5
Rotating sieve , Make AZO Adolf Zimmerman, Type SO, No. 4053, Material Mild steel, Sieve sizes dia.180mm, Screw sizes +/-dia.160mm, Inlet dia.200mm (funnel 480x480mm), Outlet dia.200mm, With inspection hatch , Motor 0.75 KW, 220/380 volt, With sieve cage , Sieve perforation dia.2mm, Mounted on wheels , With switch , Floor space 1.3X1.2 M, Total height 2.1 M, Weight 200 KG, Extra information screw +/-dia.160mm What you can expect from Foeth: all our machines are in working condition, and at a red...
15
Description: Reverse osmosis/electrodeionization system
serial no.:060102
Control: ROE3, PSM 30010D, Siemens Logo
Permeate capacity: 2000l/h at 15°C
With antiscalant dosing by diaphragm dosing pump (Prominent with suction set)
Type: WATROP2000
Manufacturer: WAT
Year of manufacture: unknown
Documentation: yes
Storage location: Warehouse Warburg
Status: used - good
Pressure: 3-6 bar (water inlet pressure)
Temperature: 5-35 °C (water temperature)
Material: (piping in stainless steel / PVC)...
10
FREWITT
Model MG 636
Serial Number 05916287
Bropulr9cn
Electric 380V / 50Hz / 2.15A
Rotor dimensions (mm) 450 mm
1
5
Reverse osmosis with dosing system, tank and lifting pump
Ultra-compact, modular design with integrated connection technology for low dead volume fluid management and full-fit concept to prevent bacterial contamination Vertically mounted pressure tubes for easy membrane replacement. Thin-film composite membranes for high permeate performance, permeate yield and optimum salt retention rate. Stainless steel submersible pump for optimum heat dissipation, long service life and particularly quiet op...
5
Vibro sieve , Make Superior B.V. Vibratory Equipment, Year of construction unknown, Material Stainless steel, Sieve sizes 1000x500mm, With cover , Inlet dia. 245mm (1x) dia. 90mm (1x), Outlet dia. 145mm (1x) dia. 95mm (2x), Drive vibro motor , Motor (2x) 0,4 kW, 380 Volt, Sieve perforation 4x45mm, 1x45mm , Mounted on frame , With switch , Floor space 1,8x1,0 M, Total height 1,9 M, Weight 430 Kg, Extra Specifications half of the top screen deck is missing. What you can expect from Foeth: all our ...
15
Description: 2-stage reverse osmosis system completely piped in stainless steel. All pressure pipes and inline pumps are equipped with quick disconnect couplings, so that a quick change of the individual components can be made at any time. Ideal as a test plant.
Manufacturer: Setec
Year of construction: 1999
documentation:
Storage location: Warehouse Warburg
Status: used - good
Read off operating hours: 968 h
capacity: road 1 / road 2
-: 1.37 / 1.30 m³/h (feed water)
-: 1.30 / 1.00 m³/h...
5
Turbo mill , Make Gebr. Bauermeister & Co., Type UT 42, No. 740266, Year of construction 1987, Material Mild steel, Rotor size dia.780x200mm, With sieve cage Mesh dia. 1 mm, Inlet 290x180mm, Motor 55 KW, 400/690 Volt , Speed 2900rpm, Floorspace +/- 2,5x1,2 M, Total height 1,5 M, Weight 1300 Kg, Extra Specifications ++ RECONDITIONED ++ What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination w...
15
Type: Ultrapo BPS 7-3000 L/HR
Manufacturer: Nalco
Year of construction: 2010
Documentation: no
Viewing: yes
Storage location: Warehouse Warburg
Status: used / used / second hand
capacity: 3 m³/h (permeate)
Capacity: m³/h (concentrate)
Pressure: 2.5 bar (inlet pressure)
7apocyl
-: (1 X pressure pipe with 40 inch module)
-: (1 X pressure pipe with two 40 inch modules)
Control: Nalco OS 3051
-: Pressure pump Lowara SV809N40T/P
Delivery rate: 14 m³/h
Pressure: 6 bar
Power: 4 kW
Leng...
5
Rotating sieve , Make POWTEK LTD, Type P300X450 NIBBLER, No. p9211, Material Stainless steel, Sieve sizes dia.300mm x470mm, Screw sizes dia.280mm, Inlet funnel 600x600mm, Outlet 450x400mm, Motor 4.0 KW, 380 Volt, Speed +/- 84 rpm, With sieve cage , Sieve perforation 8mm, Floor space 2,0x0,7 M, Total height 1,0 M, Weight 430 KG, Extra information screw dia.280mm What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for sh...
12
Description: Former application for further concentration of concentrates of an upstream reverse osmosis stage in the leachate area of a green waste landfill.
Type: 9532 DT
Manufacturer: ROCHEM
Year of construction: 1995
documentation:
Inspection: yes
Storage location: Warburg warehouse
Status: used - satisfactory
-: 10 X DT modules
filter area: 76.5 m² (membrane area)
pressure: 120 bar (max. operating pressure)
Temperature: 5-35 °C
Material: stainless steel (stainless steel - frame ...
5
Granulating sieve , Make ALEXANDERWERK, Type P 300, No. 8906, Material Stainless steel, Grater , Rotor sizes dia.290mm, Sieve sizes dia.300mm x140mm, Sieve perforation (3x) 3mm, With hopper dia.100mm, Inlet dia.250 mm, Outlet dia.340mm, Motor 3,6 KW, 220-380 Volt (Ex), Speed 240 RPM, Mounted on stainl. st. frame , Mounted on wheels , With switchgear , Floor space 1,8x1,0 M, Total height 1,5 M, Weight 400 KG What you can expect from Foeth: all our machines are in working condition, and at a reduc...
13
Description: Description of the plant
- Pre-filter 5µ and pipe separator
- Water softener MC -N 160-2 (2x GFK pressure tank each 48 L. capacity with control and brine tank) is supplied with filtered drinking water.
This is passed over the regenerated softener granulate (cation resin) and treated. The hardness control unit monitors the water hardness.
In case of hardness Limitron switches off the reverse osmosis.
- Reverse osmosis with 3x 4" coiled tubing modules
Permeate capacity 700 litres.
-...
5
Granulating sieve , Make Glatt Process Technology GmbH (DE), Type TR 80, No. 4945, Year of construction 1988, Material Stainless steel, Rotor sizes dia.75mm, Sieve sizes dia.80mm, Sieve perforation raps 0,8 mm, With hopper dia.300mm, Inlet dia.80mm, Outlet dia.100mm, Motor +/- 0,5 KW (ex), With variable speed drive , Speed (675/2890 rpm), Mounted on stainl. st. frame , Floor space 1,2x1,0 M, Total height 1,8 M, Weight 400KG What you can expect from Foeth: all our machines are in working conditio...
15
Description: 1-stage high-pressure reverse osmosis plant for waste water treatment and for recirculation at process baths, e.g. rinsing. Reverse osmosis plant is in need of overhaul. ( 2 pumps and small parts have to be replaced )
Manufacturer: RIK GmbH
Year of construction: 1999
Documentation: no
Status: used - in need of overhaul
Flow rate: 3,6 m³/h (raw water)
Delivery rate: 3 m³/h (permeate)
Delivery rate: 0,6 m³/h (concentrate)
Delivery rate: 13 m³/h (circulation)
Pressure: 60 bar ...
5
Vibro sieve , Make J.Engelsmann AG, Type JEL Fix 50, Material Stainless steel, Sieve surface 0,2 M2, Number of sieve decks: 1x, Sieve sizes 2mm, With cover , Inlet dia.500mm, Outlet tank 300x200mm, Drive vibro motor 0,2 KW, 400 Volt, Mounted on stainl. st. frame , Floor space 0,7x0,7M, Total height 1,6 M, Weight 100 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You ar...
10
Description: Ultrafiltration or reverse osmosis plant (both possible from the pressures (pressure pipes up to 30 bar) without control. The plant is not ready for operation in its current state. A maximum of 12 8"/40" modules can be installed. In the current state only one pressure pipe is connected for operation.
Year of construction: 2001
Documentation: no
Storage location: Warburg warehouse
9jsoh02po
Status: used - in need of overhaul
Accessories: (booster pump KSB CN 30/12 3R)
delivery ...
5
Vibro feeder , Make Scan-Vibro A/S (DEN), Type TRK 600x300x2000, No. 27511, Year of construction 1997, Material Stainless steel 1.4301 (304), Feeder width 600mm, Feeder length 2000, Feeder height 300mm, Closed , Inlet dia.200mm, Outlet dia.200mm, dia.100mm, With vibro motor (2x) 0,5KW, 400 Volt (Ex), Mounted on frame , Floorspace 3,0x1,0 M, Total height 2,5 M, Weight 615 KG, Extra Specifications with sieve 0.315x0.135 t = 0.2, with (3x) inspection hatch, Capacity 100 kg / h (p = 3.5 Kg / dm3) Wh...
15
Description: 1,5 m³/h 65 bar landfill leachate ROCHEM high pressure reverse osmosis / reverse osmosis unit e.g. for the treatment of landfill leachate (max. 65 bar). The original application was the purification of landfill leachate, as pre-treatment for the high pressure reverse osmosis No. 28335.
The plant consists of a leachate stage with integrated permeate stage.
Baufenfjd3
Type: 9142 DT
Manufacturer: Rochem
Year of construction: 1995
documentation:
Inspection: yes
Storage location: W...
5
Vibro sieve "Combi Cleaner", Make Bühler AG (CH), Type MTKB 120/120, No. 10434460, Year of construction 2007, Material Mild steel, Number of sieve decks: 4, Sieve sizes 120x120mm, Inlet dia.180mm, Outlet (2x), Drive vibro motor , Motor (2x) 0,75 KW, 230/400 Volt (Ex II /3D EEx c T=155gr.C.), With ball cleaning , With air cleaning /separation, Mounted on mild steel frame , With switch , Floor space 2,6x2,0 M, Total height 2,3 M, Weight 1570 KG, Extra Specifications capacity +/- 12-24 t/h (wheat) ...
13
Type: -
Manufacturer: ENVIRO-CHEMIE
Year of manufacture: 2009
Documentation: no
Inspection: yes
Storage location: Warburg warehouse
Status: used / second hand
capacity: 3.5 m³/h (permeate - adjusted value)
capacity: 1.1 m³/h (concentrate - adjusted value)
-: (6 X pressure pipe with two 40 inch modules)
-: (Grundfos CRN 32-3-2 5.5 kW booster pump)
-: (Pressure pump Grundfos CRN 15-16 15 kW)
Gwy8s8
-: (Frequency converter Danfos VLT Aqua Drive)
Length: 3700 mm
width: 1370 mm
height:...
5
Vibro sieve "Combi Cleaner", Make Bühler AG (CH), Type MTKB 120/120, No. 10434461, Year of construction 2007, Material Mild steel, Number of sieve decks: 4, Sieve sizes 120x120mm, Inlet dia.180mm, Outlet (2x), Drive vibro motor , Motor (2x) 0,75 KW, 230/400 Volt (Ex II /3D EEx c T=155gr.C.), With ball cleaning , With air cleaning /separation, Mounted on mild steel frame , With switch , Floor space 2,6x2,0, Total height 2,3 M, Weight 1570 KG, Extra Specifications capacity +/- 12-24 t/h (wheat) Wh...
8
Description: The system is designed for drinking water (feed water) with a salt content of 1000 mg/l
Type: 250 combi
Manufacturer: H2O
Year of construction: 2003
documentation:
Viewing: yes
Storage location: Warehouse Warburg
Status: used / used / second hand
capacity: 250 l/h (permeate)
capacity: 83 l/h (83)
E3ls7yqpi
Pressure: 14 bar (pump pressure)
-: Desalination rate 97% min
Pressure: 2 bar (feed water min)
Pressure: 6 bar (feed water)
Temperature: 5/35 °C (min/max)
voltage: ...
5
Vibro sieve , Make GKM Siebtechnik (DE), Type KTS-V2 600/1, No. 1864 EX 113 DC, Year of construction 2012, Material Stainless steel, Sieve surface 0.28 M³, Number of sieve decks: (no sieve), Sieve sizes dia. 600 mm, Inlet dia.300mm, Drive vibro motor , Motor (2x) 0,35 KW, 230/400 Volt (Ex), Mounted on stainl. st. frame , Mounted on wheels , With switch , Floor space 1,3x1,6 M, Total height 1,4 M, Weight 300 KG, Extra Specifications Outlet with butterfly valve and Gericke PTA20 conveyor sender, s...
5
Rotating sieve "grater", Make KEK Kemutec Products limited (UK), No. 69477MOSO6682A, Year of construction 1990, Material Mild steel, Stainless steel, Sieve sizes dia.250mm x600mm, Screw sizes dia.140mm, Inlet dia.160mm, Outlet dia.300, With inspection hatch 400x230mm, Motor 2,2 KW, 220/380 Volt, Air purged glands , Mounted on stainl. st. frame , With switchgear , Floor space 2,0x1,4 M, Total height 1,6 M, Extra Specifications Housing in mildsteel, Extra information Screw sizes: dia. 140 mm What ...
5
Granulating sieve , Make Werner + Pfleiderer (DE), Type 175/120, No. 231457, Year of construction 1994, Material Stainless steel 1.4571 (316Ti), Grater , Sieve sizes dia.130mm x180mm, Sieve perforation dia.2mm, With hopper Dia.500mm, h=300mm, Inlet dia.130mm, Outlet 200x120mm, Motor 1,5 kW, 220/380 Volt (Ex), With extra sieves (4x)dia.5mm, dia.2mm, dia.1mm, Mounted on mild steel frame , Mounted on wheels , With switch , Floor space 0,7x0,6 M, Total height 1,5 M, Weight 160 KG, Extra Specificatio...
5
Rotating sieve , Make Russel Finex, Type A14400, Year of construction "unknown, manufacteringtag is missing", Material Stainless steel, Sieve sizes Durchm.200x700mm, Inlet inclusive rotaryvalve dia +/-200mm, With inspection hatch "cover is missing", Motor , With sieve cage , Floor space 1,6x1,2 M, Total height 1,0 M, Weight 280 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination world...
5
Rotating sieve , Make Russel Finex, Type A14400, No. V559, Year of construction "unkown", Material Stainless steel, Sieve sizes dia.200x700mm, Screw sizes dia.200x210mm, Inlet 250x250mm, Outlet 280x220mm, With inspection hatch , Motor , With sieve cage , Mounted on wheels , With switchgear , Floor space 1,6x1,2 M, Total height 1,9 M, Weight 350 KG, Extra information screw dia.200x210mm What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to n...
1
Vibro sieve (1x), Make Russel, Type 15555, No. L 1019, Material Stainless steel, Sieve surface 0,7 M2, Number of sieve decks: 1, Sieve sizes Dia. 950mm, With cover , Inlet Dia. 230mm, Outlet 200x150mm, Motor , Sieve perforation 0,1 mm, Mounted on wheels , With switch , Floor space 1,4x1,2 M, Total height 1,3 M, Weight 350 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. ...
5
Make Quadro engineering, Type The comil 196FS-USDA, No. 196-0413, Material Stainless steel, Conical granulating sieve , Rotor sizes 280mm, Sieve sizes Dia. 300x180mm, Sieve perforation 1mm, 0,5mm, Inlet Dia. 200mm, Outlet Dia. 350mm, Motor 50kW 380/420 Volt, With extra sieves , With switch , Floor space 1,3x0,7m, Total height 1,6m, Weight 410kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any des...
5
Vibro sieve , Make J. Engelsmann AG (DE), Type KONTI 1000/91, No. 63449, Year of construction 1997, Material Stainless steel, Sieve surface 0.45 M2, Number of sieve decks: 1, Sieve sizes 890x470 mm, With cover , Inlet 195 mm, Outlet 245 mm (product) 95 mm (waste), Drive vibro motor , Motor 0.25 KW 220.260/380.440 Volt, Sieve perforation 2mm, Mounted on mild steel frame , Floor space 1.2x0.95 M, Total height 0.9 M, Weight 200 KG What you can expect from Foeth: all our machines are in working cond...
5
Hammer mill , Make Condux Maschinenbau GmbH, Type CHM 23/20-N5/D, No. 6213, Year of construction 1993, Material Stainless steel, Rotor size dia. 230 x 200mm, Moving hammers , With sieve cage (± 2mm), With hopper , Inlet 600x600mm, Motor 2,2 KW, 220-240/380-420 Volt, Mounted on frame , Mounted on wheels , With switchgear , Floorspace 1,9x1,3 M, Total height 2,5 M, Extra Specifications with dosingscrew diameter ø120 mm , pitch 90mm,, with fan 9 M³/min, with filter (4x +/-dia.130 mm x1100mm) Wh...
5
Granulating sieve , Make Glatt, Type TRG-250, No. 55.089, Year of construction 2002, Material Stainless steel, Rotor sizes Dia. 250 mm, Sieve sizes Dia. 250 x 140 mm, Sieve perforation 12x12 mm, With hopper , Inlet Dia. 265 mm, Outlet Dia. 390 mm, Motor 5,5 kW 230/400 Volt, With variable speed drive , Mounted on stainl. st. frame , Mounted on wheels , With switch , Floor space 1,5x0,8 M, Total height 1,5 M, Weight 320 KG What you can expect from Foeth: all our machines are in working condition, ...
5
Grater , Make "unknown, manufacturingtag is missing", Rotor sizes dia.290mm, Sieve sizes dia.300mm x150mm, Sieve perforation 3mm, Inlet dia.260mm, Outlet dia.250mm, Motor 4,0 KW, 500 Volt, Mounted on stainl. st. frame ", Floor space 1,1x0,7 M, Total height 0,7 M, Weight 300 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barnev...
5
Grater , Make Glatt, Type Unknown manufacturer tag is missing, Material Stainless steel, Rotor sizes Dia. 300, Sieve sizes Dia. 300 x 140 mm, Sieve perforation Dia. 4 mm, With hopper , Inlet Dia. 500 mm, Outlet Dia. 350 mm, Motor 7,5 kW, With variable speed drive , Speed 175-600 Rpm, Mounted on stainl. st. frame , Mounted on wheels , With switch , Floor space 1,4x0,8 M, Total height 1,6 M, Weight 300 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced p...
5
Vibro sieve "Tumbler screening machine", Make Gerald Kainz Verfahrenstechnik GmbH (DE), Type GTS-2000, No. 18/028, Year of construction 2018, Material Mild steel, Sieve surface 2.6 m2, Number of sieve decks: 1, Sieve sizes dia.1880mm, With cover , Inlet dia.300mm, Outlet dia.200mm, Drive excenter , Motor 4,0 KW, 400/690 Volt, Sieve perforation (no sieve), Mounted on mild steel frame , Floor space 2,0x2,0 M, Total height 1,8 M, Weight 1150 KG, Extra Specifications This sieve is unused What you ca...
2
Vibro feeder with internal sieve deck (1x), Make VAV Scan-Vibro A/S, Type TR, No. 32013, Year of construction 2001, Material Stainless steel, Feeder width 410mm, Feeder length 2300mm, Feeder height 200mm, Closed (equipped with cover), Inlet dia. 150mm, Outlet dia. 150mm, With vibro motor 0,5 KW, 230/400 Volt (2x), Mounted on frame , Floorspace 2,6x0,7 M, Total height 1,1 M, Weight 450 KG, Extra Specifications - Capacity approx. 3500 KG/Hr - Sieve deck size 650x400mm, Perforation 9x9mm What you c...
5
Vibro sieve "Tumbler screening machine", Make Gerald Kainz Verfahrenstechnik GmbH (DE), Type GTS-2000, No. 18/027, Year of construction 2018, Material Mild steel, Sieve surface 2.6 m2, Number of sieve decks: 1, Sieve sizes dia.1880mm, With cover , Inlet dia.300mm, Outlet dia.200mm, Drive excenter , Motor 4,0 KW, 400/690 Volt, Sieve perforation (no sieve), Mounted on mild steel frame , Floor space 2,0x2,0 M, Total height 1,8 M, Weight 1150 KG, Extra Specifications This sieve is unused What you ca...
4
Granulating sieve , Make Bertuzzi (IT), Type PAP 0532, No. S 00509, Year of construction 2000, Material Stainless steel, Rotor sizes dia. 180x290mm, Sieve sizes dia. 195x300mm, Sieve perforation dia. 4mm, Inlet dia. 80mm, Outlet dia. 50mm, Motor 1,5 kW 220-240/380-420 volt, With switch , Floor space 1,0x0,6 M, Total height 1,2 M, Weight 220 Kg, CE What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any ...
5
Rotating sieve "Rotating drum sieve", Make Reko Industrial Equipment BV, Type Internally-fed drum screen TI-S 1200/1400, No. TZX0006/0001/S, Year of construction 2008, Material Stainless steel, Sieve sizes dia. 1200x4000mm, Motor 1,5 KW, 230/400 Volt, Sieve perforation 3 and 4mm, Floor space 5,0x1,6 M, Total height 2,5 M, Weight 2000 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination...
5
Rotating sieve "rotating drum sieve", Make Reko Industrial Eqiupment BV, Type Internally-fed drum screen TI-S 1200/4000, No. TZX0006/0002/S, Year of construction 2008, Material Stainless steel, Sieve sizes dia. 1200x4000, Motor 1,5 KW, 230/400 Volt, Sieve perforation 3 and 4mm, Floor space 5,0x1,6 M, Total height 2,5 M, Weight 2000 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination w...
5
Hammer mill "Comminuting mill" (1x), Make Apex Construction Ltd., Type 114 DW-SF, No. A-40880, Year of construction unknown, Material Stainless steel, Rotor size dia. 260x295mm, Fixed hammers , With sieve cage , Inlet /feeding through twin screw metering screw, Motor 22,0/30,0 KW, 380/660 Volt, Mounted on frame , Mounted on wheels , With switch , Floorspace 2,0x1,3 M, Total height 2,4 M, Weight 900 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced pri...
4
Hammer mill (1x), Make Sharples-Stokes / Pennwalt France, Type Tornado Mill 44F, No. 80 01, Year of construction 1980 (in excellent condition), Material Stainless steel, Material finish Mirror polished, Rotor size dia. 250x120mm, Fixed hammers , With sieve cage (± 20x20mm), Inlet dia. 145mm, Motor 4,0 KW, 380 Volt, Speed max. 5200 Rpm, Mounted on frame , Mounted on wheels , With switch , Floorspace 1,2x1,0 M, Total height 1,8 M, Weight 300 KG What you can expect from Foeth: all our machines are ...