Used Extruder Screws for sale (5,119)

Year of construction: 2020, condition: new, functionality: fully functional, Single Screw Extruder Screw diameter: 25mm / 25 LD Motor 2,2 kW Die Head available Feeding system available Gujdpfxefw Rige Af Sjb waterbath and pelletizer available Visit and Trial possible.

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, Extrudex single-screw extruder Technical data: Throughput: 300-500 kg/h depending on input material Year of manufacture: 1995, but completely overhauled in 2018 and as good as new since then Guodpjyrn Rtefx Af Seb Scope of supply: Extruder Complete control system Screen changer "Kreyenborg" K-SWE 150 Water bath Strand die Vibrating screen (classifier) smaller peripheral devices For an additional €3,000, a strand pelletizer is available.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels Gujdsycuuyjpfx Af Sjb • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm Gujdpoy A H Umjfx Af Sjb • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome Guedpfxjiyyndj Af Seb

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Guedpfxsiyynws Af Sob > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, Manufacturer : Clextral Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Gedpfxsy Abcls Af Soub Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Year of construction: 1998, condition: used, Manufacturer : Clextral Model : BC 45 Year : 1998 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion AC motor: 25 kW Length of screw/barrel: 1800 mm Screw elements: nominal diameter 55 mm. L/D : 33 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.) Gujdpeyzt Uksfx Af Sjb

Year of construction: 1990, condition: used, Manufacturer : Clextral Model : BC 45 Year: 1990 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire DC motor: 21 kW Guodpfjyzt Udex Af Sjb Length of screw/barrel: 1500 mm Screw elements: nominal diameter 55 mm. L/D : 27 Included in the package: Granulator, water pump and control panel Peripheral equipment not included but available on request: Dosing unit. (Its integration may be subject to a feasibility study and a supplementary quotation.)

Year of construction: 2016, condition: as good as new (ex-display), Kategorie / Category: Doppelschneckenextruder / Twin-screw extruder Nummer / Number: DE27621 Hersteller / Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Year of manufacture: 2016 like new, less than 100 operating hours Screw diameter / Screw diameter: 2x Ø 127,0 mm L/D: 28:1 (extension of the processing unit possible / extention of processing unit possible) Antrieb / Motor: 250,0 kW (AC) - Wasser gekühl / water cooled Details: co-rotor, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and barrels, 1 x Berstorff ZSFE 120 side feeder - Control system: Siemens S7 with screen control The offer does not meet your expectations? Please visit our website Plama or send us your detailed inquiry, we have the right product for almost every budget. Gsdpfx Afsiux Nme Soub

Year of construction: 2000, condition: excellent (used), Category: Twin-screw extruder Gsdon Nxl Sjpfx Af Sjub Number: DE27669 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 40 Year of manufacture: 2000 Capacity: 250 – 450 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Motor: 110 kW Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing with segmented screws and barrels Includes a completely new control cabinet This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Guodpfexu Db Esx Af Ssb

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Gjdpoxykcgofx Af Soub Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Year of construction: 2012, condition: excellent (used), Category: Twin-screw extruder Number: DE27691 Manufacturer: Feddem Type: DEC 72 MTS Year of manufacture: 2012 Capacity: 400 – 700 kg/h Screw diameter: 2 x Ø 72.0 mm L/D: 32D, including housing extension to 42D Drive: 168 kW Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing – 2 side feeders, 6 Schenk gravimetric dosing units, ECON EUP 600 underwater pelletizer, Trendelkamp classifying screen, degassing, vacuum pump, BSG control system Guedpfjvk Sgfjx Af Sob Very nice complete system with only approximately 3,500 operating hours. The offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry, we have the right product for almost every budget.

Year of construction: 2006, condition: excellent (used), Name: Used twin-screw extruder Plama number: DE27676 Manufacturer: Leistritz Type: ZSE 130 GL Year of manufacture: 2006 Screw diameter: 2 x 130 mm Length L/D ratio 35 D Gedpfoqqh Unex Af Seub Motor: 500 KW Material: PE, PP, PS, ABS + fillers Capacity: 1000 - 2000 kg - (depending on material) Control system: Currently without control cabinet, but can be offered separately Details: Co-rotating, degassing, segmented screws and barrels Options: Screen changer, dosing, granulation, control cabinet This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Twin-screw extruder Guodpfx Afet Eqvds Seb Ref. No.: DE27678 Manufacturer: Leistritz Type: ZSE 27 MAXX Year of manufacture: 2007 Screw diameter: 2 x Ø 27.0 mm L/D: 40D Drive: 33.6 kW Details: Co-rotating, segmented screws and barrels, 1 x atmospheric degassing, 1 x vacuum degassing including vacuum pump Options: Granulation, dosing, side feeder This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Gedpfx Afjx Dip Ts Seub Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Year of construction: 1999, condition: used, Manufacturer : Clextral Model : EVOLUM+ 53 Year : 1999 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire AC motor: 130 kW Length of screw : 2120 mm Screw elements: nominal diameter 53 mm. Guodpfxjyy S Iye Af Seb L/D : 40 Barrels : 10 units Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.) A wide range of applications: fish feed, pet food, snacks, meat substitutes…

Year of construction: 2018, condition: used, Manufacturer : Clextral Model: EVOLUM 32 B135 (Type F Food Industry) Year: 2018 Type: Twin-screw extruder   Screw elements: nominal diameter 32 mm. L/D : 24   Gusdpsyy S Itefx Af Sjb Barrel modules: 6 units Barrel module dimensions: Ø 99 mm, length 128 mm Screw speed: max 1200 rpm AC motor: 37 kW (2000 rpm)   Feed hopper Cooling of the barrel and unit Heating: no, this request may require a separate quote. 2 pumps 2 gravimetric feeders: - Manufacturer: Brabender - Models: DDW-M-DDSR20 - Year: 2018 and 2020 - Capacity: 2 to 10 kg (2020) and 30 to 70 kg/h (2018)   Technical documentation available Electrical cabinet + HMI (previously used for monitoring; adaptation required). Machine weight: 2,200 kg

Condition: good (used), Year of construction: 2009, Conical Twin-Screw Extruder - Manufacturer: WEBER, retrofitted by INDEXT Guedjy Hpm Tspfx Af Seb - Model: CE7 - Year: Retrofitted in 2009, originally built in 1982 - Parallel double screws ø51 to 104mm - 5 heating zones on the barrel + 2 cooling zones - Motor: 38kW - Up to 35 rpm - Up to 250 kg/h depending on material and tooling

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Gsdohgq Ahopfx Af Seub Commissioning and testing available upon request. In stock

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW Gujdpfx Afjx Dkmgj Sob • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned. Gedsyc Sfpjpfx Af Soub

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Gujdpfoyztagex Af Seb Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 2025, condition: excellent (used), We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction • Mobile: base plate with heavy-duty castors – easy to position Gujdpfoxxim Ijx Af Seb Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock