CNC turning and milling centers for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

CNC Lathe FUJI ANW 4100 mit Gantry Loader

Großhansdorf, GermanyGermany dealership location
6490 km
2006
used
control Fanuc 18Oi-TB x-axis 275 mm z-axis 390 mm 33 U/min spindle speed: max. 3000 U/min spindle motor 18,5/22 kW rapid traverse x/z-Achse 24 m/min dimension of workpiece max. 300 x 120 mm tool turret with - 12 work positions Bfgmpg3eze 3-jaw chuck SMW 250 nm max. 5000 U/min dimensions of the machine ca. 3,570 x 3,135 m weight 9,5 t There are 2 identical machines of this type available! (Price per machine!) The Fannuc 180 i-TB controller can be operated via touch screen. Construction:... more
4

CNC lathe Traub TNA 500

Düsseldorf, GermanyGermany
6387 km
1999
good (used)
1 bum. CNC lathe, Fabr. Traub, Type TNA 500, Control System TX8F Bffzygaysk more
6
Dear Ladies and Gentlemen, we look forward presenting you this machine. The machine is located at our facility and available shortly. Datasheet: Arbeitsbereich / Performance: Schwingen über Sattel / Swing over Saddle: Ø 400 mm Distanz zwischen Spindeln / Distanz between noses: 960 mm Max Drehdurchmesser / Max turning dia.: Ø 210 mm Max Drehlänge / Max turning length: 130 mm Verfahrwege / Travels: X-Achse / X-Axis: XA, XB: 205 (+175 bis -30) mm Z-Achse / Z-Axis: ZA, ZB:... more
5
turning diameter:610 mm turning length:1105 mm control: 640 F9ccazqd main spindle speeds::3.500 U/min Sub spindle speed:3.500 U/min milling spindle speed:6.000 U/min total power requirement:50 kW weight of the machine ca.:9,5 t spindle hollow:70 mm travel -x axis:580 mm travel -z axis:1137 mm travel -y axis:210 mm b-axis:225 ° feed in x/y/z - axis:8 m/min tool taper:KM 63 Working spindel hours:3200 h Number of working hours:9300 h Working spindel hours on new main spindel:ca. 800 h chip conv... more
5
turning diameter:370 mm turning length:450 mm control: Travel turret No.1 (milling spindle) x/y/z:380 / +- 105 / 454 mm Swivel range Turret No. 1 (milling spindle) B-axis:+-120 ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/50 m/min RPM milling spindle:20.000 1/min power capacity - milling spindle:7,5 / 5,5 kW Torque of milling spindle:22 / 30 Nm tool taper milling spindle:CAPTO C5 Tool magazine for milling spindle (turret 1):38 Spindle 1 RPM:5.500 1/min Spindle 1 Power:11 / 7,5 k... more
10

CNC Turning- and Milling Center BOLEY BC 32

Mülheim an der Ruhr, GermanyGermany dealership location
6382 km
2002
used
turning diameter 32 mm turning length 80 mm weight of the machine ca. 2 t The machine is in a well-maintained condition. The revolver was realigned and measured about 4 months ago by a technician. Nnobl The delivery includes all matching tool holders for the Revolver equipment, as well as a few special holders. Operating hours amount to 62,041 h. Of which at least 15,000 h "power on". Technical details will be completed soon! more
5

CNC Turning- and Milling Center NAKAMURA TOME WT 250

St. Ingbert, GermanyGermany dealership location
6494 km
2001
used
turning diameter:250 mm turning length:435 mm control: x-axis:x1 195 mm z-axis:z1 600 mm Ja8bm7aos y-axis:+- 41 mm c-axis:C1 360 unendlich, direkt x-axis:x2 195 mm z-axis:z2 600 mm c-axis:C2 360 unendlich, direkt spindle motor:links 15 kW spindle motor:rechts 7,5 kW speeds:4500 U/min dimensions of the machine ca.:6000 x 2700 mm weight of the machine ca.:6 t total power requirement: kW C axis (0.001 level) with spindle brake on both spindles, drive for driven tools on two revolvers, automati... more
5

CNC Turning Center INDEX R 300

Wiesbaden, GermanyGermany
6527 km
2013
good condition (used)
Main spindle: Spindle motor AC 47/52 kW torque 450/690 Nm Max. spindle speed 3.500 rpm Bar capacity 102 mm Spindle nose ISO702/1 size 8 Diameter spindle bearing 140 mm C-axis, 0.001° Bfeo7srgwt movements Z-axis 610 mm rapid Z-axis 40 m/min sub spindle: Spindle motor AC 47/52 kW torque 450/690 Nm Max. spindle speed 3.500 rpm Bar working capacity 102 mm C-axis, 0.001° movements Z-axis 610 mm movements X-axis 780 mm rapids X-/Z-axis 40 m/min Tool turret 1: Milling spindle A... more
7

CNC turning and milling center Doosan Puma TT 1500 SY

Umkirch , GermanyGermany dealership location
6594 km
2006
good (used)
Manufacturer: Doosan Type: Puma TT 1500 SY Built: 2006. Controls: Fanuc 18i-Tb Travel: x-axis: 165 mm y-axis: 100 mm Bbakds0y z-axis: 470 mm Z2 axis: 490 mm X2 axis: 190 mm C-axis: 36 (0.001) Number of powered tools: 6 Room requirement Machine: approx. 3.2m x 2.3m x 2.2m (high) Machine weight: 7800 kg Bar loader: Iemca Boss 55 E Room requirement bar loader: 4.2 x 1 x 1.25 m Weight bar loader: 800 kg User manuals and electrical manuals are provided. In addition, variou... more
5
Make: Carnaghi Model: AC20TM/1600 Type: Lathe S/N: 3609 Year: 2003 Location: Plan-les-Ouates (GE), Switzerland PIETRO CARNAGHI AC20TM/1600, CNC TOUR VERTICAL/ CNC KARUSSELLDREHMASCHINE/VERT.TURNING & MILLING LATHE; 2x Pallets 1600mm; max diam. 2000mm; max. Turning Height 1.000 mm; X=1.210, Z= 1.000 mm; Yr7aew C-Axis = 360°; 120 Pos. ATC ; 12 Pos. Head Changer; Table/Tisch n= 1- 375; Spindle n= 10-3.000; Motor 60 kW + Motor 37/40 kW; Feeds 0-1.500 mm/min, C=... more


CNC turnin...
daily

New machines via email!

Stay updated!
5
max. turning diameter:200 mm turning length:635 mm control:SIEMENS 840D swing dia.:250 mm centre distance:800 mm bar material dia.:65 mm spindle turning speed - stepless:S1 5.000 / S2 5.000 1/min Turret No.1 stations / rotary tools:12/12 VDI 30 Turret No.2 stations / rotary tools:12/12 VDI 30 Driven Tools:4000 1/min Main spindle capacity:26 / 21 kW subspindle power:26 / 21 kW Jbqfqfxn work piece power:8,4 / 11,7 kW total power requirement:75 kVA weight of the machine ca.:10 t dimensions ... more
1

Guild master GMX250 S linear

Sonnenbuehl, GermanyGermany
6669 km
2007
excellent (used)
GMX 250S linear Built in 2007 Control Heidenhain IT Turning length 1185 mm Turning diameter 400 mm Main spindle max.5000 rpm Counter spindle max 5000 rpm Pass-through both machines 65 mm 36 tools on B-axis with HSK63 mount B-axis with internal cooling 12 tool slots on turret with VDI40 holder Part discharge with conveyor belt Bar loader Machine has been constantly serviced, can be visited under power! Bfehseqkf7 more
6

CNC Turning- and Milling Center STAMA MC 726/MT

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6717 km
2008
used
turning diameter mm turning length mm control ----- WORKING RANGE -CUBIC- - number of processing axes (excl parallel axes) 11 - .. among of them simultaneous CNC axes 5 - X-axis travel 500 mm - Y-axis travel 380 mm Daoeztht - Z-axis travel 360 mm - rotating range C-axis from 0 ° - rotating range C-axis up to 360 ° TABLE - rotation axis: C - - mode of operation: automatic MILLING SPIN... more
4

CNC Turning Center MAZAK MULTIPLEX W-200 Y

Wiesbaden, GermanyGermany
6527 km
2017
good condition (used)
Mazatrol SmoothG control Max. turning diameter 320 mm Max. bar working capacity 65 mm Left and right spindle max. speed 5.000 rpm Bfejtdquux C-axis 0.0001° 2 x 12 driven tool stations Driven tools 5,5 kW, max. speed 5.000 rpm Gantry loader GL100 2Pc conveyor/D3-hand cylindic + polar interpolation (EIA) borring cycle air blow left and right spindle automatic tooleye left and right high pressure coolant, internal, 2 x 15 bar coolant pumps more
3

CNC turning and milling center MAZAK Integrex e-500H

Umkirch , GermanyGermany dealership location
6594 km
2007
excellent (used)
Manufacturer: MAZAK Jvchra Type: Integrex e-500H Built: 2007 Control: Mazatrol PC Fusion 640 MT Turning diameter: max.820 mm Turning length: 3048 mm Travel X-axis: 870 Y-axis: 500 Z-axis: 3122 mm Rapid speed X/Y/Z: 40000/40000/40000 mm/min Spindle speed: 3300 rpm Spindle power: 30 kW Milling spindle speed: 10000 rpm Number of tool magazines: 40 Diameter bezel: 380 mm Space requirement: 6.4 x 7.9 x 3.6 m Chip conveyor satislating. more
5
Lathe milling center Takisawa EX 910, Bauj 2008 Control Fanuc 18i TB Motor Main spindle 22 kW Counter spindle 18.5 kW Travel Y= (+80 / -80) Max diameter 380mm turning length 660mmm Rod: 77mm and 52mm Bfgoffa9cz Accessories : AGW more
5
turning diameter:600 mm turning length:1020 mm control:FANUC 18 iT-B bar material dia.:76 mm chucking diameter:315 mm Yry0ik spindle drive:26/22 kW turning speeds:3.500 1/min z-axis:1095 mm b-axis:240 mm c-axis:360.000 Grad y-axis:+-80 mm tools in tool magazin:40 Stück total power requirement:93 kW weight of the machine ca.:12,5 t dimensions of the machine ca.:5,8 x 2,3 x 2,7 m 5 Axis turning / milling center with 1 turret, 2 spindles and milling head 1 pcs. turret with 12 tool places intern... more
4
1 used CNC lathe INDEX GE 42 Project No.170370 partially-overtaken !! completely checked !! Machine INDEX GE 42 Built in 1991 Control C200 S3T Main spindle D=42 mm 15 KW ARS 2.5 colstress holder for pressure clamping pliers Counter-synchronous spindle D=42 mm Clamping recording 0fzdfmte Back editing 3 tool holders Revolver 1 14 fold VDI 25 X, Z, 150 mm 400 mm Stinging sled yes Part removal port... more
5

CNC Turning- and Milling Center WFL M30 G X 1000

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6717 km
1996
used
turning diameter 300 mm turning length 1050 mm control ----- BASIC FUNCTIONS - design principle: inclined bed - number of spindles 2 - number of x/z slides 2 - number of turrets 2 - live positions: yes - number of c-axes 2 - number of y-axes 1 - number of b-axes 1 WORKING RANGE TURNING - swing diameter (max) 520 mm - turning diameter (max) 300 mm - worpiece length max. 1050... more
3
Yc7jlccy CNC Multitasking Lathe NAKAMURA SUPER NTX-S Mfg. year 2007 S/No. V300901 Fanuc 16i-TB Luckbei-Dialog System Supercap Max. turning diameter - Upper turret 390 mm - Lower turret 300 mm Max. turning length 1.100 mm Max. bar working capacity 65 mm Milling spindle AC 18.5/11 kW Milling spindle Max. speed 12.000 rpm Capto C6 Servo controlled B-Axis, 230° Y-Axis 160 mm ATC with 40 tools Main and sub spindle AC 22/18,5 kW Main and sub spindle max. speed 4.500 rpm 12/24-stat... more
12

Turning-milling center Index G300-L

More Index G 300
Fellbach, GermanyGermany dealership location
6655 km
1998
excellent (used)
used index G300-L Bfgc32dnja Control Siemens 840C Revolver 1 X/Y/B/Z VDI30 Revolver 2 X/Z VDI30 Main spindle D=90 mm Counter spindle D=90 mm Unimag Interface Portal removal device High-pressure pump with belt filter Accessories Tool holder (by arrangement) Conveyor The machine was tested by an index technician more
4

Lathe Benzinger KNC-5T

Illingen, GermanyGermany dealership location
6622 km
1997
good (used)
Rotary milling Center for making ring. Fully equipped. Well-kept condition. BJ.: 1996 + 1997 Control: Sinumerik 840C. 7tvocr0pj We have 2 machines of this type. Once with spindle and one with 14-way Scheibenrvolver. See technical data in pdf more
5
turning diameter:300 / 200 mm turning length:2 x 275 / 775 mm control: x-axis:X1, X2 X3: 207,5 mm z-axis:Z1, Z2: 300 / Z3 800 mm y-axis:Y1, Y2: 60 mm spindle distance:1.070 mm Main spindle capacity:15/11 kW subspindle power:15/11 kW main-spindle speed:5.000 1/min subspindle speed:6.000 1/min toolpiece turning speed range:6.000 1/min dimensions of the machine ca.:3,9 x 2,4 x 2,35 m Sdpjcgy turret (x-stations):3 x 12 pos. work piece power:3,7 kW weight of the machine ca.:10 t total power require... more
7
1 used CNC rotary centre TRAUB TNC 65 DGY Built: 1996 Control: TX 8 F Main spindle D=65mm, 18.5 KW, 230 Nm, A6 C-axis, 100 Nm collet recording Hainbuch Counter spindle D=65mm, 18.5 KW, 230 Nm, A6 C-axis, 100 Nm Revolver 1 10 Stations VDI 30 Drive device for rotating tools, 4,000 rpm X=140mm Y=70 Z=450 Revolver 2 10 Stations VDI 30 Drive device for rotating tools, 4,000 rpm X=140mm ... more
4

CNC Turning- and Milling Center MAIER MLK 36D

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6717 km
2016
used
turning diameter 36 mm turning length mm control ----- BASIC FUNCTIONS - number of spindles 3 WORKING RANGE TURNING - turning diameter (max) 36 mm Bfgohrkmdb MAIN SPINDLE - spindle revolutions (max) 6000 /min - spindle positioning 5 ° - c-axis: yes COUNTER SPINDLE - spindle revolutions (max) 6000 /min - spindle positioning 5 ° - c-axis: yes ELECTRICAL SPECIFICATIONS - total power consu... more
3
Lagernummer 1105-02694 Maschinenart CNC Dreh- und Fräszentrum Fabrikat DMG MORI Typ CLX 350 V 3 Baujahr 2017 Steuerungsart CNC Lagerort FRANKREICH Ursprungsland - Lieferzeit nach Absprache Zsngxwse Frachtbasis ab Standort Technische Details Drehdurchmesser max. 260 mm Drehlänge 530 mm Steuerung Sinumerik 840 SLIMLINE Siemens Umlaufdurchmesser über Bett 330 mm Standard-Drehdurchmesser 280 mm Max. Drehzahl 5.000 min/-1 Antriebsleistung - Hauptspindel 11/13 kW ... more
1
Takisawa Type TS-4000YS with Fanuc 32i-B control incl. Takisawa Tiwap Used, run in 1-shift (NEW PRICE: 234.000,- Euro) Basic equipment of the machine: - 32 bit FANUC CNC control with 10.4" color LCD - Counter spindle - Driven tools and 2 x C axis - 12-speed turret with direct holder - Drive power main spindle 15/22 kW - Spindle speed 40 - 4,200 min-1 - Spindle nose A2- 8 - Rod passage 82 mm - Drive power counter spindle 7.5/11 kW - Spindle speed 60 - 6,000 rpm - Spindle nose F 140... more
0
turning diameter over bed: 300 mm turning dia. over face-slide: mm turning length: 300 mm x-axis: 170 mm z-axis: 335 mm turning diameter: max. 300 mm Cutting Time: 34 h control: Siemens 810D range of revolution per miute: 6000 U/min tool taper: BMT-55 rapid traverse X-axis: 36 m/min rapid traverse Z-axis: 36 m/min spindle bore: 45 mm spindle nose: A2-5 tool turret - number of stations: 12 Plätze/places tailstock taper MT: MK 4 quill stroke: 80 mm drive power: 5,5 / 7,0 kW Nnpwf total power requ... more
5
max. turning diameter:100 mm turning length:345 mm control:SIEMENS 840D swing dia.:145 mm centre distance:580 mm bar material dia.:65 mm spindle turning speed - stepless:S1 5.500 / S2 5.500 1/min Turret No.1 stations / rotary tools:12/12 VDI 30 Turret No.2 stations / rotary tools:12/12 VDI 30 Driven Tools:30 - 6.000 1/min main gear-box motor:20 / 15 kW subspindle power:20 / 15 kW work piece power:3,8 / 2,1 kW total power requirement:65 kVA weight of the machine ca.:5,5 t Nltvr dimensions... more
5
Miyano ABX - 64THY Two top-facing turrets on the left and right with Y-axis and a third turret at the bottom with Y-axis provide access to both spindles and allow ideal process splitting and flexible tool placement. Special features: • 12 axes • Highest precision in combination with strength and stability • 3 turrets • Y-axis on all 3 turrets • 40 Nm torque on the driven tools • Simultaneous processing • Processing of complex parts Technical data Feature ABX-64THY Max. rod diameter... more
3
turning diameter 250 mm turning length mm Be7qqgapej control ----- BASIC FUNCTIONS - number of spindles 2 - number of turrets 2 - live positions: yes - number of c-axes 2 - number of y-axes 1 WORKING RANGE TURNING - turning diameter (max) 250 mm - bar diameter (max) 65 mm MAIN SPINDLE - drive power S6 40% 15 kW - drive power 15 kW - c-axis: yes COUNTER SPINDLE - c-axis: ... more
13

CNC lathe DMG Gildemeister Twin 65 RG 2

Schloß Holte.Stukenbrock, GermanyGermany
6468 km
2010
excellent (used)
Manufacturer: Gildemeister Type: Twin 65 with counter-spindle & automation. Built: 2010 Control: Siemens 840D powerline J9g2xatd Orbital diameter ü. Bed: 250 mm Plan path sleigh 1:300 mm Longitudinal sledge 1:650 mm Vertical path Y-axis: ± 40 Plan Way Sleigh 2:180mm Longitudinal Sleigh 2:650mm Stand passage max: ø 65 Propulsion powy:40/100% 25/37 KW Speed range from – to: 20-5000 U/min Weight about: 10,000 kg Facilities: Axes: 9 2x Star r... more
5

CNC Turning- and Milling Center WFL M30

Staufenberg, GermanyGermany dealership location
6532 km
1998
used
turning diameter:520 mm 7u0gvt70v turning length:1050 mm control:840C total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 Revolvers 12 fach, driven tools HSK 50 A, Tool changer milling spindle 96 pos., Chip conveyor Coolant unit more
7
WF'l M 30-G turning and milling centre with short loader. Control: Sinumerik 840 Accessories: Chip conveyor, bezel and coolant system. Bfawnfcgsh Pre-info. Machine is available from KW 36. more
5

CNC Lathe GILDEMEISTER CTX ALPHA 500 V6

Karlsbad, GermanyGermany dealership location
6602 km
2009
used
turning diameter:200 mm turning length:520 mm control:HEIDENHAIN DIN plus, Turn plus swing diameter max. over bed cover:500 mm Bffgj7jvrc cross movement:190 mm spindle diameter in front bearing:100 mm spindle bore:66 mm turret (x-stations):12 x VDI 30 work piece power:5,4 kW turning speed range:6000 1/min subspindle speed:6000 1/min rapid traverse:X/ Y/Z 30/22,5/30 m/min total connected load:30 kVA weight of the machine ca.:4,7 t dimensions of the machine ca.:4,0 x 3,0 x 2,2 m main spindle I... more
0
very quick automatic lathe, machining with 3 tools at the same time high dynamic drives Ctyrlync turret changing time cut-to-cut 0,55 sec. parts discharge without grip to discharge belt, without loading magazin turning diameter: 36 mm turning length: 100 mm control: Traub TX 8i bar passage main spindle: 36 mm max. speed: 6300 rpm bar passage counter spindle: 36 mm max. speed: 6300 rpm turret 1 with driving attachment 12 stations front attachment: tool taper 5 pieces backworking ... more
4

CNC Turning- and Milling Center GILDEMEISTER CTX 420 LINEAR

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6717 km
2004
used
turning diameter 324 mm turning length 600 mm control ----- BASIC FUNCTIONS - number of spindles 2 - number of turrets 1 - live positions: yes - number of c-axes 1 - number of y-axes 1 WORKING RANGE TURNING - swing diameter (max) 680 mm - turning diameter (max) 324 mm - bar diameter (max) 65 mm - worpiece length max. 600 mm MAIN SPINDLE - spindle revolutions (max) 5000 /min Bfgmgskbuh... more
7
Manufacturer: Gildemeister Type: GMX 200 linear Built: 2003 Control: Siemens 840D Powerline Orbit diameter via flat slide: 560 mm Turning diameter: 560 mm Longitudinal distance: 1070 mm Power: 25/37 kW Speed range main spindle from - to: 5000 rpm Speed range rotary/milling spindle: 12,000 rpm Tool magazine: 46-fold Rod passage: 68 mm Facilities: Bp7e29di Tool carrier above: - With rotary and milling spindle as motor spindle, ... more
3
CNC turning and milling center Manufacturer: Doosan Machine Model : Puma 2500 LSY Control: Fanuc 18i Built: 2007 Bfeyj9snwd Technical data Rod passage (mm): 76 Travel X-axis (mm): 250 Y-axis (mm): +/- 50 Z-axis (mm): 580 B-axis (mm): 580 Drive power (kW) 22 / 15 Number of revolvers: 1 Number of tool slots: 12 Tools powered by factory seats:12 Features - Part catchers - Spher conveyors - Probe - IKZ - Knoll cooling system Weight (kg): approx. 5,500 more
7
Rotary milling center Gildemeister GMX 200 linear Control: Siemens 840D - Powerline Running hours: 13,000h Technical data: Turning diameter: 520mm Turning length: 1.175mm Main spindle: Speed: 0-5,000 min Power: 28/47kW Chuck diameter: 250-315mm Rod passage: 65mm Counter spindle: Speed: 0-5,000 min Power: 28/47kW Chuck diameter: 250-315mm Rod passage: 65mm Rotary and milling spindle: Speed: 0-12,000 min Power: 22kW Bdqjewexxy Tool holder: HSK 63 Number of magazine place... more
11

Nakamura-Tome TW20 GR-203

Sevilla, SpainSpain
6087 km
2003
excellent (used)
Model: TW20 GR-203 Gantry Loader Year: 2002 Bfdm7gleup Workpiece diameter 130 mm Workpiece lenght 85 mm Fanuc 18iTB Control Spindle motor left 15/11 kw max spindle speed 4500 rpm Spindle motor right 15/11 kw max. spindle speed 5000 rpm Rapids X1/X2 16 m/min Rapids Z1/Z2 30 m/min 2 x C-axis 2 x 16 station turret, all stations for driven tools 2 x autom. Toolsetter Renishaw Swarf Conveyor 2 x High pressure pumps 40 bar (Kowap) Workpiece stocker Gantry Load GR-203 3 kg x 2 Luk-Bei Pr... more
7

CNC Lathe Milling Center TRAUB TND 400

More Traub Tnd 400
Kornwestheim, GermanyGermany dealership location
6647 km
1996
good (used)
Beetvkgasr CNC Lathe and Milling Centre TRAUB TND400 incl. Handling-System built 1996 good condition under power in Production available September 2019 more
4

Turning milling centrum Haas Automation DS30SSY

Szekesfehervar, HungaryHungary
7343 km
2015
good condition (used)
CNC lathe with two spindles with Y-axis, travel of max. 406 x 584 mm, swing diameter of 806 mm, travel of the Y-axis ± 50.8 mm. 15-inch LCD color screen, memory lock key-operated switch, USB port. Main spindle: Vector drive (22.4 kW), 4800 rpm, A2-6 spindle, 8.3 "chuck (210 mm). Subspindle: Vector drive (14.9 kW), 4800 rpm, A2-5 spindle, 8.3 "chuck (210 mm). Hybrid revolver with 24 tool stations (12 VDI / 12 BOT) Powered tools: 6000 min-1 Driven tools with C-axis, requires VDI turret C... more
11
agernummer 1105-02686 Maschinenart CNC Drehmaschine Fabrikat MAZAK Typ QUICK TURN SMART 200M Baujahr 2011 Steuerungsart CNC Lagerort FRANKREICH Ursprungsland Japan Bfeqp8h7p3 Lieferzeit SOFORT Frachtbasis EX WORK Technische Details Drehdurchmesser 360 mm Drehlänge 532 mm Steuerung MAZATROL SMART Maschinengewicht ca. 5,5 t Zusatzinformationen CNC Steuerung Mazatrol SMART CNC REITSTOCK C-Achse an Hauptspindel, Spindelorientierung 12-fach Revolver, ang... more
3
OSP E-100L Swing diameter over bed 550 mm Bfevxelrvn Swing diameter over saddle 530 mm Distance between centres 1440 mm max. turning diameter 550 mm Y axis +/- 80 mm C axis 360 x 0,001 Grad B axis 210 x 1 Grad Main / subspindle Chuck diameter 250 / 170 mm Turret VDI 40 12 stations ATC 44 stations Taper HSK 63-A Machine weight 12500 kg Chip conveyor, RS232 interface, touch setter more
12

CNC Lathe Takamaz XW-30PLUS

Brno, Czech RepublicCzech Republic
7108 km
2016
good (used)
Control system: Mitsubishi M70V Travels: X-axis: 160 mm Z-axis: 230 mm Distance between the spindles: 480 mm X / Z axis guidance: linear Spindle bearing diameter: 60 mm Spindle cone: A2-3 Max. Spindle size: 100 mm Distance between spindle and ground: 900 mm Max. Workpiece diameter: 30 mm Max. Workpiece weight: 0.3 kg Z-axis rapid traverse: 100 m / min Y-axis rapid traverse: 150 m / min Maximum turning length (Z-axis): 50 mm Turning diameter over bed (max): 5... more
10
turning diameter 450 mm turning length 1200 mm control Siemens 840 C swing over bed 540 mm swing diameter over slide rest 450 mm spindle bore 77 mm Bsqtdvrq spindle turning speed range 10 - 3150 U/min c-axis 0,001 °/deg. y-axis 160 (+/- 80) mm b-axis 180 (+/- 90) °/deg. x-travel 380 mm z-travel 2031 mm milling head speed 1-3000 U/min hobbing length 2031 mm weight of the machine ca. 10,5 t dimensions of the machine ca. 6248 x 3302x 2700 mm * Werkzeugwechsler mit 24 Werkzeugen * Spindelinnenk... more
5
CNC rotary and milling censing SCHAUBLIN - 65 TM-6 Y - main and counter spindle - tool drive - C-axis - Y-axis - 2 turrets - bar loading magazine Technical details Turning diameter max. 250 mm rotational length max. 500 mm Control Fanuc 18i main spindle spindle speed max. 4,000 min/-1 Drive power - main spindle 15 / 18.5 kW Max torque 164 Nm C-axis 0.001 ° max. rod diameter 65 mm usable Rod diameter - mm feed diameter Standard 200 mm spindle nose A2-6 counter spindle spindle speed max. 4,000 m... more
6
turning diameter 540 mm turning length 1000 mm Benvepitf2 control SIN880T power capacity 37,00 kW turning speeds 8 - 3148 U/min swing diameter over slide rest 450 mm greates pass round over bed 540 mm tool taper SK 40 DIN 69871-A40 tool magazin: 24-fach spindle diameter in front bearing 160 mm spindle bore 115 mm z-axis 1411 mm x-axis 380 mm e-axis 560 mm max. torque on the spindle max. 1520 feed range 0 - 10.000 mm/min rapid traverse 15 m/min power feed longitudinal 16.500 N power feed pla... more
9
turning diameter 600 mm turning length 1.057 mm control MSX - 711 MAPPS II swing diameter over support 600 mm distance between spindles 1.255 mm max. bar capacity 52 mm Main drive 2 turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 223 Nm no. of turning speeds 2 spindle nose JIS A2-5 spindle bearing diameter 100 mm spindle bore 61 mm usable bar diameter ( max. 52 ) mm C-Axis 0,0001 ° Milling Spindle: Speed range Tool Spindle max. 12... more


CNC turnin...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.