Bar planer buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
2
used type pressure bar planer head Tragkoerper aus aluminium mech. feeder flight circle diameter 127 mm internal diameter 35 mm Schneidenbreite 240 mm Schneidenanzahl 4 pc. Mlawky9p original price 624,- ? located in 97447 Gerolzhofen more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu7ntrpnl Portable Cold Material Feed Bin System manufactured by BARBER-GREENE with the following Components and Features: -- (3) 8' x 8' material Feed Bins with Bin Extenders. -- Each Bin fitted with 24" Variable Speed Feeders that are set up for 3 HP [...] Motors with DODGE Reducers but NO MOTORS are included. -- 24"Collecting Belt Conveyor with Drive Motor and Reducer with 5’ Discharge “Stinger” Section at the end. -- More photos to... more
9
Weinig Uniplan 23 Bottom 7.5 KW Top 7.5 KW 230 x 120 mm Double side surface planing machine Bkxm309 Feedmotor 3 KW, feedspeed 6-36 m/min 50 mm spindles Motors with brakes 7200 rpm for all spindles Short infeed table Improved sound enclosure Jointers on top and bottom spindle Without cutterheads more
4

Planer-Type Milling M/C - Double Column MATTEC 80-30-60

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2015
used
x-travel 8500 mm y-travel 4400 mm z-travel 1600 mm Control Heidenhain iTNC530 surface area 10000 x 3200 mm rapid traverse 20 m/min spindle turning speed range 4000 U/min Torque 1000 Nm tool taper ISO 50 number of tools 61 Bcbhpsinxt total power requirement 60 kW weight of the machine ca. 62 t Portal milling machine Mattec 80-30-60 - spindle hours approx. 980 hours - Main spindle drive air-cooled - Lubricated and cooled two-stage gear-oil circulating air -> 1st stage - 1000 Nm in S6 opera... more
1
x-travel 10250 mm y-travel 5320 mm z-travel 800 mm w-axis 2900 mm table-size 10000 x 4000 mm distance between columns 5000 mm workpiece weight 40000 kg distance table - lower edge spindle 3500 mm Bbcxc0akll spindle diameter 100 mm diameter of quill 330 mm spindle turning speed range 30 - 4500 U/min spindle taper ISO 50 spindle motor 30 kW feeds x/y/z -stepless 1 - 6000 mm/min rapid travel x/y/z 10/20/8 m/min Control Fanuc 31i total power requirement 100 KVA weight of the machine ca. 130 t dim... more
1

BARK BURNER WELLONS 40 MM BTU

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Mucjys SALTON /WELLONS Boiler and Fuel Cell with the following specifications: -- (2) Cells, 20 Million BTUs each for total output of 40 Million BTUs. -- Maximum fuel infeed: 9,700 Lbs/Hr ( 4,400 kG/Hr) -- OPTIONAL ITEMS: VOLCANO 45 MBTU Thermal Oil Heat Exchanger, Thermal Oil Storage Tank, Pumps, Valves, Controls, Exhaust Fans, etc. more
2

BAR FEEDER IEMCA KID80 SHORT MAGAZINE BAR FEEDER

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2011
good condition (used)
2011, s/n 021140QA01, capacity 5 to 80mm dia bar. Lengths 90 to 1,615mm, Weight 500kgs Bczkwi9btl more
6
Double side planer (Double Surface Planer ) Maximum working width 610 mm Bczhf7tyts Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE Top 22 KW Bottom 18.5 KW more


bar planer
daily

New machines via email!

Stay updated!
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm thread dia. 30 mm turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm total power requirement 5,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,10 x 0,85 x 1,50 m Srnyhk with 2 cross and 2 parting-off slides, with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more
1
x-travel 17000 mm y-travel 7000 mm z-travel 3000 mm w-axis 4250 mm table-size 16000 x 5000 mm distance between columns 5500 mm workpiece weight 300 t distance table - lower edge spindle 6250 mm spindle diameter 220 mm diameter of quill 630 x 630 mm spindle turning speed range 2 - 2000 U/min spindle taper ISO 60 spindle motor 150 / 120 kW max. torque on the spindle 13702 / 9134 Nm feeds x/y/z -stepless 1 - 10000 mm/min rapid travel x/y/z 12/12/10 m/min Control Fanuc 31i Bblihrfwt3 total power ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ncfnl DMC CN110/2 Chronosand Planer Sander 2-Head, 43" width cap. Abrasive Planer;Equipped with: -- 1st Head: Hellical, carbide insert knife planer head, 30 HP motor; -- 2nd Head: Rubber covered contact roll 11" dia., (80 duro), 25 HP motor. -- 43" x 103" (to be verified) Abrasive belts with electronic belt tracking and air tensioning, -- Automatic tracking of conveyor belt, variable feed speed from 13 - 66 FPM, 7.5 HP motor. Complete with: -- Air blast... more
7

MAG BAR FEED TORNOS ROBOBAR SBF326E MAG BAR FEED

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2014
good condition (used)
2014, s/n 3538-14/10, 4 metre bars, off Tornos CT20 Hqhaj8d9k more
9

Bar code reader SICK CLV431-2010

Varberg, SwedenSweden dealership location
6455 km
2010
as good as new (ex-display)
All units has been in production for 2 years, then put in storage, as new condition. SICK barcode reader system: 7 units CLV431-2010 bar code readers 7 units CDM420-0001 control boxes 8i0tuyi2q 6 units (+1 unit brand new in carton) KEYENCE RGB Digital Fiberoptic Sensor CZ-K1(P) Series Computer, software, Manuals Can ship worldwide! more
5
Maximum blade diameter: 350 mm Bcblswnzfl Length stop and roller conveyor on request more
1

barfeeder FMB turbo 3-26

Karlsbad, GermanyGermany
6611 km
2001
good (used)
Weight was attached to STAR: 800 kg Cj9tpwmy more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbuzob0hp9 BARR-MULLIN TURBO WONDER Optimizing Saw;2" x 8" Cap., 24" min. length, up cut design. -- Equipped with: 7-1/2 HP - 1,740 RPM Main motor, 20" blade cap., 1" arbor, 4,660 RPM blade. -- DC Servo drive with (12) knurled steel feed rolls, variable feed speed 0 - 600 FPM, belt infeed, spring loaded press rolls, lower driven outfeed [...] Features: -- Top sensing camera for cut for value, cut for yield, cut for ratio, and cut for finger joint block... more
5

Pillar Drilling Machine IBARMIA B40

Dreieich, GermanyGermany dealership location
6568 km
1998
used
bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm spindle taper MT 4 8pl3hmyrw table-size 560 x 480 mm spindle turning speed range 61 - 1169 U/min feed range - boring 0,1/0,2/0,3/0,4 mm/U coolant voltage 400 V total power requirement 2,4 kW weight of the machine ca. 620 kg dimensions of the machine ca. 0,60 x 1,10 x 2,37 m threading device - [...]: 669 V - thread cutting device - automatic feed - rapid clamping boring chuck ROEHM Ø 1-13 mm - coolant equipment - ma... more
1
x-travel 8.000 mm y-travel 4.500 mm z-travel 950 mm Control Sinumerik 840 C feed speeds x/y/z axis 5.000 mm/min rapid traverse X- and Y-axis 15 m/min spindle turning speed range 10 - 3.200 U/min spindle taper ISO 50 Workpiece table measurements (2x) 4.000 x 3.500 m table load capacity max. 5 t/m³ Bkhuyixx weight of the machine ca. 64 t Accessories - Tool magazine - Automatic tool changer for 60 tools with chain magazine - Tool holder ISO50 - Cooling by the spindle middle 30l/min by 7 bar ... more
3

Bar feeder Hydrafeed Multifeed 3-80

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1999
good (used)
Short with magazine rod feeder. L2yxvrk capacity and type of rods: round rods 3-80 mm. Length of rods (depending) 1325 mm. Height of lathe centre line 700-1500 mm. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcp2lvg2rr Ring Debarker Infeed with the following features: -- Troughed Chain Conveyor. -- 16 Ft. length. -- Electric Drive. -- Hourglass log centering. -- Air Suspension. -- Removed and ready to load. more
5
length 160 mm width 160 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Vmb87p88r This is an electromechanical 4-fold turret. On request we will send you a data sheet. more
9
Demonstration Machine available immediately: RENNER RS-18,5 oil-injected screw compressor. Made in Germany The compressor is in very good condition with 3 operating hour. Pressure: 10 bar Rated power: 18,5 kW Delivery quantity: 2620 liters / min Sound level: 71 dB (A) Bbo89ugpol Compressed air output: 1 1/4 " Dimensions Length x Width x Height: 1287 x 799 x 1296 mm Weight: 532 kg Operating hour: 3 Bh Warranty: 6 months from date of purchase more
3

Dishwasher Hobart UX 30 EB

More Hobart Ux 30
Babenhausen, GermanyGermany dealership location
6588 km
good (used)
Universal Dishwasher stand-alone printer 3 rinsing programs, Genius X Alkaline Filter System Drain pump easy self cleaning Sssb8k 1 rinsing basket and 1 rinsing insert for plates stainless steel Pressure-boosting pump Slot 830 x 620 mm, HxT, Connector 400 V, 32A-CEE connector, Dimensions: 780 x 820 x 1950 mm, WxDxH, DGUV-V3 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbxebhepsj NICHOLSON Rotomat series 35" Ring Debarker with a 1980s era Ring. -- Frame is 1960s era prior to the "A" series. -- Hydraulic Power Unit. -- Condition is good despite the machine's earlier frame. more
5
length 160 mm width 160 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Ovk8nhf2 This is an electromechanical 4-fold turret. On request, we will provide you with a data sheet. more
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - spindle passage - mm turning length - mm Hp0w7obwc Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
6
frequency-controlled screw compressor RENNER RSF-PRO 7,5 Year of construction: 2017 Operating hours: 3346 Bh Technical specifications: Type: RSF-PRO 7.5 (made in Germany) Possible operating pressures of the system: 6 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Annex C: at 6 bar (g): 0.42 / 1.37 m³ / min at 7 bar (g): 0.41 / 1.30 m³ / min at 8 bar (g): 0.39 / 1.24 m³ / min at 9 bar (g): 0.36 / 1.18 m³ / min at 10 bar (g): 0.33 / 1.09 m³ / mi... more
5

Dishwasher Hobart UXLS-11

Schaafheimer Str. 5, 64832 Babenhausen, DEGermany
6588 km
good (used)
Universal Dishwasher Gpbaxaj23 Floor machine with softening 3 rinse programs with color display Genius X fine filter system Dishwasher with drain pump Easy Clean Concept 1 wash basket 680 x 580 mm stainless steel Rotor X washing system Connection 400V, 21,1 kW, 32A CEE plug Dimensions: 780 x 860 x 1980 mm, WxDxH Used machine cleaned and workshop checked more
1

DEBARKER NICHOLSON A5A 27" RH

North Carolina, United StatesUnited States dealership location
518 km
1996
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbutxvkum2 27" Nicholson Model A5A Ring Debarker with the following features: -- Double Ring. -- Slitter. -- 240 FPM Max. feed speed. -- Air Seal Beater Ring. -- Right Hand, 10 Roll. more
1

Pressure bar Martin

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
2001
good (used)
Length: 3500mm Pneumatic pressure build-up Year of construction: 2001 2zkhwiqca more
4

Bar Automatic Lathe - Single Spindle INDEX C29

More Index C 29
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1976
used
spindle passage - mm turning length - mm bore depth - mm Bcy8m3o9kd Accessories: Turning sets, various tool holders, collets, feed pliers more
5

Auto bar loader Iemca PRA 40/44 P

Brembate di Sopra, Bg, ItalyItaly
6844 km
reconditioned (used)
Iemca PRA 40/44 P 2ra7hq In 2016 rebuilt more
3

Cream Machine Hobart G 5 R

Babenhausen, GermanyGermany dealership location
6588 km
2008
good (used)
cream horns Hobart 8kyuf8aht Model: G 5 R Table model for 3-5 liters of raw cream With nozzle discs Time controller 1 to 6 min Stainless steel boiler up to 5 liters Connection 220V more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bbutyim9u7 MORBARK C-8 DEBARKER complete with the following components and features: -- "C" Series Debarker Model "C-8". -- Will debark logs from 4" to 20" and peel 4" to 16" in diameter and up to 70' long. -- 100 HP motor. -- Production 30 FPM -- Capacity 4" to 24" diameter. -- Capacity 8' to 70' length. -- Complete with Operator Station Cabin, Conveying and support Structure as seen in the photos on our website. -- The Operator's Cabin and support... more
3

bar guide for SF51 Schuette SF51

Rösrath / Köln, GermanyGermany dealership location
6431 km
good (used)
Bapn3g37ul bar guide for a multispindle lathe Schuette SF51 adaptable on Schütte SF 42 incl. stock stand and sheets more
2

Round bar loader IRCO ILS RBK 100/16

Remscheid, GermanyGermany dealership location
6419 km
2010
used
bar length 1600 mm bar material dia. 2-100 mm weight of the machine ca. 1,2 t 2znh9ki more
5
Type:  used machine working width: 510 mm Table adjustment: manual Surface planer table: 2600 mm 2-blade-shaft F9xonzt Motor Power 4kW Year of construction:  Location: Warehouse / 82281 Herrnzell more
2

CNC Lathes LNS Eco Load L Bar Feed

Dundee, United KingdomUnited Kingdom dealership location
5598 km
2006
ready for operation (used)
Code: ST2895 Nfzkd Bar Capacity:              65mm Bar Length:                 1500mm more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbutyr8fi8 °Morbark Model 640 Debarker;Hydraulic operated, electric powered debarker. -- Infeed and outfeed conveyors are available -- 75 HP TEFC 230/460 volt main drive motor -- built-in 30HP hydraulic power unit with tank. -- Operator’s controls and operator’s cab. -- Carbide knife equipped cutterhead. -- Feed speeds up to 110’ per minute on logs between 6” and 40” diameter. more


bar planer
daily

New machines via email!

Stay updated!

to

to

Edit search
BAR PLANER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close