Used turning automatic lathes for sale (234)

Condition: ready for operation (used), Year of construction: 1999, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement Nkjdpfxox D D Iko Ag Iju • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 12,000 rpm, This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a "HYBRIDE 10+5" drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine. Additional information • Electrical control box • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Pivoting workpiece holder on the counter spindle • Directional spindle stop S1 • 3 pre-settable turning tool holders • 4 fixed tool holders • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Independent counter spindle • Tapping attachment for collet chuck ESX 12 Nkedpfxex D Dmyo Ag Iou • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mmOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. Additional information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V Nodsx D Dliepfx Ag Isku • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,578 h, This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information. • Drum with loading magazine • 10+5" HYBRID drum • Integrated hydraulic unit • Support leg rear/front • 1100 mm center height • Filter with 25 liter capacity • Electrical: 380 V, 3-phase, 50/60 Hz motor voltage • Control voltage: 24 V DC • Bar compatibility (for 14 guide tubes): Nkedpfx Agjx D Dm To Isu • 1–4 mm diameter bars • 4 mm diameter bars • 8 mm diameter bars Additional equipment • 1 piece oil basin • 1 chip collecting basinOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2007, This TORNOS DECO 10e was manufactured in 2007. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and multiple tool holders for versatile operations. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Ideal for precision turning with a lathe capacity of 10 mm. Consider the opportunity to buy this TORNOS DECO 10e Swiss type turning machine. Contact us for more information. Additional information • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • 3 pre-settable turning tool holders Nkedsx D Dmmspfx Ag Ieu • Motorization S2 • Tapping attachment for collet chuck ESX 12 • 4 fixed tool holders • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Lathe capacity 10 mmOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2010, This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine. Additional information Nodpfx Aex D Dndog Isku • Electrical control box • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Movable headstock • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12000 rpmOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2010, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also comes with a loading magazine, integrated hydraulic unit, and an electrical control box. If you are looking to get high-quality turning capabilities consider the TORNOS DECO 10a machine we have for sale. Contact us for more information. Additional information • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Movable headstock • Directional spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Tapping attachment for collet chuck ESX 12 • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box Nedox D Dmtopfx Ag Ijku • Motor voltage 400 V • Control voltage 24 VOptional: Comprehensive package of measuring instruments

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Chip conveyor Coolant pump 20 bar Nodpfx Aoxrf Etsg Ioku IFS oil mist filter Bar loader FMB turbo 3-36

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T NC controlled axes 6 Original Japan With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) - Central lubrication - Door interlock - Ready part conveyor Nksdpfxexvbbfj Ag Isu The lathe was removed from production recently. Good condition.

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 8,000 rpm, overall weight: 3,500 kg, total height: 1,600 mm, travel distance X-axis: 310 mm, controller manufacturer: FANUC, controller model: Series 18i-T, product length (max.): 2,600 mm, number of axes: 3, This 7-axis KMT Speedmaster 104260-H was manufactured in 2001. It features a spindle speed of 8,000 rpm, chuck size of 20 mm, and bar capacity of 20 mm. The machine includes two turrets, each holding 8 tools, and is compatible with steel and aluminum. Consider the opportunity to buy this KMT Speedmaster 104260-H swiss type turning machine. Contact us for more information. • X 1 axis – 50 • X 2 axis – 375 • Chuck size – 20 mm • Bar capacity – 20 mm • Number of turrets – 2 • Number of tools per turret – 8 • Machine width – 1,200 mm Nedeydlpqepfx Ag Ieku • Coolant system – Through spindle and flood coolant • Material – Steel and aluminum compatible Additional equipment • Set of tool holders and collets • Optional pneumatic tailstock

Condition: excellent (used), As-new tool holders for DECO 20 - DECO 26 4 pcs - TORNOS static tool holders For X1Y1; X2Y2; X4Y4 ----- - Turning tool holders for 16x16 mm tools: - Price per holder: €180.00 each For DECO 2000 ø20 & 25mm DECO 20 and DECO 26 3 with front plate Njdpeh Uulkefx Ag Isku 1 without front plate ----- Shipping within Germany: €12.00 Shipping within the EU: €25.00 Additionally, we have 6 spindle reduction inserts: Were used in DECO 26mm Internal ø 8.0mm; ø 12.0mm; ø 21.0mm; 3x ø 26mm Outer ø 30mm, thread M32x1.5, length approx. 360mm Flange outer ø 45mm x 9mm, 4x M4 threaded holes 2x 8mm slots Special price for all 6 reductions including shipping: €380.00 Images can be provided upon request – we kindly ask for your email address.

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Nsdpfx Agoydaads Ioku Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Max. bar diameter: 20 mm Max. headstock stroke: 205 mm Spindle speed: 500 - 10,000 rpm Max. bar diameter on sub-spindle: 20 mm Max. sub-spindle speed: 8,000 rpm Number of usable tools: 22 Turning tools with multiple tool holders: 6 Driven tools for cross machining: 3-8 Front drilling tools: 4 Rear drilling tools: 4 Driven tool speed: 8,000 rpm Nodpfoyb R Awox Ag Ijku Bar feeder FMB turbo 3-26

Condition: excellent (used), Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, TRAUB TNL 18 – CNC Swiss-Type & Short-Turn Lathe Ex Works, previously used in medical technology, rejection rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, productive in current use Included: High-pressure coolant system (KSS) + bar feeder Spindles & Machining Main spindle: motor spindle Max. bar capacity main spindle: 18 mm (optionally 20 mm) Max. main spindle speed: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter spindle: available Max. bar capacity counter spindle: 18 mm Max. counter spindle speed: 12,000 rpm Njdpfx Ajycl Udog Ieku C-axis counter spindle: yes Tooling System Upper turret: 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Rear tooling device: 7 stations Max. simultaneous tools in cut: 3 Tool capacity: Standard: 22 Maximum (with multiple holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Large travel ranges for Swiss-type and short-turn operation Simultaneous machining with main and counter spindle: yes Coolant & High-Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High-pressure (option, included): up to 20 bar Flow rate: approx. 28 l/min Filtration fineness: 50 μm Electrical Data Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Max. fuse protection: 63 A Rated power: 35 kW Connection load: 24 kVA Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (listing short text) TRAUB TNL 18, year 2013 CNC Swiss-type & short-turn lathe Main and counter spindles 2 turrets + rear tooling device High-pressure coolant included Bar feeder included Very rigid production machine Rejection rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine / Deep hole drilling – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Grinding bench DP07 – Grinding & polishing (implants) – 1986 Turntable blasting unit Rösler RWT 1000-I – Blasting cabin – 2012 Bending machine C 202 M – Bending – 1990 Schmidt hydro-pneumatic press – Press / hydro-pneumatic press – 2021

Condition: reconditioned (used), Year of construction: 2017, For sale: CNC Swiss-type lathe TORNOS GT 26/6 II, including bar loader Manufacturer: TORNOS Model: GT 26/6 II Year of manufacture: 2017 Max. bar capacity: 26 mm CNC control: FANUC Nsdpfxjx N Dg Te Ag Isku High-dynamic turning and milling operations Suitable for complex series production parts Axis / spindle concept – TORNOS GT 26/6 II Spindle concept: • 1 main spindle • 1 counter spindle • Synchronized machining for highly productive series manufacturing Axis concept: Linear axes: • X1 / Z1 – main spindle • X2 / Z2 – counter spindle • X3 – cross machining / additional tools C-axes: • C1 – main spindle • C2 – counter spindle Number of CNC axes: • 6 CNC axes Machining capabilities: • Simultaneous main and counter spindle operation • Milling and cross machining with C-axes • High process integration and short cycle times Machine weight: approx. 3,200 kg Transport dimensions (L × W × H): approx. 3,200 × 1,800 × 2,000 mm Bar loader Weight: approx. 700 kg Dimensions (L × W × H): approx. 3,500 × 800 × 1,500 mm We can also offer commissioning service upon request. The machine can be inspected by appointment near Heilbronn. Loading can be provided. Technical data, accessories, and machine descriptions are subject to change and non-binding.

Condition: new, Year of construction: 2025, The machine on offer is a new stock machine. We will be happy to provide you with a suitable quotation. Nkodpfxsychtpj Ag Iju

Condition: ready for operation (used), Year of construction: 2018, Max. clamping diameter: 20mm, max. workpiece length: 205mm (GB type), 45mm (NGB type), sub-spindle diameter: 20mm, sub-spindle bore: 21mm, max. sub-spindle speed: 9000/min, main spindle motor power: 2.2kW (continuous)/3.7kW (10min / 25% DC), sub-spindle motor power: 0.55kW (continuous)/1.1kW (15min / 40% DC), driven tool capacity: max. 6000/min, tool motor power: 1kW (continuous)/1.2kW (5min / 30% DC), control: Fanuc 0i-TD, connected load: 3.74kVA, noise level: 74dB(A), length: 2070mm, width: 1177mm, height: 1760mm, weight: 1700kg. With bar feeder for bars max. 3200mm and automatic bar loading magazine for bar diameter: 2-20mm. An on-site inspection is possible. Nkedpfx Agsw U T Trs Ieu

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: FANUC, This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, it's ideal for precision and efficiency in small part production. Contact us for more information about this machine. Additional equipment • 3x automatic bar feeders • 1x decoiler unit Machine Benefits Nkedpfx Agjyar E Re Iou Technical Machine Benefits • Bar capacity (through spindle): up to 12 mm • Rated power: 15 kva • Rated current: 32 a • Working voltage: 3-phase, 400v / 50hz • Control voltage: 24v dc • Type of current: ac • Lighting voltage: 24v dc Extra Information 3x identical, fully functional machines available Additional spare parts are also included

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Nkjdpfx Agexmurre Iju

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 37,000 W, spindle speed (max.): 10,000 rpm, overall weight: 2,300 kg, total height: 1,750 mm, controller manufacturer: CINCOM, number of axes: 6, This 6-axis Citizen Cincom A20 was manufactured in 2018 and features a main spindle with a maximum bar diameter of 20 mm and a speed range up to 10,000 rpm. It includes a sub spindle and driven tools with a tool system supporting up to 21 tools. The machine offers rapid traverse rates up to 32 m/min and comes with an LNS Express 220 bar feeder. Consider the opportunity to buy this Citizen Cincom A20 swiss type turning machine. Contact us for more information. Additional equipment • Bar feeder with magazine for bars up to 3 m • Diameter range: 2–20 mm • Automatic bar change system • Other accessories Machine Benefits Technical Machine Benefits • Rapid traverse: axis x1: 18 m/min axes y1, z1, x2, z2: 32 m/min Extra Information Workpiece Main Spindle: Max bar diameter: 20 mm Max machining length: 200 mm Main spindle drive power: 37 kW Spindle speed range: 10000 rpm Spindle indexing – C-axis: 0001 ° Sub Spindle: Max bar diameter: 20 mm Max pick-off length: 80 mm Sub spindle drive power: 15 kW Spindle speed range: 8000 rpm Spindle indexing – C-axis: 0001 ° Tools Driven Tools: Number of tools: 4 Speed range: 6000 rpm Drive power: 075 kW Tool System: Max number of tools: 21 For turning: 5 For drilling (fixed): 4 front / 8 rear Dimensions Machine Depth 2120 mm Nkjdeyaqhkspfx Ag Iju

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Nkodpsycp Nlefx Ag Iou Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 MAIN SPINDLE Max. bar diameter: 12 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Nkedpeycp Ihefx Ag Ieu Spindle drive power: 2.2 kW Number of tool positions: 13 SUB SPINDLE Max. bar diameter: 10 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Operating hours: 47,000 EQUIPMENT FMB Minimag bar feeder Note: Dismantling and loading can be handled by the seller for €1,500.

Condition: used, Year of construction: 2008, functionality: fully functional, Manufacturer: STAR Micronics Type: SR-32J Year of manufacture: 2008 Condition: Fully operational Availability: Immediately Nkjdpfx Aoya Euxeg Isu Location: Germany Technical Data (Summary) Max. bar capacity: 32 mm CNC Swiss-type lathe with sub-spindle Multi-channel/multi-axis machining Ideal for complex precision and series production Equipment / Accessories Automatic fire extinguishing system by Kraft & Bauer Chip conveyor Bar feeder IEMCA BOS 332-E Complete system for automated batch production Condition & Service Machines are fully operational Regularly maintained In production until recently Immediately ready for demonstration Inspection Inspection and test run under power possible at any time by appointment Demonstration welcome at our premises

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: R14507, Year 2008 with Fanuc 18i-TB With LNS Tryton 107 Country of origin: JP Voltage: 200V 3ph 50/60Hz Dimensions: 141x56x140 cm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS (Standard) Number of axes: 6 Number of spindles: 2 Main spindle Max bar diameter: Ø 7 mm Max machining length: 40 mm Stroke: 40 mm Spindle speed: 16,000 rpm Spindle power: 1.1 kW C axis indexing accuracy: 0.0001° Sub-spindle Max bar diameter: 7 mm Spindle speed: 10,000 rpm Power: 0.5 kW C axis indexing accuracy: 1° Tool post 1 Number of positions: 5 Driven positions: 2 Rotating tool speed: 8,000 rpm Njdpeya Aq Rsfx Ag Ijku Tool post 2 Number of positions: 3 End-working attachment Number of positions: 3 Sub-operation Number of positions: 3 All technical details are provided without obligation and subject to errors or omissions.

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, controller model: na, number of axes: 9, This 9-axis Hanwha XE 26 H was manufactured in 2017, featuring a sophisticated control unit. Ideal for complex horizontal turning operations, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities consider the Hanwha XE 26 H machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Z-axis: z1 axis travel: 210 mm (with bushing) • Z-axis: z2 axis travel: 215 mm Extra Information Inventory number: 00191 Type: Mobile turret lathe Condition: Used Status: Excellent Axes: 9 (5 linear + 4 rotary) Nkodpsyalnrsfx Ag Isu Sub-spindle turning diameter: Ø 26 mm Sub-spindle speed: 8,000 rpm Sub-spindle motor power: 1.5/2.2 kW Index: 0.001°