Cable granulation plant buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Complete installation, incl.:- Pre-Shredder WS 30, 45 kW- Belt-conveyor incl. overband- Dosing-bunker- Granulating plant REDOMA Thuunderhawk 50 kW- Dedusting 93tcccfbu more
5
Feed material: electric cable without interfering substances Ekc3ryp Capacity: up to 180 kg / h Power consumption: 8.5 kW Dimensions: (L x W x H) 1700 x 1300 x 2200 mm Weight: approx. 1200 kg more
2
MzgkfCostruction year: 2004. This plant has about 3600 hours of operation. It is very well maintained, with spare parts and ready to use. Productivity: 300-400 kg/h. more
4
MG 220 T Cable Separations plant with Turbo hammer mill Optional: -Conveyor belt new -Pre Shredder RMR 170/400_12 KW Drive Wbeuay8kk -electrisches System to stop the Conveyor belt -Permanent Magnet with steel Construction different machines Comes new short delivery time more
4
The IRS C180 Combi-line is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. It is equipped with a turbine mill for the processing of fine wire cables and has a cooling unit. This machine with the year 2012 was little used and has only about 900 hours. The plant also with pre shredder, conveyor belt with magnetic drum and cooling unit can be upgraded upon request. ... more
3
Capacity: up to 250 kg / h (INPUT) Power consumption of the system: 24 kW Lmdj27hx Dimensions: (L x W x H) 2,840 x 1,600 x 2,430 mm Weight: CA. 2.100 kg Including cooling system. System components: 1) granulator for pre-cutting (2) turbine mill for fine crushing and processing recorded (3) pneumatic transport system (4) separator for separating material (5) cooling unit Through the use of a fast-rotating turbine mill allows the processing of cables of all kinds. The turbine mill... more
3
Granulator and Seperation Line RMH 6 D with Conveyer Belt, permanent Magneticsystem and pre Shredder WS 15 Details: RMH 6 D Granulator and Seperation Cutting Mill: V Cutting Geometrie Drive: 30 KW Dimensions LxBxH [mm]: 2500 x 1500 x 2800 Drive complete; 38,6 KW Weight: 3200 kg Wagner WS 15 Pre Shredder Drive: 15 KW Working room: 675 x 600 mm Rotor lenght: 675 mm Blades: 44 Stueck Rotordiametre: 308 mm B3ujn Hopper: 1.400 x 1300 mm Dimension: 2040 x 1850 x 1825 mm Weight: ca. 1.400 kg With... more
5
- Very compact plant for small amounts of old cables. - All necessary components including Verkugelung of Litzenkupfer "on board". - Automatic control of the charge by the feeding conveyor belt for continuous operation. - Absorbers for ölhlatige cable Smltssw more
5
The compact 120 is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. Hxrhreyfi This machine with the year 2012 is perfect for low-cost entry into the cable recycling. On request, the plant, thanks to electronic provision, even with pre Shredder can, feed conveyor, stronger drive (for better performance), screening machine for wire screening and/or cooling unit too... more
3
C 180 is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. It is easy after the C 120 up to approximately 180 kg (material) the next plant for hours services. This machine with the year 2012 is perfect for low-cost entry into the cable recycling. On request, the plant, thanks to electronic provision can, retrofitted with pre shredder, feed conveyor, stronger Antire... more


cable gran...
every day

New machines via email!

Be informed!
6
The Sincro 315 Guidetti is a small recycling plant for the recovery of copper from old and residual cables. The machine impresses with its small footprint, simple operation and low energy consumption. The integrated filter system with rotary valve reduces the frequent emptying of anthers and the low height makes the material ball in. This system with the built in 2010 and has only about 500 hours of operation. It is very well maintained, there was little use and is in near mint condition. Belong... more
5
The Compact 180 is a powerful recycling facility for the recovery of copper from old and residual cables. The machine impresses with its small footprint, easy operation and low energy consumption. After the C 120 Easy it is the nearest facility for hourly capacities of up to 180 kg (depending on material). This machine with the Year 2012, is perfect for cost-effective entry into the cable recycling. If desired, the system, thanks to electronic pre-installation, with Vorzerkleiner, feed conveyor,... more
6
The IRS C180 Combi-line is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. It is equipped with a turbine mill for the processing of fine wire cables and has a cooling unit. This machine with the year 2012 has a single shaft before Shredder M2260 and a transport belt with magnetic drum. Technical data: Pelletizing plant 24.0 kW Weight CA. 2.100 kg Dimensi... more
5
Ground cable for protective gas unit, electrode device br / br / length 2-3 m br / br -Dinse plug / cable -several available br / prize piece br / Upnjmmk8w more
1
work piece width:1000 mm Xleulmwic workpiece height:400 mm bore diameter:8 - 40 mm total power requirement:40 kW weight of the machine ca.:9 t dimensions of the machine ca.:3,3 x 6, x 2 m mitre joint cuts -/+ degrees:-45 / +45 width of circular saw-blades:1000 mm PEDDINGHAUS LC 1000 - TDK 1000/9 RETROFIT and new CNC control in 2003 · air coolant of the blade · saw blade diameter: ø 1.000 mm · mitre cut: ± 45 ° · max. beam flange height: 310 mm · inner cooling for spindles · max. drill diamet... more
5
Bagging equipment -4 filling bags -Filter surface approx. 35 m ² -Fan SPK 250 / 5,5 kW / 5500 m³ / connection-DM. 250 mm Bl988seu more
6
thickness: 0,6 mm width: 1200 mm Length: 100 mm 2 pcs Sandwich Panel Production Plant production of sandwich panel production speed [...] Ms3d9w production plant consists of: unwinding device feed system lamination cutting device glueing fume extractor device stacking device electronic control system more
5
Ground cable for protective gas unit, electrode device br / br / length 2-3 m br / br -Dinse plug / cable -several available br / prize piece br / Upnizj9wu more
5
work piece width:1000 mm workpiece height:300 mm bore diameter:40 mm total power requirement:51 kW 93g8bhia8 workpiece length:18000 mm more
3
pressing range 10 to 95 mm? operating pressure 700 bar Yxcrlg3nq connection 220 V hydraulic aggregate HAWE more
6
Crawler + 20 t + Deutz F4L912 (100 HP) diesel + generator + remote control + feed hopper + graded 2-deck screen 1.4 x 2.8 m + 3 fold-out Hadenbaender + ejector height 3.6 or 3 m + hopper dismantled for the direct feeding of the crusher + transport dimensions: length 11.5 m x width 2.7 m x height 3.3 m Bah7qrcmz0 more
6
VACUUM/LOW-PRESSURE IMPREGNATION PLANT IWT Moldrup Type V10-S DIAMETER 1.400 mm AND LENGTH 4.100 mm Not used, installation in 2014 Pressure vessel: Diameter 1.400 mm Length 4.100 mm Volume: 24.000 litres of preservative Wood volume: app. 3,2 m3 per charge Pressure: 0 to 3 bar (abs) Material: 10 mm HII boiler plate/P265GH Wood pack size: max 1,00 m x 0,80 m x 4,20 m Door: 1 rapid closure door Complete with internal rails and an anti-float system for the trolleys Storage tank placed next to t... more
6
cutting range: 1200 x 500 mm round material: bei 90°= 530 mm flat material: bei 90°=1200x500 mm round material: bei 45° re/li = 530 mm flat material: bei 45° re/li =700x500 mm cutting speed: 17-110 m/min mitter cutting - both sides: 45 ° dimensions of saw-band: 8800 x 54 x 1,6 mm bore diameter: 35 mm spindle taper: SA 40 spindle stroke: vertical 0-350 mm spindle revolutions per minute : 200-800 U/min number of spindles: 3 Stück S8znkmbwb control: 7-achsig numerisch feed min/max: max. 300 mm/mi... more
5
Waste water purification plant, drilling water purification, Späneabscheider, paper filter, paper band filter tank 1000/700/H800 mm agitator 0.75 kw-speed 1500 rev / min with fleece band filter dimensions 1100/710/H1650 mm Weight 130 kg 2pdavm more
5
work piece width:1000 mm workpiece height:420 mm bore diameter:8 - 40 mm weight of the machine ca.:18 t Bafx83voao dimensions of the machine ca.:B x L x H 6,2 x 6,5 x 2,9 m The sawdrill line consists of a drilling system from Peddinghaus - BDL 1000/9 - and a band saw from Meba - 1020 DGP. It is used but in good condition. The band saw is from the year 2005, the drill line from 2007. Technical data Peddinghaus drilling rig BDL 1000/9 The maximum working width is 1000 mm, the maximum working h... more
2
fibre glass stick 9 mm length 100 m Buzpjo2s8 with bulb unit for shackle diameter of reel 1,000 mm weight approx. 30 kg more
6
E drive + task band with frequency converter and load-dependent control + mutton mill (electric motor 22 kW) with Strainer basket (currently holes 22 mm / more available) + 2 deck screen machine (currently 04 + 4/10 + 10/22) + 3 discharge conveyors m. magnetic separator + AVS - diesel power generators () IVECO / 2,832 hours) + hook lift frame Bahvqhpgo8 more
6
Automatic heating plant HOBAG / NOLTING / RSN incl. briquetting press Used, in good condition can be visited in operation Cqprhjtac Consists of - automatic log heating system HOBAG incl. crushing plant and pressing unit for each wood type - boiler NOLTING AHK 135 117 kW -briquetting Press RSN SP 70/20 7 kW more
5
candle diameter: 21 mm candle length: 300 mm capacity: 1872 Stück/h Wsl9jsfyl heating-up temprerature: 70-120 °C cycle time: 13 sec candle material: Paraffin/Stearin control: Siemens S 5 space requirement of the machine approx.: ca.L:24 xB: 2 xH: 5,2 m PLANT FOR CANDLE PRODUCTION. The unit is applied for the production of parafin /stearin candles ,after casting process with a high automation [...] colour candles can be manufactured and equipped with different molding boxes ([...] cylindrical b... more
5
Ground cable for protective gas unit, electrode device br / br / length 2-3 m br / br -Dinse plug / cable -several available br / prize piece br / Upnjc2fkv more
5
work piece width:1000 mm workpiece height:450 mm Gcw2lfn drill diameter:10 - 40 mm The saw drilling line consists of the drilling rig APS 1015 and the saw KBS 1001 DGNC. The dimension of the material (section steel) are a maximum of 1000 x 450 mm and at least 65 x 65 mm. There are 3 drill axes, one vertical and 2 horizontal. The drill diameter is at least 10 mm and a maximum of 40 mm at a feed rate of 20 - 200 mm / min. There are 5 tool changer positions per axis with an ISO 40 tool holder. Th... more
6
CNC punching machine with a punching capacity from 1000 kN. Travel 1200 x 600 mm. using the control be dropped five different stamping or embossing tools. In addition, a drill and a deburring unit is fitted, which also has the control to use. Holes can be produced from 10 to 40 mm and thread m 12 m 24. With the deburring unit punching can be edited up to 30 mm and holes up to 40 mm. The speed of the positioning can be adjusted variably. Fpc8d9 more
6
E drive + task band with frequency converter and load-dependent control + mutton mill (electric motor 22 kW) with Strainer basket (currently holes 22 mm / more available) + 2 deck screen machine (currently 04 + 4/10 + 10/22) + 3 discharge conveyors m. magnetic separator + AVS - diesel power generators () IVECO / 2,832 hours) + hook lift frame 2qylgy more
6
Sourdough plant Ismar 400   Manufacturer: Ismar Type: R2S 400 Stainless steel 2 x 400 litre 400 volts 50 Hz 0, 55kW On roll External dimensions: B: 80cm t: 100cm H: 160cm Bac80qpxzl See detail BB´s image article no.: BT07111701 No.: We have a large assortment of bakery machines more
5
rated capacity: 250 kVA drive motor: 220 kW Lqzpr control: RGN 04-4 Number of working hours: keine Angaben h total power requirement: ca. 230 kW weight of the machine ca.: 1,5 t space requirements of the machine approx.: L:6,04xB:2,4xH:2,6 m CHP - combined heat and power plant consists of: - stand by aggregate Scania (with Scania diesel motor defect), VHP according ISO container construction type, transportable and noise reduced with thermal heat use such as cogeneration, delivery contract acco... more
5
Ground cable for protective gas unit, electrode device br / br / length 2-3 m br / br -Dinse plug / cable -several available br / prize piece br / Upnipy0ct more
5
work piece width:300 mm workpiece height: mm bore diameter:8 - 27 mm Qf2v3yxv total power requirement:25 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,3 x 2,5 x 1,4 m workpiece weight:max. 3 t Peddinghaus CNC controlled beam saw drill line DSC300 D with disc saw for 90° cut, saw blade size 630 mm, incl. signomat, roller feed measuring system, 3 drill spindles for HHS inner coolant drills Ø =8-27 mm, incl. infeed and outfeed roller conveyor. This small saw drill line is espec... more
1
work piece width unbk. mm workpiece height unbk. mm U2ikbilkp bore diameter mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1
work piece width: mm workpiece height: mm bore diameter: mm Udgsw3v9w total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none more
6
Sourdough unit of Isernhaeger 450   Manufacturer: Isernhaeger Type: 450 LTR Stainless steel 450 litres 380/220 volt 50 Hz On roll External dimensions: B: 90cm t: 110cm h: 190cm See detail BB´s image article no.: BT051017191 No.: We have a large assortment of bakery machines Cp2lm0t8 more
4
"cable-dog"Make: Jacob Thaler KGType: 40NKHE201GSSYear of manufacture: 1998 Bl39jle0 more
2
Connection cable, connecting cable Type SIM-M8-3GD-2 ,5-PU number 159420-23x Available Price per Package Weight 0.2 kg His7b9cai more
5
work piece width:max. 1100 mm workpiece height:mind. 19 mm bore diameter:max. 40 mm total power requirement:mind. 25 kW weight of the machine ca.:mind. 15 t 77rzkvzuz bore spindle turning speed range:200 - 800 U/min workpiece height max.:460 mm workpiece weight max.:8 t cutting speed:bis 150 m/min down speed stepless:0-300 mm/min. work height max.:630 mm The Peddinghaus Cooperation beam saw drill combination consists of a Peddinghaus PCD1100 beam drill line and a Meba 1100 DG mitre band saw. ... more
4
maximum traction force 400kp Vrhto3 cable thickness 8 mm electrical data 380V / 3KW space requirements length - 1,100 x width - 700 x height - 800 mm weight approx. 200 kg more
work piece width: mm 0kzwenz9 workpiece height: mm bore diameter: mm saw blade diameter:450 mm 100 % before loading warranty: none more
1
Angle of drilling plant used (blue) Floor area approx. 1500 mm x 500 mm Height approx. 1250 mm, width 1500 mm with holes and thread M20 in the hole distance of 80 mm W2qqgwnv7 t = 50 mm Clamping device for machine tools more
3
thickness: - mm width: - mm Length: - mm complete plant: siehe LINK 7nkv0dhk8 control: SPS Plant is to drying of fermentation residue, sewage sludge, slaughtered waste etc. plant is unused contact: Mr. Sven Kies / phone: 0049 341 5204616, email: kies(at)[...] more
5
Window processing line, CNC Window production line, double end, Fabr Gubisch, type DST-H Bj. 1994 Ser.-Nr. 7593-2x 2 tool towers a 5 Heads-built tools from Leitz-shaft mount 50-max tool 350 mm-max tool height 650 mm 4x milling motors 11 kW 2800 rpm / min control, Fabr Gubisch roller conveyor, L / W 4000 x 200 mm milling machine, Fabr Gubisch, type FN2000-Bj. 1994 Ser.-Nr. 7490 -4 auger shafts-4x milling motors 9.2 kW 2800 rpm / min tools from Leitz-shaft receiving about 40-max tool 230 mm-max to... more


cable gran...
every day

New machines via email!

Be informed!

to

to

Change search
CABLE GRANULATION PLANT
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close