Used Cable Channel for sale (4,762)

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Lodpfx Anszzk Rmocsag Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Laedezx S D Aepfx Ancsg Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be arranged by the buyer! The unit will be available from October 2026! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible Print Cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Laedpfxszx S Dvs Anceg Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90 % RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90 % RH, non-condensing Placement: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Weight in operation: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lifting system Interchangeable Print Cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cable Ethernet cable USB stick User manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SN24027024146, Year of construction: 2024, total length: 580 mm, total height: 910 mm, total width: 700 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Installed nozzle diameter: 0.4 mm Lsdozx S Eaepfx Anceag MACHINE DETAILS Voltage supply: 100–240 V AC Power consumption: Max. 10 A Mains frequency: 50–60 Hz Frequency band: 2,400.0–2,483.5 MHz Max. radio frequency output power: < 100 mW EIRP WLAN standard: IEEE 802.11 b/g/n Operating temperature: 18 °C for PLA up to 38 °C Max. humidity: Max. 85 %, non-condensing Dimensions & Weight Dimensions (W x D x H): 580 x 700 x 910 mm Weight with packaging: Max. 35.0 kg Weight without packaging: Max. 25.3 kg EQUIPMENT Satin powder-coated print bed PEI print bed Spool holder with material guide Power cable USB drive 5 × brass nozzle, 0.4 mm 5 × hardened nozzle, 0.6 mm Operating manual Testing information Note: Print head cable 3 must be replaced.

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Lajdpfx Aszx Dwnjncjg Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Lsdpfsz Duhxex Ancjag Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: excellent (used), Year of construction: 2024, Yokogawa WT5000-HG-F Precision Power Analyzer Manufacturer: Yokogawa Test & Measurement Corporation Type: WT5000-HG-F Model: WT5000 Machine Type: Precision Power Analyzer Date of Manufacture: 11/14/2024 For sale is a used Yokogawa WT5000-HG-F Precision Power Analyzer. This high-precision measuring system is suitable for demanding power, voltage, current, and energy analysis in research, development, test laboratories, power electronics, drive technology, and quality assurance. The modular design allows for the flexible use of various measuring elements and offers the highest measurement accuracy for modern testing tasks. Technical Data Model: WT5000 Version: HG-F Date of Manufacture: 11/14/2024 Measuring Modules: 7 slots Configuration: 760903 Current Sensor Elements (as shown in the pictures) Max. Voltage: 1000 V AC Sensor Power Supply: ±15 V DC Mains Connection: 100–120 V / 200–240 V AC Mains Frequency: 50 / 60 Hz Power Consumption: max. 650 VA Interfaces Ethernet (LAN) USB 3.0 USB Front Port GP-IB / IEEE-488 Video Out (XVGA) External Clock BNC Connectors Analog Pulse Inputs Features Large Color Touch Display Front-Side Control Panel Modular Design with Pluggable Measuring Elements 760903 Current Sensor Elements Multi-Channel Power Measurement Data Storage Function USB and Network Communication Rack Mounting Possible Power Cable Accessories as Shown in the Pictures Application Areas Precision Power Measurement Energy Analysis Active, Reactive, and Apparent Power Measurement Power Electronics Electric Motor and Inverter Testing Inverter Testing Battery and Accumulator Tests Automotive Test Laboratory Research and Development Quality Assurance Lasdjzhl D Ijpfx Ancsg Condition Used Optical condition as shown in the pictures. Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer 760903 Current Sensor Elements (as shown in the pictures) Power Cable Mounting Material / Accessories as Shown in the Pictures Scope of delivery includes only the items shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, mileage: 128,000 km, power: 110 kW (149.56 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, central locking, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3494]---- Your benefits with us: * Digital consultation via telephone or WhatsApp * Financing options available even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (technical inspection and emissions test) Lajdpfx Anezp Ty Tocjg * Nationwide delivery---- Summer offer: Upon request and for an additional charge of only €999, increase the trailer load capacity to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT shown German vehicle Regularly maintained Immediately ready for use Euro 6 standard First owner Special equipment: Storage compartment in the headliner of the driver's cab, aluminum strips at the sliding door entrance, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, grab handle on the rear pillar on the right side, fire extinguisher, vehicle without lowering, additional main key, rear door (opening angle 270 degrees), wooden floor in the cargo area, comfort chassis, comfort lighting in the passenger/cargo area, fuel tank with misfuelling protection, charging package dashboard (USB ports and 12V socket additionally), cargo area light LED, cable channel on the rear portal, cable channel on the side wall, multimedia system MBUX (7" touchscreen), hands-free system Bluetooth, steering wheel with multi-function buttons, smoker's package, seats in the driver's cab: driver's seat plus (with level seat surface), lockable storage compartment in the storage area above the front window, socket (12V connection) in the driver's cab, red fuel tank cap, step at the rear door, USB connection in the middle below the dashboard (charging function only), lining in the cargo/passenger area: high plastic (up to the roof), lashing rails in the cargo area - side wall on the partition strap, lashing rails in the cargo area - side wall on the roof frame Additional equipment: 3rd brake light, storage compartment above the front window, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag driver side, traction control (ASR), indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, automatic activation for headlights, grab handle for sliding door at the cargo area partition, electronic brake force distribution (EBV), driving assistance system: breakdown management, chassis: stabilization level I, noise reduction measure outside, body/superstructure: box high-roof standard, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, cargo area partition complete, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck registration, marker lights on the side, Mercedes-Benz emergency call system, engine 2.0 L - 110 kW CDI CAT, wheelbase 4325 mm, low emissions according to emission standard Euro 6d-TEMP, sliding door cargo/passenger area on the right, safety belt system with warning system (driver side), seat cover/upholstery: fabric, seats in the driver's cab: passenger seat adjustable, start/stop system, fleece battery 92 Ah, service interval display Assyst, heat-insulating glazing, permissible total weight 3.5 t ---- Would yo

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. Lasdeyzr Nmspfx Anceg - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 600 h, number of axes: 2, Plasma cutting machine manufactured in 2019. This KOIKE PNC-12 Extreme features an effective cutting area of 1,500 x 3,000 mm and a maximum programmed cutting speed of 3,000 mm/min. It includes a robust downdraft cutting table and a Cebora plasma power source with a maximum cutting current of 110 A. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE PNC-12 Extreme machine we have for sale. Contact us for further details. • Operating hours: approx. 600 h • Condition: Excellent • Effective cutting area: 1,500 x 3,000 mm • Rapid travel speed: 4,000 mm/min • Maximum programmed cutting speed: 3,000 mm/min • Drive system: Rack-and-pinion X/Y with linear guides • Control unit: KOIKE D420, 7-inch colour display, USB and manual program input • Torch control features: Initial height sensing, arc-voltage height control, collision/breakaway protection • Plasma cutting performance: • Maximum cutting current: 110 A • Recommended mild-steel cutting capacity: up to 35 mm • Maximum cut: approx. 40 mm • Maximum severance: up to 50 mm • Mild-steel piercing capacity: up to 20 mm • Duty cycle: 90 A at 100% / 95 A at 60% / 110 A at 50% • Oxy-fuel cutting performance: • Mild-steel cutting capacity: up to 80 mm (depending on nozzle, gas type, material and cutting conditions) • CNC-controlled piercing sequence Additional equipment • Plasma power source: Cebora Plasma Sound PC 110/T (Art. 336) • Machine torch: Cebora automatic torch with approx. 10 m cable package • Oxy-fuel: Original KOIKE motorised oxy-fuel cutting torch; automatic gas solenoid valves • Downdraft cutting table: Sideros Engineering Sirion 1000 (2019), S/N 1027/19 • Max air pressure: 6 bar • Max table load: 500 kg/m² • Design: Sectional/zoned downdraft table with central extraction channel Lasdjz Dhqajpfx Ancjg • Nesting/CAD-CAM software on USB drive • Available documentation and accessories

Condition: excellent (used), Year of construction: 2020, AKE Technologies Vehicle Shaker System Manufacturer: AKE Technologies GmbH Type: Vehicle Shaker System Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled test conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per stroke table, according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Activated functions: 8 input channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Lodpjzazm Rjfx Anceag Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance investigations Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. Scope of delivery AKE Shaker System for Vehicles Control and operating system Industrial control cabinet Operator computer Installed test software High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement, control and connecting cables Documentation and software media Tools and accessories as shown in the pictures Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Important note: All information is provided to the best of our knowledge, based on available documentation, software displays and nameplates. Deviations in technical data are possible. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. Lasdpfx Anjzzkvcscjg No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 1 months, positioning accuracy: 5 mm, Equipment: documentation/manual, The official FARO distributor is selling a demo unit – the FARO Orbis Premium mobile scanner. The package includes: - FARO Orbis Premium mobile 3D laser scanner - Datalogger portable control unit - 2 batteries - Battery charging station - Connection cable - Monopod tripod - Phone mount - FARO calibration certificate - Durable original case The unit is from 2025, comes with a calibration certificate, and has a valid warranty. It has been lightly used – for customer demonstrations and at trade shows. The mobile scanner is in excellent condition. It provides 3D laser scanning with 5mm accuracy, allowing for very fast scanning of large areas, buildings, and rooms. The stationary Flash mode allows scanning with 2mm accuracy. Technical specifications: - Accuracy: 5mm (2mm in Flash mode) - Scanning distance: 120m - LIDAR channels: 32 - Camera: 72MP - Operating time with 1 battery: 3-4 hours The unit is located in Riga, Latvia, and can be viewed in person or remotely. Lajdpfx Anozzdpvoceg

Condition: used, Year of construction: 2001, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Lasdpfx Anox E Ttbjceg Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop • Light barrier system controlled by machine controller

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Lodpfsx E Tmbex Anceag Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CMC 250 turbocode inserter for sale! 2014 the year of made Only 7 Million clics on meter! 16.000 envelopes /hr 60.000 A4 sheets/hr 2 rotary feeders with cameras Dual channel Pinless Hunkeler UW6 unwinder Tecnau cutters Tecnau waste exhausting system File based integrity system with Datalogic cams Address printing system Label attaching system Laodpfxjzza H Rj Ancsg See video and pictures!

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Lajdszu T Smopfx Ancjg Sold on behalf of a customer! Technical data without guarantee!

Condition: excellent (used), DEWETRON DEWE3-PA8-RM Power Analyzer Manufacturer: DEWETRON System: DEWE3-PA8-RM Chassis Type Plate: DEWE3-RM8 Revision: 1.1 Device Type: High-End Power Analyzer Design: Stationary 19" Rack-Mount Power Analyzer Country of Manufacture: Austria For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design, with a built-in TRION3-1810M-PA power module, as well as the connection and measurement accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measurement channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measurement range power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to type plate: 500 W Sensor supply: Integrated redundant sensor supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Equipment: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current / measuring channels I1–I4 CNT1 / CNT2 TRIG DC / AUX / Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Lsdpfxszyl Sij Ancjag Research and development Dimensions: Dimensions: 442 x 435 x 222 mm Weight: 15.8 kg Condition: Used Device can be switched on. Optical condition as shown in the pictures. Scope of supply: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x built-in TRION3-1810M-PA power module Measurement, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, scope of supply as shown in the pictures Shipping via UPS freight possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2019, operating hours: 100 h, functionality: fully functional, type of input current: AC, input voltage: 220 V, input frequency: 50 Hz, TESA TESATRONIC TT20 Measuring System with GT-31 Probe The item for sale is a used TESA TESATRONIC TT20 electronic measuring system supplied with a TESA GT-31 lever-type inductive probe. The TT20 is designed for use with one or two TESA inductive probes. It supports individual measurements as well as sum and difference measurements, making it suitable for dimensional inspection, production control, workshop applications and metrology laboratories. PRODUCT IDENTIFICATION • Manufacturer: TESA Technology / TESA SA • Model: TESATRONIC TT20 • Display unit order number / Type No.: 04430009 • Probe model: TESA GT-31 Gage Head, 10P • Probe part number: 32.10802 • Country of manufacture: Switzerland • Applicable standard: DIN 32876, Part 1 • Number of probe inputs: 2 – channels A and B TT20 TECHNICAL SPECIFICATIONS • Number of measuring ranges: 7 • Minimum selectable measuring range: ±5 µm • Maximum selectable measuring range: ±5000 µm • Display resolution: 0.1 µm • Measurement modes: channel A, channel B, sum and difference • Units: metric and inch • Range selection: manual or automatic according to the measured value • Response time of the analogue, digital and LED classification displays: ≤80 ms • Digital display holding time: 80 ms DISPLAY • Combined digital and pseudo-analogue LCD indication • LCD dimensions: 126 × 62 mm • Numerical display: 6 digits plus “+” or “–” sign • Digit dimensions: 12.5 × 6.6 mm • Pseudo-analogue scale length: 110 mm • Number of analogue scale divisions: 50 • Selectable pointer or bar-graph indication FUNCTIONS • Two probe inputs for single, sum and difference measurements • Manual or automatic measuring-range selection • Direct conversion between metric and inch units • Separate controls for each measuring channel • Programmable tolerance limits • Three-class value classification • Coloured LED tolerance indication with signal outputs • HOLD function for step-by-step measurement routines • Automatic recognition of compatible TESA probes manufactured from 1997 onwards • Bidirectional, opto-isolated RS-232 output • D-Sub In/Out connector • Power supply through an external mains adapter CATALOGUE DISPLAY VALUE LIMITS The following catalogue values apply at a temperature of 20°C and relative humidity of no more than 50%: • Analogue display: 2% • Digital display: 0.3% • Digital output: 0.3% These values refer to the TT20 display unit specification. They are not a current calibration result or a guaranteed accuracy value for this particular used set. Lajdpfxswq Dp De Ancog DIMENSIONS AND CONSTRUCTION • Dimensions: 255 × 235 × 120 mm • Dimensions are specified as width × depth × height • Housing material: resistant plastic • Installation: benchtop workshop or laboratory use CONDITION Used equipment with visible signs of normal use and storage. The unit powers on, and the display and indicator lights operate as shown in the photographs. The display currently shows a selected measuring range of ±2000 µm. This is one of the available ranges and not the maximum capability of the TT20. The unit has not been subjected to a complete laboratory performance test. No current calibration or verification certificate is included. PACKAGE CONTENTS • TESA TESATRONIC TT20 display unit, Type No. 04430009 • TESA GT-31 lever-type probe, part number 32.10802, marked 10P • Connected cables shown in the photographs

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Speed Range - Number of speed ranges: 2 x 3 steps Ljdpfex Hdq Tjx Ancsag - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: like new (used), The NI IC-3171 is a compact, fanless industrial controller designed for use in machine vision systems, industrial automation, quality control, and measurement applications. The device is equipped with an Intel Celeron processor, 4 GB of RAM, and a 32 GB SSD, ensuring stable and reliable operation in industrial environments and research and development laboratories. Other National Instruments devices and accessories are also available: PXIe-1085 – PXI Express chassis, sbRIO-9651 – embedded Single-Board RIO controller, NI IC-3120 – industrial vision controller, NI PCIe-8233 – 4-Port GigE Vision PoE frame grabber card, NI 8234 Dual Gigabit Ethernet Controller for Windows – dual-port Gigabit Ethernet controller, NI PXIe-8238 – dual-port 10 Gigabit Ethernet module for the PXI Express platform, NI PXI-6224 M Series DAQ – M Series data acquisition (DAQ) card, NI Vision Builder AI Development Kit – software license, NI Vision Development Module Run-Time (778044-35) – runtime environment license, NI PCIe-6509 – 96-channel 5 V digital input/output (DIO) card with NI-DAQmx support, Industrial Controller and CVS I/O Accessory with a 3 m long, 44-pin male-to-female HDSub cable, Lajdpfozkazaox Anceg Panel Mount Accessory for IC-317X Industrial Controllers – panel mount kit for the IC-317X controller series. The controller runs on Windows Embedded Standard 7 (WES7) and is designed for integration with industrial cameras, data acquisition systems, and applications requiring continuous operation. Thanks to its fanless design, the device offers high resistance to dust, dirt, and mechanical failures associated with traditional cooling systems. Specifications Manufacturer: National Instruments (NI) Model: IC-3171 Type: industrial controller Processor: Intel Celeron RAM: 4 GB SSD: 32 GB Operating System: Windows Embedded Standard 7 (WES7) Design: Fanless Operating Temperature Range: 0°C to 55°C Application: machine vision, industrial automation, metrology, test & measurement Applications Machine vision systems, Quality control and production inspection, Industrial automation, Data acquisition and analysis, Industrial camera integration, Measurement stations, Research and development laboratories, Industrial applications operating in continuous mode. Key Features Compact industrial design, Fanless operation for increased device reliability, Support for machine vision systems and measurement applications, Ability to integrate with industrial devices and control systems, Stable operation in demanding industrial environments, Solution used in quality control systems and industrial automation. The device comes from equipment used in research and development activities related to machine vision systems, metrology, and industrial automation. The technical and visual condition corresponds to the product photos. The product is covered by a short-term warranty.

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, Lodozv Idtjpfx Ancjag National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: like new (used), machine/vehicle number: 00399, LT Industries – Quantum 1200 Plus, model 20 channel multiplexer • Real-Time Multi-Constituent Process Analyzers • Multipoint, Fiber Optic Multiplexing Capability • Shock and Vibration Free The LT Industries Quantum 1200 Process Analyzer Series is comprised of the rugged, rapid scanning Quantum 2000 and 1200 Systems which were developed for both Pilot Plant and dedicated stand-alone installations in closed-loop-control of manufacturing processes. Using rugged, proven technology, LT Industries' systems enhance quality control, increase yield and reduce waste by providing real-time analysis. The sampling process is non-destructive and non-extractive, involving none of the sample preparation required by other testing technologies. LT Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. These systems deliver the real-time data output that has made LT Industries a recognized NIR leader in process measurement for control. Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for LT Industries. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder. T Industries' Quantum 1200 Process Analyzers provide continuous multiple analyses in real-time. These analyses have proven to be as accurate as traditional lab testing for liquids, powders, solids, slurries, pastes, emulsions and/or suspensions. Our systems deliver the real-time data out-put that has made LT Industries a recognized NIR leader in process measurement for control. The Quantum 1200 Process Analyzer Series combines analytical power and intelligence with ease of use in an integrated systems package. A pre-dispersed, monochromatic beam of light travels through the patented harmonic drive grating mechanism, where is it separated into discrete wavelengths and sent through a fibre optic link to illuminate the sample. The light transmitted back through the fibre optic link is converted into an electrical signal, which is compared by the microprocessor to the calibrated responses in memory. The data output results of this comparison are then used for process control Laodpsg Tdwvefx Ancsg Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2019, ## Universal Robots UR5 with CB3.1 Controller The CB3.1 (Control Box 3.1) is a robust and widely utilized control platform known for its stability and user-friendly interface. Paired with a 2019–2020 UR5 arm, this configuration offers a highly reliable automation solution that balances modern safety standards with simplified industrial integration. ### Hardware Overview * Teaching Pendant: 12-inch wide-screen resistive touch pendant with a user-friendly GUI (PolyScope). * Digital I/O: 16 Digital Inputs and 16 Digital Outputs. * Analog I/O: 2 Analog Inputs and 2 Analog Outputs. * Communication: Modbus TCP, PROFINET, Ethernet/IP, and TCP/IP. * Power Source: 100-240 VAC, 50-60 Hz. --- ### Key Technical Benefits * Enhanced Safety Logic: The 3.1 revision features improved safety-rated I/O and dual-channel safety circuitry, allowing for Category 3, PLd safety configurations without complex external hardware. * Proven Stability: As the final and most refined iteration of the CB3 series, the 3.1 controller is optimized for high uptime and is compatible with a massive library of legacy UR+ grippers and sensors. * Programming Versatility: Supports both Graphical Programming (Polyscope) for beginners and URScript for advanced users who require complex logic and external peripheral control. * Small Footprint: The compact cabinet design allows it to be tucked under workstations or mounted in tight spaces, mirroring the agility of the UR5 arm itself. --- ### Connectivity & Expansion The CB3.1 controller acts as the central hub for your entire work cell: Lodpfx Asyy Itfsncjag * Tool I/O: Provides 12V/24V power and I/O directly at the tool flange, minimizing the need for external cables along the arm. * Remote Control: Can be easily integrated into a Master PLC system via standard industrial Ethernet protocols. * Quick Setup: Features a "Teach" button on the back of the pendant for easy manual guidance of the robot arm. --- ### Technical Summary Table | Feature | Specification | | :--- | :--- | | Safety Functions | 15 Configurable Safety Functions | | I/O Ports | 16 DI, 16 DO, 2 AI, 2 AO | | IP Rating | IP20 (Controller) / IP54 (Robot Arm) | | Ambient Temp | 0°C to 50°C | | Software | PolyScope (CB3 Edition) |

Condition: used, mileage: 105,000 km, power: 110 kW (149.56 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 7,000 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Buy online. Finance digitally. Get it delivered nationwide. Lajdpfeziudgox Ancog Chat with us on WhatsApp now: Get in touch quickly and easily with our sales consultant. ---- Internal ID number: [3439] Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options even without a down payment * Trade-in of your vehicle, old or new Optional extras: * 12–60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery ---- Summer offer: Upon request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent). ---- Vehicle highlights: 19% VAT shown separately German vehicle Accident-free 1st owner Regularly maintained Immediately ready for use Euro 6 standard Maxi High + Long Automatic climate control MBUX multimedia system Navigation system Rearview camera Comfort driver's seat Bluetooth multimedia function Load compartment shelving Special equipment: Acoustic package, passenger-optimized center console (without storage compartment in the center console on the right), DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, entry handle on the rear pillar on the right, vehicle without lowering, rear door (opening angle 270 degrees), wooden floor in the cargo area, LED cargo area light, cable channel on the rear portal, cable channel on the side wall, MBUX multimedia system (7" touchscreen), navigation system for MBUX multimedia system, parking package with rearview camera, smoker's package, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, step on the rear door, USB connection in the center under the dashboard (charging function only), lining in the cargo/FG area: plastic high (up to the roof), reinforced front axle, preparation for cargo compartment bulkhead Additional equipment: 3rd brake light, storage compartment above the front windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag on the driver's side, anti-slip control (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature indicator, brake assistant, automatic activation of driving lights, entry handle for sliding door on the cargo compartment bulkhead, electronic brake force distribution (EBV), driving assistance system: breakdown management, driving assistance system: crosswind assistant, suspension: stabilization level I, noise reduction measure outside, body/superstructure: high-roof standard van, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel (adjustable steering column), headlight range control, truck registration, marker lights on the side, Mercedes-Benz emergency call system, engine 2.0 liters - 110 kW CDI CAT, wheelbase 4325 mm, low emissions according to emission standard Euro 6d, sliding door cargo/passenger compartment right, seat belt system with warning system (passenger side), seat belt system with warning system (driver side), seat cover / upholstery: fabric, start/stop system engine, fleece battery 92 Ah, service interval indicator Assyst, heat-protective glazing, permissible gross weight 3.50 t ---- Do you want to lease or finance? We offer attractive offers – even without a down payment! Please contact us. Contact: Mobile: Telephone: E-mail: Location: Nutzfahrzeug