Automatic straight knife grinder buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
• Maximum tool width 330 mm Jfcciqp • Tool diameter (min-max knife heads) 80 - 300 mm • Grinding wheel diameter (min-max) 125 mm • Grinding wheel bore size 60 mm • Grinding wheel speed 4000 rpm • Maximum grinding speed 530 mm/min • Grinding wheel drive 1,1 kW • Clearance angle 15 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Bbusl2nzmi GOECKEL G 65EL Automatic Straight Knife Grinder;Working length up to 5,080 mm (200") and 254 mm (10") for either planer or chipper knives. -- Construction: Welded in cell design. Guideways hardened and ground solid ways. Machine table electromagnetic with rotating chuck. -- Downfeed system: Servo variable speed down feed with impulse feed; end-end and rapid positioning. Feed rate 0.0002 ~ 0.02 mm/Min. -- Carriage/Head: Servo controlled varia... more
1
Automatic belt grinder for Cutlery monobloc or hollow handle or similar parts. Two doubble stations left and right for grinding of edges of Knifes bothsides on same time. With oszylating. Different shapes by cam follower. Bctygcgiqm Production Rate 400-500 pcs per hour more
1

Straight knife grinder MVM ZX1000

Strada Zara San Prospero /1 8, Suzzara - Italy, ITItaly
6963 km
2010
good condition (used)
Fully equipped straight knife grinder MVM Model ZX1000 with magnetic chuck, carriage steplessly variable speed, automatic grinding wheel downfeed etc Gfe00rp88 more
6

Profile and straight knife grinder Wadkin NX

Tamsalu, EstoniaEstonia dealership location
7064 km
good (used)
Dimensions: Height: 1600 mm Width: 1200 mm Depth: 1200 mm Weight 302 kg Qputvpkp Grinding wheel bore: 31,75 mm Grinding wheel diameter: 230 mm Grinding wheel width: 4,7 mm Maximum length of cutter profile: 240 mm Maximum diameter of cutting circle: 250 mm Minimum diameter of cutting circle: 100 mm Grinding wheel motor: 0,75 kW Grinding wheel motor speed 2500/2880 rpm Coolant pump motor: 0,14 kW Coolant tank capacity: 36 l Wadkin not a Weinig more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Yrrjuk ERMA ASM 45 automatic knife grinder for chipper, planer and paper knives. with a working length of 4,300 mm (168") length capacity. -- Grinding motor with 7.5kW (10 HP) for the grinding head. -- Flood coolant system. -- Variable speed head travel and replaceable ways. -- Magnetic knife bar 10' x 8". -- Manuals and some tools. more
6
Maximum tool width, standard 230 mm Ptcyti Tool diameter (min-max knife heads) 90 - 290 mm Grinding wheel diameter (min-max) 150 - 225 mm Grinding wheel width 5 mm Grinding wheel bore size 60 mm Grinding wheel speed, 4-speeds: 1500/1700/2400/3000 rpm Grinding wheel drive 1,1 kW Clearance angle grinding on back of knife 10 - 30° Side clearance angle grinding, manual 5 - 20° Lateral clearance angle grinding for straight knife heads Coolant tank 100 l Motor coolant pump 0,28 kW Connection values,... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbusliloeg MVM AF 2000 Automatic Grinder for straight knives up to a 80" (2000mm) in length for planer, veneer and paper knives. Stepless variable speed carriage with travel speed up to 60 FPM (20 meters/min). -- Automatic wheel down feed can be set for: per pass and total downfeed. -- Grinding motor 8.5 HP (6.3 kW) with 16 mm bore. Grinding chuck tiltable 0 to 90ø. Chuck clearence to wheel 4.3" (100 mm). Chuck width 4.7" (120 mm). -- Heavy duty coolan... more
6
Overall dimensions (H x W x D): 1300 x 750 x 1000 mm Weight: 500 kg Maximum grinding length 225 mm Maximum tool diameter 300 mm Cfbusfuw Grinding wheel width 5 mm Grinding wheel bore 60 mm 40 mm spindle (50 mm can also be attached) 3-phase 1,1 kW motor Coolant tank with pump Coolant tank capacity 90 l Pump motor 0,065 kW Machine is in good condition more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbusk80iqf MVM - GM 1000, [...] Knife [...] straight knives up to a 39" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set per pass and for total down [...] Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0° to 90°, and grinding head tilts +5° to -30°. Chuck clearance to wheel is 1.2" and chuck width is 3-1/2".Coolant: Heavy Duty flood co... more


automatic ...
daily

New machines via email!

Stay updated!
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Y2cpil CNC circular saw Topper/Facer is designed to gring the tops and faces of triple chip, variable pitch and alternating top or face. -- An industrial-grade computor and touch scree interface give the operator complete control of all functions. Grinding parameter for up to 14 saws, 6" to 36" diameter, can be stored in memory for instant set up. -- Features: -- Pentium 233 MMX [...] control. -- Touch screen for easy operation. -- Store memory for ... more
3

Knife grinder Reform AR 36 Type 51

Springe, GermanyGermany
6523 km
1990
ready for operation (used)
Grinding length: 3600 mm W7r7cvvn more
5
- grindable pipe diameter up to 150mm - cross adjustment of support - adjustable depth stop - mitre grinding 30° to 90° - grinding belt dimensions 2000 x 150mm Wvus8jh2 - surface grinding opening 300 x 150mm - contact plate B 150 / D 200mm - pulley B 150 / D 200mm - grinding belt speeds 15 + 30m/min - drive 400 V / 2.6 + 3,1kW special equipment: - pneumatic feeding accessory GU RA - contact role 1 inch / 1 1/4 inch / 1 1/2 inch - suction more
15
We offer: from the stock Geschalts-/ bearing resolution Knife holder for cutting machines Tidland performance 2 automatic 128401 A5 SP/20110492 525761-C -Modular mounting options allow for retrofitting in all machines
 User friendly function
 -Automatic "half-stroke function" to adjust the correct page pressure between the upper and lower knife rings
 -Optional pneumatic locking bracket pinion and cross button
 -By durable materials for rough industrial environments 
Air-flush... more
5
• dimensions 1600x1220x1800 mm; • suitable for frozen meat; P3aan7 • 2 feeding speeds; • 1 grinding speed; • power 400 V, 50 Hz, 32,4 kW. more
2
Demonstration tool: Desoutter straight grinder with collet, Wwal9zpg7 free speed: 25000 rpm Collet Ø-max.: 1/4" In. Power: 0,5 hp Weight: 0.88 lb. Length: 6.97" in. more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbusii9v23 WEINIG R 960 Profile Knife Grinder;Specifications: 9-3/8" Max. arbor length, tool dia. 11-3/4" max. to 4" minimum. -- Grinding wheel: speed inverter controlled; speeds from 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0° - 20° -- Equipped with: Onboard diamond wheel dressing, 8... more
4

automatic grinder Tormadex Lithormatic 1200 E 10

Gersfeld, GermanyGermany dealership location
6620 km
1993
used
Grinding diameter max. 180 mm grinding length max. 1200 mm Power:. 300-1800 pcs / hr. Spindle motor: 3.0 hp Oszilation: 0.75 HP brush reduction: 0.5 hp grinding diameter with 10 spindles 90 mm diameter grinding every 2nd Spindle: 180 mm Speed: 1500/2000/2600/3200 r / min. Weight: 1190 kg Machine dimensions (L x W x H): 2450 x 1200 x 1540 mm Cddjmlbf more
1
REFORM, VKM 55 Kdhq9bpde REFORM AFFILATRICE PER COLTELLI. REFORM KNIFE GRINDING MACHINERY, SHARPENING MACHINERY; REFORM AFFUTEUSE pour lames; REFORM AFILADORA de CUCHILLAS. Praticamente NUOVA, Practically NEW, Pratiquement NOUVELLE, Prácticamente NUEVA. The REFORM grinding machine Type VKM is a high precision grinding machine incl. lower front rail (easy access) and incl. accordion way covers (protection of the rails). Furthermore this machine includes a high precision ZS mi... more
6
Knife Grinder Grinder for sharpening planer thin ASN-810 Grinder is designed for automatic sharpening planer blades mounted in the package to 4 pieces. Sharpening is done face polishing pots. Assuming the chip occurs outside the cut. The size, number of passes working wyiskrzających, speed and the grinding head of recurrence points - are programmed in a microprocessor controller. The grinding head is moved along the bed by means of a motor-driven helical gear running on guides with recirculatin... more
3

Knife grinder PAL 480 x 1500

Laufen, GermanyGermany dealership location
6949 km
2000
used
horizontal knife ring grinder Gfrqeqtjo more
2
Demonstration tool: Biuuxhm3 Desoutter straight grinder with collet, free speed: 20000 rpm Collet Ø-max.: 1/4" In. Power: 0,5 hp Weight: 1.26 ib. Length: 9.76" in. more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Fwzscwn Rigid construction means low vibration displacement for super finish. Flood coolant with swing open splash doors keeping spray in the machine. -- Total removal grind with lift-off on return stroke. Precision alternate angle adjustment for right and left uniformity of 3/100 of a degree. -- Power saw lift with electronic control with automatic saw locator that sets saw to exact position. Power adjustment on hook and top angle moves head at the push... more
10

Profile and sraight knife grinder Wadkin NV 300

Tamsalu, EstoniaEstonia dealership location
7064 km
good (used)
Dimensions: Height: 1500 mm Width: 1270 mm Depth: 1100 mm Weight 400 kg Maximum length of profile: 310 mm Maximum diameter of cutterhead: 300 mm Minimum diameter of cutterhead: 75 mm Grinding wheel bore: 31,75 mm Grinding wheel width: 4,7 mm Maximum depth of cutter profile: 40 mm Motor: 1,5 kW Coolant tank: 22,7 L Coolant pump motor: 0,06 kW F9ekwbpba Wadkin not a Weinig more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 30ty9u9z WRIGHT W-150HB-B Automatic Face and Topper -- Heavy duty automatic saw sharpener for side grinding of carbide saw blades. Circular saw size 6" to 48". Blades up to 36" dia. are ground automatically; blades up to 48" are ground manually on this machine. -- (2) 3/4 HP motors for each grinding spindle, with spindle speed of 5,150 RPM's. -- Includes the following features: Grinds radial angles from 0 to 4°; tangential angles of 0 to 6°; and hook ang... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbusi3cbd8 WEINIG RONDAMAT R960 Powerlock Profile Tool Grinder -- Working dimensions 9-3/8" max. cutterhead length, tool dia. 3-15/16" to 11-13/16". --Specifications -- Motor: Inverter controled grinding wheel speed of 1,500 - 3,000 RPM with 1.5 HP motor. -- Productivity package: Machine light, back clearance angle motorized; grinding wheel advance motorized; setting of side clearance angle pneumatically. -- Tool carriage movement with precision linear ... more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Copxn7x WEINIG RONDAMAT R960 Profile Knife Grinder. Working Dimensions: 9-29/64" maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Arbor 40 mm diameter. Utilizes a template-stylus-copy s... more
1

AUTOMATIC BACK KNIFE LATHE GOODSPEED CP-168 A

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cs0xki8o GOODSPEED - COYER CP-168 A Back Knife Lathe -- Manufactured machine authorized by GOODSPEED.° 26.7" Length cap., and 1/2" - 3.9" max. dia. [...] with: -- 10 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change. -- 3 HP hydraulic feed motor, 2-speed carriage. -- Swiveling control panel, PLC sequence controller built into separate control cabinet. -- (3) pressure gauges, automatic way & support collar lubrication. Featu... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3y8emakf LOBO-COYER 'CP-168A' Hydraulic Copy Lathe. 26 1/2" length cap. with 4" min. length of stock and 1/2" - 4" max. diameter cap., hopper feed with automatic chucking, square or round stock can be hopper fed. -- Equipped with: 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change, 3 HP hydraulic motor. -- Complete with: Swivel control panel & safety wire mesh accross the front of machine; unit is capable of producing ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcv8g39ghl FRIULMAC RANDOMAX EVO DEFECT SAW AND END MATCHER ALL IN ONE -- Automatic defect cutting and end matching machine with: -- 7-1/2 HP (5.5 kw) trim saw -- 1-1/2 HP (1.2 kw) scoring saws -- 8 HP (6 kw) profiling unitsCapacities: -- 8” (200mm) min. to 78” (2000mm) max. length -- 2” (50mm) min. to 15-3/4” (400mm) max. width -- 1/8” (10mm) min. to 1-1/2” (40mm) max. thickness -- Conveyor belt speeds from 30-... more
3
Panhans S45 3.2m Automatic Beamsaw with Tilting Saw Carriage - 2005 CE Cutting length 3200mm Cutting depth 3200mm Cutting height max 60mm at 90 degrees Cutting height max 40mm at 45 degrees Main saw motor 7.5kw 350mm dia main blade Saw carriage feed speed 0 - 40m/min variable Bczupgru3f Pusher fence variable speed 0 - 25m/min forward, 40m/min return Cutting height adjustment with 4 levels Mitre cutting from 0 to 45 degrees Pusher with 5 panel grippers and 2 stops Touchscreen con... more
7
"B" AXIS 1 DEGREE range -15/+225, 1000MM CENTRE DISTANCE x 175MM HEIGHT, 2 EXTERNAL WHEELS 500/400MM, INTERNAL GRINDING, ACTIVE LENGTH POSITIONING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 16T. MACHINE AVAILABLE TO END USER CUSTOMER ONLY WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC GRINDING MACHINES FOR RENT..... WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER AND OFFER INSTALLATION... more
4

Spiral drill grinder SCHANBACHER S 3-50

Bünde, GermanyGermany dealership location
6460 km
1973
used
grinding range 3-50 mm sharp cornered angle min./max. 90-140° weight ca. 120 kg dimensions of the machine ca. 810 x 570 x 1260 mm Condition: ready for operation Electric 380 Volt Protective hood 9h220qtik Fine angle adjustable / grinding - kind tridimensional. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ksjzyi3f UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each [...] & Features: -- Automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; -- (2) 5 HP Dual-motors for shaping with 1-1/4" spindles. -- (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1" Max. part thickness, 4" max. part width. - Staggere... more
4

Push Fed Automatic Upstroke Crosscut Stromab Matrix

Liverpool, United KingdomUnited Kingdom
5686 km
2004
good condition (used)
Stromab Matrix Push Fed Automatic Upstroke Crosscut - 2004 CE A robustly built range of upstroke crosscutting machines designed for programmable and repetitive cutting from lengths of standard or random length long timber. The saw unit has a pneumatic upstroke action and is fitted with a Matrix type pusher unit for automatic feeding Specification Saw Unit TR500 Self braking motor 10hp Saw blade diameter 500mm Max cutting width (refer to chart)360mm Max cutting height (refer ... more
5
saw blade diameter:400 mm Bu2mipxl cutting diameter:130 mm stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min engine output:2,0 / 2,6 kW saw blade turning speeds:10 + 20 U/min total power requirement:12 A dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
5
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- *****ONLY 14,700 HOURS UNIVERSAL STUDER S36 FAVORIT***** 500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, LOW WORKING HOURS, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL ETC....PRICE... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t :80 mm Gvyz7l2x8 max. material thickness:20 mm min. material thickness:1,5 mm Mubea plate punching machine with coordinate table and CNC control. more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m Uqvqibp7u stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
8

Tool Presetting Equipment ZOLLER VENTURION 450 PILOT 3 SEMI AUTOMATIC TOO

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2014
good condition (used)
2014, s/n V4R4C300074, c/w – CNC Automation package, power spindle with auto focus, SK40 and HSK63 reducers/adaptors, manual Balluff System RFID chip system, Data output, Tool management system (Zoller TMS), CAM Interface Hmnn28lj more
1

AUTOMATIC CNC SHAPER (SHAPE & SAND) UNIQUE 4500

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Etbidgf UNIQUE 4540 Shape and Sand (CNC) with (4) stations. -- General Description: (4) shaper heads of which (2) can be used for sanding. Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding stations. All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out o... more
6
The head of the double reel can turn motor, so that on the one hand a coil can be inserted, while on the other hand continue (swing operation). The Dibalex band directional machine was 2012 being retrofitted. Technical data double reel H 5005 MD: Built in 1994 Federal load per page: 5,000 kg Vsauum Flange inner diameter: 450-530 mm Outer diameter: normal 1500-1580 mm, maximum: 1800 mm Band width: 160-500 mm Belt speed: 6.0-34.0 m / min Rotary way: 180 ° Total weight: ... more
15

Horizontal Bandsaws HYD-MECH H10A 10" / 254mm Twin Pillar Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. HSA0307115 Zi8lntk Capacity Rounds 10"/ 254mm Squares 10" x 10" / 254mm x 254mm Twin Pillar Yes Input 415/3/50 5hp approx Speeds 50-350 sfm Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp and Swarf Screw. Equipment 10' / 3048mm Roller Tracking Length Machine - 7' / 2133mm. Tracking - 10' / 3048mm Width Machine - 7' / 2133mm. Tracking - 2' 10" 863mm Height Machine - 5' 10" / 1778mm. Tracking - 2' 8" / 813mm Nett we... more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC STRAIGHT KNIFE GRINDER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close