Used Wide Planer for sale (7,282)

Condition: excellent (used), CATALOG NUMBER: 7503 TECHNICAL DATA: - max planing width 610mm - max planing height (two-sided) 200mm - max planing height (four-sided) 100mm Top: - 2 rubber feed rollers - 2 toothed feed rollers - metal feed roller Ndodpfjzr Ixcex Akqoc - geared feed roller - pawls - pressure roller - 2 geared feed rollers - pressure roller - planing shaft 610mm, 4-knife, 7.5kW - pressure roller - smooth, metal feed roller - pressure roller - profiling shaft 7.5kW - pressure roller - rubber feed roller Bottom: - planing shaft, axis 35mm, axis length 130mm, 2.2kW - 2 guide strips - feed table - smooth feed roller - planing shaft 610mm, 4-knife (2 knives installed), 7.5kW - 2 smooth feed rollers - split, metal slip roller - side pressure roller Rear: - side spindles + 2 pressure rollers - 1) vertical right 95mm, 4kW - 2) vertical left 95mm, 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - adjustable rollers in the lower table - electric thickness setting - 6 feed speeds 7/9/11.5/14/18/23 m/min - feed motor 3.1kW - dust extraction port diameters 3x120, 3x160mm - dimensions (L/W/H) 3150x1900x1600mm - weight approx. 3500kg ADVANTAGES: – best wide-belt planer for wet and dry wood – ideal for processing timber, flooring, etc. – additional profiling shaft and planing shaft (undercutter) – 4 horizontal planing shafts + 2 vertical spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations)

Condition: ready for operation (used), Planing machine constant table Planing width max. 605 mm Planing height 2-sided 200 mm Planing height 4-sided 200 mm Feed rate 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed rate up to approx. 50 m/min Motors Planing shaft, lower 7.5 kW Planing shaft, upper 11.0 kW Vertical spindle, right 11.0 kW / D 40 mm Vertical spindle, left 11.0 kW / D 40 mm 5th shaft, horizontal 15.0 kW Feed 2.4 / 3.0 kW Power 1.1 kW Planing shafts with 6 knives For feed rates up to 24 m/min, 3 knives are sufficient 3 knives are in operation, and 3 sharp knives are in reserve Additional unit: 5th working shaft, horizontal, 15 kW Outfeed unit: roller width 350 mm Machine sold in condition A, B, or C A) repaired B) repaired and with new electrical system Ndsdpfowg S Tvjx Akqoc OPTION Pre-sizing unit at the machine infeed with planing head width 200 mm and motor 3.5 kW

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH30 Four-sided planing machine with additional unit: horizontal work spindle and extraction unit 4-sided universal planing machine KUPFERMÜHLE Electrical system: 400 volts / 50 Hz / 58.5 kW Paint finish: original Reseda green RAL 6011 Motor power and arrangement (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle, bottom: 11.0 / Feed: 7.5 / Power: 3.0 Feed speed min/max: 5 – 30 m/min Work spindles: 5 pieces Discharge/extraction port: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Nsdpfxsx Ehfco Akqsdc Working width min/max: 30 mm / 310 mm Working height min/max, 2-sided: 15 mm / 300 mm Working height min/max, 4-sided: 15 mm / 180 mm (OPTION 250 or 300 mm) Key features: Constant table height Guide rail on the RIGHT Planer heads for quick change Jointing device at the bottom and top Table plates slotted for sound insulation and are replaceable Extraction unit with 2 driven rollers at the top and double-sided guided upper part Height adjustment synchronized with the base machine Machine in repaired and tested condition with functional guarantee Additional options: New paint finish Repainting Overhaul etc.

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 10,000 kg, input voltage: 380 V, Equipment: cabin, Lamellar planing machine 310 x 200 mm + saw spindle Njdpfox Exbdsx Akqedc

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. Njdpfsqlckpox Akqedc reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Nedpfx Ajqlck Nokqjdc Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1998, functionality: fully functional, planing height: 250 mm, working width: 410 mm, overall weight: 5,500 kg, Planer REX TIMBERWORK 410x250 mm + 4x chamfers + saw spindle Year of manufacture: 1998 Location: France, Savoie Ndedpfewmm Alsx Akqec

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Ndedpfol Dw Nxox Akqjc cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm Ndodpfx Aoi Apuhokqjc - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: ready for operation (used), KUPFERMÜHLE DOMA-g-1620-V44 Four-sided planer with constant table height for varying wood thicknesses Working width max. 1620 mm Planing height, 2 sides max. 300 mm Planing height, 4 sides max. 240 mm (OPTION: can be converted to 300 mm) Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW bottom left 15.0 kW Nodpfxjzlbz Rj Akqsdc top right 18.5 kW top left 18.5 kW 2 vertical milling units x 7.5 kW with mounted aluminum planing heads H 240 mm Machine mounted on a rotary bearing Wood widths up to 820 mm can be planed with energy efficiency with 1 motor at the bottom + 1 motor at the top good technical condition of the machine with functional guarantee year 1981 last inspection by the manufacturer in 2025

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: B-0312, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 920 mm, total length: 10,000 mm, table length: 3,200 mm, table width: 2,050 mm, total width: 6,400 mm, spindle speed (max.): 8,000 rpm, total height: 4,700 mm, distance between stands: 2,700 mm, type of input current: three-phase, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, overall weight: 36,000 kg, spindle mount: MK 5, spindle motor power: 21,000 W, CNC Gantry Machining Center VISION WIDE VTEC VF-3026 We are offering for sale an advanced, heavy-duty, large-format Vision Wide VTEC VF-3026 gantry machining center. The machine was manufactured on September 15, 2008. Designed for precise and high-performance machining of large molds, dies, and heavy steel and cast iron components. Featuring a renowned Heidenhain iTNC 530 control and extensive, progressively added equipment (two factory heads, probe, CTS), the machine provides significant production capabilities, excellent rigidity, and machining dynamics. Njdeztzl Sspfx Akqodc GEOMETRIC PARAMETERS AND WORK AREA: Table dimensions: 3200 x 2050 mm Travel in the X-axis: 3200 mm Travel in the Y-axis: 2600 mm Travel in the Z-axis: 920 mm Maximum table load: 11,000 kg (11 tons) Clearance between columns: 2700 mm Distance from the spindle nose to the table: 150 - 1070 mm SPINDLE AND DRIVE SYSTEM: CNC control: HEIDENHAIN iTNC 530 Series Spindle motor power (Heidenhain): 18 / 21 kW (high torque) Spindle taper: ISO 50 / BT-50 (compatible with P50T-1 pull studs) Maximum spindle speed: 10,000 rpm Minimum spindle speed: 50 rpm EXTENSIVE PREMIUM EQUIPMENT (INCLUDED IN THE MACHINE PRICE): Automatic 90-degree tilting head, indexed every 5 degrees (Year of manufacture: 11/2011) – a modern accessory dedicated to efficient side machining. Maximum head speed is 3000 rpm. Wireless Heidenhain workpiece measuring probe – a radio measuring system integrated with the machine, enabling automatic referencing and dimension control directly on the machine table. Extension head / Spindle extension (Model: VF-3026AC, Year of manufacture: 09/2008) operating at a maximum speed of 4000 rpm. Through-spindle cooling system (CTS - Coolant Through Spindle) – a high-pressure coolant delivery system directly through the tool. AUTOMATIC TOOL CHANGER (ATC): Magazine capacity: 40 positions Tool holder type: BT-50 / CAT-50 Maximum tool weight: 18 kg Maximum tool length: 450 mm Maximum tool diameter: diameter 125 mm (diameter 215 mm with adjacent empty slots) STANDARD EQUIPMENT: Spindle cooling system Dual chip removal system: screw conveyor and belt conveyor Remote manual pulse generator for the operator Work area enclosure and work lighting Automatic lubrication system and Auto Power Off function Air blast through spindle Heat exchanger in the control cabinet Matching transformer Complete technical documentation and electrical diagrams DIMENSIONS AND POWER SUPPLY: Power consumption: 60 kVA (Three-phase AC power supply) Machine weight (net): 36,400 kg (36.4 tons) Overall footprint dimensions: approx. 10,000 x 6,400 x 4,700 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Vision Wide Vision gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,530 mm, and Z-axis travel of 750 mm. The spacious work table size of 2,000 × 1,530 mm makes it ideal for large, flat workpieces. If you are looking to get high-quality milling capabilities, consider the Vision Wide Vision gantry milling machine we have for sale. Contact us for further details. • Highlights: • Modern machine (2016) designed for low maintenance and easy integration into production lines Ndodpfxszqc A Te Akqsc • Large work envelope suitable for large, flat workpieces (mold making, aerospace, mechanical construction) Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Ndodpozagkzjfx Akqec Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: excellent (used), Year of construction: 2002, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: A20430 RC1, feed rate Y-axis: 512 m/min, total width: 2,480 mm, total height: 2,500 mm, total length: 3,660 mm, working width: 1,650 mm, grinding width: 1,650 mm, grinding height: 200 mm, working height: 200 mm, table height: 780 mm, height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 75 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 200 mm, table length: 3,400 mm, table width: 1,650 mm, input frequency: 50 Hz, input voltage: 380 V, workpiece width (max.): 1,800 mm, Calibrating machine with integrated PC-based adjustment and color touch screen. Ndsdpfx Ako Aduaneqsc Two rubber rollers plus a third buffer roller. Used machine, operated on a non-intensive cycle, solely for sanding spruce (soundboards for pianos, harps, and other small musical instruments). On average, it has been used for 5-6 hours/week – 230 hours/year. Feed conveyor belt in perfect condition (replaced). Operating and maintenance manuals AVAILABLE.

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Nsdpfxe Aazaao Akqjdc VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 2,100 mm, total height: 2,100 mm, Year of manufacture: 2000 Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 370 x 210 x 210 cm - Details: - └ Description: Various repairs are needed - Year: 2000 - CE marking present: Yes - Serial number: 30728 Nsdpfsz Tqznox Akqodc - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Tool present: Yes - └ Spindle 5: - - Spindle type: Top - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Tool present: Yes - Max. planing width [mm]: 260 - Min. planing height [mm]: 0 - Max. planing height [mm]: 140 - Feed table length [mm]: 860 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 141 - Fuse [A]: 160 - Power [kW]: 65.0 - Transport dimensions: 3700mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 2,100 mm, total height: 2,200 mm, Year of manufacture: 2000 Colour: Beige Empty weight: 6.000 kg Dimensions (LxBxH): 710 x 210 x 220 cm - Details: Nodpfx Aj Aazvhekqjdc - └ Description: The first planer shaft is 260 mm - Year: 2000 - Documentation available: Yes - CE marking present: Yes - Serial number: 88961 - Number of spindles [pcs.]: 10 - └ Spindle 1: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 2: - - Spindle type: Right - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 4: - - Spindle type: Right - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 5: - - Spindle type: Top - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 6: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 7: - - Spindle type: Top - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 8: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 9: - - Spindle type: Top - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - └ Spindle 10: - - Spindle type: Top - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 8000 - Min. planing width [mm]: 10 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 1975 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.5 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Options: Powered rollers in table - Feed speed: Manual - └ Min. feed speed [m/min]: 4 - └ Max. feed speed [m/min]: 24 - └ Feed speed control: Continuously adjustable - Voltage [V]: 380 - Current consumption [A]: 189 - Fuse [A]: 200 - Power [kW]: 80.0 - Transport dimensions: 7100mm x 2100mm x 2200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 668, cutting width (max.): 2,500 mm, overall weight: 2,000 kg, total length: 3,000 mm, total width: 2 mm, total height: 2,200 mm, input frequency: 50 Hz, input current: 10 A, Equipment: crane, This machine is unique! It has a working width of up to 2500 mm and requires very little space. In addition, it can independently lift the rolls and also lift the finished rolls out of the machine using a crane. The working speed is approximately 172 m/min, and the maximum winding diameter is 400–550 mm. The machine has 5 knife holders and a positioning laser for the empty cores. It can process 76 mm (3 inch) as well as 152 mm (6 inch) cores. The unwinding brake is regulated via an ultrasonic sensor to ensure consistent winding tension. The machine has 2 ionizing bars to prevent static charging. Nodpfx Akj Aban Esqedc

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Nsdpfju Au I Tox Akqodc Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee! Ndedpe Adfddefx Akqec

Condition: good (used), functionality: fully functional, planing width: 630 mm, number of blades: 4, actuation type: manual, total length of planing tables: 2,100 mm, total width: 630 mm, overall weight: 950 kg, Jointer planer KÖLLE, table width 630mm, max. planing height 250mm. Ndodsz Tfc Hopfx Akqjc

Condition: used, machine/vehicle number: 43355, functionality: fully functional, planing width: 510 mm, actuation type: electric, overall weight: 950 kg, BÄUERLE – 510 mm surface planer, in working order, cast iron construction. For sale is a robust, heavy-duty surface planer from the German manufacturer BÄUERLE, with a working width of 510 mm. The machine features a massive cast iron construction, long work tables, and an adjustable fence. It is a classic industrial machine designed for professional woodworking. Technical condition: The machine is in good working order. It was recently in use in an active woodworking shop. Solid cast iron construction. Metal work tables. Adjustable fence. The original BÄUERLE manufacturer's marking is preserved. Technical data: Manufacturer: BÄUERLE, Germany. Type of machine: surface planer / joiner. Working width: 510 mm. Number on the preserved nameplate: 4335. Year of manufacture: unknown. Condition: used, in working order. The machine is being sold due to no longer being needed. I am looking for a new owner who will appreciate its solid construction and continue to use it in a workshop or woodworking shop. Viewing and testing are possible on-site after prior arrangement. Location: Poland, near Szczecin. Collection and transport are the responsibility of the buyer. Loading can be arranged. Price: €2,860 (negotiable). Please contact me primarily in writing via the Machineseeker form. Thank you for your understanding. Ndodpfez Uyzaox Akqjc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 50 h, Fimal thickness planer manufactured in 2022, in like-new condition. Ndjdpfxjz S Ulze Akqsc The machine has only been used for a maximum of 50 hours. Therefore, it is in very good condition! Working width: 63 cm Electric table adjustment Includes new Tersa replacement knives Optionally, a matching Fimal surface planer, model PF530N, manufactured in 2022, can also be purchased. See the last pictures. Optionally, a suitable dust extraction system can also be purchased. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses and excludes any warranty for defects. No guarantee, warranty, or return.

Condition: good (used), Year of construction: 2001, machine/vehicle number: 3060, functionality: unexamined, power: 5.5 kW (7.48 HP), input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 520 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,600 rpm, rotational speed (min.): 5,600 rpm, overall weight: 570 kg, Equipment: CE marking, Sicar Thicknesser Forte 520, Thicknessing width 520 mm, max. workpiece height approx. 293 mm, Motor 5.5 kW, 400 Volt, 50 Hz, 4-knife Tersa cutterblock, as inspected, Ex Works, from location Seevetal, subject to prior sale. Nsdpfey E Rzijx Akqedc

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. Ndsdpfxszx Tgrs Akqoc If you have any questions or require further information, please do not hesitate to contact us.