Condition: used, machine/vehicle number: 008192, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes Gkolhcdwjx A E Szo Iof No. Operating units: 3 Nr sectioned swab: yes

Condition: excellent (used), Grinding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Condition: unused -Type: G 6 x 22.5 -consisting of: base body, rubber hose, air valve, 2 clamping caps for rubber hose -Diameter: 60 mm -Grinding length: 200 mm -Length of base body: 225 mm -Holding bore: 30 mm -Number: 14 available Price: per piece -Available: on request in other sizes: e.g. diameters 40 mm, 60 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm Also available as brush grinding elements. Geleb A S Rfehcdw Iokf Furthermore, we also carry general husband spare parts. Price of grinding drums is shown in the attached PDF file.

Condition: used, Used machine Gkslhex Hbr Ijcdw Ijf Year of manufacture: 2022 Also suitable for small craft businesses for occasional use Combination sanding unit with sanding shoe for fine sanding Standard equipment includes inclined-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust mono-block steel machine body with tube reinforcement, robot welded, with work units mounted high for maximum rigidity Motorized height adjustment of the worktable with digital display Electronically controlled sanding belt oscillation Feed carpet driven by gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers in front of and behind each work unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universal application for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Maximum working width: 950 mm Equipment details: Combination unit for calibration and sanding Inclined-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite backing Universal design for calibration and sanding work on solid wood, chipboard, and veneer Sanding belt length: 1525 mm Sanding belt width: 970 mm Feed speed: 4.5/9 m/min Workpiece height: min. 4 mm / max. 170 mm Motor: 7.5 kW Extraction port: 140 mm Dimensions (LxWxH): 1388 x 1545 x 1668 mm Availability: Approx. end of January 2026 Location: NRW

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa Gelhcox Ex Tmjdw Iokf - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Gkelhcdwexlt Ebo Iof

Condition: used, Year of construction: 2002, Width 1100 mm 2 bands 1 skate Gjlhex El Hyocdw Iskf 1 rubber roller 2 steel rollers 11 kW motor Digital display Low electrical ascent Electronic conveyor belt advancement variator 380 V Price sold as is, without cleaning or overhaul

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Golhcdsx A Tfiew Iekf Min. machining thickness: 100 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, Lightweight edge sander BGU Type KS 226 for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2.250 mm Sanding belt width: 150 mm table: swiveling engine power: 1,5 kW Suction nozzle: 100 mm Gslhcdjwcry Ujw Iokf

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2022 Length (product) approx.: 1350 mm Width/Depth (product) approx.: 585 mm Height (product) approx.: 1210 mm Weight (net) approx.: 162 kg Extraction nozzle diameter: 100 / 100 mm Longitudinal table length: 680 mm Longitudinal table width: 310 mm Height adjustment, longitudinal table: 130 mm Min. cross table height: 920 mm Connection voltage: 400 V Phases: 3 Ph Power type: AC Mains frequency: 50 Hz Power input: 2.1 kW Fuse protection: 10 A Abrasive belt length: 2270 mm Abrasive belt width: 150 mm Belt running speed(s): 16 m/s Sanding surface length: 770 mm Sanding surface width: 150 mm Gkslhcox Hbrzodw Ief Availability: approx. end of January 2026 Location: NRW

Condition: excellent (used), CATALOG NUMBER 7850 Technical data: - Max. workpiece width: 1100 mm - Max. workpiece height: 160 mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic segmented shoe + 2 grooved rubber rollers - Motor power: 15 kW - Brake From above: Gelhcdwex Hhy Se Iskf - Divided rubber feed roller - Unit - Divided rubber feed roller - Unit with segmented shoe - Divided rubber discharge roller - Cleaning brush From below: - 2 metal feed rollers, slip type - Feed belt - 2 metal discharge rollers, slip type - Pneumatic belt oscillation with photocell - Electric table elevation - 2 feed speed settings - Feed motor: 0.75 kW - Grinding thickness potentiometer - Operating pressure: 8–10 bar - Extraction port diameter: 3x165 mm - Overall dimensions (L/W/H): 1900 x 1700 x 1930 mm - Weight: approx. 1502 kg ADVANTAGES - Italian manufacture, SCM brand - 2 working units - Grinding thickness potentiometer - Never repainted - Technical documentation (DTR manual) - Used sander, in very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of major exchange rate variations, price may change)

Condition: new, Year of construction: 2025, max. working width 300 mm number of brushing / polishing units 2 st. Feed speed 10 m/min. Max. diameter of brush / polishing rollers 190 mm Gkslhjv Ucilscdw Ijf motor power per brush / polishing roller 4,65 kw

Condition: used, grain size: 180 Golhcdwsw Dn Nus Iskf width: 1.250 mm

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Comfort features: • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term Golhcdjuhiq Dew Iokf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2260x2060x2230 mm weight 3700 kg total power requirement 57,1 kw Gkelhcsv Dmtmodw Ijf

Condition: used, Lightweight edge sander Jet type EHVS-80 cs for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2260 mm Sanding belt width: 150 mm Gkelhcdowffpbew Iof table: Pivotable engine power: 1,5 kW Suction nozzle: 100 mm

Condition: used, Year of construction: 2011, Used Machine Year of manufacture: 2011 WEBER LCE-2-1350 (DK) Compact Wide Belt Sander with two sanding belts, suitable for calibration, veneer, and intermediate lacquer sanding. Features a constant working height and is equipped as follows: Gkslhcdwjx Hll Es Isf Sanding Units: Contact Roller Unit · Grooved steel contact roller Ø 210 mm for precise calibration · Mechanical adjustment of the contact roller for grit compensation · Pneumatic lifting of the contact roller Combination Unit · Grooved rubber contact roller Ø 130 mm, 60 Shore hardness - mechanical adjustment for grit compensation · Pneumatic lifting of the contact roller · Electronically controlled sanding pad with ISA-System 22/22 ISA (Intelligent Sanding Pressure Adjustment) · Patented segmented pressure beam system with full tolerance compensation · Pressure shoe width: 22 mm (movable longitudinally and laterally) · Universal lamella with pinpoint actuation suitable for all sanding applications (no need to change sanding lamella between veneer and solid wood sanding) · Tolerance compensation: +/- 1 mm ISA-Control · High-resolution workpiece detection with a switching roller per pressure shoe · Free feeding of complex part shapes – multiple feeding with minimal lateral spacing · Sanding intensity individually adjustable at all edges · Sanding pressure adjustable via pressure regulator · Feed-controlled infeed and outfeed Drive · Sanding belt speed from 2–18 m/s for high material removal rates · Wear-free DC braking · Self-tensioning belt drive Belt Control · Automatic compensation of unequal sanding belt edge lengths · Optical, contactless, and self-cleaning sanding belt detection on the belt change side · Fine adjustment of oscillation on the belt change side · Belt run-off switches left and right Operator Terminal ‘SIEMENS’ MP 177 6” · Graphical user interface via 6” color display · Program memory for 18 programs · Parameter settings available via program Overthickness Protection · Safety bar at machine infeed with the following functions: · Automatic lifting of contact roller and segmented pressure beam · Feed shutoff Workpiece Feed · Rubber-coated and spring-loaded pressure rollers before and after the sanding station · Secure workpiece transport with multiple feeding ensured by pressure lamella with tolerance compensation · High-quality transport belt made of natural rubber · Infinitely variable feed speeds for calibration and fine sanding · 400 mm table extension at both infeed and outfeed with rollers Technical Specifications · Working width: 1350 mm · Sanding unit drive (frequency controlled): 1 x 15.0 kW Availability: Approx. April 2026 Location: Heidelberg

Condition: used, The KED Ehemann Type S10 box sander, also known as a drawer sander/drawer fitting machine, is designed for sanding entire (e.g., dovetailed) solid wood boxes or other cube-shaped workpieces. It can also be used as an edge sander and includes a set of sanding belts. Grinding surface: 750 x 230 mm Gkslswtz Sbshcdw Ief workpiece width: approx. 100 - 950 mm Sanding belt dimensions: 2,360 x 250 mm engine: 2 x 7.5 kW oscillation: Yes

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation Gkslhcswkbcbsdw Ief - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: used, Johannsen T 94 long-belt sander for precise sanding of solid wood and veneer surfaces. The machine is ideal for joineries and high-end interior finishing and, thanks to its robust construction and sensitive belt control, ensures a consistent sanding pattern. Includes a large supply of sanding belts. Grinding length: approx. 2,600 mm Grinding width: about 850 mm clearance height: approx. 340 mm height adjustment: electrical engine: 4 kW Gslhcoxtbvdsdw Iokf LBH: approx. 4 x 2.2 x 1.5 m mass: about 700 kg

Condition: used, 2 belt cross sander Heesemann MFA 8 for intermediate sanding of varnish and sanding of wood panels and other workpieces. Gelhcdwsxr N I Eo Ijkf working width: 1300 mm Clearance height: max. approx. 140 mm clearance height: max. approx. 140 mm Aggregate 1: cross-section Unit 1: Electronic print bar Aggregate 2: longitudinal grinding Unit 2: Cross-section Unit 3: longitudinal grind Unit 4: cleaning brush

Condition: used, engine: 2,2 kW Goljlfdxujhcdw Ijkf Spindle length per side: 175 mm · Spindle diameter max.: 35 mm spindle diameter: 35 mm Carstens bench grinder for grinding and polishing wood and other materials with two spindles. · Dimensions LxWxH approx.: 1,750 x 700 x 1,100 mm · Further technical data on request

Condition: used, sanding belt: 300 x 1010 mm engine: 2,2 kW Drum sander or belt sander KED II HDZ for sanding wood and other materials. · Dimensions LxWxH approx.: 1,050 x 600 x 1,000 mm Gksljlfdxxehcdw Isf

Condition: used, Loeser S0 profile sanding machine for sanding profiles using templates. The sanding belt is guided over the profile wheel/template and transfers the shape to the wood, which is manually guided through the machine. · Workpiece size LxWxH max. approx.: 500 x 300 x 100 mm · Extensive accessories motors approx.: 2 kW Gjlhelfdxiscdw Iokf Motors each approx.: 2 kW

Condition: used, · Spindle diameter: 45/35mm Gjlhcolfdxmsdw Iekf Clamping length per side approx.: 450 mm Double sanding block Langbein with left/right mode for woodworking.

Condition: used, Year of construction: 2017, Double-sided (top/bottom) grinding machine Stähle Hess Saturn Roto Finish for fine grinding of window scantlings or other woods. Two units, each with several surface-grinding, rotating tools, which also rotate around their own axis with the grinding unit and thus achieve cutting of the wood fibers with easy adjustment of the wood type. Application e.g. as a grinding machine after a planing machine in a window production facility. Gjlhcsxwtwusdw Iekf Technical specifications: see PDF Working width max.: 240 mm Max. wood height: 140 mm Wood height max.: 140 mm