Bar automatic buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Dimensions (l x w x h) approx.: 2100 x 1650 x 1900 mm Weight approx.: 900 kg Description: Cutting capacity round 280 mm. Cutting capacity 250 mm square. Cutting capacity in rectangle 350x200 mm. Height of grippers 150 mm. Feeder stroke 2,5-520 mm. Bbjnmkpycn In Online Auction with approx. 92 further Machine Tools and other Assets! Bidding ends: Thursday, 08 March 2018 from 12pm (local time) Auction start price: EUR 2.000 (plus VAT and 15% buyers premium) Your contact person: Miguel Montes more
3
pneumatic actuated automatic valves Actubar-actuator with opto-electrical signal unit bar-Switchmaster 8zlj0uyjq multiple times on stock / unused, older stock more
6
Cutting sizes: 6500 mm x 6500 mm. Sawblade projection: 140 mm. Main saw motor 18 kw / scoring motor 2,2 kw Main sawblade 520 x 4,8 x 60mm Scoring sawblade 200 x 4,8-5,8 x 45 mm Feed speed of saw carriage: 5-100 m/min forward, 100 m/min reverse Feed speed of programmable fence: 80 m/min (limited to 25 m/min for safety reasons) 10 grippers Max. gripper opening: 185 mm Double sided aligning roller, min/max alignable panel width: 50 / 2200 mm 5 pcs air flotation tables in the front, each 2810 x 65... more
5
number of spindles 6 spindle passage 32 mm turning length 152 mm Speed 200-2800 U/min. turning diameter 32 mm Ogcdcc8w7 feed Werkstoff: 254 mm Accessories: multi edge turning, univ. thread cutting attachment, Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels more
3
number of spindles 6 mm spindle passage 82 mm turning length 155 mm bar feed 260 mm slide stroke - longitudinal 180 mm slide stroke - cross 105 mm spindle turning speed range 89 - 556 U/min spindle motor 30 kW total power requirement 32 kW weight of the machine ca. 18 t dimensions of the machine ca. m Crnki3z 6 cross slides: 1 x swing stop, combined, 6 slides equipped with toolholders. Longitudinal slide block, equipped with 2 toolhold slides, and special tool holder with cross movemen... more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 1987 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle -threading unit -tool breakage control (photo:blue box on the top) never used. -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed... more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 1989 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle -threading unit Naifl -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM -Eilgang (190° Steuerwellendrehun... more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 1989 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle, not installed, defect. -threading unit, defect, clutch? -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM... more
1
BAR LENGTH: 3000 mm BAR DIAMETER: 52 mm PRICE: On demand Gu9w2k more
4
Miyano ABX-51TH2 Bbe0btgneb Anno 2005 Max. Bar working diameter spindle mm 51 Max. Bar working diameter sub spindle mm 51 Max. turning lenght spindle mm 125 C Axis Accuracy - 0.001 mm Spindle / sub spindle Junction ASA 6(6) Speed rotation rpm 50-5000 (50-5000) Power AC motor (cont./30min.) kW 11-15(5.5-7.5) Live tools Nr. Live tools Spindle / Sub Spin. nr. 12 (12) Control FANUC 16i-TB more


bar automa...
every day

New machines via email!

Be informed!
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 198 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle, never used -threading unit -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM -Eilgang (190° Steuerwellendr... more
2
BAR LENGTH: 3700 mm BAR DIAMETER: 60 mm OVERALL DIMENSIONS: 5100 x 800 x 1300 mm 8ljgvk8ph PRICE: On demand more
1
BAR LENGTH: 3400 mm BAR DIAMETER: 20 mm WEIGHT: 1080 Kg Ceg0jitm OVERALL DIMENSIONS: 5000 x 600 x 1280 mm PRICE: On demand more
6
number of spindles 8 spindle passage 20 mm turning length 80-100 mm control PNC-Deco Fanuc turning speeds 5000 U/min Sub-spindle 20 mm load magazine IEMCA PRA 52/33P Dlgpyndu0 Number of working hours h total power requirement 15 kW weight of the machine ca. 8 t equipped with: - 23 axes, 8 spindle - Chip shut Switch-on Hours: 39.000 h (with coolant device AE1058 Knoll Chip Conveyor) Serial-No: 1713 more
6
5 tool spindles 4 cross slide with longitudinal drive 2q2lqa Double slide in position 6 pick-up spindle in position 6 Chip conveyor with vibration filter HD coolant Tool holder set various curves Bar loaders IEMCA PRA for 3 m rods more
4
BAR LENGTH: 3300 mm BAR DIAMETER: 5-65 mm 97xgmuj03 WEIGHT: 1400 Kg PRICE: On demand more
6
number of spindles 6 spindle passage 32 mm turning length 80-100 mm control Fanuc PNC-Deco turning speeds 5000 U/min Bbflx2aopn Sub-spindle 32 mm equipped with: - Chip shut Switch-on Hours: 43.000 h Knoll collant device FKA/160 T-1 Knoll Späneförderer Serial-No. 3821 more
5
Automatic spraying booth 2dvmmmin Panel feed by wide metal belts with 20 mm interspace, total width 1600 mm Feedspeed 4 to 10 m/min Rotary system with 8 arms, each arm with 2 guns (2 circuits) Automatic belt cleaning and lacquer recycling (Demo machine) more
6

Automatic Bar Lathe SAMECA Multisam 2000

Düsseldorf Germany
6383 km
1998
used
Offer
Another 6 days
Weight approx.: 300 kg Dimensions (l x w x h) approx.: 3600 x 800 x 1400 mm Description: SAMECA Multisam 2000 Automatic Bar Lathe Bbevx7hf7t In Online Auction with approx. 140 further Machine Tools and other Assets! Bidding ends: Wednesday, 28 February 2018 from 10am (local time) Auction start price: EUR 750 (plus VAT and 15% buyers premium) Your contact person: Karl-Heinz Krouß more
4

Automatic Bar Lathe IEMCA PRA40/37/F

Düsseldorf Germany
6383 km
1986
used
Offer
Another 6 days
Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 4200 x 1100 x 1600 mm Description: IEMCA PRA40/37/F Automatic Bar Feeder - bunch feeder max. bar length: 3700 mm max. bar dia.: 40 mm In Online Auction with approx. 140 further Machine Tools and other Assets! Bbf7rcgidd Bidding ends: Wednesday, 28 February 2018 from 10am (local time) Auction start price: EUR 700 (plus VAT and 15% buyers premium) Your contact person: Helmut Sobolewski more
6

Automatic Bar Lathe IEMCA PRA 40/37F

Düsseldorf Germany
6383 km
1987
used
Offer
Another 6 days
Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 4200 x 1100 x 1600 mm Description: IEMCA PRA 40/37 Automatic Bar Feeder - Bunch Feeder bar length: 3700 mm bar dia.: 40 mm For linking to a a multi-spindle turning automate In Online Auction with approx. 140 further Machine Tools and other Assets! Bbf7qyvcpc Bidding ends: Wednesday, 28 February 2018 from 10am (local time) Auction start price: EUR 700 (plus VAT and 15% buyers premium) Your contact person: Helmut Sobolewski more
4
number of spindles 6 spindle passage 20 mm turning length 80 mm total power requirement 25 kW weight of the machine ca. 6,5 t Max. bar Ø, normal 20mm Max. bar Ø, square, hexagonal, octagonal14 / 17 / 18mm Max. bar feed80mm Stroke of longitudinal slide63 / 39.5 mm Boring depth, max.39.6mm Stroke of cross slide, max.32 / 25mm Stroke of lower cross slide40 / 26mm 49 Spindle speeds355 - 5,000rpm No. of workpiece revolutions per work cycle60 - 1.32 35 cutting times per part0.36 - 53sec Spindle... more
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm thread dia. 30 mm turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm total power requirement 5,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,10 x 0,85 x 1,50 m Srnyhk with 2 cross and 2 parting-off slides, with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more
6
number of spindles 6 Stück spindle passage 32 mm rated current 85 total power requirement 50 kW speeds 200 - 1160 stufenlos U/min rated capacity Antriebmotor 18,5 kW Dimensions (L,W) 3850 x1390 mm spindle turning speed range ( Bereich 1) 450 - 3150 U/min spindle turning speed range ( Bereich 2) 200 - 1400 U/min Transport dimensions 5 x 1,5 x 2,3 m total power requirement 55A/380V/50Hz weight of the machine ca. ca. 8,8 t dimensions of the machine ca. 7,50 x 2,10 x 2,60 m Retrifit 2016 - Ma... more
6
"Automatic panel storage & retrieval system BARGSTEDT TLF 410 /21/09 Longitudinal traversing range mm: 21.000 Crosswise traversing range mm: 11.500 Stack height max mm: 2.100 Workpiece width max mm: 2.100 Workpiece width min mm: 800 Workpiece length max mm: 4.200 Workpiece length min mm: 200 Workpiece thickness min mm: 6 M3277 Feedrate max m/min: 70 Continuously variable feed: Yes Vacuum lifter: Yes Rotary device: Yes Adjustment to panel size: Yes Total connection kW: 9 Operating status: still ... more
6
number of spindles 6 spindle passage 32 mm turning speeds 200 - 1160 U/min total power requirement 50 kW weight of the machine ca. 8,8 t dimensions of the machine ca. 7,50 x 2,10 x 2,60 m Retrifit - 2016 Brpzpdos - Main and feed drive complete new - Drive belts new - Safety coupling in feed drive komplet reconditioned + new storage - Longitudinal slide completely overhauled - Cross slide completely overhauled - 6 x spindle completely new , new V-ring, 2 x new spray rings - Rotating spindle... more
2
BAR LENGTH: 4300 mm BAR DIAMETER: 5-65 mm WEIGHT: 1950 Kg PRICE: On demand Bfjmtk2u more
5
Automatic with Stangerlader Number of spindles 1 Spindle bore 25 mm RPM 550-4200 RPM Total power 2.0 kW Y9z8lcnlb Weight approx. 500 kg Dimensions (Lxwxh) approx. approx. 1.0 x 0.6 x 1.5 mm S/N 88035, hydraulic power, Star revolvers, pipe loader length 4000 mm more
6
5 tool spindles 4 cross slide with longitudinal drive Double slide in position 6 pick-up spindle in position 6 Chip conveyor with vibration filter high pressure coolant Tool holder set various curves Ptlzpa Bar loaders IEMCA PRA for 3 m rods more
6
Number of bars max.: 9 cutting capacity with 1 bar max.: 20 mm weight of the machine ca.: 6,0 t Cuts, bends and picks steel rods. Plant is applicable for use in concrete formwork, reinforce concrete, etc. Plant is specially has been constructed for this type of application area. consists of: -cutting unit incl. feed -bending unit -bridge with robot unit for gripping of steel rods - SPS controlled robot arm -delivery unit -framework with 9 boxes -control panel - electric cabinet ready for transpo... more
6
pindle passage: 42 mm Bzjxvuf9a Number of spindles: 8 Length of the bar material: 4000 mm Machine dimensions:(LxWxH): 6720x1920x2165 mm Machine weight: 14200 kg more
4
6-spindle bar automatic lathe Manufacturer: Gildemeister Type: AS 82 Fg0syrnxk Built in 1978 Spindle passage: 82 mm Bar feeder: 260 mm Turning length: 155 mm Longitudinal carriage stroke: 180 mm Page carriage stroke: 105 mm Spindle speeds: 89-556 U/Min Spindle drive: 30 KW Weight: 18,000 kg 3 units available Machines are dismantled and reverse loading ready more
6
Barberan automatic painting line includes: Pinomatic automatic stacking of items to Pinomatic line Pinomatic conveyors Viet Valeria Challenge 333 TM (2 x sandpaper) Viet Valeria Challenge 223 TM grinder (3 x blade sanding pad, 1 sanding pad) - Berberan UV lamps (in front of the paint booth) - Barberan paint shop, two spray guns for 4 guns each. (Total of 8 pistols) 8vqmqwmvc Berberan drying trolley - warm air flow 12 m in length -The device transporting the components to the second Pinomatic dr... more
6
Full automatic saw for pipes and bars: up to 80mm Manufacturer: ADIGE sala Type: TT640 Year of manufacturing: 1995 Complete set with bar feeder and Deburring machine: Manufacturer: ADIGE sala Type: ST660 Ersoed3ve If you have questions please don't hesitate to ask. Best regards, Bram van Summeren Second Owner more
6
number of spindles 6 spindle passage 36 mm turning length 125 mm total power requirement 60 kW weight of the machine ca. 11 t dimensions of the machine ca. 7070 x 1540 x 2000 mm Control: Mechanical, electrical Gripper-device: SZ 42 Bar feeder Iemca, type PRA 40/33 / P, year of construction 1996 Additional equipment: straight turning device, multi-edge turning device, thread cutting device, thread milling device Fette thread head incl. thread rolls. 3 jaw chuck for RSB, oil filter ... more
4
- max. bar diameter 42 mm - turret with 6 stations - max. turning length 100 mm - 2 horizontal supports - 2 vertical supports - hydro feeding tube STENZEL dimensions LxWxH: Dmjaw9d - machine 2200 x 1200 x 1600 mm, weight 1800 kg - tube 5700 x 600 x 1200 mm, weight 500 kg more
6
Semiautomatic column guided horizontal bandsaw Fabr PEHAKA type HS 310/500 GBS Masch 39553, built in 1999 swung to both sides Technical Data:.. Cutting area 90 approximately 310 mm 90 flat 310 x 500 mm 90 square 310 x 310 mm 75 flat + - 310 x 470 mm 60 flat + - 310 x 410 mm 45 flat + - 310 x 300 mm 45 mm 30 around 310 flat - 310 x 180 mm band speed 20 - 120 m / min. Saw-band 5800 x 34 x 1.1 mm working height 650 mm weight approx 2500 kg External dimensions 2800 x 2000 x 2250 mm with: - 2-column ... more
6
AUTOMATIC THROUGH-FEED LINE MADE BY ► POSITION 1 - OUR CODE: MMI022 - TYPE: LOADER - BRAND: BARGSTEDT - MODEL: TBH 21 D AUTOMATIC SYSTEM TO LOAD PANELS in a boring line GENERAL SPECIFICATIONS ► Industrial and fast system ► Double sides for the loading of the panels into the production line to avoid interruptions ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Motorized transfer conveyor for the introduction of the panels into the production line - with comb-like frame to work ... more
6
- like new - completly reconditioned! Electric completly new pick-up spindle, pneumatic clamping arm for rear working M80eh2kyt auto bar loader Easy-load - new CE Declaration of Conformity more
6
2 piece Bar loader F. Iemca type PRA 40/35 Bj. 1999/1990 length 3.5 m max. Rod length: 3 m max. Rod diameter: 40 mm Es9zs7f more
1
Elect./Voltage: 208-220/440, 60 Cy, 3 Ph. C3qufzh8 BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 [...]; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4"" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV 22 mmbtu/hr. -- All equipment has less than 2,500 ac... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Uw99i2uva H. KALLESOE K 12 EL Case Clamp: -- Specifications:Working length 27.5"" - 88.5"" (700 - 2,250 mm); working height 11.8"" - 49.2"" (300 - 1,250 mm); working width 25.5"" (650 mm). -- Vertical & Horizontal Pressure Beams:Vertical & horizontal pressure beams are adjusted by means of (3) 220 v, 3 phase motors w/automatic locking; includes a total of (5) clamps with (2) pressure cylinders per clamp; each cylinder 4"" (100 mm) dia with a 3.5"" (90 mm... more
1
Elect./Voltage: 380/480 V, 50/60 Cy, 3 Ph. Bs3p3nwi LIGMATECH MPH 410/25/07 CASE CLAMP (SEMI-AUTOMATIC): -- (1) Horizontal & (1) vertical interlocked pressure beam, each with electric push button control; 8-beam surface area eliminates need for pressure pads. -- Working capacity:9.8"" - 98.4"" (250 - 2,500 mm) Length; 9.8"" - 27.5"" (250 - 700 mm) depth, 12"" - 55"" (305 - 1,400 mm) height. -- Motorized horizontal & vertical beams can position simultaneously or individually during setup,... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cftqfggs BARBER GREENE Portable Dryer System;With the following major components and features: -- 7 Ft. dia. x 35 Ft. Rotary Drum Dryer. -- Comes with new Flights. -- HAUCK Model ""380"" 80 MM BTU Burner operates on Used Oil or Diesel. -- External Trunnion Drive with Shaft-Mount Reducers. -- (2) Drive Motors per trunnion for a total of (4) Drive Motors (480 volt, 3 phase). -- Mounted on 3-Axle Carrier. -- BARBER GREENE 58,000 CFM Baghouse with Pulse ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Enbnrsr Portable Cold Material Feed Bin System manufactured by BARBER-GREENE with the following Components and Features: -- (3) 8' x 8' material Feed Bins with Bin Extenders. -- Each Bin fitted with 24"" Variable Speed Feeders that are set up for 3 HP [...] Motors with DODGE Reducers but NO MOTORS are included. -- 24""Collecting Belt Conveyor with Drive Motor and Reducer with 5’ Discharge “Stinger” Section at the end. -- More photos to ... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Mcsnz SALTON /WELLONS Boiler and Fuel Cell with the following specifications: -- (2) Cells, 20 Million BTUs each for total output of 40 Million BTUs. -- Maximum fuel infeed: 9,700 Lbs/Hr ( 4,400 kG/Hr) -- OPTIONAL ITEMS: VOLCANO 45 MBTU Thermal Oil Heat Exchanger, Thermal Oil Storage Tank, Pumps, Valves, Controls, Exhaust Fans, etc. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Y0ahxwy °Morbark Model 640 Debarker;Hydraulic operated, electric powered debarker. -- Infeed and outfeed conveyors are available -- 75 HP TEFC 230/460 volt main drive motor -- built-in 30HP hydraulic power unit with tank. -- Operator’s controls and operator’s cab. -- Carbide knife equipped cutterhead. -- Feed speeds up to 110’ per minute on logs between 6” and 40” diameter. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. K9fbhhgj MORBARK 636 Rosser Head Style Debarker complete with the following features: -- All new Hoses with only 50 - 60 hours of run time. -- Mounted on Log Channel Input/Output Chain Conveyor. -- Complete with Hydraulic Power Unit. -- 75 HP and 35 HP Motors are on the Power Head. -- Full Tank, Motors, Hoses , Cab with Full controls, etc. are included. -- Previous owner says, ""This was working well, and we pulled it out to install the Cambio whic... more
1
Elect./Voltage: DIESEL POWERED Wnqlbbgce MORBARK 632 - Debarker, Diesel Powered;Has a 20 ft. in-feed and out-feed troughs, -- 250 HP CUMMINS power unit, -- 20 ft. MORBARK Hyd. Live deck with 2-arm stop and loader and (4) legs. -- Also includes (2) MORBARK electric bark conveyors, 20 ft. and 30 ft. more


bar automa...
every day

New machines via email!

Be informed!

to

to

Change search
BAR AUTOMATIC
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close