Used Round Bar Tables for sale (31,528)

Condition: like new (used), functionality: fully functional, The machine has undergone a complete overhaul. It features new shafts, bronze bushings, bearings, rollers, rear sprockets, a completely new pneumatic system, a new electrical cabinet, and a feed rate control has been installed. Csdpfx Ajzv Euvecpjrh

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to Csdpfx Aozcgtbocporh 10 m.

Year of construction: 2006, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Crsdezqgikspfx Acpoh Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping surface: 1400 mm x 1400 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Crjdpjfr Ih Defx Acpoh Slot distance: 160 mm Condition: Very good (used) Optionally with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Year of construction: 2011, condition: used, Grinding diameter: 600mm, grinding height: 400mm, max. table load: 500kg, length: 2540mm, width: 2130mm, height: 2350mm, weight: 5.2t, with manual, installation instructions and operating instructions, special face grinding program, 1x standard grinding wheel holder 25-100mm for wheel bore Ø127, tools (1x open-end wrench, 1x removal screw). An on-site inspection is possible. Cjdpfx Aez Da Nnjcporh

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 19115035, type of input current: three-phase, The cylindrical milling machine can be used to produce finished diameters ranging from 40 to 160 mm. The four cutter heads are continuously adjustable and each carries a finishing cutter and a roughing cutter. The drive motor for the cutter head has a power output of 30 kW, and the feed motor has a power output of 3 kW. Crjdpfx Acezlhamopsh

Condition: excellent (used), The milling cutter motor has a power of 37 kW, and the roller drive motor has a power of 4 kW. Crjdpszxc Aisfx Acpjh

Condition: new, ZEATZ NC rotary tables, PHV series – available for short-term delivery The ZEATZ NC rotary tables of the PHV series stand for high precision, stability, and flexibility in demanding machining tasks. They are ideally suited for precise positioning, turning, and interpolative machining and can be integrated into both new machines and existing milling machines. Your benefits: ✔ Integration into machines with HEIDENHAIN or SIEMENS controls ✔ Service and spare parts supply directly via JMT in Germany ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase Technical specifications: Working position: Vertical / Horizontal Available sizes: Table diameter 500 / 600 / 800 / 1,000 / 1,200 mm Crsdjm Tvz Dspfx Acpsh Also available with square clamping surfaces as an option. Max. workpiece weight: • Horizontal: up to 20,000 kg • Vertical: up to 4,000 kg Positioning accuracy: ± 3" Contact us, and we will be happy to advise you on selecting the appropriate ZEATZ NC rotary table and provide you with a customized offer.

Condition: excellent (used), Year of construction: 2010, 4-axis PEISLER Type :RT-215 Year 2010 ( 3rd piece available ) Crsdpet Daxxefx Acpjh Center height: 215 mm with power chuck Fabr.RÖHM Type:KFD-HS215/3 Fmax.48KN Nmax.3000/min with hydraulic connection for chuck and drive shaft on both sides, without motor and controller in very good condition. Quoted price is for one piece .

Condition: excellent (used), Georgian bar assembly table Complete Crodpfxoztyw Tj Acpsh In very good and clean condition Good working order, tested As it is Available immediately

Condition: new, Year of construction: 2026, functionality: fully functional, A machine for beveling wooden posts and poles. Credpfxoy Tx U Ts Acpsh Processes diameters ranging from 80 to 200 mm. Cutter head motor power: 2.4 kW. Number of knives: 2.

Condition: excellent (used), Dividing table – rotary table Brand: PDQ Diameter: 635 mm Height: 145 mm Base diameter: 760 mm Crjdjxazu Hjpfx Acpjh Indexing: 45° via index or 1° and minutes via scale Weight: 280 kg

Condition: used, Year of construction: 2006, bar feeder, second-hand manufacturer: IEMCA model: PRA 52/42/F year of construction: 2006 bundle-loading type magazine Please, contact us for getting more information and pictures on mail(at) or Cjdpez A D D Tofx Acpsrh subject to sale and mistakes *

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Csdpfx Acof A D Nmjporh Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: new, Year of construction: 2025, Safo DNAA 160 Finished product diameter 40-160 mm Crjdpfx Acjzxhatspoh New machine tool.

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Crodpfx Acef A Nq Aspeh Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Mouth size: Ø 200 mm -Dimensions: 250/250/H365 mm -Weight: 52 kg Credpfsii E Tnex Acpeh

Condition: excellent (used), Rotary table Diameter: 300 mm Height: 82 mm Crjdpfxsxz Tu Ij Acpeh T-slot width: 10 mm Indexing: 2 degrees per handwheel revolution Width: 400 mm Depth: 450 mm Weight: 38 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm -Weight: 83 kg Crsdpfxjg Rczfj Acpjh

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 500 mm -Height: 120 mm -Groove: mm Credpocktx Tefx Acpeh -Dimensions: 660/680/H120 mm -Weight: 129 kg

Condition: used, optical rotary table Csdpodtr I Sofx Acpsrh diameter 450 mm height 160 mm documentation available

Condition: used, Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck Credpfx Aet Trw Sjcpoh -Round table with three-jaw chuck -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg Cedpfjcilmlex Acperh

Year of construction: 2023, condition: used, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow Csdoy Ndg Hjpfx Acperh - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, ZEATZ PHL Rotary Tables – for workpieces up to 150 tons The ZEATZ PHL linear series combines high-precision rotary table technology with an integrated linear axis. It enables flexible machining solutions for large and heavy workpieces – from precise positioning to simultaneous rotary and interpolation machining. Your advantages: ✔ Integration into existing machines with HEIDENHAIN, SIEMENS, or FANUC ✔ Original spare parts available in stock ✔ Technical support and on-site service in Germany ✔ Financing and lease-to-own options available upon request ✔ 24-month warranty Csdpfx Aom Tv Azjcporh Technical features: Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (round clamping surfaces also possible) Max. workpiece weight: approx. 6,000 to 150,000 kg Linear axis: Travel range: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 arc seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controls Contact us – we will be happy to advise you and prepare a customized offer.