Used Recycling for sale (2,457)

Year of construction: 2024, condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 264 kW - Machine Weight : 85.000 kg Fpedsdfcpaspfx Aftor - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up Fpedpsvrw Anofx Aftor the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Fpjdpfx Afsxcuvietjr Frequency-controlled feed belt This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: repair required (used), Year of construction: 2003, functionality: not functional, It is a complete line for film recycling. It was bought together as complete line. Components • Shredder TRI TUR TM 3 model with hydraulic drive and 75 kW motor. • Pre-washing tank for contaminated film. Bottom sludge discharge. Made of stainless steel! • Water grinder L5 650/1000 10 rotating and 4 stationary knives • Centrifuge Fedjx Ddchopfx Aftopr Mainly available as a single item! Used, in good condition, has not been in operation for a long time, requires repair. The grinder is currently in operation and can be viewed in Dunaújváros(Hungary)

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Fpjdpfoxrta Ejx Aftsr Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, Alligator shear brand new AVAILABLE NOW, ex work IUT Beyeler AG, DE-06188 Landsberg Financing and rental possible. Fpsdpfxjhq Nlgs Aftor We are looking for used alligator shears! The McIntyre 407 Alligator shear is a non ferrous shear which is both affordable and efficient. It has a 407mm 16″ blade length and enough power and speed to handle a wide variety of cutting tasks. This versatile alligator shear was built originally for scrapyard use so is robust enough to withstand difficult working environments. It is now our most popular shear with thousands in daily use worldwide. The McIntyre 407 non ferrous scrap shear can handle: Automotive scrap Whole gear boxes Cylinder heads and blocks Oversized gate valves And of course all the usual non ferrous metal cutting tasks. It can also handle ferrous metals if needed.

Year of construction: 2025, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm. Fpedpsbbr Ipofx Aftor

Year of construction: 2025, condition: new, Our heavy-duty hammer mill is engineered for efficient crushing and high-capacity processing. Built with durable steel construction and optimized rotor design, it ensures outstanding performance with low energy consumption. Fpodpfx Ajxy Agqofter We offer custom manufacturing options depending on your required capacity, material hardness, and application. For detailed pricing, technical specifications, or bulk orders, feel free to send us a message. We provide fast production, reliable customer support, and worldwide shipping.

Condition: new, Year of construction: 2025, functionality: fully functional, Young used sink float tank for separating hard plastics, can wash/sort. Fodpfxevy Dumo Aftspr Made of stainless steel 304, also suitable for salt solutions.

Year of construction: 2013, operating hours: 10,000 h, condition: used, functionality: fully functional, Recent 75 Extruder - Re-pelletizing line Fpodpfox Ddatjx Aftsr Austrian-made, designed by engineers who left EREMA. The manufacturer was later acquired by EREMA. First commissioning: March 2013 Current operating hours: ~10,000 hours Usage history: 2013–2018: operated in a polyethylene film blowing plant, with technological waste 2018–2020: operated in a recycling plant, with irregular utilization 2020-2023: operated intermittently The line is for sale as a complete extruder, equipped with conveyor belts, and a metal detector. Materials processed by the extruder: LDPE, LLDPE, HDPE, PP, POM (According to the accompanying manufacturer's description, it is also suitable for granulating other materials.) COMPONENTS - With metal detector, - Large feed belt - Agglomeration unit - Stainless steel drum, diameter: 1000 mm - Drive motor: AC 55 kW Main parameters of the extruder Screw diameter: 75 mm Screw drive: 65 kW Consists of 4 separate motors that switch on depending on the load! Favorable energy consumption! L/D ratio: 35 D Variable screw speed Touchscreen control panel Double degasserer Double filter changer Head cutting section with shaking table Centrifuge Liquid cooler.

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Fpjdpfx Aeu Thcveftsr Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes Fpedsu Dg Uhepfx After non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Year of construction: 2025, condition: new, To separate and sort after the specific weight from light and heavy fraction. Fjdpfx As Snd Nsftspr Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours Fpsdpfoxm Uf Sox Aftor

Year of construction: 2023, condition: new, Stock machine Fsdpfx Ajhwdvcjftopr Completely redeveloped high efficiency centrifuge based on our many years of production experience with the predecessor of this centrifuge, we have made various improvements with regard to maintenance costs, downtime and wear and tear parts.

Condition: new, Year of construction: 2025, Set of cones(concave + mantle) Maxtrak 1000 Medium Coarse - very good quality. 22%Mn, with SPECTROMETER CERTIFICATE, highest quality on market! Fodpfx Aoigvfvoftspr Parts number: 603/9052-22 MC + 603/9106

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Fodpevf E Avofx Aftjpr Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system. Fjdpsua D Alsfx Aftjpr

Condition: good (used), Young used vibrating sieve to filter process water. Made of 304 stainless steel, also suitable for salt solutions. Fpedpfevy Dy Nox Aftor

Year of construction: 2025, condition: new, Overband magnet Length: 2500 mm Height: około 400 mm Width: 1000 mm Belt width: 750 mm Magnet width: 500 mm Magnet length: 1044 mm Power: 1,5 kW(hydraulic or electric) Fodjh U R Tgjpfx Aftopr Magnet field: 400 Gauss(may catch 100 mm pieces from maximum distance 300 mm Overband new, 12 months warrenty,

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Fpsdpfju Thkaox Aftor Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Fodpfx Aeiqxtbsftjpr WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. If you're interested in our products, please contact us!

Condition: new, Year of construction: 2025, Built on order Fpedpjkzg Sdofx Aftsr Vibrating sieve to filter the process water. Process water is preferably used in a closed circuit. The authorities also see this as the ideal solution. Obtaining the permits for a recycling plant is greatly simplified by the use of a closed circuit and the costs of using the plant are significantly lower.

Condition: new, Year of construction: 2025, Stock machine Completely redeveloped high efficiency centrifuge based on our many years of production experience with the predecessor of this centrifuge, we have made various improvements with regard to maintenance costs, downtime and wear and tear parts. Fpedpfekzg Saex Aftor

Condition: new, Year of construction: 2025, In stock: The STF 3.0 floating sink separator with our highly efficient SP1000 Mk2 centrifuge and our VS1 water screen. A compact but powerful washing system that is low-maintenance and can wash/sort up to 3000 kg/h of hard plastics. The machines are made entirely of 304 stainless steel, so salt solutions can be used without any problems. Fjdpfsxhf Nwex Aftopr An excellent starting point for a good homemade zinc float installation. The machines are in stock and can therefore be delivered within a week. Ask us for further information.