Used Cable Ties for sale (4,011)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 Knodpfxoyzr Nms Ahajc • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: excellent (used), Catalog number: 7502 TECHNICAL DATA Infeed carriage DTBC-P Wheelbase 750mm Diameter of the infeed material 100-800mm Total side travel 160mm Log rotation to the left and right 360 degrees Forward and reverse travel speed variable Hydraulic pump motor power 5.5kW Auxiliary carriage DTCB Wheelbase 750mm Side travel range 160mm Log rotation to the left and right 360 degrees Side travel motor power 1.1kW Infeed carriage dimensions (L/W/H) 2850/1400/1500mm Auxiliary carriage dimensions (L/W/H) 950/650/750mm Total weight 1450kg ADVANTAGES Kedpfx Ahszrnxvoaenc – Made in Poland – Robust construction – Includes cables and chains – Used machine, very good condition, after a major overhaul (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or stacks from the infeed side of the saw, with a diameter range of 100 mm to 750 mm. The infeed carriage is designed to feed logs and stacks to the saws, with a diameter range of 100 mm to 750 mm. The device for manipulating logs, namely for clamping the log in the clamps, performing transverse movement, and rotating the log, is powered by hydraulic drives. Net price: 59900 PLN Net price: 13930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business ties with the manufacturer.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Knjdpjz N A Npefx Ahaec Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 235.1068, Title: Komax Kappa 235 Automatic Wire Cutting and Stripping Machine – 2006 Description: For sale: Komax Kappa 235 automatic wire cutting and stripping machine, manufactured in 2006. The machine is suitable for cutting and stripping a wide range of cables and wires. Technical specifications: Manufacturer: Komax Model: Kappa 235 Year of manufacture: 2006 Voltage: 115/230 V Wire cross-section range: 0.22–35 mm² Flat cable processing: up to 40 mm width RS232 interface Cutting and stripping functions Knedpfx Ahozzpxceajc Extensive accessories and spare parts are included: Numerous cutting and stripping blades / knife sets V-blades Various blade holders Elastomer feed rollers Additional steel knurled feed roller set Various cable guides Guide tubes Inner-wire stripping unit Length measuring unit Additional mechanical parts and accessories Various original Komax spare parts A considerable quantity of tooling, blades, rollers, and spare parts is supplied with the machine, as shown in the photos.

Condition: excellent (used), Year of construction: 2023, operating hours: 391 h, functionality: fully functional, Coaxial cable stripping machine, Schleuniger CoaxStrip 6380, manufactured in 2023. This multi-stage stripping machine is designed for coaxial, triaxial, multi-conductor, and single-conductor cables. Cable diameter: min. 0.6 mm, max. 8 mm. Stripping length: max. 40 mm. Equipped with an air jet unit and a print SMI. Kjdpfx Aez Nw Iyshaonc

Condition: used, Thermo Fisher Scientific Optical Emission Spectrometer / Spark Spectrometer Thermo Scientific ARL 3460 Professional OES metal analysis system for the precise analysis of metallic materials For sale is a used optical emission spectrometer from the manufacturer Thermo Electron Corporation (now Thermo Fisher Scientific). The Thermo Scientific ARL 3460 is suitable for fast and highly precise analysis of metallic materials in laboratories, foundries, quality assurance, incoming goods inspection, as well as research and development. The system operates according to the principle of optical emission spectrometry (OES) and is supplied including an industrial PC, original software, and a USB license dongle. Technical data: Manufacturer: Thermo Electron Corporation Model: ARL 3460 Device type: Optical Emission Spectrometer (OES) Made in Switzerland Knjdpfx Aezkuftohasc Supply voltage: 230 V AC Mains frequency: 50 Hz Mains connection: 1 phase Power consumption: 3.5 kVA Software: Thermo WinOE Version 3.2.3 MP1 Gateway v1.0-90 ASLViewer v1.0-16 ASLEngine v1.2-1 Original USB license dongle included Measurement method: Optical Emission Spectrometry (OES) Spark excitation for material analysis Fast and highly precise metal analysis Analyzable elements (according to the installed spectrometer configuration): Copper (Cu) Chromium (Cr) Iron (Fe) Manganese (Mn) Uranium (U) Niobium (Nb) Titanium (Ti) Zirconium (Zr) Phosphorus (P) Sulfur (S) Boron (B) Arsenic (As) Tin (Sn) Carbon (C) Aluminum (Al) Calcium (Ca) Molybdenum (Mo) Equipment: Thermo Scientific ARL 3460 spectral analyzer Dell industrial PC Monitor Keyboard Mouse Original WinOE software Original USB license dongle SERCAL MP-2000 rare gas purifier Connection cables Service markings present Accessories as shown in the pictures Application areas: Material analysis Metal analysis Quality assurance Incoming goods inspection Foundries Steel mills Metal processing Testing laboratory Research and development Automotive Mechanical engineering Industry Dimensions (approx.): Width: 1,665 mm, Depth: 910 mm, Height: 1,190 mm Weight: approx. 450 kg Scope of delivery: Thermo Scientific ARL 3460 Dell industrial PC Monitor Keyboard Mouse Original WinOE software Original USB license dongle SERCAL MP-2000 rare gas purifier Connection cables Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear. Software starts correctly. Original USB license dongle included. Service and maintenance markings are present on the device. The table shown in the photos or other items not explicitly mentioned are not part of the sale. Loading by forklift is possible. Delivery by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m Kjdpfx Ahszphdtsajnc The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Schleuniger UniStrip 2100 – Automatic Wire Stripping Machine For sale is a Schleuniger UniStrip 2100 automatic wire stripping machine. The machine is in very good working condition and fully operational. All functions operate correctly, and the machine is ready for immediate use. Technical details: Manufacturer: Schleuniger AG Model: UniStrip 2100 / US 2100 Serial No.: 1770-2004 Power supply: 24 VDC Power consumption: 41 W Made in Switzerland CE certified Condition: Used Functionality: Fully functional The machine can be inspected and tested before purchase. Price: €1,000 Kedjz A D Thopfx Ahaenc Location: Hungary

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: Autosplice ACS 2000 Global Splice System, an industrial wire processing/splicing machine. Professional equipment for the series production of electrical wires and connections. The machine uses Autosplice Spliceband technology for creating various wire and component connections. Technical specifications: Manufacturer: Autosplice Europe GmbH Model: ACS 2000 Year of manufacture: 2012 Serial number: 110000450 Knjdpszx Edpofx Ahajc Power supply: 230 V / 50 Hz Power consumption: 2 A Required compressed air: 6 bar / 87 PSI Weight: 51 kg CE marking The machine is used and is in the condition shown in the pictures. Inspection and testing can be carried out while the machine is powered on. Location: 5720 Sarkad, Hungary. Sold by a company, with invoice. For further information, please contact us.

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Location: Switzerland, 8260 Stein am Rhein. Ksdpfoy D Ug Tsx Ahaonc Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: Ksdox It N Uepfx Ahaenc • Photos and further information available upon request 📩 Contact us for more information.

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: R-00708, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2024.11. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Knsdpfs Adt Sisx Ahaoc Year of Manufacture Robot: 2024.11 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2024.11 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: Knsdpfezgx H Hsx Ahajc MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00709, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Ksdpfx Aj Aduabehajnc Teach Pendant Cable Length (m): 12

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00707, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570 Knodpfe Aduazex Ahaec   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, LDS Shaker Spare Parts / Vibration Testing System Accessories LDS V8-440 / HBT750C Spare Parts and Accessories Package 30 individual parts – sensors, filters, cables, and mechanical spare parts Mostly individually packaged and visually in new condition For sale is a comprehensive spare parts and accessories package from the inventory of an LDS V8-440 / HBT750C vibration testing system. The collection consists of various spare parts for electrodynamic vibration testing systems, including filter elements, pressure sensors, connecting cables, and mechanical components. Depending on compatibility, the parts are suitable as a stock of spare parts for the maintenance, repair, and servicing of suitable shaker systems. Technical Data / Parts List: Manufacturers / Brands: LDS, BD Sensors, WIKA, and HYDAC Equipment Type: Shaker Spare Parts / Vibration Testing System Accessories Original System Assignment: LDS V8-440 / HBT750C Total Scope: 30 individual parts in 15 positions LDS Filters and Filter Elements: 4x LDS V300232 – Filter mats 25 x 25 mm 2x LDS V500133 – Filter elements for vibrators 1x LDS V500135 – Filter element for HBT sliding table 1x LDS V500131 – Oil filter for LPT 1x HYDAC 1260880 / 0030 D 020 ON – Hydraulic filter LDS Mechanical Spare Parts: 2x LDS V300089 – Target / Reference element for V8/V895 1x LDS V300087 – Target / Reference element 1x LDS V300135 – Steel bushing / ball joint 1.5 inches 1x LDS V300666 – Steel guide shaft for shaker armature 2x LDS V300122 – Spare parts, exact designation unknown Sensors / Pressure Measurement Technology: 5x BD Sensors DMP 331 – Industrial pressure transmitters 1x WIKA S-2631301 / P.8392006 – Pressure sensor / pressure transmitter Connecting Cables / Wires: 1x LDS V300187 – Electrical connecting cable 1x LDS V300186 – Grounding connecting cable 6x Shaker receiver cables – signal and connecting cables Features / Special Characteristics: Extensive spare parts inventory Original part numbers on numerous packages Several filter elements for vibrators and sliding table Pressure transmitters from various manufacturers Electrical connecting and signal cables Mechanical spare parts for shaker systems Mostly individually packaged components Application Areas: Electrodynamic vibration testing systems LDS shaker systems Maintenance and servicing Spare parts supply Vibration and shock testing technology Hydraulic and pressure measurement technology Industrial testing systems Compatibility: The spare parts package comes from the environment of an LDS V8-440 / HBT750C vibration testing system. Individual packages show additional model designations such as V8/V895, V810, or V850. The actual suitability and compatibility of the respective spare parts should be checked before use using the part numbers and technical data. Condition: Used stock / Used Mostly individually packaged Visually in new or unused condition Functionality testing of the sensors is not documented Optical condition according to images Scope of Delivery: 1x complete LDS shaker spare parts and accessories package 30 individual parts according to the listed parts list Accessories as shown in the images The table or other items not explicitly mentioned in the photos are not included in the sale. Shipping is possible. Kedpfxsz Spt Hj Ahaenc Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost. Knjdpfx Asz Rqcmjhaec

Condition: good (used), For sale are 2 identical helical conveyors/sorting systems: 1 with sound-dampened cladding. Bowl diameter: 820 cm Bowl depth: 36 cm Dimensions: Knedehrntmjpfx Ahajc Without cabin: 125 x 158 x 135 With cabin: 125 x 158 x 128 The cabin has several access doors. Various holders for quick-assembly screws were sorted (cable ties are also likely possible). The helical conveyors are functional, and the control systems for each machine are available. The machines can be inspected and/or tested by arrangement. Machine purchase/sale: BUYING/SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2009, operating hours: 7,515 h, GUIDETTI SINCRO 950 – Cable Granulator, 37 kW Main Motor, Dry Separation Table, and SIMCO Anti-Static System We offer a used GUIDETTI SINCRO 950 cable recycling machine designed to recover copper through granulation and dry separation of metal from cable insulation. The process combines cable granulation in a knife mill with separation on a vibrating dry separation table. The machine is suitable for cable recycling facilities and non-ferrous metal processing companies. Technical specifications: Manufacturer: GUIDETTI Recycling Systems – Italy. Model: SINCRO 950. Year of manufacture: 2009. Serial number: 9501000025. Machine weight: 3,000 kg. Supply voltage: 400 V. Frequency: 50 Hz. Electrical supply configuration: 3P + PE. Full-load current: 120 A. Marking: CE. Separation method: dry separation on a vibrating table. Main granulator: Main motor power: 37 kW. Rotor diameter: 420 mm. Kjdpfe Abwuvsx Ahaonc Rotor width: 900 mm. Cutting configuration: three-row V-shaped cutting arrangement. Additional equipment – SIMCO anti-static system: 4 ionising bars installed above the separation table. Bar model: SIMCO P-Sh-N. 2 SIMCO A2A7S high-voltage power units. Power unit supply: 230 V AC, 50 Hz. Bar operating voltage: 7 kV AC. Power unit protection rating: IP54. The SIMCO system neutralises electrostatic charges generated during material processing. It reduces the attraction and adhesion of insulation particles, supporting the separation of plastic from copper. Please contact us for further information or to arrange a viewing.

Condition: used, Year of construction: 2009, operating hours: 7,515 h, GUIDETTI SINCRO 950 – Cable Granulator, 37 kW Main Motor, Dry Separation Table, and SIMCO Anti-Static System We offer a used GUIDETTI SINCRO 950 cable recycling machine designed to recover copper through granulation and dry separation of metal from cable insulation. The process combines cable granulation in a knife mill with separation on a vibrating dry separation table. The machine is suitable for cable recycling facilities and non-ferrous metal processing companies. Technical specifications: Manufacturer: GUIDETTI Recycling Systems – Italy. Model: SINCRO 950. Year of manufacture: 2009. Serial number: 9501000025. Machine weight: 3,000 kg. Supply voltage: 400 V. Frequency: 50 Hz. Electrical supply configuration: 3P + PE. Full-load current: 120 A. Marking: CE. Separation method: dry separation on a vibrating table. Main granulator: Kodo Abx Idjpfx Ahasnc Main motor power: 37 kW. Rotor diameter: 420 mm. Rotor width: 900 mm. Cutting configuration: three-row V-shaped cutting arrangement. Additional equipment – SIMCO anti-static system: 4 ionising bars installed above the separation table. Bar model: SIMCO P-Sh-N. 2 SIMCO A2A7S high-voltage power units. Power unit supply: 230 V AC, 50 Hz. Bar operating voltage: 7 kV AC. Power unit protection rating: IP54. The SIMCO system neutralises electrostatic charges generated during material processing. It reduces the attraction and adhesion of insulation particles, supporting the separation of plastic from copper. Please contact us for further information or to arrange a viewing.

Condition: good (used), mileage: 502,000 km, power: 302 kW (410.61 HP), first registration: 12/2009, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: steel-air, total length: 9,100 mm, total width: 2,500 mm, total height: 2,900 mm, Year of construction: 2009, Equipment: AdBlue, air conditioning, cruise control, differential lock, trailer coupling, = Additional options and accessories = - Differential lock Kodpfx Aez Rpdvohaonc - Speed limiter - Air suspension - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Pre-heating system - Towing jaw = Further information = Front axle: Steering; Tire tread left: 70%; Tire tread right: 70%; Suspension: Leaf spring Rear axle 1: Twin tires; Differential lock; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Rear axle 2: Tire tread left: 70%; Tire tread right: 70%; Suspension: Air suspension Number of cylinders: 6 gVW: 26,000 kg Technical condition: good Optical condition: good Please contact Andre, Henri or Andre for further information.

Condition: excellent (used), mileage: 635,300 km, power: 272 kW (369.82 HP), first registration: 08/2016, fuel type: diesel, tire size: 385/55/22.5, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: intarder, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 11, emission class: euro6, suspension: steel-air, total length: 7,170 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, fog lights, onboard computer, power assisted steering, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - High beam headlights - Air horn - Particle filter - Radio/CD player - Rotating beacon - Sun visor - Tool kit - Power take-off (PTO) - Central lubrication system - Tow hitch = Additional Information = General Information Year of construction: 2016 License plate: 21-BHN-3 Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55/22.5; Max. axle load: 9000 kg; Steered; Suspension: Leaf spring suspension Rear axle: Tire size: 315/60/22.5; Dual tires; Differential lock; Max. axle load: 11500 kg; Suspension: Air suspension Weights Unladen weight: 8,900 kg Payload: 11,600 kg Gross vehicle weight (GVW): 20,500 kg Functional Body brand: HTS 1425.5.130 CABLE SYSTEM 14 TON Condition Technical condition: very good Kjdpjw Hqvcsfx Ahaenc Optical condition: very good DAF CF370FA 4x2 WITH HTS 1425.5.130 CABLE SYSTEM 14 TONS EURO 5 L PACKAGE 370 HP DRIVE 4X2 WHEELBASE 450 CM DAY CAB WITH AIR CONDITIONING, RADIO/CD PLAYER, 27MC MANUAL TRANSMISSION AIR SUSPENSION, INDICATOR LAMP TOW HITCH, TOOL KIT HTS 1425.5.130 CABLE SYSTEM 14 TONS CONTAINER LOCKING SYSTEM CENTRAL LUBRICATION IMMEDIATELY AVAILABLE FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINERY FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Kedpfx Ahsz R Dz Asasnc Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Shredder + WS15 granulator + belts Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. Knedpoza Ahcefx Ahajc System overview 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 1x ICS CONTECT Shredder 40/60 VGA 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Condition: used, Trumpf HAAS Type: HAAS Laser HL556D Wavelength of laser light: 1064 nm Minimum power: 5 W Maximum regulated power: 550 W Beam parameter product: 25 mm-mrad External dimensions: Width 1250 mm, Height 1580 mm, Depth 720 mm Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pole, 63 A, 6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are connected to the connections and sealed with two hose clamps each. Kedszdrwgepfx Ahaenc Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20 V ± 10 %, 3P + PE, 50 Hz 20-01-38-00 V ± 10 %, 3P + PE, 60 Hz Scope of delivery: (Laser system, laser head, and replacement cable…) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.