Used tenoners / tenoning machines for sale (24)

Condition: used, diameter of hob max. ca. 340 mm Gslhccqjwnmx Noqetu Cutting height ca. 80 mm ca. 1.300 mm

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine. Gtjlhcexrpkmecqqsu

Condition: used, Year of construction: 2003, Double-sided tenoning machine with automatic feeder Technical Features - Production: Up to 2400 pcs per hour - Produccition: very high outputs (2400 tenons / hour) - Speed of the axles portafresas: rpm 9000 - Max. length of the pins at any inclination: mm 100 + 2R - Max. shank depth with standard tool: mm 40 - Min. Shank depth with standard tool: mm 10 - Maximum spike thickener: mm 25 - Power axle carrier motors (nr. 2 of 4HP): HP 8 Gjlhccqexrc Hzeqstu - Motors for rotation (N. 2): HP 2 - Motor power right group movement: HP 1

Condition: good (used), Year of construction: 1995, machine/vehicle number: 288.I.8, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. Golhovvvr Asccqqotu USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine. Spindle diameter: 25 mm Spindle length: 70 mm Connection diameter: 2 x 100 mm Central lubrication Automatic or manual operation Automatic material loading and discharge Min./max. element length: 199.5 mm / 2030 mm (dimension A) Element thickness: 100 mm Width: 90 mm Unit adjustment range (B and F): + 92° / - 27° Unit angle adjustment (D and H): + 45° / - 20° Unit angle adjustment (E and M): + 45° / - 10° Spindle height adjustment (C and G): + 62° / - 5° Joint height and width adjustment Spindle angle adjustment: 0° - 90° (vertical journal) Cycle speed adjustment

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Golhevvi Tyoccqqstu Storage location: Customer

Condition: used, used, good conditionmake Festotype ZA 101machine-No. 2668/SNumber of spindles 3 crosscut sawClamping height 1 x 140 mm 2 x 30 mmCrosscut saw 2,5 HPFence ruler LAS 1750 mm 1000 mm with turret stopWorkpiece clamping pneumaticSpace requirement approx. 1700 mm x 700 mm x 1400 mmPlace of storage 97447 Gerolzhofen, free loaded, unpackedDelivery in as-is condition, as inspectedwithout warranty and guarantee Gelevwffzehccqqstu

Condition: new, weight of the machine ca. 392 kg Gtelhjvwgfvsccqqou

Condition: good (used), Year of construction: 1975, REX Tenoning and Mortising Machine Model ZS-400 Year of manufacture: approx. 1975 with tiltable crosscut saw 2x45° and 2 spindle speeds for the mortising spindle Technical data: - Max. clamping height of mortising spindle: 170 mm - Max. workpiece width (mortise length): 500 mm - Max. cutting length (edging length): 1000 mm - Max. tenon length (with 400 mm Ø tool): 170 mm - Max. tool diameter (mortising spindle): 400 mm - Max. tool diameter (crosscut saw): 350 mm - Distance between tool spindles: 580 mm Crosscut saw: - Tiltable 0-45° - Lateral adjustment: 0-240 mm - Height adjustment: 0-200 mm Gtslhccqsx S Hfkeqou - Standard cutting height: 110 mm - Saw shaft diameter: 30 mm - Drive motor: 2.3 HP - Speed: 3000 rpm Mortising unit: - Spindle dimensions: Ø40x170 mm - 2 speeds: 3000/4500 rpm - Drive motor: 7.5 HP - Foot brake Sliding table: - Height adjustment: 0-100 mm - Table size: 300x800 mm - Table top movable towards the tool - Quick-action workpiece clamping - Net weight: approx. 650 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1760x1150x1320 mm Gelhcsv A Hykecqqotu Weight 1100 kg Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x1300x1780 mm Gjlhccevz Egyeqqotu Weight 1000 kg Total power requirement 5,5 kw

Condition: used, Square Mortise Drill, 4-sided Mortiser Chain Mortiser, Tenon Mortise Machine MAKA (Max Mayer) TYPE ED 30 Serial No. 3130 Tenon width: 75 mm Throat depth: 0 to 75 mm (without wood plate) Hand lever stroke: approx. 125 mm Max. clamping width: 140 mm Chisel width: 8 mm Speed: 2800 rpm Motor power: 0.3 kW Power connection: 380 Volt, 50 Hz - Adjustable mortise stroke via eccentric shaft - Depth feed via hand lever - Mortiser adjustable up to 75 mm via threaded spindle - Quick-release lever for clamping device - Double column guide, robust design - Suitable for mortising rectangular holes for tenon joints Dimensions (L x W x H): 420 x 360 x 400 mm Net weight: 38 kg Gtjlhjxw Rbdoccqqsu Very good condition

Condition: good (used), functionality: fully functional, Tenon cutting machine, tenoning machine Manufacturer: Helma Type: 9461 Spindle: 30 mm Motor: 4 kW / 9000 rpm Gjlhcex E Ap Sscqqstu 2 workstations Hydraulic 2 top pressure cylinders Hydraulic table movement

Condition: good (used), Mafell Tenon Milling Machine ZAF 160 – Professional Tenoning Machine For sale is a Mafell ZAF 160 tenon milling machine, ideal for carpentry workshops, timber construction, and restoration companies. This machine enables highly precise tenon joints, even with large timber cross-sections and angled cuts. Technical Specifications Maximum timber dimensions: - Right angle: 320 × 160 mm - Tenoning at 60° angle: 160 × 160 mm - Flattening (ridge/hip joints, etc.), right angle and up to 45° angle: 230 × 160 mm Clamping of the workpiece: manual Setting of tenon dimensions: manual via scale Variable tenon length: up to 110 mm Flattening in a single operation: max. 110 mm Flattening width: max. 160 mm Working height: 750 mm Support with scale (length stop): 3 m Motor: Gjlsx D Az Nehccqqstu - Three-phase 400 V / 50–60 Hz - Input power: 6000 W - Output power (nominal load): 4500 W - Milling head speed: 6670 rpm - Cutting speed: 32.8 m/s - Feed speed: approx. 2.2 m/min Tool dimensions: - 100 × 110 mm, carbide-tipped - 165 × 40 mm, carbide-tipped + carbide-tipped fiber knife Extraction: - Connection: 2 × 100 mm diameter Space requirements: approx. 400 × 140 cm Weight: approx. 380 kg You will receive an invoice with VAT stated separately. Price: €10,500 net

Condition: good (used), Code: 0060 Brand: SAOMAD Model: UTP 150/6 - CE Standard Tenoning machine for wooden frames, doors - CE Standard Gjlhcjv Hqfxocqqstu Technical data: Circular saw unit: Blade diameter mm 400 F30 - Motor Hp 4 - Cutting height mm 125 - Horizontal shifting mm 150 Cutterhead unit: Cutterheads lenght mm 150 - Max opening between cutterheads mm 185 - Cutterheads diameter mm 160 - Motor Hp 3 - Horizontal cutterheads adjustment shaft tenoning unit: Shaft diameter mm 35 - Useful working length mm 160 - Motor Hp 5,5 - Vertical and horizontal adjustment - Max tool diameter mm 320 Manual tilting tenoning carriage mm 600 x 600 Pneumatic workpiece holders Inclinable graduated fence +/- 45° Sliding safety guards N° 3 suction ports diameter mm 140 N° 1 suction port diameter mm 80 Compressed air 6 atm Overall dimensions mm 3550 x 1400 x 1600 h

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x1400x1700 mm Weight 1950 kg total power requirement 11,4 kw Gslhccqovz Euweqetu

Condition: ready for operation (used), Brand: Bacci Model: Brevettata SM 787 Gslhetu Ivnsccqqetu The work table can be tilted and is adjustable in height. Motor: 2.2 kW, 50 Hz, 380 V, 3-phase Size for transport: 160x120x145 cm (lxwxh) Weight: 800 kg Stock no: 2002057

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. Gtjlhswazn Aoccqqeu -No wood waste – fully vacuumable.

Condition: used, Cross-cut saw motor 1.8 kW Milling motor top 1.8 kW Milling motor bottom 1.8 kW Gtolhccqeq Auzajqju Sliding table with Superfix manual clamp Saw blade 2 slitting discs

Condition: used, 1x saw pneumatic adjustable 2,5 hp Gtolhccqeigabxeqou 1x tenon cutter shaft 6 HP 1x grooving cutter shaft 6 HP pneum. Clamping with foot valve sliding table stop + extension

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Crosscut saw diam. 300 mm Milling spindle diam. 40 mm sliding table with Festo length stop suction nozzle saw 120 mm dto.cutter 140 mm cable + plug 16 Amp, Gelsiau I Sohccqqetu without operating tool Unfortunately, we can not answer inquiries without complete contact information.

Condition: used, Bacci Double Rounding Tenoning Machine with Loader Gtjlhcopk Ta Recqqsu

Condition: used, Bacci TSD Double rounding tenoner, with loader. Gtjlhjxlb Hyoccqqou Max length of pieces mm. 1300

Condition: used, Year of construction: 1993, 1993 Bacci TSD-E Automatic double rounding tenoning machine Gtjlhccqoxbghzjqou Tested, working.

Condition: used, Year of construction: 1999, 1999 Bacci TSD-E Automatic Double Rounding Tenoning Machine. Tested. Golhccqsxbf Uyjqjtu Monitor on dashboard not working, use external monitor (standard PC connector)