New Arrivals
5
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse Dyfaydl Clamping force 90 to Control MicroControl MC 3 Gap mm 610 plate size 525/570 Machine weight 4.4 to more
6
OVERVIEW: Brand: Krauss Maffei Model: 650-3000-2300 BZ Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1996 Production hours: 23471 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 2800 mm Measurements height: 4600 mm Machine weight: 45000 kg CONTOL UNIT: Brand: Krauss Maffei Model: MC4 INJECTION UNIT: Stroke volume: 1096/2411 cm³ Injectio... more
8
Injection moulding machine used Manufacturer: Arburg Type: 270 S 250-60 Control: Selogica Year of built: 1998 Masch. Operating hours: approx. 90,000 h Cvlgivim Extras: Robot Interface HHG core pull tool heating system Closing side: Clamping force: 250 kN/ 25 tons Dimensions H X V 270 x 270 mm Plate size hxv: 400 x 400 mm Installation height min: 150 mm plate distance max.: 425 mm Opening travel: 275 mm inj... more
5
complete ready to use with changing spindle Bccjgw0bmy more
7
warehouse no.: 502498 manufacturer: ENGEL Typ: ES 650-125 HL Controller Unit: EC 100 year of construction: 2001 We are selling function-tested and tie-bar-less injection molding machine of the manufacturer ENGEL type ES 650-125 HL from the year of construction 2001. After the exact technical examination in our technical center in Langenfeld and the subsequent revision, the machine can be seen during test-run (dry-cycle run). The mould platens have a size of 740 mm in the horizontal an... more
6
Cutting height: 32 mm Gfwn7gp Cutting length: 44 mm Cut 2 strips at the same time Saw blades cut at a 45 ° angle Pneumatic blade feed more
5
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse Clamping force 60 to Control Unilog 4000 Tie bar distance 490 x 490 mm Core pulling Hivbtnp9o Data collection Terminal Weight 4 to more
5
screw size:115 mm injection shot weight in Polysterol:5858 g clamping force:20000 kN : INJECTION UNIT: screw size:115 mm max. swept volumne:6.232 cm³ injection shot weight in Polysterol:5.858 g/PS injection pressure:2.205 bar CLAMPING UNIT: closing pressure:2.000 t tie bar distance:1.900 x 1.500 mm mould hight - min.:1.000 mm mould hight - max.:1.700 mm opening stroke:2.600 mm CONTROL: microprocessor control:Polaris screen text:deutsch / german Manual:deutsch / german EQUIPMENT: robot i... more
6
Injection moulding machine used Manufacturer: Arburg Type: 270 S 250-60 Control: Selogica Year of built: 1998 Masch. Operating hours: approx. 90,000 h Extras: Robot Interface HHG core pull heating system Closing side: Clamping force: 250 kN/ 25 tons Dimensions H X V 270 x 270 mm Plate size hxv: 400 x 400 mm Installation height min: 150 mm plate distance max. 425 mm Opening strokel: 275 mm injection side... more
3

Release cutter Graule AKF 4

Dörpen, GermanyGermany
6349 km
1984
refurbished (used)
Machine completely functionally tested Gzfp2fs3u more
1
warehouse no.: 502469 manufacturer: DEMAG Typ: ERGOtech 50-270 Pro Controller Unit: NC 4 year of construction: 1999 operating hours: 47000 h warehouse no.: 502469 manufacturer: DEMAG Typ: ERGOtech 50-270 Pro Controller Unit: NC 4 Badj92brk0 year of construction: 1999 operating hours: 47000 h enquiry form email enquiry technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 500 kN... more
5
working pressure: 6 bar workpiece height max.: ohne Tisch: 350 mm workpiece height max.: mit Tisch: ca.150 mm vacuum pump: 300 m³/h foil width: ca.800 mm control: Siemens S5 connected load: 119 kVA S8ygjcav8 total power requirement: 119 kVA weight of the machine ca.: ca. 9,5 t space requirements of the machine approx.: L:11,0xB:6,0xH:4,8 m THERMO FORMING MACHINE for vacuum forming and laminating of interior paneling in vehicle construction with films and textiles. To this Machine can also be ad... more
5
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse 37zbvoln Clamping force 50 to Gap mm 375 Plate size 375/430 mm Machine weight 3 to more
1
screw size:40 mm injection shot weight in Polysterol:185 g clamping force:1250 kN : INJECTION UNIT:--- screw size:40 mm max. swept volumne:204 cm³ injection shot weight in Polysterol:185 g/PS injection pressure:1.860 bar : CLAMPING UNIT:--- clamping force:125 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm : CONTROL: microprocessor control:MC 3F screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Ja core pull:2 x : OTHER D... more
3
OVERVIEW: Brand: Kloeckner Desma Model: 956.050 ZO Application type: Injection Moulding Machine type: Rubber Injection Presses Availability: Immediately Construction year: 1997 Production hours: 47036 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 1410 mm Measurements depth: 1520 mm Measurements height: 3200 mm Machine weight: 3000 kg CONTOL UNIT: Brand: DESMA Model: DRC 1000 INJECTION UNIT: Stroke volume: 220 cm³ Bccqse077o Injection pre... more
4
330 mm blade diameter maximum cutting length 3300 mm min. cutting length 90 ° 360 mm Vsg9l3 complete with pneumatic power and with two-hand operation more
6
warehouse no.: 502421 manufacturer: BATTENFELD Gzao7ku2y Typ: BA 500-200 CDK Controller Unit: UNILOG 4000 year of construction: 1997 The locking unit for this CDK series consists of a 5-point toggle lever system. This is driven centrally by a hydraulic cylinder. This system allows very high speeds to be achieved. Irrespective of this, the energy consumption of this series is minimal. This used Battenfeld injection molding machine can be inspected by us in the warehouse by appointme... more
2
5-blade rotor 2 Statormesserreihen Rotor diameter 420 mm Working width 650 mm Inlet cross section approx. 420 x 650 mm Bccnl7xugx Drive motor 45.0 kW With noise protection equipment more
4
Injection molding machine, molding machine, plastic injection molding machine, plastic injection machine, Kunststoffspritzgießpresse Cxsvh8xm Clamping force 50 to Control Unilog 4000 Tie bar distance 480/580 mm Core pulling Data collection Terminal Handling system Fabr. Battenfeld To weight 2.5 more
3
Air volume:90 m³/h temperature max.:200 ° blower power:0,25 kW filling capacity:180 l dew point:-75 °C Bblkpb932m total power requirement:7,7 kW weight of the machine ca.:325 kg dimensions of the machine ca.:1,25 x 1,75 x 2,5 m - XD22 standalone-drying unit with180l-OTX-hopper (construction year 2016) and mobile frame CRD23 - internal and external material of the OTX180 hopper of stainless steel with shockproof Spyro-covering - hopper-door with viewer-device - programming only requires 2 para... more
2
OVERVIEW: Brand: Kloeckner Desma Model: 956.050 ZO Application type: Injection Moulding Machine type: Rubber Injection Presses Availability: Immediately Construction year: 1999 Production hours: 33221 Location: Germany Origin country: Germany GENERAL DATA: Gzkwxyboe Measurements width: 1410 mm Measurements depth: 1520 mm Measurements height: 3200 mm Machine weight: 3100 kg CONTOL UNIT: Brand: DESMA Model: DRC 1000 INJECTION UNIT: Stroke volume: 130 cm³ Injection pres... more
1

Temperature control units GWK teco cs 90

Schwäbisch Gmünd , GermanyGermany
6698 km
2003
good (used)
Temperature controllers gwk company Wuwn0 more
5
warehouse no.: 502422 manufacturer: BATTENFELD Typ: BA 500-200 CDK Controller Unit: UNILOG 4000 year of construction: 1997 The locking unit for this CDK series consists of a 5-point toggle lever system. This is driven centrally by a hydraulic cylinder. This system allows very high speeds to be achieved. Irrespective of this, the energy consumption of this series is minimal. This used Battenfeld injection molding machine can be inspected by us in the warehouse by appointment in the Pr... more
5

Cutting mill Dreher S 42/100 GFS

Zuzenhausen, GermanyGermany
6611 km
excellent (used)
5-blade rotor 2 Statormesserreihen Rotor diameter 420 mm Mudxcs Working width 1000 mm Inlet cross section approx. 420 x 1000 mm Drive motor 75,0 kW With noise protection equipment more
4
Window rubber, cutting machine, seal cutters -Anschläge 2 x Qlbudt9gf Dimensions 2500/600/H1000 mm Weight 15 kg more
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close