Used peripheral devices for sale (107)

Condition: excellent (used), Year of construction: 2005, Welcome Lsdpovyuvuofx Agzehr We offer Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of production: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Condition: excellent (used), Volumetric K-Tron dosing with Ruhrwerk and auger - Suitable for powder and granulate - Screw diameter: 35 mm Lhsdpjrvxn Iefx Agzer

Condition: excellent (used), Year of construction: 2013, Separator Lhedpfx Aex I N Adsgzjr MTF Technik Model: PZ 257 B Year of manufacture: 2013

Condition: good (used), Year of construction: 2018, MOTAN METRO G 1.5 I-HSS Ledpfx Agjxyi E Hszshr Stock no.: 503658 Machine type / Device type: Suction conveyor Manufacturer: MOTAN Model: METRO G 1.5 I-HSS Year of manufacture: 2018 A total of 5 units in stock

Condition: new, Year of construction: 2025, functionality: fully functional, The SS-M screw separator from MASS is available for sale; Lhedjx E Ry Sepfx Agzor Height: 1500 mm Screw length: 800 mm Overall width: 1060 mm Inclination angle: 30 degrees Profile: 9 mm Gap adjustment possible via wheel

Condition: like new (used), Year of construction: 2010, functionality: fully functional, You are planning to expand your central drying system but do not want to incur the high costs associated with original manufacturers. We are pleased to offer you a cost-effective and technically reliable solution for this purpose. Your in-house electrical engineering setup allows SIMAR conveying separators to be flexibly integrated with any existing control system. All that is required for commissioning is the control signal “Convey Start” (valve closed) – afterwards, the conveying process will run automatically. The units have been operated exclusively in a cleanroom environment with PP material (without glass fibers) and are therefore in excellent condition. 44 SIMAR conveying separators – from cleanroom production near Stuttgart. Features: Ljdjwub E Repfx Agzshr • With machine hopper • Some units equipped with shut-off valves • All devices made of stainless steel If you wish to purchase a device, the price is €485 each. This includes hopper, valve, magnets, and more! If you purchase all 44 units, the package price is €21,500 including transport within Germany. If you pick up the equipment yourself, we can offer a further price reduction! This is definitely worth taking a look at!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Granule dryer PIOVAN with material loader Lhodpfx Ajx Hylmjgzer

Year of construction: 1993, condition: good (used), BFM overhead cutter for PE-PS-PA pelletizing Lhsdpfjipyh Ijx Agzjr

Condition: used, Year of construction: 2015, Brand: Piovan Type: Dryer Model: HRM 200 Year of manufacture: 2015 Dry air quantity: 200 m3/h Connected load, max.: 38 kW and Lhsdpfjxvdh Isx Agzsr Model: PTUSET Year of manufacture: 2017 Connected load, max.: 9.0 kW

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Lodpfxjxx Tmro Agzshr Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: used, Year of construction: 2012, functionality: fully functional, The rotary table from MTF is available for sale; Container query: 600 mm x 400 mm x 400 mm Lhodpfx Aex Ek Dwogzjr Interface for query 2 levels, each with 4 containers Diameter: 1500 mm, height: 1200 mm

Condition: like new (used), operating hours: 5,000 h, PIOVAN granulate dryer, 100 liters Lhsdpfjxtitkjx Agzor

Condition: like new (used), Year of construction: 2022, Model: Piovan T3M Residence Hopper Type: Insulated stainless-steel material hopper Capacity: approx. 3 litres Construction: Stainless steel, 30 mm insulation Purpose: Material buffer downstream of the dryer Mounting flange diameter: Ø 280 mm Lodpoxyku Njfx Agzjhr Discharge diameter: approx. 67 mm Lid: Hinged cover with lock Options: Viewing window, level sensor, machine-mounting accessories

Year of construction: 2000, condition: used, Used filterless hopper loader Lhedpfsdlpynox Agzer

Condition: excellent (used), Year of construction: 2008, TTW Lodox A Iqtspfx Agzehr TYPE: TFR 600 SG Year of manufacture approx. 2008

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 Lsdexx Ti Tepfx Agzshr SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: used, functionality: fully functional, Material conveying devices, 4 units, from the company Motan are available for sale. Conveying capacity: 40 l/h Adjustable cycle 230V/50Hz Ljdpex Ekxnsfx Agzohr

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 The industrial vacuum cleaners of the R series are designed for extracting offcuts, cutting dust, and all types of production waste (such as plastic, paper fragments, or fabric scraps) and compacting them to facilitate their return to the recycling process. Originates from a cleanroom plastic granulate production Industrial vacuum cleaner for compressible material The R series industrial vacuum cleaners are engineered to remove and compact offcuts, cutting dust, and all kinds of manufacturing waste (plastic, paper fragments, or fabric offcuts) so these materials can be reintroduced into recycling cycles. • Reduced downtime through continuous cleaning • Compaction and easy removal of extracted material • Dust removal for work environments • Return of trim material to production • Flexible thanks to a variety of power classes • Container sizes are maintenance-free • Easy inspection • Operation possible without supervision. Lhedpfjw D Upzsx Agzer

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Lhjdpsxykm Ssfx Agzer Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: repair required (used), Year of construction: 2007, Color separator Separation & Sorting Technology Gmbh Year 2007 Missing sensors Lodpsu Icgbefx Agzehr Available catalog

Condition: not inspected (used), EWIKON 68010.208 D Lhedpexcnkgofx Agzer

Condition: excellent (used), 1.0 pcs. dosing unit (two components can be dosed) Manufacturer: MOVACOLOR Type: The Balance Lodpexqzkpefx Agzshr There are 3.0 pcs. dosing units available.

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Lhodpfsx Dm Rzox Agzsr Length: 950 mm Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable.

Condition: not inspected (used), EWIKON 68010.204D Lodpfxexcnk Hs Agzohr

Condition: not inspected (used), EWIKON Ledsxcniiopfx Agzehr Type: 68010.204D