Automatic lathe buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbuqvkgt0r 78" (2000 mm) Max. between centers, 9.8" round or 7" square (250 mm round or 178 mm square) max. part dia. with revolving steady rest, 6.5 HP main motor, 0 - 4,500 RPM spindle speeds; 0.5 HP hydraulic motor. -- Automatic controlled variable speed carriage with tool post and revolving steady rest, 0 - 32 FPM max. working speed, carriage return speed 33 FPM. -- Special cutting system with: (1) Roughing & (1) finish gouge for simultaneous rou... more
1
turning diameter ca. 100 mm turning length 100 mm Uqvp8qkjt number of slides 2 spindle hollow 42 mm face slide travel 55 mm turning speed range max. 5000 U/min greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
4
turning diameter over bed: mm spindle passage: 60 mm turning length: 45 mm tool turret - number of stations: 8 Number of tools: 6 St. turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m cam-controlled automatic lathe - 2 x rotary slide - 2 x cutting-off carriage - cooling system Machine i... more
4
turning diameter over bed 125 mm spindle passage 10 mm turning length 100 mm turning speed range 1000 - 10000 U/min Boring depth max. 70 mm F7jrsj2 speed control shaft 0,20 - 284 U/min total power requirement 5,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 6,00 x 1,50 x H2,00 m Bar feeder IEMCA CS112/42/CT more
6
spindle passage 32 mm turning length 320 mm Control Mitsubishi weight of the machine ca. 3,05 t CNC lathe Citizen Cincom M232-III MCL 2032/1889 7-axis simultaneous control Machine incl. Bar magazine LNS Express332, full synchronous spindle between main and pick-off spindle C axis on the main spindle Mmnpbk9f Accessories for machine: 6 tool holders right, height adjustable +/- 1,0 mm, Shaft 16 x 16 mm, for right or left tools 2 drill heads horizontally, n = up to 5'000 rpm, Collet holder E... more
1

AUTOMATIC HOPPER FED VARIETY LATHE LOCATELLI BIGARIETE

North Carolina, United StatesUnited States dealership location
518 km
1986
used
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Ihipdcd Hydraulic, automatic lathe for small wooden parts production; 4.75" (120 mm) max. dia. and 6-11/16" (170 mm) max. length with no boring, 4-3/4" with boring. -- Mandrel motor 5 HP, speeds at: 2,000, 2,540, 2,750, 4,010 & 5,140 RPM; hopper feed with 39-3/8" (1000 mm) max. blank piece length and automatic ejection of wooden parts. -- Equipped with: Chucking unit, Automatic tool holder carriages with (1) Copy head, (1) roughing tool, (1) finishin... more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t Uqvqibp7u dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
6
Max. length: 1400 mm Tp3vfoycj Max. diameter: 250 mm Hopper feed at the rear Reproductive tracer (tamplate or real modell) 2 front units and 3 jump-in knife tools on top more
2

multi spindle automatic lathe Schuette SF 20

Meinerzhagen, GermanyGermany dealership location
6460 km
1989
good (used)
Schütte multi spindle automatic lathe Cm89gxuy Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224... more


automatic ...
daily

New machines via email!

Stay updated!
6
turning diameter over bed 20 mm Mx2ar spindle passage 20 mm turning length 240 mm control Fanuc 310i weight of the machine ca. 3.8 t more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW Ptmhbm weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 1987 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle -threading unit -tool breakage control (photo:blue box on the top) never used. -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 m... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3y8emakf LOBO-COYER 'CP-168A' Hydraulic Copy Lathe. 26 1/2" length cap. with 4" min. length of stock and 1/2" - 4" max. diameter cap., hopper feed with automatic chucking, square or round stock can be hopper fed. -- Equipped with: 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change, 3 HP hydraulic motor. -- Complete with: Swivel control panel & safety wire mesh accross the front of machine; unit is capable of producing ... more
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm thread dia. 30 mm turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm total power requirement 5,5 kW weight of the machine ca. 1,9 t Srnyhk dimensions of the machine ca. 2,10 x 0,85 x 1,50 m with 2 cross and 2 parting-off slides, with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more
6

Chucking Automatic Lathe - Multi Spindle SCHÜTTE SF 32 PC

Mülheim.an der Ruhr, GermanyGermany dealership location
6388 km
1999
used
- - Multi-spindle automatic lathe Gzdojc7fy SCHÜTTE SF 32 PC Double recirculator series 4 no. 10 Year of construction: 1999 Spare parts for sale: Tool holders Technical specifications: Position 1 transverse slotted slide, position 2 along drilling slides Position 2 crosswise slit saddle wide, position 2 along cross sledge Position 3 crosswise slitting slit + 2nd stop, position 3 along cross slides Position 4 crosswise slides wide, position 4 along cross sledge Position 5 cross cross sle... more
3

multi spindle automatic machine turning Schuette SF 50/51 -6

Meinerzhagen, GermanyGermany dealership location
6460 km
1975
good (used)
Schütte multi spindle automatic lathe SF 50/51-6 pole lathe ran on cutting oil Ss09mw standard contactor control mechanical transmission Hydraulic integrated into the machine with screw conveyors Spindle bearing checked OK more
3
number of spindles 6 diameter 160 mm turning length mm Con8qup total power requirement 50 kW weight of the machine ca. 16500 kg dimensions of the machine ca. 1550x5050 mm 6-Spindle CNC Controlled Chucking Automatic more
6
turning diameter over bed 32 mm spindle passage 25 mm Bbyzexb turning length 355 mm Control FANUC OT turning speeds 300-6000 U/min turret 2x 5-fach total power requirement 10 kVA weight of the machine ca. 2,5 t dimensions of the machine ca. 2,5x1,8x1,7 m more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Yrrjoc MATTISON 57-F Manual Production Rotary Lathe with extended bed. --General data: 42" Cut Length Capacity with working dimensions 4" x4"max. x 3/4" x 3/4" min. -- 96" extended length of stock handled between centers. 17" max. diameter stock swing over carriage. --Drives: Spindle drive motor: 15 HP with spindle dia. 2-5/8" and arbor speed of 2,700 RPM cutter spindle motor. 1 HP & .5 HP work-piece rotation motor, (variable via pulleys). -- In... more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m Naifl multispindle turning machine INDEX MS25, built 1989 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle -threading unit -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM -Eilgang (190° Steuerwellendrehun... more
6

Turning Automatic Lathe - swiss lathe TORNOS DECO-2000/20

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6726 km
2001
used
turning diameter over bed mm spindle passage 25 mm turning length mm ----- BASIC FUNCTIONS - number of spindles 2 - live positions: yes WORKING RANGE TURNING Bbxljcxist - swing diameter (max) 25 mm - turning diameter (max) 20 mm - bar diameter (max) 25 mm MAIN SPINDLE - spindle revolutions (min) 0 /min - spindle revolutions (max) 10000 /min COUNTER SPINDLE - spindle revolutions (min) 0 /min ... more
4

multi spindle automatic lathe Schuette SF 32-6

Meinerzhagen, GermanyGermany dealership location
6460 km
1984
good (used)
Schuette SF 32-6 Bj 1984 Bb99incdeu - pick up - back side Tooling - seperate feed on pos. 1+2 and 4+5 ect. under power more
5
The automatic Petermann P7 with turret lathe Max. Diameter 7 mm max Drehlange: 70 mm bell curve with 50 mm with flat curve 50 mm with rotating sleeve Max length: 200 mm with stopper device Tool holder: 5 micro differential delivery Largest Gewindedurchm. with die diameter. 5 mm, pitch 0.5 in steel Diameter. 7 mm, pitch 0.75 in brass with revolver head diameter. 5 mm, pitch 0.75 in steel Diameter. 7 mm, pitch 1.0 in brass with self-opening diameter. 6 mm, pitch 1.0 in st... more
4

single spindle automatic lathe TORNOS MS 7

More Tornos Ms 7
Serenwaldstraße 10, 73563 Mögglingen, DeutschlandGermany
6710 km
1975
ready for operation (used)
Bar diameter 10 mm Bxistdd8 Turning length 60 mm 3 spindle Frontbore-milling device pick up spindle device with cross drilling unit LNS bar loader more
1

AUTOMATIC BACK KNIFE LATHE GOODSPEED CP-168 A

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cs0xki8o GOODSPEED - COYER CP-168 A Back Knife Lathe -- Manufactured machine authorized by GOODSPEED.° 26.7" Length cap., and 1/2" - 3.9" max. dia. [...] with: -- 10 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change. -- 3 HP hydraulic feed motor, 2-speed carriage. -- Swiveling control panel, PLC sequence controller built into separate control cabinet. -- (3) pressure gauges, automatic way & support collar lubrication. Featu... more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 1989 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle, not installed, defect. -threading unit, defect, clutch? -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM... more
4

Turning Automatic Lathe - swiss lathe GILDEMEISTER SPEED 32/10 LINEAR

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6726 km
2008
used
turning diameter over bed mm spindle passage 33 mm turning length 320 mm ----- BASIC FUNCTIONS - number of spindles 2 - - counter spindle: yes - number of c-axes 2 - number of y-axes 1 WORKING RANGE TURNING - turning diameter (max) 32 mm - bar diameter (max) 33 mm - worpiece length (max) 320 mm MAIN SPINDLE - spindle revolutions (max) 8000 /min - drive power S6 40% 7.5 kW - drive power S6 40... more
1
Multi spindle automatic lathe Gildemeister AS 67-6 built in 1972 Bb99hz9x3s -Thread cutting device -Thread cutting screw -Conveyors -various accessories and collets more
7
PETERMANN 10 HS Maximum diameter of the material can be edited for the machine 12.70 mm Maximum length of turning with advance Doll by cam Bell: with a run 80 mm with adjustable run 80 mm with rotating barrel for approximately 60 mm for 70 mm form material Maximum length of turning with progress Doll by cam plate: with a barrel of 50 mm adjustable bore 50 mm with rotating barrel 40 mm Maximum thread diameter with automatic thread Steel not 1.25 mm 8 mm Brass not 1.50 mm and 10 mm M... more
4

single spindle automatic lathe TORNOS MS 7

More Tornos Ms 7
Serenwaldstr. 10, 73563 Mögglingen, DEGermany
6710 km
1975
ready for operation (used)
Bar diameter 10 mm Turning length 60 mm 3 spindle Frontbore-milling device pick up spindle device with cross drilling unit Iwflap7 LNS bar loader more
1
Elect./Voltage: Ikh02kn HAPFO AP-5000/HYDRO Hydraulic Copy Lathe. -- Specifications: 62-3/4" Max. chucking cap., 59" copy length and 9-3/4" max. turning dia.; (1) 2.3/1.75 HP two-speed spindle motor, 0.5 HP DC motor feed drive for carriage. Feed electronic infinitely variable 0 - 11.5 FPM; (1) innovative hydraulic tracing device with 6" stroke and only 2-3/8 ounce pressure, center height 9-27/32". -- Includes: (1) HSS Copy lathe tool, original sample tracing device, dust collection hood, r... more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm Bbebyb0w8q total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 198 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle, never used -threading unit -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM -Eilgang (190° St... more
4

Turning Automatic Lathe - swiss lathe TRAUB TNK 36

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6726 km
2005
used
turning diameter over bed mm spindle passage 36 mm turning length mm ----- BASIC FUNCTIONS Nbgdz - number of spindles 2 - - counter spindle: yes - number of turrets 1 - live positions: yes - number of c-axes 2 - number of y-axes 2 WORKING RANGE TURNING - bar diameter (max) 36 mm MAIN SPINDLE - spindle revolutions (max) 6300 /min - drive power S6 40% 10.7 kW COUNTER SPINDLE - sp... more
4

multi spindle automatic lathe Schuette SF 13

Meinerzhagen, GermanyGermany dealership location
6460 km
1991
good (used)
Schütte multi spindle automatic lathe 6-San Diego with mechanical transmission -Thread cutting gear -Screen capture facility -When editing Gw2rrnuuq -Conveyors -Rod Guide etc. among current to visit! more
9
MANURHIN automatic 20 Bccrvtw2nf Machine data: Spindle control: Pole-reversible motor: MANURHIN Traminer 20. 3 and 4.5 kW Speed Traminer 20 speed min. 500 speed max 6'000 rpm. Traminer 20 lathe with mobile headstock and numerical control by means of digital computer system. more
3
spindle passage: 29 mm Number of tools: 6 St. turning length: 45 mm tool turret - number of stations: 8 turning diameter: 32 mm drill depth: max: 70 mm range of rpm - spindle: Drehen: 48 - 1500 U/min threading: Drehzahl: 24 - 750 U/min total power requirement: 5,5 kW weight of the machine ca.: 2,2 t Yqaay8 space requirement of the machine approx.: L:2,1x1,0x1,8 m cam-controlled automatic lathe - 2 x rotary slide - 2 x cutting-off carriage Machine is not connected. On sale as is. Component par... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Glmzmofv3 NC automatic copy lathe for symetric and asymetric parts. 76" max. length cap with automatic hopper feed of 65" (1700 mm) stock capacity. -- Single spindle copy (from template or sample) shaping and sanding lathe with SIEMENS "Sinumnerik 810" NC control, color graphics display; can program spindle speeds, feedrate, parameters etc for each profile. 76" Max. length with double end drive, 4 HP motor, shaper head with 5.5 HP motor. -- Variable ... more
6
max. machining diameter 12,7 mm max. machining length 130 mm Control TX 8i Main spindle: turning speed range - main spindle 0 - 12.000 min/-1 power capacity - main spindel 4,0 / 2,5 kW max. Torque 7 Nm spindle bearing diameter 35 mm max. bar capacity 12,7 mm C-Axis 0,001 ° Subspindle: Spindle speed range subspindle 0 - 12.000 min/-1 power capacity - Sub spindle 4,0 / 2,5 kW max. Torque 7 Nm C-Axis 0,001 ° turret: number of toolpositions 6 pos. Shank diameter 12 x 12 mm Number of driven to... more
6
turning diameter over bed 33 mm spindle passage 33 mm turning length 320 mm control Fanuc 310 turning speeds 80-8.000 U/min c-axis 0,001° Bbumpqgvyq gripping station 33 mm turning speeds 8.000 U/min c-axis 0,001° number of controlled axis 8+2 C-Achsen Number of working hours 45000 h load magazine Iemca Boss 332-E number of workpiece supports 6+4+4+16 number of driven tools 4+16 mm total power requirement 7,5 / 5,5 kW weight of the machine ca. 6 t dimensions of the machine ca. 4,8 x 1,7 x ... more
2

multi spindle lathe Schuette SF 13-DNT

Meinerzhagen, GermanyGermany dealership location
6460 km
1989
good (used)
Schütte 6-spindle automatic lathe, Kurvengesteuert Cm2909mo DNT-version with independent speed and cycle time Max bar passage: 13.0 mm for bars up to 3.30 m -incl. rod guide, - conveyors - steel processing, with cutting oil ran - equipped just with tools - 1 set of curves for cross slide - 1 set of curves for cradle -Screen capture facility -Thread cutting gear more
7
MANURHIN automatic 16 Machine data: Spindle control: The 16 is 5-axis Bahnkontournumerischen us working with open loop control with linear interpolation, equipped with one. Pole-reversible motor: MANURHIN Traminer 16 2 and 3 kW Speed MANURHIN Traminer 16 speed min. 600 speed MAX 7'200 RPM. Traminer 16 lathe with mobile headstock and numerical control by means of digital computer system. Bccrvauqfd more
5
x-axis: 150-180 mm y-axis: 70-80 mm turning length: 180 mm number of slides: 2 control: SPS Tecomat NS 950 spindle diameter: 160 mm Bjymx0ee total power requirement: 12 kVA weight of the machine ca.: 2,2 t space requirement approx.:: L:2,0xB:2,0xH:2,3 m Single spindle short turning automatic (Ends-Lathing Automatic) Construction Single spindle-horizontal, for serial production of small parts Turning dia.: lateral face turning =60-140mm; longitudinal lathing=ca.160mm Swing dia.: Two cross movin... more
5

Turning Automatic Lathe - swiss lathe TRAUB TNK 36

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6726 km
2002
used
turning diameter over bed mm spindle passage 36 mm turning length mm ----- BASIC FUNCTIONS - number of spindles 2 - - counter spindle: yes - number of turrets 1 - live positions: yes - number of c-axes 2 - number of y-axes 2 WORKING RANGE TURNING Bbp28ppihr - bar diameter (max) 36 mm MAIN SPINDLE - spindle revolutions (min) 6300 /min - drive power S6 40% 10.7 kW COUNTER SPINDLE ... more
6
max. machining diameter 12,7 mm max. machining length 130 mm Control TX 8i Main spindle: turning speed range - main spindle 0 - 12.000 min/-1 power capacity - main spindel 4,0 / 2,5 kW max. Torque 7 Nm spindle bearing diameter 35 mm max. bar capacity 12,7 mm C-Axis 0,001 ° Subspindle: Spindle speed range subspindle 0 - 12.000 min/-1 power capacity - Sub spindle 4,0 / 2,5 kW max. Torque 7 Nm C-Axis 0,001 ° turret: number of toolpositions 6 pos. Shank diameter 12 x 12 mm Number of driven to... more
6
number of spindles 6 Stück spindle passage 32 mm rated current 85 total power requirement 50 kW speeds 200 - 1160 stufenlos U/min rated capacity Antriebmotor 18,5 kW Dimensions (L,W) 3850 x1390 mm spindle turning speed range ( Bereich 1) 450 - 3150 U/min spindle turning speed range ( Bereich 2) 200 - 1400 U/min Transport dimensions 5 x 1,5 x 2,3 m total power requirement 55A/380V/50Hz weight of the machine ca. ca. 8,8 t dimensions of the machine ca. 7,50 x 2,10 x 2,60 m Retrifit 2016 - Ma... more
1

multi spindle automatic machine turning Schuette SF 26

Meinerzhagen, GermanyGermany dealership location
6460 km
1980
good (used)
Schütte multi spindle automatic lathe SF 26-6 built in 1980 -with thread cutter -prepared for extraction system of rage of the Central -standard contactor control -mechanical gearbox Clqlryn -Balluff cam Schaltwerk -standart rod guide more
6
turning diameter over bed 12 mm spindle passage 13 mm turning length 210 mm turning speeds 200-12.000 U/min positive location each 0,001 Grad gripping station 12 mm turning length 120 mm positive location each 1 Grad turning speeds 200-12.000 U/min number of tools max. 20 number of milling stations 3 control Fanuc 0i-TD Number of axles 5 St. chip conveyor Mayfran kW total power requirement 2,2 kW weight of the machine ca. 1,95 t dimensions of the machine ca. 1,6 x 1,2 x 1,7 plus FMB m bar l... more
3
number of spindles: 1 spindle passage: 20 mm turning length: 350 mm Ys02ivmg turning diameter over bed: 240 mm revolution per minute: 23-4457 U/min spindle bore: 22 mm material length: 2000 mm voltage: 3x380/50Hz V / Hz total power requirement: 8 kW weight of the machine ca.: ca. 1,5 t space requirements of the machine approx.: L:1,84xB:0,9xH:1,8 m One Spindle - Cam Controlled Automatic Lathe with bar loader number of travels: 5 axis turret support travel longtidudinal 60mm, swing 125mm turret ... more
3
turning diameter over bed 50 mm spindle passage 26 mm turning length 275 mm total power requirement 12 kW weight of the machine ca. 4500 kg Cbwj9hz8 CNC-Sliding Headstock Lathe, Opposite Headstock more
1
Bccrmcrhmf Automatic hidraulically operated variety lathe. This wood-turning lathe has been specially designed for batch production of small wooden parts and allows turning of extremely difficult sections. more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC LATHE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close