any replacement part for BettfrÃ¤smaschine MECOF spindle diameter = 63 mm Thread length = 1,450 mm Overall length = 1,715 mm thread pitch = 20 mm nut diameter = 95 mm flange diameter = 140 mm + 6 ball bearings
Ballscrew Y axis Author 504, L = 1984 0586312002E hand, almost without clearance, very well preserved also fits several other machines of series installation and calibration possible, please ask for offer
Screw air compressor Atlas Copco GA 708 PE
Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkuehlt.
Usable volume flow rate, in accordance with DIN in 1945 at the outlet from the compact system measured and related to Ansugbedingungen pe at maximum operating pressure: 8 bar 122 1/s; 7.32 m ³/min
The compression system is designed for operating pressures of 4 to 8 bar
We offer you, an assembly work stations / screwdriver as shown.
Fixed price from stock Warstein!
Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14.
The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistakes in the descriptions and offerings are subject to change!
drive power: 37 kW
Pressure capacity: 10 bar
intake pressure max.: 1,0 bar
volume throughput: 5,43 m³/min
revolutions per minute of the motor:: 3000 U/min
intake pressure max.: 1,0 bar
Compressor device with dryer and pressure air tank
compressor: Compair L37-10;380V; 3000 rpm; L:1,5xB:1,1xH:1,4m
dryer: AIR DRYER, Typ: Com 90, [...] R407C;[...] 16bar; Temperature 55°C
pressure air tank: Fabrikat Boge, content 1000 Liter; L:2,1xDm=0,83xB:1,05m
Kompressor: Comp... more
COMPAIR screw compressor
Model year 2011, CE mark
Digital PLC control, final compression pressure 13 bar
Engine 15 kW
Engine speed ~ 3,000 rpm
Flow 2.26 m ³/min
Soundproofed only 68 dB(A)
Weight approx. 440 kg, dimensions Lxwxh 800 x 670 x 1,160 mm, very good, checked state
used from Commons resolution:
1 x PA screw feeder unit steel frame BJ. 2007
2 x PA ZSG 6A
1 x PA dental scaler 6A
1 x PA vibration conveyor Trogmasse Lxwxh: CA. 500 x 165 x 150 mm
1 x PA vibrator Ø 350 mm
1 x PA vibration conveyor – length: approx. 500 mm was pumping nuts (Telle Ø 17 mm)
1 x PA weight loss unit - travel: 230 mm
Dimensions Lxwxh 1200 x 850 x 1650 mm
There are 2 identical systems.
feed pressure: 10 bar
liter capacity: 3000 l
volume capacity: 4,05 m³/min
Number of working hours: 16160 h
total power requirement: 30 kw
weight of the machine ca.: 0,67 t
space requirements of the machine approx.: 2,2x0,9x1,65 m
compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar
air pressure tank make Otto Boge 3000l , tank diameter 1300mm, height=2,9m, 0,8t
YOM 1971, operational pressure 10,8 bar
Machine available immediately:
RENNER RS 90 oil-injected screw compressor,
The compressor is in good condition with operating hours.
Pressure: 10 bar
Rated power: 11,0 kW
Delivery quantity: 1,54 m³ / min
Sound level: 81 dB (A)
Compressed air output: 1/2 "
Dimensions Length x Width x Height: 1910 x 610 x 1350 mm
Weight: 350 kg
Operating hours: 1362 Bh
Warranty: 6 months from date of purchase more
feed pressure 7,5 bar
Effective free air delivery 820 L/min
Required air-pressure G 3/4 "
motor 230 Volt AC
dimensions of the machine ca. 950 x 550 x 900 mm
weight of the machine ca. 185 kg.
Crane traverses different types: load capacity of 40 to x approx. 4 m long, 20 to x approx. 5 m long, 10 to x approx. 3.70 m long
2 to about 3 m long, 4 to x approx. 2.0 m long-4 to about 3 m in length (approximately)
feed pressure 10 bar
liter capacity 950 m³/min
Number of working hours 33231 h
voltage 400 V
total power requirement 7,5 kW
weight of the machine ca. 400 Kg
Receiver 500 L
dimensions of the machine ca. 2,20 x 0,70 x 1,55 mm
- Fabr. No.: 3020
- incl. air coolant
Model: SP 32/575
Year of build: 1990 - work instead tested
Force of pressure: 32 t
Table area: 575 x 470 mm (T-slot: 22 mm)
-use, as seen however no guarantee-
feed pressure: 15 bar
liter capacity: - l
total power requirement: 45 kW
control: Elektronicon II
volume capacity: 120 l/s
weight of the machine approx.: 1155 kg
2 pcs of screw compressor available
Atlas Copco Elektronicon II Control (Graphic Plus Control)
- compressor make AIRTEC, type DIS K.26 , with integrated refrigerant dryer and motor, coolant = water
- air dryer tank, standing, content 321 liter, tank size Ø 300 x 600mm, operation pressure 11 bar
air outlet in t... more
feed pressure 8,0 bar
liter capacity 3,53 m³/min
Number of working hours 22.496 h
voltage 400 V
total power requirement 22 kW
weight of the machine ca. 435 kg
dimensions of the machine ca. 1,30 x 0,80 x 1,20 mm
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.