Used Wide belt sanders 1200-1299mm working width for sale (10)

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Ncslhccqsv A Ta Djmjr Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4630x3005x2334 mm Weight 12160 kg Nelhccev A Hfteqmecr Total power requirement 135,6 kw

Condition: used, Year of construction: 2024, motor voltage: 3x 400 V, sanding height: 3 200, 2 motors each 11.0 KW, 1 motor with 15 KW, sanding width 1350 mm, touchscreen control 15", constant infeed height fixed table with 900 mm, feed speed infinitely variable from 2.8 20 m/min, ESC workpiece detection sensor with 50 segments, 27 mm segment width, LACK cross sanding unit , contact roller unit with grooved sanding roller D= 250 mm, LACK superfinishing unit , Vacuum table with 4KW blower, Optimized control software for special work "corners/angles", "Scotch Brite" brush device at machine outlet D = 150 mm, Oscillating cleaning blower for workpiece and feed carpet, Ionization bar at machine outlet, Switch contacts for slide control Nslhcsunvdlecqmocr

Condition: used, Year of construction: 1996, Price: On request BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nceljv Ukdwehccqmsr Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2000, Working width .- mm With 1 sanding unit consisting of:- combination unit with electronic shoe for lacquer sanding- lacquer sanding- dust brush- roller table at infeed 270 mm- program control electronic f. 50 programswith brand-new feed carpetusedmake Bütferingtype Classic 111 Cyear of construction 2000machineNo. 63608Working width 1100 mmPassage height 160 mmCE type-testedGS wood dust testedBelt dimensions 1120 mm x 1900 mmFeed speed 4 8 m/min.1 piece combi unit 3.7/7.5 15 kW , 3 belt speeds with autom. steel rollerdiameter 130 mmbelt speed approx. 4,5 9 18 m/selectronic link shoesegment pitch 50 mmfor lacquer sanding workpiece controlledstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Ncslhccsvwfl Usqmor

Condition: used, Year of construction: 1994, Functionality: fully functional, machine/vehicle number: SA002264, working width: 1,300 mm, working height: 160 mm, power: 18 kW (24.47 HP), height adjustment type: electric, type of input current: three-phase, table height adjustment: 160 mm, input frequency: 50 Hz, input voltage: 380 V, frequency: 50 Hz, DMC EUROPA 130 Calibrating Sander Powerful machine, requires sanding the carpet for grip Ncslhccqov Ia E Rsmor

Condition: used, Year of construction: 1983, WIDE LOWER BELTS SANDER Brand: DMC Type: I-C-LCL 130/RP-S Serial number: 57-114-83 Year: 1983 CAPACITIES Width of the workpiece: 20 to 1300 mm Height (thickness) of the workpiece: 3 to 110 mm Nelhccsrx Tc Ieqmscr Length of the workpiece: from 200 mm Feed speed: 6.5 to 20 m/min Average speed of the abrasive belts: 25m/sec COMPOSITION OF THE MACHINE: - 3 rollers at the inlet and outlet - Feed belt above Variable feed speed - 1st belt on rigid rubber cylinder - 2nd triangular belt on 2 metal cylinders and central pad - Motorized brush at the outlet - Belt blowers - Electric up and down Digital display of pass height OTHER CHARACTERISTICS: - Power supply: 380v+N+T - Installed power: 35KW - Pneumatic supply 5-6 bars average consumption 600l/min - Suction 2 x Ø200mm recommendation: 8100 m3/h Transport dimensions: 2300 x 1750 x h.2250 mm Weight: 900 kg Machine offered as is, loading included.

Condition: excellent (used), Belt sander - a highly efficient machine for processing furniture boards, wood, plastics and metal. - Ideal for pre- and final preparation. - It has unlimited possibilities of paper gradation adjustment - Sliding belt table and its adjustment make it possible to grind material up to 100 mm thick. - The machine is equipped with a dust extraction system from the inside after connecting with pipes fi 100 mm to industrial vacuum cleaners, dust extractors, etc. - The machine does a great job as a rough pick-up machine for the top layer of material. Ncslhemrqlnsccqmjr -Belt table conveys material under 2 sanding belts. - Adjustment of the thickness of the material is done by adjusting the table and is carried out through a panel with a digital display. - The rotations of the tape drive shafts are smoothly regulated by potentiometers through inverters, which gives extremely precise control of each shaft. - The working width is 1300 mm.

Condition: used, Year of construction: 2024, 3 units, , 2 motors each 11.0 KW, 1 motor with 15 KW, sanding width 1350 mm, , , sanding height 3200mm, , constant infeed height fixed table with 900mm, , control unit with 15" touch colour screen 100 program memory locations, , ESC workpiece detection sensor with 50 segments, 27 mm segment width and synchronization with any, feed speed, , LACK cross sanding unit incl. segmented, electronic-pneumatic sanding pad ESC, segment width 27 mm incl. quick-change system chevron sliding belt between, sanding pad and sanding belt for homogeneous sanding without oscillation marks Variable, pressure control on the operating side Electropneumatic sanding belt oscillation, , contact roller unit with grooved sanding roller D= 250 mm, electromot. Positioning-controlled grit adjustment in 1/100 mm range via display, , 2nd sanding drum in 85° Shore, , LACK superfinishing unit incl. segmented, electro-pneumatic sanding pad, ESC segment width 27 mm, The superfinishing unit has an additional chevron belt in addition to a segmented, electro-pneumatic link sanding pad. This sliding belt enables even gentler sanding pressure to be applied to the workpiece and is mainly used for sanding painted workpieces and high-gloss materials, , 2nd motor 15kW, 15kW soft start, , Vacuum table with 4 kW (5.5 hp) blower integrated in the machine stand, , "Scotch Brite" brushing device at the machine outlet, Ø 150 mm, incl. brush, Stained workpieces in particular retain their grain better, , Oscillating cleaning fan for workpiece and feed carpet, cleans the workpiece and the feed carpet of sanding dust, , Ionizing bar at the machine outlet, This is used against static charging of the workpiece surface so that it can be processed in the best possible way. Ncolhccjv Iclmsqmor

Condition: new, - NEW -GENERAL FEATURES:machine frame and worktable* steel structure with electrical cabinet at the front of the machine* sanding belt infeed from the left side of the machine* motorized table height adjustment* main motor integrated in the machine frameelectrical equipment* electromechanical control panel on the front left side of the machine* automatic star-delta start for the main motor* motor protection switch for the motors* motors in insulation class IP 54emergency and protective devices* Safety microswitch for excess thickness* Automatic brake for immediate stopping of the units* Emergency stop safety edge in the workpiece infeed* Mushroom switch in the workpiece infeed and outfeed* Lockable main switch* Automatic emergency shutdown of the machine in the event of:- sanding belt breakage- untensioned sanding belt- protection against lateral movement of the sanding belt- lack of compressed air- overload of the main motorsNote: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list).BASIC MACHINE STANDARD EQUIPMENT- R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos.- R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos.- Hard sanding pad with manual adjustment of the working height- Main motor 11 kW (15 HP)- Electronic ammeter for the main motor to display the power consumption- Electronic display of the working height- Electronically controlled sanding belt oscillation- Rubber pressure rollers- Kickback protection in the infeed in front of the first unit- Rubber feed carpet 60 Sh- Roller table with two rollers in the infeed and outfeed of the work table- Carpet feed with two speeds 4,5 / 9 m/min withgeared motor- automatic carpet centeringworking width mm 1.100Min./Max. working height mm 4 - 170Sanding belt width mm 1,115Sanding belt length mm 2,150Main motor power kW (HP) 11 (15)Gear motor kW (HP) 0.45/0.8 (0.6/1.1)Feed speed m/min 4.5/9Consisting of:10.90.87 European Safety Regulations(Mark C.E.)93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz44.44.19 Version "B" for RCS33.31.50 Roller table in infeed and outfeed for long workpieces62.44.50 10" control panel with "eye-S" software integration31.21.60 "RA" inclined ribbed steel contact roller - 1st unit97.50.71 Main motor 15 kW (PS 20) Ncelhccsvwfrneqmer