Used Drawbar Device for sale (13,764)

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg Ijdpfjxvp S Esx Ahyeht

Condition: used, machine/vehicle number: 5xxxx, Year of construction: 1985, Please contact ATS Norway for more information Please provide reference number upon request: 22140 Specifications: 1985 model Crane has been in operation and approved until March 2024 Jib length: 28 m Hook height: 20 m Max load: 3,000 kg (4-fall) up to 9.9 m Load moment: 750 kg at 28 m Drawbar and brakes must be repaired before towing Radio control replaced Ihjdpfjx Uwa Dex Ahyet New charger and batteries for remote control Counterweights included Ready for delivery Description: Potain tower crane from 1985.The crane has been approved and in use until 2024.Ready for delivery. Own weight: Model: 1985 Potain 325B tårnkran

Condition: used, machine/vehicle number: 15037991278R / 1407713xxxx, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 18748 Specifications: - 2015 model - Type: SEHK300 - Slightly used - Remote control with bluetooth - Lifting capacity: 30,000 - Ready for delivery Ihsdpfxovgyd Re Ahyet Description: 2015 Suxxesion pipe spreader in good condition. Flies with a number of pipes and extra equipment (see pictures). Ready for delivery.   Own weight: 1 Model: SEHK300 rørløfter

Condition: used, machine/vehicle number: 134xxxx, Year of construction: 2023, Please contact ATS Norway for more information Please provide reference number upon request: 22141 Spesifikasjoner: Ijdpfsx Uwaqex Ahyjht Produsert i 2023 9 t/m 3 utskyt Krandiagram Radiostyring Fungerer som den skal Klar for levering Beskrivelse: HMF 910K kran produsert i 2023.Kranen fungerer som den skal og leveres klar for bruk. Own weight: Model: 2023 HMF 910K kran

Condition: used, length 1000 mm width 800 mm height 630 mm weight 460 kg T-slot - width 50 mm Isdegrngdjpfx Ahyoht Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Table width: 800 mm Table height: 630 mm T-slot length: 50 mm Weight: 460 kg

Condition: used, depth 850 mm height 2200 mm length 1100 mm weight 2125 kg flute distance 400 mm Ijdjpy R Rzjpfx Ahysht 1x clamping angle Dimension Length: 1100 mm Height: 2200mm Depth: 850mm Weight: 2125kg T-slots: 28x50mm

Year of construction: 1987, condition: used, centre height 390 mm passage of steadyrest 220 mm chucking diameter 400 mm total power requirement / kW Ihjdpfx Ahohgw Uxoyet

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd Ihsdpsvg At Iefx Ahyjt - Climate/ac - Diesel - With belts Worl Power Er-180 000L-8 crane 180 t/m from 2016   Superstructure: - Supportlegs - Extra light - Quick attach - Reversing camera - Central grease Hours: 177

Condition: used, Electric chain hoist crane DEMAG Type PM 8 - Manulift Serial No. 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Distance from suspension to load hook: 700 mm Main lifting speed: 12 m/min Precise lifting speed: 2 m/min 1 fall = 80 kg Isdpjxcbnlofx Ahyoht Manulift hand control directly on the crane hook Mains connection: 380 Volt, 50 Hz Weight: 20 kg in good condition

Condition: used, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21130 Specifications: Year of manufacture: 1999 Capacity: 13 t/m Crane diagram Grab included New control console Very little use Iodpfx Ahew Rah Ijyjht Description: Palfinger 13 t/m crane from 1999.Comes with grab. Equipped with a new control console and has seen very little use.Has been in storage for several years, so some refurbishment should be expected.Ready for delivery. Own weight: 111 Model: PK 13000

Condition: used, machine/vehicle number: 50xxxx, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 18255 Specifications Gantry crane: Model year: 2016 Type: Gantry crane for railway Rail type: A100 Height to main hook: 11.9 metres Lifting capacity: 4 x 10 tons Total weight: approximately 131,865 kg Span length: 5.5 + 31 + 8 meters Delivery: Ready for delivery at short notice Ihjdpovg Rkhsfx Ahyjt Description: Powerful Gantry crane from 2016 , previously used in a railway context, for sale.The crane has four hooks with a capacity of 10 tons each , and is ideal for heavy lifting and precise handling of large items. The crane is delivered fully loaded on a truck , ready for transport. Shipping costs are additional.Can be delivered quickly by arrangement. Total Weight: 131865

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19552 Specifications: Lifting capacity: 2.5 tons Span: 18 meters Remote control Ready for delivery Description:Munck overhead crane for sale.According to the owner, it has seen very little use since it was purchased in 2018.Equipped with remote control and a 2.5-ton capacity.Available for prompt delivery. Own weight: 4000 Model: Traverskran Isdpfsvyf Uzjx Ahyoht

Condition: used, Dust suction hood x mm Motor output x kW Isdpfjx U A N Dsx Ahyjht Air consumption 2000 m³/h +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2006, condition: used, weight max. in kg 1000 kg weight 1020 kg condition sehr gut Ijdpex U A H Aofx Ahysht

Condition: used, Year of construction: 1990, length 3300 mm width 1800 mm height 1800 mm Iedpfswm Rp Aex Ahyeht weight of the machine ca. 3,2 t

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled Ijdpfoyah R Nex Ahyeht - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Ihsdpsib D H Rsfx Ahyst Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, Year of construction: 2017, workpiece dia. . mm Ihsdpjxzu Agjfx Ahyst material: rust free/heat resistant steel . welding process: 15-20 bolts /min at . mm weight of the machine ca. 120 kg

Year of construction: 2000, condition: used, 3 Stück Ijdpfxeupmwlo Ahyeht Dimensions (L/W/H) siehe Bilder mm weight of the machine ca. . t

Year of construction: 1999, condition: used, chuck 380 mm Vierte Achse Ihodpfx Ahex Edwnoyst weight of the machine ca. 280 kg

Condition: used, - Location: Bremen - Other The multi N/C pharma UV is a compact instrument for safe and precise TOC determination in pure and high purity waters. It is in accordance with the requirements of the Water Monograph of the European Pharmacopeia Commission and the Monograph of the United States Pharmacopeia Convention (USP) and is particularly suitable for water monitoring in the pharmaceutical industry, but also for water monitoring in the semiconductor industry. The multi N/C pharma UV operates on the principle of wet chemical UV oxidation in combination with a particularly precise and CO2-selective NDIR detection. Various technical documents as well as operating instructions in English. Iedpfxohzxizj Ahysht

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: TN52120936-08, total width: 1,000 mm, total length: 1,700 mm, total height: 1,800 mm, overall weight: 700 kg, TESA TESASCAN 52 length measuring device Iedpfx Aex T Anqshyjht - Measuring range up to approx. 300 mm Attention: The item must be collected between 18 and 26 February 2026 on a binding, to-be-agreed date. FCA D-78087 Mönchweiler – loaded onto truck

Condition: used, functionality: unexamined, USNR model turning device. Complete Ijdpfexcbicsx Ahyjht

Year of construction: 2018, condition: good (used), Mould turner 10Ton Ijdpfx Ahsw Dtp Hoysht Year : 2018

Condition: good (used), PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU, processor, Microbox PC -Manufacturer: Siemens, Simatic Microbox PC Simatic IPC427C -Type: 6ES7647-7BJ30-3XM0 Ihsdpfeuuu Ezjx Ahyst -Dimensions: 320/165/H70 mm -Weight: 2.7 kg