Used Automatic Knife Grinder for sale (22,633)

Condition: used, Year of construction: 2016, Manufacturer : Kutter- und Gerätebau Wetter Model : AW D114 Year: 2016 Type : automatic mincer / grinder Power : 9 kW Tank capacity : 110 liters Diameter of perforated disc: 114 mm Csdpfsyvv Ddsx Ab Usgr Rotational speed – processing screw: 160/320 rpm Rotational speed – feed screw: 20–40 rpm Width : 820 mm Depth: 1260 mm Height: 1290 mm Weight : 570 kg Complete technical file  

Condition: excellent (used), Automatic carbide saw grinder VOLLMER model CHC 20 H Cgodpfx Absyx Aako Uer

Condition: excellent (used), Automatic straight knife grinder REFORM type 51 with magnet mm 1.300 long and grinding wheel motor 9,5 KW Cjdsyxgufopfx Ab Uogr

Condition: reconditioned (used), Size: max 460 x 350 mm, min 70 x 50 mm Speed: max 25 c/min Infeed height: 120 mm False opening: max 160 mm Speed: kW 7,5 kW Weight: 2.500 kg (approx.) Length: 220 mm Width: 160 mm Cgjdpsd Nt E Dofx Ab Ujr Height: 200 mm

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Cgjdpfx Aoxyff Njb Uor Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table Codpfx Ajpgwaujb Uegr - side knives - side gauges central lubrication standard accessories

Year of construction: 1998, condition: good (used), Built in: 1998 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Codpfxjga Dito Ab Ujgr Weight: 5.700 kg (approx.)

Year of construction: 2004, condition: good (used), Three knife trimmer automatic with integrated pre stacker Built in 2004 Size: max 384 x 340 mm min 140 x 103 mm Size trimmed: max 304 x 310 mm min 136 x 100 mm Book thickness: max 70 mm min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Cgodpfxef Iyb Ns Ab Usr Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment equipment for changing the format: - 1 set of pressing plates & holders - 1 set of size extensions - 1 set of table quick change plates - 3 sets of cutting sticks - 2 set of knives

Condition: excellent (used), Year of construction: 2006, Type: AV250 Serial number: 06089-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Cgjdpfx Abeyazi Se Ujr Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm

Condition: used, Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Cgjdsukg Dnspfx Ab Ujr Hopper content: 400 liters - 1000 liters

Condition: excellent (used), Knife grinder MVM model K250 with tilting magnet mm 3100 long, grinding wheel motor 13,5 KW Cgjdpfxeykrzyo Ab Uor

Condition: used, Year of construction: 1959, machine/vehicle number: 4651, Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30WBaujahr / Year 1959 - Serial-No. 4651 Semi-Automatic Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Csdjh Ax Tdspfx Ab Uogr On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Nice mixer grinder for large butchers or catering butcher, sausage/burger factory use. Cjdpsxxd E Sefx Ab Uogr

Condition: excellent (used), Automatic circular knife grinder Göckel model RB2 Csdex Hp Rrjpfx Ab Usgr

Condition: excellent (used), Knife grinder MVM model K250 with tilting magnet mm 2100 long, grinding wheel motor 13,5 kW Csdpfx Abjyg Ny Es Uegr

Condition: used, Technical data: Grinding wheel diameter: 250 mm Cjdpeymykbjfx Ab Usgr Manual feed Power supply: 380 V Total power: 1.1 kW Overall dimensions: Length: 1550 mm Width: 2000 mm Height: 2200 mm

Condition: new, Year of construction: 2025, Knife grinder with tilting magnet mm 1200 long, carriage speed steplessly variable, automatic downfeed of the grinding wheel, adjustable grinding length, support for the sharpening of 4 overlapped planer knives Cedpfewamkvox Ab Uegr

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Cjdsq Dzi Tepfx Ab Uogr Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Table Model: 800 Description: 800 grinders with a slat knife Cgjdpfx Aboh S Upio Uor

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Codpfjhzcabjx Ab Usgr Height: 125 Delivery time: 5 working days after advanced payment

Condition: used, Automatic Grinder Manufacturer: Seydelmann Model: AV 250 K Completely made of stainless steel Cgedeukgzyopfx Ab Uer Electric power: 81kW Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Cgjdpfx Abju H Af Uj Usr Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Condition: like new (used), Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Cgsdpfx Ajd S U E Rsb Uor Delivery time: 10 working days after advanced payment

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 1.600 kg/h Main motor power: 5.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 100 Lenght: 70 Height: 210 Cgjdpshwtpaofx Ab Uer Delivery time: 10 working days after advanced payment

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 2,400 mm, total length: 3,500 mm, grinding width: 180 mm, grinding wheel diameter: 250 mm, Equipment: documentation/manual, GRAFS GR-2400e is heavy-duty straight knife grinder / vertical surface grinder with swiveling electromagnetic chuck, suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives, planer and paper and knives HM / HSS for paper cutters. We are a sharpening shop for over 12 years. All our machines are in 100% build in GRAFS factory in Poland. TECHNICAL FEATURES / MAIN ADVANTAGES: • Mitsubishi Touch Screen operation panel HMI 7"; • Mitsubishi PLC, • Mitsubishi Inverter for carriage run adjustment / feed, • Internet communication system with GRAFS technical support in case of any problems, • Grinding wheel motor 11 kW (15 HP), 400-3-50 Hz; • Grinding wheel Ø250mm corundum in aluminum base, (segment grinding wheel upon request); • Reversal of grinding wheel rotation; • Electromagnetic chuck 180x2400 mm; Surface grinding 180x2400mm, • T channel on the other side of the chuck (from operator side), • Angular divisor for magnetic table rotation ±120°; • Fast grinding wheel descent and ascent (by switches) and slow approach by hand wheel; • Motorized automatic grinding wheel downfeed, controlled by Mitsubishi PLC (0.001-0.05 mm); • Automatic work cycle (roughing, sparkout); • Variable carriage speed from 1 to 16 m/min; • Coolant through 2 nozzles either side of the grinding motor; • Longitudinal grinding head angle adjustment from 0° to 5°; (flat surface grinding possibility), • External tank with pump; • Magnetic cleaner / filter MODEL MS, • Fast grinding wheel exchange system, grinding wheel adapter with 3 securing screws, • Exchangable hardened steel strips on machine body guides, 2 at the top, and 2 at the bottom of main guide. • Carriage rollers from INA, on on the regulated cam, • Heavy body of the machine (steel plates 10 mm thick), build in cell design, • Electric cabinet on Shneider components, Cgedpjd Tc Haefx Ab Uer • Secure cover of the grinding wheel with magnetic interlocks, • User manual and control panel menu in Polish / English / German / Czech / Spanish / French, • Machinery LED lamp in working area, UPON REQUEST: • Different types of knives mounting, • Coolant cleaner with automatic paper filter, • Main grinding motor can be 5.5 kW, 7.5 kW and 11 kW, • The knife sharpening machine model GRAFS GR can be supplied in 4 different grinding lengths: 1.200 mm, 1.800 mm, 2.100 mm and 2.400 mm. • Accordion covers on whole body of the machine, • Mist collector, We provide an European Declaration of Conformity and all documents. The machine is new, we are a producer from Poland, we provide after sale support and service with 12 month's warranty.