Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Bbusl2nzmi GOECKEL G 65EL Automatic Straight Knife Grinder;Working length up to 5,080 mm (200") and 254 mm (10") for either planer or chipper knives. -- Construction: Welded in cell design. Guideways hardened and ground solid ways. Machine table electromagnetic with rotating chuck. -- Downfeed system: Servo variable speed down feed with impulse feed; end-end and rapid positioning. Feed rate 0.0002 ~ 0.02 mm/Min. -- Carriage/Head: Servo controlled varia... more
2

Edge grinding machine Vollmer CHHF 21H

Röthenbach an der Pegnitz, GermanyGermany
6759 km
1980
good (used)
Vollmer Flanken Sander CHHF 21 H Machines for unilateral flank grinding of carbide tipped circular saw blades with base Circular saw blades: Ba7ysyff2q Outer diameter: 80 mm to 700 mm Hole diameter: 10 mm to 105 mm Tooth pitch: from 8 mm Rake angle: 0 ° to 30 ° Tangential clearance angle: 0 ° up 5 ° Radial clearance angle: – 7 ° to + 3 ° Loop road (HM length): up to 15 mm Grinding wheel: Outside diameter: 100 mm Hole diameter: 32 mm Connected load: 0.49 kW Coolant pump capacity... more
3
Bcecdsba Knife grinding machine with magnetic bed of 3.155 mm Motor 11 kW more
9
In standard version machine for automatic sharpening of straight knives in the planing head -Automatic Division -Planing head diameter of min. 85 mm to 225 mm -Tool length of 330 mm (table lifting 440 mm) -Number of cutting edges any -Clearance angle adjustable 15°-35 -Spindle speed n = 4,000 rpm. -Grinding wheel D = 125 mm, bore d = 20 mm -Grinding motor 1,1 KW, n = 2,850 RPM. -Feed motor 0.053 KW, n = 1,300 RPM -Grinding speed 650 mm / min. -Part motor 0.033 KW, n = 1,300 RPM. -Use... more
3
SCHNEEBERGER sharpening machine, type Centromat Hcmlipzka more
5
Butt welding machine for wood and metal band saws, metal band saw of 3 x 0, 5 – 25 x 0, 8 mm wood band saw of 4 x 0, 4 - 25 x 0, 8 mm Bi-metal saws of 6 x 0, 9 - 29 x 0, 9 mm Dwcbpe Operating instructions and spare parts list available. Weight: 25 kg Very well maintained, very good condition more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbusn8gayp AKEMAT B Face grinder for carbide saw blades from 2-3/4" to 28"diameter. Tooth kerf up to 3/4". Tooth pitch from 5/16" to 5" with rake angle from -10ø to +30ø. -- Infinately variable grinding speed, with a cycl time of 20 teeth/min with .66 KW grinding motor. -- Wheel speed of 28m/sec. using 6" grinding wheel with 20mm bore. -- Newer style magnetic clamping and electronic control card. -- Complete with owner's manual. more
4
Vollmer Kreissaegenschaerfautomat Cana / s Hole diameter: 10-160 mm Outside diameter: 120-1000 mm Grinding wheel diameter: 250 mm Grinding wheel bore: 20 mm Tooth pitch: 10-90 mm Tooth height: up to 40 mm Bacgq9ebt0 Rake angle 10 to + 30° Sheet thickness: up to 6 mm Grinding angle: 5 °, 10°, 15°, 20 degrees Feed speed: 30, 50, 75 teeth/min Motor power: 0,75 + 0.75 kW 4 tooth forms: Grinding, are newly mounted drive and blower motor. Changed oil and belt. more
6
Straight and profiled knives Lpotso29 Spindle 40 mm and 1/1/4 inch Opticontrol setting stand included (1998) more
11
Rondamat R-980 - highly accurate knife head sanding machine -fully automatic grinding of cutters with program control -Deep grinding or pendulum grinding at the back of the knife -Axis angle on both sides 15 degrees Full equipment: -fully automatic grinding of finger jointing tools and milling cutters with program control -Deep grinding or pendulum grinding cutter breast -1 Borazonschleifscheibe for burrs, HSS + Stellite No. 912 9081885 -1 Borazonschleifscheibe for cutter heads, HSS + ... more


Sharpening...
daily

New machines via email!

Stay updated!
4
Package of used grinding machines for sawing and planing machines We sell the following grinding machines in the sales order Selling as a package to bid, simply us your price suggestion email -Saegeschaerfautomat Iseli type AS the sharpen circular saw blades for straight and helical cut with Special helical cut Year of construction: 1991 Motor: 380 V Advance Variator with inverter -Band saws cabinet maker VOLLMER AT Fkfheipfe Planer knife grinding machine Bäuerle for blades ... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Yrrjuk ERMA ASM 45 automatic knife grinder for chipper, planer and paper knives. with a working length of 4,300 mm (168") length capacity. -- Grinding motor with 7.5kW (10 HP) for the grinding head. -- Flood coolant system. -- Variable speed head travel and replaceable ways. -- Magnetic knife bar 10' x 8". -- Manuals and some tools. more
5

Kreissägenschränkmaschine Meinert PH2D

Röthenbach an der Pegnitz, GermanyGermany
6759 km
1983
good (used)
1 gebr. Circular saw Cabinet machine Meinert PH2 with stand for circular saw blades 150-750 mm diameter Gporfmxd Sheet thickness: 2,0-4,0 mm Tooth pitch: from 8 mm, including group teeth checked more
6
"Sharpening machine for non-carbide-tipped circular saws MACO FR 58 RS Saw diameter max mm: 600 Weight kg: 400 32yoe2pem Operating status: dismantled/ stored" more
1
Belt sanding machine Holzmann BS2000, like new, table 2000 x 1000 mm, motor 3 kW, chassis, BJ. 2007, suction connection on both sides Iwfhkkv more
4
TECHNICAL SPECIFICATION Length of the saw blades 200 - 1000 mm Thickness of the saw blades 0.5 - 3.0 mm Tooth pitch 3 - 75 mm Bb03cewlfb Tooth depth max. 15 mm Viewing angle 0 ° - 25 ° Baking angle 0 ° - 20 ° Cycle time 100 - 1000 mm / min. Grinding wheel RPM 3800 rpm Grinding wheel diameter 200 mm Diameter of the shaft of the grinding wheel 32 mm Width of the grinding wheel 3 - 6 mm Compressed air - min. 6 bar Compressed air volume cca 2 m3 / h Dwan7e Engine specifications: ... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Bbuslr3tyh JEFFERS JF-300A Profile Tool Grinder;Specifications: Working cap. 12" max. arbor length, 9" x 4" tool diameter. -- Tool cage movement with lineal bearing guides for smooth grinding to +/- .0001") accuracy. -- Grinding wheel speed inverter controlled with speeds from 1,800 - 3,600 RPM; 2 HP drive [...]: -- Side tilt feature, grinding wheel advance and back clearence angle settings. -- Tilting head assembly with radial (back) clearance a... more
1

Gate Cabinet saws Meinert PH4D

Röthenbach an der Pegnitz, GermanyGermany
6759 km
good (used)
Gate Cabinet saws Meinert PH4D Sheet thickness: 1.5 mm to 3 mm Tooth pitch 8 mm Cxdsv3l9 Tooth height of 7 mm Wear and tear parts replaced more
6
3 speeds quick adjustment, completely dismantled and overhaul workshop Ne73t more
1
2000, 3 kW, reserved long belt sanding machine Holzmann PB2400, BJ. 400 kgPreisänderungen, errors, printing and typographical errors reserved Vsc9ey more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbusliloeg MVM AF 2000 Automatic Grinder for straight knives up to a 80" (2000mm) in length for planer, veneer and paper knives. Stepless variable speed carriage with travel speed up to 60 FPM (20 meters/min). -- Automatic wheel down feed can be set for: per pass and total downfeed. -- Grinding motor 8.5 HP (6.3 kW) with 16 mm bore. Grinding chuck tiltable 0 to 90ø. Chuck clearence to wheel 4.3" (100 mm). Chuck width 4.7" (120 mm). -- Heavy duty coolan... more
5

automat for frame saw blades Vollmer CNHV

Röthenbach an der Pegnitz, GermanyGermany
6759 km
good (used)
1 gebr. VOLLMER Gattersaegenschaerfmaschine CnHV, overhauled Grinding wheels : 200 mm Tooth pitch 15-36 mm Bujgffoo Tooth depth at 0 ° rake angle: 5-30 mm Speeds: 30, 50, 75 teeth/min Rake angle: 0 °-30 ° Power: kW 0,55 + 0.55 + 0.125 4 slide of curves for different tooth shapes Maximum blade width: 140 mm Smallest blade width: 65 mm Greatest length of gear: 1.450 mm Very good condition, all wear parts replaced, new storage engines more
9
Saw teeth height 6 -30 mm Distance between teeth 25 – 90 mm Clamping angle 0 -35 ° Blade width bandsaws 60 – 360 mm Blade length bandsaws 6 000 – 14 000 mm Diameter circular saws 200 – 800 mm Grinding motor 2,20 kW Motorised height adjustment 0,37 kW Cutting angle adjustment 0,09 kW Cooling water pump 0,63 kW Moisture suction system 0,75 kW Ba0lbm9jd8 Pressure 6 bar Stands 6 pieces height adjustable Feed support 2 pieces Weight 1500 kg (Subject to errors, technical modification... more
4
combinated grinder and side dresser for stellite tipped bandsaws Grinder made by ISELI model SBT # 113939 with pusher at lef of the wheel , usefull for bandsaws on right hand turning headrig grinding wheel diam 250, centralised height adjstment on saw support for bandsaws up tot 8 " (206 mm) wide . Very precise grinding thanks to excentrcal movement in oilbath . This brings that you need to work 5 minutes if you might want to change pitch . one has to dismantle the excenter and bring in ... more
2
Saws sharper Vollmer CNE Ne772 more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 30zxxfqn AKEMAT U 3 Automatic Topper Carbide Saw Grinder for carbide saws up to 28” -- Motor: 0.9kw grinding motor, new double bar slide for grinding spindle. -- Complete: With double bar slide saw carrier system, hydraulic infeed infinitely variable for one pass grinding method via DC drive over roller ball spindle. -- Programs: Twenty-four (24) built in programs including triple chip in one pass. Complete with full flood coolant with double filt... more
3

Soldering iron Vollmer Loetgeraet LG 21 H

Röthenbach an der Pegnitz, GermanyGermany
6759 km
1979
good (used)
Vollmer soldering LG 21 H to the drain and brazing of CARBIDE teeth of circular saw blades Circular saw blades: Outside diameter: 100-830 mm Hole diameter: 6-160 mm Ba7ypyzntg Rake angle: - 10° to + 35 ° Power: 1.2 kW Weight: 75 kg more
6

Rolling mills and bench Alligator

Scheeßel, GermanyGermany dealership location
6472 km
good (used)
for band saw blades to 170 mm wide, rolling machine with special equipment for the rolling of sheet distortion, 3 new journal management bucks with rollers, 2 extendable support rollers, new bank building with multiplex plates, new rulers and hammers 08d9z0jr8 more
4
TECHNICAL DATA: Bahl7d Total connection kW: 1,5 Weight Kg: 190 more
2
Kreissägenschränker Meinert PH 2 Ne737 more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Y2cpil CNC circular saw Topper/Facer is designed to gring the tops and faces of triple chip, variable pitch and alternating top or face. -- An industrial-grade computor and touch scree interface give the operator complete control of all functions. Grinding parameter for up to 14 saws, 6" to 36" diameter, can be stored in memory for instant set up. -- Features: -- Pentium 233 MMX [...] control. -- Touch screen for easy operation. -- Store memory for ... more
2

Bench and rolling machine Vollmer VWM

Röthenbach an der Pegnitz, GermanyGermany
6759 km
1980
good (used)
Vollmer rolling machine with bench type VWM for gang saws Baldmtqtlv Blade widths up to 200 mm more
3
Precision - grinding machine Copy02h Fully automatic System PowerLock For more details see annex more
5

Bandsaw planing OPPLIGER PBS 860

Scheeßel, GermanyGermany dealership location
6472 km
good (used)
for band saw blades up to 300 mm wide, electric measurement system over Ruby button sensor, pneumatically automatic lane changing after each circulation cycle, number of cycles operated concave and convex roller pair, preselected Iouwsugwq more
4
SCHAeRFMASCHINE for TRENNBANDSAeGENBLAeTTER, very good condition ALBER TYPE HT, EURO 1400.--+ VAT FROM sawmill baby CHEEKS! 2tkcm327 more
2
Gatterschränker Meinert PH 6 Bcp8xh9kq0 more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Cuql77uc WEINING RONDAMAT R930 Profile Grinder --- 8-5/64" Arbor capacity, 11-27/64" dia. max tool dia., 13/64" Grinding wheel width, 2-23/64 grinding wheel bore, 1-1/2 HP dressing wheel motor, (4) step Vee-pulley with spindle speeds of 1720 - 2000-2500-2820, 20 gallon reservoir incl. pump and necessary piping for coolant. Radial clearance angle on the back is 10-30ø, axial clearance angle to both sides is 0-20ø. more
3
1 post original vollmer part washers for switching device (CNE and Cana/s) Yqdzhl0kc Outside diameter: 280 mm Bore: 150 mm Number of teeth: 20 / 42 / 48 / 54 / 56 / 64 / 72 / 78 / 100 / 110 more
5

Sharpening machine Weinig Rondomat 934

St. Pölten, AustriaAustria
7110 km
1995
excellent (used)
YEAR 1995, serial number. 934/687, 400 V, with integrated coolant circulation pump and before that the control buttons, machine dimensions approx. 1.400 x 1.300 x 1400 mm total Mufe3g more
5

Tool sharpening machine LOEWE SW2E

Scheeßel, GermanyGermany dealership location
6472 km
good (used)
sharpen Planer heads and cutters, part head Z = 2/3/4/5/6/8/10 or 12 edges, grinding head 360 ° rotation, head tilt +/-15° swiveling, grinding motor 750 Watts, table longitudinal movement 500 mm, table transverse movement 250 mm, height 170 mm, clamping table +/- 30°, total weight 600 kg Gnkijbqae more
1
Cylinder grinding machine Holzmann H ZS560U, 2014, good condition, standard equipment, 1.5 kW S1, 230Vm 132 mm shaft, maximum workpiece height 75 mm, Max grinding width 1100 mm, 0-3 m / min stepless feed, price changes reserved, errors, printing, and typographical errors reserved Ptno9q more
1

Circular saw Cabinet machine Vollmer AT

St. Martin im Innkreis, AustriaAustria dealership location
6963 km
good (used)
Circular saw cabinet maker Vollmer 8d0beg7yw more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glou9zk3e SCHMIDT TEMPO AS 400 Cold Saw Grinder ---For toothing and resharpening of HSS, segmental, friction and hot circular blades. -- Automatic infeed of the grinding wheel to the saw blade with max. removal of 4 mm. (1) saw blade clamping arm. -- The grinder will grind blades from 3/4" to 16" dia., with a thickness dimension up to 1/4". The grinding wheel motor is a 1 HP with a wheel speed of 3,400 RPM. -- The indexing feature on the grinder is hand... more
5

circular saw blade machine Vollmer Cne II

Röthenbach an der Pegnitz, GermanyGermany
6759 km
1979
good (used)
1 used circular saw sharpening machine Cne II Diameter of circular sawblades: 40 – 1000 mm Diameter of grindig disk: 200 mm Bore of grinding disk 20 mm Width of teeth: 5 – 60 mm Teeth high: 3 – 30 mm Span angle: -10° to 30° Deeowvuum Blade thickness: up to 6 mm speed: 30, 60, 80 teeth /min. Weight: ca. 300 kg engines got new bearings more


Sharpening...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close