Used Polyester Granules for sale (883)

Condition: used, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. Dusdpjygvmlsfx Afnsn

Condition: used, Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which measures approximately 600mm diameter x 800mm wide. Includes (2) stator knives and (2) block knives for wedge. Unit is driven by 75kw, 400volt, 50hz, 1480rpm motor. Unit has 10mm bottom screen fitted. Unit has hydraulic powerpack driven by 1.5kw, 400volt, 50hz, 1400rpm motor. Includes double bag off system with 7.5kw blower, spare knives and (1) spare screen. Unit includes control panel. Dsdpfxjygvl Ij Afnjun

Condition: used, Comprehensively tested, used TK Fielder model PMA25 stainless steel mixer granulator with associated parts. Dusdjygvk Ropfx Afnjn Manufacturer: TKFielder Material: Stainless steel TYpe of Blades: Mixing blade driven by a 3/50 electric motor Click on the link below to see a video of the machine running.

Condition: good (used), Year of construction: 2006, VERY POWERFUL GRANULATOR WITH HIGH CAPACITY Technical data: Rotor Length 4 000 mm Rotor Diameter 1 200 mm Power 500 kW Weight approx. 35 tons Dsdpfx Afoyg E Hzsneun The machine is dismantled on stock.

Condition: excellent (used), Granulator Frewitt MGV 003 Ex-protected version Material stainless steel Power 5 kW Dujdpfsq H Rztox Afnen stepless mechanical variator mobile, movable on castors Very good condition, straight from production!!!

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Dujdpfx Afom Sg Hcsnsn

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Duodpfxjucw S Se Afnsn

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Dsdjwk Nk Topfx Afnoun

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Dodoydp Abjpfx Afneun

Condition: ready for operation (used), There are two granulators available, output WPC: 2t/h, hole diameter: 5.3mm, hole layout: 2x16/ 2x19/ 2x22/ 2x25/ 2x28, length: 1100mm, width: 700mm, height: 800mm, with control cabinet, machines were barely used. Dusdsd A Nnaspfx Afnjn

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Dsdpfsn Tpmujx Afnsun

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Dodpen Tpmxsfx Afnsun

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Dedpfexgrdfjx Afnjun Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Duedpfx Ajxgthljfnon Drive motor 75 kw

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Dodpoxb Aggofx Afnjun Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Rotor diameter: 500 mm Dodpfx Ajxgrd Ejfneun Rotor width: 600 mm Inlet opening: 500 x 600 mm 5 knives, diagonal cut Hinged housing, with 2 stator knives.

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Drive 90 kW With equipment Dujdpfx Afoxgrn Ronon

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Rotor diameter 450 mm Rotor width 600 mm Djdexgrx Njpfx Afnoun 3 rotor knives (diagonal cut), 2 stator knives Drive motor 22 kw

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Dujdpjxgtl Rsfx Afnon Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Duodpfxexgtr De Afnen Rotor knives: 4

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Dujdpsx H Nxiofx Afnon Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Duedpfxoxgtfwe Afnen Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Dusdpfxox Iff Ie Afnen Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Dsdpfx Afjx Ifglensun With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Condux Granulator type CS 300/600-4 WK Dujdpfxoxgrfio Afnjn Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)