Used Automatic Turret Lathe for sale (24,221)

Condition: good (used), Year of construction: 1975, Turret lathe HESTIKA Type:HR42 built approx. 1975 Spindle capacity max : 42 mm with turret head and tool holder Multifix Type:B Blsdpfovgbqfex Apbeh Spindle speed: 88 - 2800 rpm Collet chuck device, coolant device, machine documentation. Machine in good condition .

Condition: good (used), Year of construction: 1965, Turret lathe HESTIKA Type: HR32 built approx. 1965 Spindle capacity max: 32 mm with tool turret, collet chuck device, Blsdpfx Asvgbphepboh Spindle speed :200-3200 rpm with coolant device, machine documentation . Good condition Ready for immediate use .

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Bledpfx Aju Iwyiepbjh Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: good (used), Ward turret lathe Chuck diameter: 200 mm Turning diameter bed: 290 mm Support turning diameter: 170 mm Bedpfx Apoq H Aqqjbslh Stroke: 185 mm Clearance: 32 mm Dimensions: 205x105x135 cm LxWxH

Condition: ready for operation (used), Machine in good operating condition Bledpfx Aoy Rnfvspbjh

Condition: ready for operation (used), Machine in good operating condition Bsdpfx Apoy Rnd Eebolh

Condition: ready for operation (used), Machine in good operating condition. Bledpfx Aey Rnczjpbsh

Condition: used, Automatic lathe Bjdeyllr Ijpfx Apbelh Manufacturer: STROHM Model: M125

Condition: used, Year of construction: 1969, Automatic turret lathe brand: INDEX type: B60 new in: 1967 equipped with: 6x turret Bedpfjylht Ujx Apbelh Thread turning device Material feed

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 24xx, For sale is a used but fully functional D6 with a turret; the machine was still in production up until it was shut down. The sale of the machine excludes any kind of guarantee or warranty! Sold as seen! Blsdpfxex Nphcj Apboh

Condition: used, Year of construction: 1998, functionality: fully functional, We offer various lathes such as INDEX GS30, INDEX GSC42, cam-type automatics B and C, Mahr roundness measuring device, Mitutoyo profile projector ... Price on request. Blodpfx Apsym Avmobeh

Condition: excellent (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, bar diameter (max.): 22 mm, INDEX MS22-8 Mfd. 2019 2 NCU 2 Syncrons 2 Y-Axis Bedpfx Apox H H Nrsbjlh Control: Siemens Solution Line Knoll System Bar Feed: IEMCA SIR rack loader (12-ft) 22,000 on-hours 10,000-15,000 Hours

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 14974, Tornos MultiSwiss 6x16  CNC Multi-Spindle Screw Machine Mfd. 2019 6 Motorspindles  5,5 kW max. speed 8’000 RPM Spindle capacity 16 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Bodpfx Apsv S H Uysbolh Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3003) contact us for more details

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS OPERATOR SAFETY DOOR GOOD RANGE OF ACCESSORIES Bsdpfx Asy H Hc Eopbslh

Condition: good (used), Year of construction: 2007, Ref. -No.: 10650 Manufacturer: UMARO Type: SC27 CNC MS2 Year of construction: 2007 Type of control: CNC Control: Siemens Sinumeric 840 D Storage location: Halberstadt Country of origin: Rumänien Turning Height: 2500 mm Gear stage 2 speed range: -180 RPM Swing Diameter: 2700 mm Rapid Speed: 8000 RPM Max workpiece height: 2500 mm Max. Workpiece Weight: 30.000 kg Max torque faceplate: 40000 kNm Vertical adjustment of the crossbar support slide: 1200 mm Smallest immersion diameter: 360 mm Max. Cutting force support: 50000 Nm Drive motor faceplate: 100 kW Workpiece diameter: 2500 mm Horizontal path of the crossbar X-axis: +/- 1250 mm Vertical path of the chisel slide: 1500 mm Chisel slide cross-section 2*: 250 x 250 mm cutting speed: 140 m / min Cutting depth: 14 mm Tool change time: 1 min Bledpfjzay H Ajx Apbeh Max. vertical working feed: 6000 mm / min Max. cross feed: 8000 mm / min Travel speed: 8 m / min Piston diameter: 250 x 250 mm Stößelweg: 1500 mm Further information: The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout Bedoyft Ahopfx Apbelh - New operator panel - Various accessories Inspection is possible at any time by appointment.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: Bjdpfx Apezaa T Njbelh 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm Bljdpfx Aeyft S Aopbjh - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. Bodpfxeyfurqo Apbelh - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl - Tool holder Inspection is possible at any time by prior appointment.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Single-column vertical turning lathe | Dörries VCE 1400 Bljdpsyft Nnofx Apbeh The machine was overhauled in 2010 by Hering, has recently been cleaned, and is in good condition. - Table diameter: 1,000 mm - Swing diameter: 1,400 mm - Turning height: 1,100 mm - Siemens CNC control type 840 D Shop Turn - Tool changer - X-axis travel: 2,000 mm - Z-axis travel: 700 mm - Slide adjustment: 1,000 mm - Rapid traverse: 6,000 mm/min - Spindle speed: 500 rpm - Handwheel - Total power requirement: 62 kW Inspection possible at any time by appointment. #Tags: Doerries | VCE1400 | Dörries VCE

Condition: new, Discover the ultimate power and precision of our vertical lathe series. With its robust construction and proven technology, it delivers groundbreaking results for your machining projects. Experience the limitless possibilities of our CNC variant and take your production to the next level. TECHNICAL MAIN DATA (CNC MODEL): - Max. swing diameter: 1500/1800/2750/4000/5000 mm - Max. turning diameter: 1250/1600/2500/4000/5000 mm - Max. workpiece height: 1000/1600/2000/2000/2000 mm - Spindle motor power: 30/37/55/75 kW - Table diameter: 1000/1250/2250/3600/3600/4500 mm - Max. table speed: 500/400/120/63/63/50 rpm ACCESSORIES: Fanuc or Siemens control, ZF gearbox, chip conveyor, lubrication system, hydraulic system, machine guard, air gun, tricolor lamp, work light, chip cart, foot pedal, standard tool holder. SPECIAL ACCESSORIES: C-axis, tool magazine, linear scale, tool presetter, workpiece probe, electrical cabinet air conditioner, special tool holder, and more. For further details, please refer to the attached PDF file. TECHNICAL MAIN DATA (CONVENTIONAL MACHINE): - Faceplate diameter: 1000|1400|1800|2000|2300 mm - Swing diameter: 1200|1600|2000|2300|2600 mm - Turning height: 1000|1250|1400|1600|1500 mm - Table speed: 6.3-200|5-160|3.2-100|5-160|2.5-80 m/min - Gear stages: 16 - Max. workpiece weight: 3.2|5|8|8|8 t - Main motor power: 22|30|37|37 kW - Approx. machine weight: 9|14|18|23|21 t ACCESSORIES: Tool holder: 5-fold; Faceplate: with 4 jaw clamps; Servo motors: for axis adjustment, and more. For further details, please refer to the attached PDF file. Bsdpfx Aod I I Ilepbjlh Conventional vertical lathe with solid and proven technology, power, and precision for the machining of heavy workpieces. - Optimal loading - easily accessible with crane and forklift - Vertical support with 5-fold tool holder and side support (optional) with separate feed for internal and external machining - Heavy-duty column construction with wide, hardened guides - Hydraulic clamping of the crossbeam - Stable guide construction provides excellent stability and accuracy to the vertical arm - The spindle runs in a highly precise double-row roller bearing and is adjustable - The drive is through a reduction gear for high torque and a speed range of 2.5 - 80 min- Warranty: 12 months on the machine Now get a 15% energy subsidy from BAFA when replacing an old machine! Also benefit from the favorable leasing and hire purchase conditions of our leasing partners. Ask us about it. Of course, you also receive free delivery, assembly/commissioning, and ready-to-use handover as well as control training from us. The special net price displayed refers to the smallest model of the conventional series. The images show the CNC variants as well as a conventional version.

Condition: new, Year of construction: 2023, functionality: fully functional, Hydrafeed Top Fusion 3.2 metre automatic bar feed. Built in 2023, but never used or fitted to a machine, so still mostly in original packaging. Capable of holding up to 3.2m bar lengths with automatic adjustment to take bars from 8mm to 51mm diameter. We just don't have the space in our new building to fit it to our DMG turnmill machines, so had to buy the 1.5 metre versions instead. Bljdpfx Ajvzzzmopbeh Cost £28,750 + VAT new, so >40% saving on list price for what is still a brand new machine.

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Blodpfxsvbb U Hj Apbeh Machine documentation available .

Condition: used, Year of construction: 2023, operating hours: 7,103 h, machine/vehicle number: 0031001593C/3984914, Internal No.: 2.4, Speed: 4,000-5,000 rpm, Weight: 6,400 kg, Maximum turning diameter: 200 mm, Maximum turning length: 1,000 mm, Spindle bore: 65 mm, CNC control: DMG MORI SLIMline Sinumerik 840 D Solutionsline, 16-position tool turret with driven tools: 5x radial, 6 (8) radially or axially driven tools, Y-axis +/- 600 mm, Counter spindle, 1 chip conveyor DMG MORI MTR032-23, with 1 automated bar feeder BREUNING, Type: Irco ILS-MUK-10012-III, Year of manufacture: 04.2023, Machine No.: 74 112 287, Weight: 850 kg, Subject to prior sale. Bledpfoy T Nw Ssx Apboh

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min Blodpomu Rtuofx Apboh total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *