Used extruders & extrusion lines for sale (193)

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Cgsdpfx Asyyw T Ueb Uor Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V • Power: 1000 W • Screw diameter: 20 mm • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials • Material development • Color and mixing tests

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Cedpfohgq Ahox Ab Ujgr Commissioning and testing available upon request. In stock

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled Cjdpex Dkmgofx Ab Uogr • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Codpfoyc Sfpsx Ab Uogr Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Codeq R Tkwspfx Ab Ujgr Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, power: 30 kW (40.79 HP), Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper) You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned. Cgodpfx Absuxa Abj Usr

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d Cgodpfewxvadsx Ab Uor fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 7 / 8939 / 05 / 21, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE DC-motor with 37 kW capacity screw dimensions : diameter 50 mm – 30 L/D Cgsdpfow Np Tksx Ab Uor Grooved feeding zone With manual screen changer Fully functional You are welcome for inspection this (and further) extruders in our warehouse Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 1993, condition: good (used), functionality: fully functional, machine/vehicle number: RH 241-1-50-30v, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter Cgodpfx Abepy Eygj Ujr The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. Cgedpeby Rfpofx Ab Uer We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2026, condition: new, functionality: fully functional, new PMH filament line Codpfxsch Sfqe Ab Usgr extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, with cooling bath, puller and winder with guiding device Cgedpfjf Uc Ursx Ab Uor

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Codpfx Aeiv H Ekob Usgr This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, machine/vehicle number: 32531, Used Reifenhäuser extruder Type: RH 801-1-90-30 with one screw D = 90 mm - 30 L/D equipped with ceramic heaters and cooling air fans DC motor, power 103 kW Year of manufacture: 12/1990 Known plasticizing capacity: 250 kg with PP granulate Cgodpfx Abew Np S To Ujr The plasticizing capacity depends on the material and shape Fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Cgodpfjyx Dwkox Ab Ujr Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Cgsdpfx Abeyx Dx Ie Uor Condition: very good, like new Remark: Very few operating hours

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Codpfx Abeyx Dxue Usgr Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Cjdpfx Ajyx Dw Dob Ujgr Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Cgjdpswg R Rtjfx Ab Uor

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm The pipe head was in operation for about 1 year, due to business closure. Cgodpfswqgitox Ab Uer Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: good (used), Year of construction: 1994, Model: NE 12 Screw type: Single screw Year of construction: 1994 Screw diameter: 130 mm L/D ratio: 30 L/D Drive power: 350 kW Including: • Machine was in production when dismantled • Machine was producing 710 mm pipes Cgjdeyxpbujpfx Ab Usr • Output on HDPE approximately 1,000 kg/hour • 800 mm extrusion head

Year of construction: 2013, condition: good (used), Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Year of construction: 2013 Cgedpjyxn U Tsfx Ab Uer Screw diameter: 38 mm L/D ratio: 30

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Brand: Kuhne GmbH Cjdpfx Aboyxn T No Ujgr Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1/10/2025, control cabinet height: 1,000 mm, Extruder FI 25, 3 heating zones in the barrel + 2 heating zones in the die head, designed for universal use with a nitrided plasticizing system. - Plasticizing unit fi 25 mm, nitrided - Barrier screw with mixing tip (for hard PVC) - Output torque on screw 636 Nm - maximum screw speed 80 rpm - Screw start interlock to prevent underheating - Barrel equipped with feed zone cooling (liquid cooled) Csdpextf Hgefx Ab Uegr - 3 barrel temperature control zones - Heating-cooling set (band heaters, cooling fan) - Lenze gearmotor with 5.5 kW motor - hopper - Stepless speed control via potentiometer and inverter - Temperature control with Omron controllers for full monitoring - Heater current measurement - heater burnout protection - PID heating tuning function - type J thermocouples - Die head with 2 heating zones, no cooling

Year of construction: 2020, condition: excellent (used), functionality: fully functional, LICHTER LRK 200 PVC PIPE HEAD FOAM CORE PIPE HEAD - THREE-LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters from 100 mm to 200 mm The pipe head was only lightly used due to shutdown of operations. Condition: in very good condition Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Cgedpfx Aoyxtnrsb Uer Germany