1,9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min Equipment and accessories: Coolant device, central lubrication, manual, machine feet, electronic spindle protection, electronic spindle protection cap Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: good (used), Hello, Bjdpfsxyi Stjx Agcedk For sale: Coordinate drilling machine and universal milling machine, type 6T83-1. The machine is fully operational and in continuous use; inspection and testing on site are possible. The price listed in the advertisement is net and is subject to VAT. The machine can be viewed in Starachowice, Kwiatkowskiego 13. Telephone contact available from 7:00 to 16:00.

Condition: used, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 475 mm, overall weight: 1,850 kg, table length: 1,100 mm, table width: 250 mm, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X750 Y280 Z475 mm. Table size: 1100 x 250 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5 HP. Digital readout: Heidenhain Positip 850 (X, Y & Z) Country of origin: Spain. Size (L x W x H): 1850 x 2100 x 2000 mm. Weight: 1850 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout, work ligth and 3-axis Heidenhain digital readout. All our machines are tested and serviced before delivery. Bdjdpfx Aoxpfy Eogcok

Condition: new, WMD45 - ROGI Drill Cutter Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement of the work table ----- 560 mm Transverse displacement of the worktable ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3F INCLUDED * Drill head with pin ISO30 - B16 * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * Tap function * Digital depth stop * CE plug OPTIONS Bdodoga T Anopfx Agcok * Base cabinet * Router clamp * ISO30 router bit holder + 12 collets in case * Router set

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: Bsdpsxuh Rdjfx Agcjdk - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Spindle RPM adjustable from 100 up to 2900. Bdedpfx Aoxnvrvogcok Geared head. 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! €2,800.00 EX VAT!

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, for sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly distinguished by its ease of operation. This newer version from year of manufacture 1989 has among other things a central lubrication, an electric coolant pump and a machine lamp. The machine has been extensively overhauled in our workshop and is therefore in excellent condition. You can convince yourself of this on site. In the course of the partial overhaul, among other things, the following work was performed: - Spindle bearing of the milling head renewed - Repainting - Various standard parts such as handles, oil sight glasses, keys etc. renewed - Wear parts like drive belts etc. renewed - Bellows partly renewed - V-guides adjusted - and much more... Bjdpjpy Eldefx Agcedk Delivery time: immediately year of manufacture: 1989 Machine No. 2102-xxxx Table: rigid angle table travels: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW number of spindle speed: 16 Speed range: 40-2000 rpm Dlp00n tool holder: SK40 feed rate: stepless 5-500 mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in

Condition: excellent (used), Year of construction: 1983, x-travel 450 mm Bdsdpfx Agoxdnplocek y-travel 200 mm z-travel 465 mm total power requirement 2,6 kW weight of the machine ca. 1.2 t

Condition: used, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 8 rpm, overall weight: 3,850 kg, Spindle taper: ISO 40 RPM.: 8-1200. Travel: X1500 Y700 Z500 mm. Table size: 2000 x 420 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Country of origin: France. Size (L x W x H): 2000 x 2200 x 1700 mm. Weight: 3850 kg. Bjdpfoxn R U Sox Agcjdk Rapid speed, and automatic feed in X, Y & Z. With vice. All our machines are tested and serviced before delivery.

Condition: new, WMD25LV - 230V / 1F Drilling capacity steel ----- 25 mm Milling capacity steel ----- 20 mm Flute cutters ----- 63 mm Motor ----- Brushless 750W Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle mounting ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal displacement ----- 490 mm T-slots ----- 3x12 mm Unloading ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop Bdedpfega T Eiex Agcsk * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Box with various tools OPTION * Support box € 249,00 ex vat

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, Bodjiqkc Ispfx Agcodk travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: excellent (used), functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 4,000 mm, table width: 1,000 mm, CNC ECS 2301 (with the possibility of retrofitting) SPINDLE ISO 50 DIN 2080 taper AC motor: 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3.000 rpm Two automatic ranges TABLE (X-axis) Length 4.000 mm Width 1.000 mm Travel 4.000 mm Bdjdpfjw Axmnex Agcjk Number of T-slots: 7 Width of slots: 18 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' HEAD (Y-axis RAM) Y-axis travel 1.000 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' VERTICAL CARRIAGE (Z-axis) Z-axis travel 1.500 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' COLUMN (W-axis) W-axis travel mm 1.300 Working feed mm/1' 0 – 8.000 Rapid feed mm/1' - 15.000 ACCESSORIES: 40-position tool magazine

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 35 rpm, overall weight: 2,600 kg, table length: 1,525 mm, table width: 325 mm, Spindle taper: ISO 50 RPM.: 35-1800 variable. Travel: X1050 Y330 Z475 mm. Table size: 1525 x 325 mm. Automatic feed: X, Y & Z. Bodpsxn R Tnsfx Agcjdk Rapid speed: X, Y & Z. Motor: 5,5 kW. Digital readout: Fagor Innova (Z). Year: 2002 Country of origin: Spain. Size (L x W x H): 2400 x 2500 x 2200 mm. Weight: 2600 kg. Variable speed in 2 gears. All our machines are tested and serviced before delivery.

Condition: new, WMD30LV - 230V / 1F Bdedpfx Agsga T Agocjk Drilling capacity steel ----- 32 mm Milling capacity steel ----- 20 mm Flute cutters ----- 76 mm Motor ----- brushless 1.5 KW Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle mounting ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal displacement ----- 565 mm T-slots ----- 3x14 mm Unloading ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling clamp * ISO30 Collet holder & 12 collets in case * Milling set

Condition: new, WMD45A ROGI Drill Cutter VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement ----- 560 mm Cross travel ----- 230 mm Bdodpfx Asga Tyzogcok Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDED * 3-axis digital readout brand SINO * Automatic longitudinal feed worktable * Drill head with ISO30-B16 shank * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * LED work light * Cooling system * Tap function * Digital depth stop * Milling head motorized height adjustable * Various tools in suitcase