Used Turning automatic lathes for sale
Your detected location:
United States
Metal processing machinery
Lathes
Turning automatic lathes
3
used. Turning Holder VDI40
Plan
Compatible Mazak:
Mazak QT/QTN 100 M/MY (VDI)
Cdjqakkkgk
Mazak OT/QTN 100 MS/MSY (VDI)
Mazak QT/QTN 200, 250 M/MY (16D, VDI)
Mazak QT/QTN 200, 250 MS/ MSY (16D, VDI)
Mazak Super Quick Turn 100 M/ MY
Mazak Super Quick Turn 100 MS/ MSY
Mazak Super Quick Turn 200, 250 M/MY (16D)
Mazak Super Quick Turn 200, 250 MS/ MSY (16D)
Mazak Super Quadrex 200, 250 M (16D)
Axis: 7
Control Fanuc 31 i
main spindle:
max. rod diameter 60 mm
max. turning speeds 5000 min/-1
spindle motor 7,5/5,5 kW
sub spindle:
max. turning diameter 42 mm
max. turning speeds 5000 min/-1
spindle motor 3,7/2,2 kW
Axis:
max speed (Z4) 15 m/min
max. acceleration 5 m/s2
travel X1 / X2 / X3 60 mm
travel X4 130 mm
travel Z2 80 mm
tavel Z3 80 mm
travel Z4 340 mm
Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N
Tool holder slide 1:
fixed tools 1
Tool holder slide 2:
fixed tools...
13
Offered
CNC longshoreman.
With FEDEK 3 meter loading magazine.
X1/X2-axis travel 185/290mm 185/290mm
X/Y/Z-axis rapid travel speed 30m/min 30m/min
X1/X2-axis motor 1.3kw/0.85kw 1.3kw/0.85kw
Y/Z1/Z2-axis travel 490/165/285mm 490/165/285mm
Y/Z1/Z2-axis motor 0.85kw 0.85kw
Min. input unit 0.001mm
Zcapjtid
Max. speed of spindle St:4500rpm
Center height 1032
Spindle collet TRB-25
Min. input unit 0.001mm 0.001mm
No. of O.D. tools 6
O.D. tool size □12
No. of I.D. tools 5
I.D. tool size ∅25
Spindle moto...
1
Spindle passage 20mm,
tapping spindle,
Dm2mu7zok
loading magazine
turning diameter over bed 32 mm
spindle passage 36 mm
turning length 300 mm
turning speeds 300-7000 U/min
c-axis 0,001 °
gripping station 32
turning length 80 mm
turning speeds 7000 U/min
positive location each 15 Grad
number of tools 4+16 total
number of milling stations 3+8
control Fanuc 18i-TB
Number of axles 5 St.
chip conveyor ja/yes kW
Number of working hours 65405 h
spindle hours 27131 h
Ebimgxb
total power requirement 5,5 / 7,5 kW
weight of the machine ca. 3,2 t
dimensions of the mac...
4
turning diameter over bed 50 mm
spindle passage 26 mm
turning length 275 mm
total power requirement 12 kW
Cbwj9hz8
weight of the machine ca. 4500 kg
CNC-Sliding Headstock Lathe, Opposite Headstock
13
CNC long lathe operator
Manufacturer Manurhin KMX
Type : Swing with 7- axes
Year of manufacture : 2004
Control : FANUC
Storage place : Sweden
Technical data
- maxi bar diameter : 26 [mm]
- spindle power : 7.5 [kW]
- spindle speed : 8000 [rpm].
- headstock stroke : 250 [mm]
- maxi. Counter spindle diameter : 26 [mm]
- counter spindle power : 5.5 [kW]
C7pxksr
- counter spindle speed : 8000 [rpm].
- dimensions : 2840 x 1200 x 1920 [mm]
- weight : 4250 [kg]
- number of axes 7
- C - axis on main spi...
10
turning diameter 16 mm
spindle passage 16 mm
turning length 160 mm
Bwzxy0bcs
control GE FANUC Series 18 i-T
spindle turning speed range 8000 U/min
rapid traverse 30 m/min
total power requirement 2,2 kW
weight of the machine ca. 2,1 t
Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 -
26 mm and bar lengths 1500 - 3210 mm); chip conveyor,
coolant
10
turning diameter over bed 32 mm
spindle passage 32 mm
Zxogk
turning length 200 mm
total power requirement kW
weight of the machine ca. 3800 kg
dimensions of the machine ca. m
3
Spindle diameter 20mm,
tapping spindle,
loading magazine,
Hcmcsh
new screen and keyboard,
7
Escomatic D2 with very rare roller unit and hood.
The machine is in good used condition and is being sold as seen without any guarantee/warranty.
You are welcome to arrange a viewing appointment.
Cdjnyzqd80
5
CNC sliding headstock automatic lathe with B-axis and high pressure system
Manufacturer: Citizen
Type: L20 VIII
Year of manufacture: 2007
0cg7s
Technical data:
Turning diameter: max 20mm
turning length: max 200mm
spindle speed: 10.000 rpm
Drilling diameter: max 10mm
Counter spindle
diameter: max. 20mm
spindle speed 8.000 rpm
number of tools: 21
B-axis (manual)
Bar feeder IEMCA Boss 338-HD 32L
Machine weight: 2150 kg
Tools:
4 pieces driven tools
2 pieces turning chisels
1 piece parting off...
10
control FANUC 18i-TA
- - - - - - - - -
- - - - - - - - -
CNC AUTOMATIC LATHE | STAR - SA-12 with bar feeder
The machine is in a well-maintained condition.
Please refer to further technical details in the attachement of the offer.
C7pmr2j
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: SA 12 | SA12
max. machining diameter 32 mm
Btxbzpk3cj
max. machining length ca. +/- 100 mm
Control TX 8i
Main spindle:
turning speed range - main spindle max. 8.000 min/-1
power capacity - main spindel 10,7 / 6,7 kW
max. Torque 32 / 21 Nm
max. usable bar diameter 32 mm
Subspindle:
Spindle speed range subspindle max. 8.000 min/-1
power capacity - Sub spindle 10,7 / 6,7 kW
max. Torque 32 / 21 Nm
max. usable bar diameter 32 mm
Traverses Subspindle Z4: 250 mm
turret:
number of toolpositions 12 pos.
Shank ...
7
turning length 120 mm
diameter 17 mm
Control Fanuc
main spindle:
max. turning speeds 8000 min/-1
sub spindle:
max. turning speeds 2600 min/-1
Number of tools 9 St.
In our estimation, the machine is in good condition
and can be viewed live by appointment.
Accesories:
Tis07jl7
- bar feeder
*** Changes and errors in the technical data and information as well
Subject to prior sale!***
4
Fanuc control system,
loading magazine FMB,
Qqwdx
Pick-up spindle
6
spindle passage: 23 mm
z-axis: 150 mm
turning length: 150 mm
stroke: x+z Achse / Axis/eje/eixo/os = 30 mm
facing movement (x-axis): 30 mm
7nkvqsbw7
longitudinal traverse (z-axis): 30 mm
control: Num 760T
spindle turning speed - continuous: 0-3000 / 0-6000 U/min
feed speed: x/y: 5 mm/min
feed speed: z: 10 mm/min
tool turret: 2 Stück/pcs mit je/each 6 tools
operating pressure: max. 45 bar
total power requirement: 8,0 kW
weight of the machine ca.: 2,2 t
dimension machine xH: 2,45x1,3x2,2 m
dimensi...
6
turning diameter over bed / mm
spindle passage 32 mm
turning length / mm
-----
BASIC FUNCTIONS
- number of spindles 2
- - counter spindle: yes
- number of turrets 2
- spdl. indexing device: yes
- live positions: yes
- number of c-axes 2
- number of y-axes 3
WORKING RANGE TURNING
- bar diameter (max) 32 mm
MAIN SPINDLE
Bjqm3qyvqf
- spindle revolutions (max) 7000 /min
- drive power 5.5 kW
- c-axis: yes
COUNTER SPINDLE
- spindle revolutions (max) ...
4
Catalog No. : 5731
Type: ML26H
Producer: HANWHA
Made in: 2001
Characteristic:
Control system: FANUC 18i-T
Max. bar diameter: 26 mm
Min. bar diameter: 3 mm
Maximum bar length: 3000 mm
Number of synchronous axles: 6 pcs
Main spindle stroke: 210 mm
Diameter of the spindle bore: 26 mm
Maximum drilling diameter: 10 mm
Maximum spindle speed: 8000 1/min
Maximum power of the main spindle: 3.7/5.5 kW
Length: 2000 mm
Width: 1200 mm
Height: 1750 mm
B2pudsbter
Weight: 2750 kg
Equipment:
Tool...
11
STAR SB-20R Type G
Year of construction: 10/2014
Controller: Fanuc Series 0i-TD
max. turning diameter: 20mm
max. turning length: 205mm
Main spindle power: 3.7kW
Counter spindle power: 1.1kW
Main spindle speed: 10,000 rpm
Counter spindle speed: 9,000 rpm
Dtxfahvj
Speed of driven tools: 8,000 rpm
tools
Lienar slide 6x lathe tools
Drilling device for 4 drill mounts front and back
Cross drilling stations 4 pieces
Rear 4 stations with drives
HD preparation
Counter-spindle blow-out device and spind...
2
The machine is in good technical condition, after prior consultation a test drive is possible.
Dzporq
4
Program controlled automatic lathe make TRAUB type TF 60/140
Machine # 194 Year of construction 1976
technical data:
Ccoqma88eo
max. bar capacity 60 mm
max. chuck 120 mm
max. clamping diameter 130 mm
swing diameter 190 mm
21 spindle speeds 21 - 2000 rpm.
switchable speeds 4 right 2 left
slide travel 125 mm longitudinal
70 mm crosswise
installed power 14 kW
with
- copying device
- spreading device
- hydr. clamping device
- bar feeder
- 2 vertical slides
- 2 horizontal slides
- collet set
- thre...
7
used MESSING STAR CNC Swiss type lathe SR32JN New, year 2011
CNC control FANUC 18i-TB with 7 axed
C-axis on main and counter spindle
Short lathe
Main and counter spindle collet type F37
Standard equipment tool holder
Linear slide
6-fold tool holder shank 16x16mm
3 cross drilling units ER16 (machining stations)
2 cross drilling units ER16 (machining stations)
Drilling device for front/rear face machining
Drive unit for tools for main side machining
Counter spindle for backworking
Backworking wit...
7
turning diameter over bed / mm
spindle passage 28 mm
turning length 3000 mm
-----
BASIC FUNCTIONS
- number of turrets 2
- live positions: yes
WORKING RANGE TURNING
- turning diameter (max) 28 mm
- bar diameter (max) 28 mm
- worpiece length max. 3000 mm
MAIN SPINDLE
- c-axis: yes
DIMENSIONS / WEIGHTS
- space requirements -left/right- 2600 mm
- space requirements -front/back- 2400 mm
- total height 1700 mm
Feh9ksp3e
ATTACHMENTS (TURNING)
- - bar length (m...
Catalog No. : 5274
Type: OPTIMAT A 42
Producer: MAS
Made in: 2005
Characteristic:
Max. bar diameter: 42 mm
Maximum bar length: 3000 mm
Maximum spindle speed: 3520 1/min
Maximum number of tools: 6 pcs
Total power demand: 10 kW
Weight: 2500 kg
Equipment:
2bua2by
Technical books
Collets
Tool holders
Paddle
Piece counter
4 cross slides
Device for longitudinal turning on the first support of the machine driven by its own curved disc
Equipment for guiding material bars IVT 50
8
STAR SR20RIII
Year of construction: 04/2011
Feed hours: approx. 18,900h
Control: Fanuc 30i Model A
Technical specifications:
Number of axles: 7
max. processing diameter: 20mm
Main spindle speed: 10,000 rpm
Counter spindle speed: 8,000 rpm
C axis on main spindle and counter spindle
Headstock stroke: 205mm
Turning tools: 6 pieces of linear slides
Drilling tools: 4 pieces
Cross processing tools: 5 pieces
Rear Stations: 4 pieces
Machine dimensions: 2,200 x 1,200 x 1,700 mm
Machine weight: approx....
11
Multi-spindle milling machine with integrated bar feeder LNS QLS80S2. Machine was used only for dry machining of plastics. Bar capacity 16 mm. Sawing unit (lateral), one HF spindle (frontal)and gripper unit (frontal). Control Fanuc OiMD
Qea2t
2
Dear Sir or Madam,
we are selling an automatic lathe ST-38 from STAR. The lathe is in a very good condition and is currently in production at our company. The machine would be available at short notice.
The following components are included in the offer:
-Lathe STAR ST38 incl. JBS guide book system and CO2 fire extinguishing system.
-bar feeder 6 meter FMB Turbo 5-55 incl. bundle loader
-high-pressure pump unit incl. hinged chip conveyor from Müller Hydraulik
-oil cooling unit Fa. Daikin
Opt...
5
The machine is in good technical condition, by prior arrangement possibility of testing. Mileage 38,000 hours. Suitable for series machining of precision turned parts (possibly with side milling) in larger series. Very good condition - the machine was used all the time under oil - machined parts for medicine. Service book. Incl. documentation. Teximp Stroj is served by the exclusive distributor and is located in České Budějovice. max. workpiece diameter 13mm (without turning the bar end) max. wo...
6
turning diameter over bed / mm
spindle passage 36 mm
turning length / mm
-----
BASIC FUNCTIONS
- number of spindles 2
- - counter spindle: yes
Sxlnowid
- number of turrets 1
- live positions: yes
- number of c-axes 2
- number of y-axes 2
WORKING RANGE TURNING
- bar diameter (max) 36 mm
MAIN SPINDLE
- spindle revolutions (min) 6300 /min
- drive power S6 40% 10.7 kW
COUNTER SPINDLE
- spindle revolutions (max) 6300 /min
ELECTRICAL SPECIFICATIONS
- m...
9
with Iemca Boss 332E/32 barfeed new in 2004 - MTA water cooler mod. RWD 010/C - Fanuc 18i-TA Control
Qgldh
10
turning diameter over bed 26 mm
spindle passage 26 mm
turning length 450 mm
spindle stroke 450 mm
main spindle speeds: 8000 U/min
spindle drive 5,5/3,7 kW
Sub - spindle - bar diameter 26 mm
turning speed range sub spindle 8000 U/min
Izh8ao9
motor power 5,5/3,7 kW
collets 145E
total power requirement 16 kVA
weight of the machine ca. 4,2 t
dimensions of the machine ca. 2,4 x 1,6 x 2,3 m
MAIER swiss lathe in first class condition (partially overhauled by Maier
Wehingen)with cnc control FANUC 3...
7
used CNC-lathe Citizen L20-VII, year 2003
control, Cincom Mitsubishi Meldas,
7 axes (X1/Z1/Y1/C1/X2/Z2/C2,
bar-Ø max. 20 mm,
turning length max. 205 mm,
main spindle, speed max. 10.000 rpm, C-axis 0,001 deg,
counter spindle, speed max. 10.000 rpm, C-axis 0,001 degree,
Tool holder f. total 18 tools (linear tool holder, front attachment, backworking),
parts conveyor belt,
fire extinguishing system
chip conveyor,
loading magazine IEMCA BOSS 432r
The machine can be inspected by appointment.
C...
8
turning diameter over bed 20 mm
spindle passage 20 mm
turning length 240 mm
Cbnxoexr
control Fanuc 310i
weight of the machine ca. 3.8 t
7
Swing diameter over bed: 950 mm
T7iovwlj
max. turning length: 6000 mm
The machine is in good technical condition, by prior arrangement the possibility of test drive. This is a 3-bed CNC lathe from Kraft, type Kraft 6000, 950/6000 between centers, 950 turning diameter over the bed, 800 over the slide. Purchase price of a new machine - about 7.000.000 CZK. Steady rests are driven, tailstock also with hydraulic and manual locking. Pinola only by hand.
4
Total package:
TORNOS fixed tool holders
for X1Y1; X2Y2; X4Y4
- Turning tool holder for 16x16:
for DECO2000 ø20 & 25mm
DECO 20 and DECO 26
consisting of:
No. 8032 with height 38mm in total 4 x available
Bext3zji
No. 8032 with height 42mm total 4 x available
11
STAR SV-32
Year of construction: 2001
Control: Fanuc 16i-T
maximum diameter: 32mm
Headstock stroke: 310mm
Drive power: 7.5kW (HS) + 5.5kW (GS)
Spindle speed (HS+GS): 7,000 rpm
7 axes + 2 C axes
tool system
Linear system with 4 tools
3 cross drilling tools, driven
Turret with 10 stations, all powered
Accesories:
Bar loading magazine IEMCA BOSS 432 with 32 channel / 20 channel
High-pressure system with tank 80 bar
Removal of "long parts" incl.
extended discharge tray
sub-spindle flushing
Coun...