Used Manual Mill for sale (23,776)

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Ndjdpfx Aey Iyw Ssmtjc

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; Nedev Hcwtopfx Amtedc – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Ndedex Hkd Hepfx Amtec Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total height: 1,560 mm, total width: 1,100 mm, total length: 700 mm, overall weight: 400 kg, workpiece weight (max.): 100 kg, Apex comminuting mill Njdoz D Tbwjpfx Amtjdc Capacity > 100 kg / h (The engine is larger than Schutte) Stainless steel Simple design Compact size Used machine Screen sizes 2mm + one very small one (Will we get desired particle size)

Condition: used, Year of construction: 1988, Deckel FP4MA 2204 – CNC Machining Center - General overhaul in 2022 - Heidenain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with retractable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearbox - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement Ndedpfxj Adr R Ds Amtjc - Collision protection coupling in the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools, and tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle head: 150 mm Main drive: - Pole-changing three-phase brake motor: Gearbox with right/left rotation - Power: 3.7 / 4.4 kW - Spindle speed: 63 - 3150 rpm (18 steps) - Step jump: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table carriage: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (with safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and rotary table: approx. 1830 kg - Operating voltage: 400 V - Total connection value: 12.5 kVA - Floor load: 3000 kg/m²

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool holder DIN 2080 ISO 40 Travel ranges X-axis, automatic/manual 1000 / 1020 mm Y-axis, automatic/manual 350 / 370 mm Nedod D Tf Hspfx Amtsdc Z-axis, automatic/manual 430 / 450 mm Speed range, 2 steps 32 – 1400 rpm Quill in vertical milling head yes Milling head, swiveling ± 90° Feed range X/Y-axis, stepless 10 – 1000 mm/min Feed range Z-axis, stepless 4 – 400 mm/min Rapid traverse X/Y-axis 5 m/min Rapid traverse Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Space requirement L x W x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories / Special features: • NC point-to-point control HEIDENHAIN TNC 131 S • RS 232 interface • Stepless feed • Automatic and/or manual operation possible • Safety devices / prompts to secure the hand crank when the X-Y and Z axes are moved manually, as well as the manual tool clamping • Vertical and horizontal milling spindle • Quill in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm Ndodpfsu Ndhisx Amtec - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Speed: 1,470 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – Continuous operation Ndsdpezr Hziefx Amtec Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: excellent (used), Used Deckel FP 1 Aktiv tool milling machine. The machine is in good technical condition and ready for operation. It has a robust construction and the necessary functions for performing precise milling operations. The machine is equipped with manual and automatic feeds, as well as automatic feeds controlled by a simple NC system. Net price: 23,000 + VAT Spindle taper: 40 Travel: X: 300 Y: 160 Nodpfx Aszy Rwwomtedc Z: 340 Spindle speed: 63-2000 rpm Extendable quill

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Ndsdpszvgdlefx Amtoc Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, CNC universal milling machine HERMLE U 630 T With Heidenhain TNC 426 path control system Year of manufacture: 1998 Travel distances: X 630 (875) Y 500 Z 500 Spindle speed range: 20 – 7,000 rpm, stepless Including the following accessories: Fixed swivel table, 900 mm x 528 mm clamping surface Nodpfxj Aa Akto Amtodc Vertical tool changer with 16 magazine positions Full enclosure with sliding doors and interior lighting Electronic handwheel 3D measuring probe Heidenhain Coolant system 4 adjustable machine feet Operating manuals

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, CNC control: HEIDENHAIN iTNC 530 (HSCI) with a 15.1" flat-screen display and a pivoting control panel Ndsdpfsz Tugbsx Amtec 2. Work table / Clamping surface Length: 2,200 mm Width: 1,000 mm Maximum transport load: 7,200 kg Number of T-slots: 7 Size of T-slots: 22 H12 mm Reference slot: 22 H7 mm T-slot spacing: 140 mm 3. Automatic milling head (Option -AIH60A OIL) Design: Diagonal, swiveling in 2 planes Speed range: 0 – 6,000 rpm (Option) Tool holder: DIN 69871 AD (ISO 50) / Taper DIN 69871 Draw bolt: DIN 69872 Form A Tool clamping force: 15,000 N Lubrication: Automatic grease cycle lubrication (housing made of steel cast GS 60, designed for 45 kW and max. 2,000 Nm) 4. Main spindle drive motor / Manufacturer: Siemens, main spindle drive, Type: 1PH7 Drive power max. (Option): 36 kW from 376 rpm (standard equipment 30 kW) Maximum torque (Option): 930 Nm (constant up to 376 rpm; optional in gearbox up to 1,460 Nm or 1,750 Nm) Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching and helical gears made of hardened chrome-nickel steel Spindle speeds (6,000 rpm Option): Low range: 0 – 984 rpm Medium range: 918 – 2,456 rpm High range: 2,404 – 6,000 rpm 5. Axis drives and axis feeds Axis drive motors: Manufacturer Siemens (digital AC drives) Rapid traverse max. (X/Y/Z axis): 15,000 mm/min Working feed max. (X/Y/Z axis): 12,000 mm/min Feed force max. (X/Y/Z axis): 24,000 N Measuring system: Linear measuring system “Heidenhain” (0.001 mm) in all axes Machine weight: approx. 17,000 kg Connection power: approx. 54 kVA Materials: Machine bed, work table, machine frame and vertical slide made of lamellar graphite cast iron GG30; milling slide made of nodular graphite cast iron GJS-600 Guide rails: Hardened and ground with Turcite B sliding strip coating (in X/Y/Z) Hydraulic system: Manufacturer Rexroth (including hydraulic weight compensation in the vertical axis) Lubrication & cooling: Automatic central lubrication of axes/ball screws, control cabinet with lighting and air conditioning unit Additional control: Portable electronic handwheel “Heidenhain HR-410” with axis selection, additional electric foot pedal for manual tool change Enclosure & Safety: 4-sided splash guard enclosure with large sliding doors, safety switches (CE compliant) and safety fencing for the rear.

Condition: like new (used), Year of construction: 2004, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 2000 x 900 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Manual milling head (U22)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 22 kW Feedrates Rapid feedrate (X / Y,Z): 20000 / 12000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approximate: 14000 kgMachine dimensions approximate: 6367 x 5070 x 2803 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceTool pedal: new foot clamping tool pedalElectronic handwheel: New HR-510Coolant: external Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Nodpfx Ae Admb Remtsdc

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, spindle speed (max.): 8,000 rpm, table width: 406 mm, table length: 1,372 mm, rotational speed (max.): 8,000 rpm, overall weight: 3,100 kg, space requirement width: 2,280 mm, space requirement length: 2,900 mm, space requirement height: 2,550 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis: 1.000 mm Y-axis: 500 mm Z-axis: 530 mm Table size: 406 x 1.372 mm Spindle nose: BT 40 Spindle speeds: 1 - 8.000 rpm Controller: Fagor Featured with: - Cooling unit - User Manuals Country of origin: Taiwan Motor power: 10 HP Machine LxWxH: 2.900 x 2.280 x 2.550 mm Nedpfx Amsvpl I Totedc Machine weight: 3.100 kg

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m Nodpfxju Ndf Is Amtsdc clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. Ndjdpfezvgvnex Amtec 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Condition: used, RETSCH Ultra Centrifugal Mill / Laboratory Mill / Fine Grinding RETSCH ZM 200 Ultra Centrifugal Mill incl. DR 100 dosing unit and extensive accessories For sale is a used ultra centrifugal mill from the manufacturer RETSCH, including a DR 100 dosing unit and extensive accessories as shown in the pictures. The ZM 200 is suitable for rapid fine grinding of various materials and for use in laboratories, research, development, and quality control. Technical data ZM 200: Manufacturer: RETSCH GmbH Type: ZM 200 Equipment type: Ultra Centrifugal Mill Power connection: 1~ 200–240 V Frequency: 50/60 Hz Power according to nameplate: 1100 W Current consumption: 12 A Dimensions (L × W × H): approx. 515 × 410 × 365 mm CE marking Dosing unit: RETSCH DR 100 Dosing unit for controlled material feed with adjustable dosing speed Interfaces ZM 200: Connection for DR 100 RS232 RS485 Equipment: RETSCH ZM 200 Ultra Centrifugal Mill RETSCH DR 100 dosing unit Digital control and display panel Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts in various designs Several hoppers and stainless steel parts Further extensive original RETSCH accessories as shown in the pictures Application areas: Laboratory and research Fine grinding Sample preparation Material testing Quality control Research and development Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 dosing unit Nsdpfx Amjzxqhyjtodc 1 × Operating manual ZM 200 1 × Operating manual DR 100 Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts Various hoppers, containers and accessories Further accessories as shown in the pictures Weight approx. 45 kg Condition: Used Signs of wear The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer further questions by telephone.

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers to protect against chips and coolant. Spindle head slide: Cast iron design with hydraulic weight compensation, guided by combined roller/plain bearing guides. Machine bed: Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head arbor 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool holder SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic changeover; speed 22–4,000 1/min. Feed drives: Digital AC individual drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Control system / measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Ndjdpsz Dvycsfx Amtjc Optional: Heidenhain iTNC 530. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Main gearbox / milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides / ball screws pulse central lubrication. Coolant: Internal / external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant / air changeover. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical, via 2 vertical ball screws with separate drives, measuring systems, and CNC axes. Working platform: Moves in the X direction, with CNC control panel; electrically secured door with viewing window. Pick-up station: 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free adjacent slots Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy class 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 positioning slots 22 H7; T-slot spacing 160 mm; centering bushing Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X=5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D touch probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety areas; manually adjustable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Painting: Machine / control cabinet RAL 7035, milling head / spindle head RAL 5021; DD structured paint, semi-gloss, oil and alkali resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on-site; adapter plates for chip / coolant return are not included. Coordinate information: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 650 mm Travel distance Y :530 mm Travel distance Z: 600 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 620 spindle chuck: SK40 spindle revolutions: 9000 rpm Speed range to: 9000 U/min table size X: 850 mm table size Y: 560 mm tool changer: 30 - time Rapid traverse: 30 m/min chip conveyor control Heidenhain - Very good condition - Washdown gun Njdpfx Ao Adz Hhemtjdc - Electronic handwheel - Documentation / manual - Without clamping equipment - Inspection under power possible

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 600 mm Travel distance Y :500 mm Travel distance Z: 540 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: SK40 spindle revolutions: 14000 rpm Speed range to: 14000 U/min tool changer: 24 - time spindle cooling chip conveyor control Heidenhain - DXF file import - Electronic handwheel - Through-spindle coolant (IKZ) - Belt filter - Air cooling through the spindle - Spindle spray ring - Direct measuring system / linear scales - Renishaw laser tool measurement - Renishaw OMP40 3D touch probe - Documentation / manual - Very good condition Njdpe Adz Hnjfx Amtodc - Without the vises shown in the pictures

Condition: used, Year of construction: 2003, 1 used, very well-maintained universal milling machine with 3-axis digital display FAGOR, stepless feed and overarm drive Manufacturer: ARSENAL, Bulgaria Model: FUV 321 M Year of manufacture: 2003 Technical data: Spindles: Spindle mounting, vertical + horizontal ISO 50 Speed range, vertical, stepless 30 – 2000 rpm Speed range, horizontal, stepless 30 – 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Overarm adjustment approx. 600 mm Table swiveling ± 45° max. distance table surface to Ndsdpfsbpmurjx Amtec horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm Table adjustment: Feeds, longitudinal and transverse, stepless 12.5 – 630 mm/min dito, vertical, stepless 5 – 262 mm/min Rapid traverse, longitudinal and transverse 2.5 m/min dito, vertical 1.04 m/min Drive Drive power 7.5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: • 3-axis digital display, manufacturer FAGOR, model NV 300 M • Universal milling head system “HURON”, adjustable manually over 2 levels • Stepless feed via joystick and potentiometer in all 3 axes • Stepless speed for vertical + horizontal via potentiometer with 2 servo drives, manufacturer TELEMECANIQUE, model Altivar 28 • Stepless feed and stepless speed with digital display each • Overarm with motorized drive of the universal milling head • Increased speed range up to 2000 rpm • Automatic machining cycle for the X-axis • Horizontal milling device with 2 opposing bearing blocks • Coolant system • Central lubrication system • Swarf drawer • Machine feet • Machine light • Operating manual • Electrical equipment CE • CE compliant Original new price: 65,800.00 € net The machine can be inspected and demonstrated at our warehouse at any time after prior appointment. Siegfried Volz Werkzeugmaschinen Ruüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, cross adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Accessories / Special features: • 3-axis digital display, manufacturer HEIDENHAIN • Infinitely variable feeds with rapid traverse in the 2nd feed stage • Two working spindles for horizontal and vertical tool holders (vertical milling head does not need to be removed during machining when the horizontal spindle is in use) • Ball screw spindles for the X and Y axes, simultaneous milling in X and Y direction possible • Trapezoidal screw spindle, hardened and ground, for the Z axis (vertical) • All operating elements on one side, in the mobile control panel • Additional manual adjustment of the cross slide increases the working area of the machine, even beyond the table surface • Safety handwheels • Tool holder according to DIN 2080 – steep taper ISO 40 • Automatic central lubrication for speed and feed gears • Vertical milling head with quill, swiveling L+R • Fixed angle table 315 x 710 with 5 slots 12 mm, spacing 63 mm • Tool clamping spindles, horizontal and vertical • Splash guard made of Plexiglas on 3 sides of the horizontal table • Coolant system • CE compliant TOP condition! Siegfried Volz Werkzeugmaschinen Ndsdpfx Ajziutzjmtec Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1994, Deckel FP4 MA Universal Milling Machine Universal Milling Machine – Deckel Type/Model: FP4 MA Condition: Used Year of Manufacture: 1994 Technical Data Travel distances X / Y / Z axis: 485 x 385 x 380 mm Quill travel: approx. 80 mm Vertical milling head, manually adjustable on spindle head: 50 mm Table clamping surface: 460 x 800 mm Table permissible load: approx. 600 kg Spindle speed (18): 63 to 3,150 rpm Tool holder: SK 40 Ndsdpfxoz Ar Tfj Amtoc Operating voltage: 380 V 50/60 Hz Total connected load: 12.5 kVA Feed rate: 2 to 2,000 mm/min Infinitely variable Rapid traverse: 2 m/min Machine dimensions (L x W x H): approx. 200 x 2500 x 2050 mm Machine weight: approx. 2,000 kg Feature: - Deckel Dialog / Contour control Inquiry item: Transport costs in individual offer.

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, quill stroke: 100 mm, For sale is an Emco tool milling machine, model FB-4. The machine was previously used exclusively for inter-company training purposes. Currently, two identical Emco FB-4 machines are still in stock. Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Nedpjyvra Ijfx Amtodc Year of manufacture: 2005 Control: Heidenhain ND-750 display Technical parameters: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Tool clamping: hydraulic • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle speed: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard cabin (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: ..1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Counter bearing for horizontal machining • Shaft for horizontal machining • Table enclosure (currently removed) • 10x SK-40 tool holders

Condition: good (used), Year of construction: 1992, Table surface area: 1850 x 710 mm Permissible table load: 3000 kg Travel ranges: Longitudinal, automatic (X): 1600 mm Lateral, automatic (Y): 710 mm Vertical, automatic (Z): 850 mm Spindle mounting: SK 50 Speed range: 20 - 2500 RPM Main motor power, AC: 15 kW Transport dimensions L x W x H: 3650 x 2300 x 2700 mm Weight: 9400 kg Accessories / Special features: • CNC path control system, manufacturer HEIDENHAIN, model TNC 360 with 3 scales • Programming language "Plain text dialog" and DIN-ISO • Electronic handwheel HEIDENHAIN HR 330 with magnetic holder • 3D probing system HEIDENHAIN TS 120 • Main spindle compact unit RAC 3 • Control system prepared for 4th axis • Universal milling head system "HURON" with 2 levels, gears run in an oil bath • Hydraulic tool clamping • Coolant system • Central lubrication with interval • German electrical system, drives INDRAMAT • Operator control panel • Operating manual Ndsdpfx Ajttamksmtjc - Newly refurbished milling head, partially overhauled with new gears, seals and bearings - Oil dispenser for central lubrication renewed Operating hours: 10,032 Program runs: 3,288 Spindle ON: 2,569 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany