Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Drive 18,5 kW screw size 50 mm 2shohpeja screw length 25 L/D material Folien, film sheet-film Capacity 80 kg/h more
5
The Sincro 950 by Guidetti is a powerful yet compact recycling plant for the extraction of copper from old and residual cables. The machine impresses with its low power consumption, easy operation and high performance. These include a single-shaft pre-Shredder Guidetti PMG 900 with a hydraulic pusher and a conveyor belt with magnetic. This makes them ideal for the entry level in the recycling of old cables. This plant is immediately available and in good condition. The plant is suitable in... more
4
The 430 by Guidetti is a compact recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. These include a single-shaft pre-Shredder Guidetti PMG 400 with hydraulic pusher and a conveyor belt with magnetic. This makes them ideal for the entry level in the recycling of old cables. This plant is immediately available and in good condition. The plant is suitable especially for the Mk... more
5
Drive 205 kW screw size 120 mm screw length 30 L/D material Flakes, Agglomerat, Mahlg regrind Capacity 600 kg/h 2shoraj7b more
3
TECNOVA PELLETIZER 130 mm 54 L/D double degassing system the line is offered with COMPLETE RECONDITIONING (photos taken before overhauling) average production 450/600 kg/h depending on material Just before disconnection, it was producing 600 kg/h with PS flakes for PE PP PS ABS PC printed material, slightly moist material. screw diam. 130 mm 54 L/D forced feeding unit for lighter material a.c. motor 200 Kw + inverter (average consumption 60% in use) Ccuflewc double degassing system ... more
4
The IRS C180 Combi-line is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. It is equipped with a turbine mill for the processing of fine wire cables and has a cooling unit. Iwnlqqg This machine with the year 2012 was little used and has only about 900 hours. The plant also with pre shredder, conveyor belt with magnetic drum and cooling unit can be upgraded upon ... more
5
The compact 120 is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. This machine with the year 2012 is perfect for low-cost entry into the cable recycling. On request, the plant, thanks to electronic provision, even with pre Shredder can, feed conveyor, stronger drive (for better performance), screening machine for wire screening and/or cooling unit tooled are (no... more
4
The Compact 180 is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. This machine with the year 2015 is perfect for low-cost entry into the cable recycling. It was used for short presentations and small quantities and is in very good condition. On request, the plant, thanks to electronic provision, even with pre Shredder can, feed conveyor, stronger drive (for... more
4
The IRS C180 Combi-line is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. It is equipped with a turbine mill for the processing of fine wire cables and has a cooling unit. This machine with the year 2012 has a single shaft before Shredder M1840 and a transport belt with magnetic drum. Technical data: Pelletizing plant 24.0 kW Weight CA. 2.100 kg Dimensi... more
5
The Sincro 315 Guidetti is a small recycling plant for the recovery of copper from old and residual cables. The machine impresses with its small footprint, simple operation and low energy consumption. The integrated filter system with rotary valve reduces the frequent emptying of anthers and the low height makes the material ball in. This system with the built in 2010 and has only about 500 hours of operation. It is very well maintained, there was little use and is in near mint condition. Belong... more


Granulatin...
every day

New machines via email!

Be informed!
4
screw size 80 mm Lgarx Capacity bis 120 kg/h Drive 35 kW L/D 30 L/D engl.: complete granulating line for low bulk-weight materials like E-PS incl. strand-pelletizing equipment, very less operating 7000 hours The line is ready for demonstartion/test-run in our worlshop Wuppertal-Germany Date shortly by appointment more
6
Feed material: electric cable without interfering substances Capacity: up to 180 kg / h Power consumption: 8.5 kW Dimensions: (L x W x H) 1700 x 1300 x 2200 mm Weight: approx. 1200 kg Cable recycling system of easy 180 The easy 180 is a powerful recycling plant for the production of copper and aluminium from old and residual cables. The easy 180 features small footprint, easy operation and low energy consumption. The system is an in itself closed system and can be used in single man op... more
5
MG 220 T compact approx. 250-280 kg / h throughput mixing cables and 4 mm sieve with Verkugelungsmuehle Leasing is possible 1050 hours of operation Ba9faa3uer more
1
For sale is a complete cable granulating system with a 2-way cutting table, blower, cyclone, conveyor, suction, control cabinet and related Filteranlage.Alle components, exclusively from German manufacturers! Mill brand Herbold performance 22KW theoretical throughput approx. 900 kg / h (depending on what type of material will be processed). 2 set blades and various screens (also for wire cable). Fan also make Herbold incl. a cyclone. 2-way separating table make Trennso technology TST type TTS 60... more
6
Granulating plants diverse diverse used machine Baxsmhfr0o 3-stage shredding Year of construction: 2005 1 level - number of blades: 17 pieces 2 stage - number of blades: 32 pieces 3 level - number of blades: 39 units Performance of electric motors: 3 15 KW The shredding blades were completely replaced by new knife in 2014. Production line with excess Ribbon Magnet: (plate magnets): Year of manufacture 2004 Production line with head Magnet: Transported material by pre-cutting to the material... more
6
GRANULATOR GRINDING MACHINE Manufacturer: ADLER Year of Production: aprx. 1990 INSTALLED POWER: 15 kW VOLTAGE INQUIRY: 380 Volt NEW CONTROL PANEL: YES EMERGENCY STOP: YES LENGHT OF SHAFT: 600 mm NUMBER OF SHAFTS: 1 BLADES: 2 X 4 SHARP ROTATING BLADES ON ONE SHAFT FIX BLADES: 2 PCS ON TWO SIDES WORKING AREA: 600 X 500 mm Sieve: Yes, D: 8 mm OVERAL DIMENSIONS: 1100 x 1600 x 2400 mm WEIGHT: aprx. 1200 kg Grkfyhol Application: plastic, electrical waste cable, paper etc. We offer oportunity... more
2
Manufacturer: IRS (Italy) Year of construction: 2012 Baqpz7incg Power: 8.5 kW more
4
MEWA UG 1600 ML Cqkiirha Year of construction 1997 Only about 11000 hours of operation Very good condition more
6
Robust CM 100 granulator by THM,. Drive: 90 kW Rotor diameter: 495 mm,. Rotor length: 1000 mm, Dimensions (L/W/H) approx. 2000 x 2400 x 1100 mm,. Bafpuyloar Weight approx. 5.5 t, Incl. control cabinet, cpl. Wired, perfect machine for copper, aluminum, tire granulate, plastics, etc., Demonstration machine, only 9 hours, mint condition, similar to MEWA USM more
3
 Start Chat

Industrial Rubber Granulator GranutechSaturn M80

Physical Specifications: • 233” x 127“ x 176” • 45,000 Pounds Rotor: • Completely Hardfaced • 77.5” Length Cguj92tq • 34.5” Cutting Diameter • Star Rotor Design • 50 Rotary Knives • 10 Stationary Knives Power, Speed, & Torque: • 300 HP • 321 RPM • 5,000 ft-lbs of Torque • 60Hz Applications: • Tire Processing • Biomass • Waste to Energy • MSW • Non-Ferrous Metals • Electronic Scrap Features: • Replaceable AR500 Housing Liners • 3,500 sq. in. Screening Area • Hydraulic Lid Opening • Severe Du... more
6
Complete installation, incl.:- Pre-Shredder WS 30, 45 kW- Belt-conveyor incl. overband- Dosing-bunker- Granulating plant REDOMA Thuunderhawk 50 kW- Dedusting 93tcccfbu more
4
Cable Granulator and Seperation Plant RMH 1 W 4 KW Cutting Mill V Cutting Geometrie Complete Drive: 5,5 KW Water seperation Desk Z3bhxkol Gewicht: 600 kg Dimension: 1000 x 1200 x 1600 mm Lx B x H more
3
Granulator and Seperation Line RMH 6 D with Conveyer Belt, permanent Magneticsystem and pre Shredder WS 15 Details: RMH 6 D Granulator and Seperation Cutting Mill: V Cutting Geometrie Drive: 30 KW Dimensions LxBxH [mm]: 2500 x 1500 x 2800 Drive complete; 38,6 KW Weight: 3200 kg B3ujn Wagner WS 15 Pre Shredder Drive: 15 KW Working room: 675 x 600 mm Rotor lenght: 675 mm Blades: 44 Stueck Rotordiametre: 308 mm Hopper: 1.400 x 1300 mm Dimension: 2040 x 1850 x 1825 mm Weight: ca. 1.400 kg With... more
4
MG 220 T Cable Separations plant with Turbo hammer mill Optional: -Conveyor belt new -Pre Shredder RMR 170/400_12 KW Drive -electrisches System to stop the Conveyor belt -Permanent Magnet with steel Construction different machines Comes new Wbeuay8kk short delivery time more
3
Feed opening: 600 x 240 mm Feeding height: 1.165 mm Cutting chamber : 650 x 300 mm Bsvdyz3ls Rotor length :: 600 mm Rotor diameter: 200 mm Rotor-speed: ca. 500 rpm Number of rotor knives: 8 x 300 mm Number of stator knives: 2 x 600 mm screen size: 3 - 12 mm control: electronical by SPS control cabinet: completely cabled Motor power: 22 kW connected load: 400 V +/- 5 % / 50 Hz paint: RAL 2002 und RAL 7035 weight: approx 610 kg more
6
Year 2015 approximately 500 hours of operation Granulator: Number of blades: 5 rotor, stator 3 8npb07rjt Blade length: 500 mm Drive: 22 kw Throughput: approx. 150-300 kg / h depending on the filter size, materials, etc. Cutting table Width: 600 mm Length: 1000 mm Drive: 3,0 kw Extraction: 4,0 kw more
4
Cable granulating system with Verkugelungsmuehle Cjtulseq Throughput approx. 150-180 kg / h cable input (depending on cable type) Optional with Vorschredder more
5
For sale is a new cable granulation. Technical data: Voltage: 380V Frequency: 50 Hz Total output: 36 kW Weight: 3000kg Dimensions: 3,5m x 2,0m x 2,8m cable diameter: 0,3-20mm performance: * 300 350 kg / h per hour cable * the performance depends on the type of cable commissioning warranty: 1 month Demonstration. The machine was tested offered two months. New machine costs 35,000 Net The cable granulation is suitable for various types of copper cables. The cable diameter can be up to 20mm. Cable ... more
3
Capacity: up to 250 kg / h (INPUT) Power consumption of the system: 24 kW Dimensions: (L x W x H) 2,840 x 1,600 x 2,430 mm Weight: CA. 2.100 kg Including cooling system. System components: 1) granulator for pre-cutting (2) turbine mill for fine crushing and processing recorded Lmdj27hx (3) pneumatic transport system (4) separator for separating material (5) cooling unit Through the use of a fast-rotating turbine mill allows the processing of cables of all kinds. The turbine mill... more
5
The granulator is 180 suitable for crushing of process materials, such as: plastics, electric cables, copper wires... The system is not equipped for the connection of a cooling unit (cooling blocks on front and back and the two bearing positions) Included: Knife set (24 rotating and 2 counter blade) Hole screens: 2 - 3-4 mm Operating instructions in German. Version: CE - compliant Feed material: Plastics, electric cables, copper strands... Power: 5.5 kW 380V 7lg83n32x Cutting device... more
6
Process material: mixed cables iron free or AL-CU-coolers* Capacity: app. 150 kg / h E-Motor: 19 kW 50Hz Dimension: L 1700 x W 1350 x H 2300 mm Xubnj8vlu Filter tower: L 800 x W 800 x H 3200 mm Weight: app. 1200 kg *additional Equipment required: pre-shredder TG500 + conveyor belt more
6
Plastic grinder BI-Cutter granulator Without display BI cutter granulator. Manufacturer: SRS Type: SR-68 motor data Nissen TET12 0.4kW 230 / 460V 60Hz 1.56 / 0.78 speed: 1690 / min is added to size: 6 "x 8" S-blade speed: 15 / min rotary cutter speed: 45 / min finished goods size: 4 * 5mm Yq0ned2z9 more
5
Angussgranulator cutting mills screw model! Manufacturer: Rapid Type: 1521A Year: 1997 4.6 KW 230 / 400V 50Hz speed: 1440 / min Rotor speed: 150 / min rotor diameter: 160 mm rotation blades: 9 pieces yet knives: 2 pieces B7qhhe33 more
6
Plastic grinder BI-Cutter granulator Without display BI cutter granulator. Manufacturer: SRS Type: SR-1013 engine data Yaskawa FECQ-T2 1HP 230V 60Hz 3.2 0,75KW speed: 1740 / min is added to size: 10 "* 13" S-blade speed: 18 / min Rotary Cutter speed: 60 / min finished goods size: 6 * 6 mm 3dexoc9b more
6
Angussgranulator cutting mills Manufacturer: Tria type: 20-15 / BLT Year: 2000 230 / 400V 50Hz 1.5kW 6.8 / 3.9A power: 20-30 kg / h Rotary Cutter: 3 Still diameter: 2 Rotor Diameter: 150 mm Rotor speed: 220 / min Yqyijeigy more
6
Angussgranulator cutting mills Manufacturer: Tria type: 22-20 / BLC screw model year: 1998 400V 50Hz 3kW power: 30-50 kg / h Rotary Cutter: 3 Still diameter: 2 Rotor Diameter: 162 mm Rotor speed: 280 / min Vrg8fu more
6
Granulator Crusher Grinding machine in perfect condition Technical Parameters: Engine: SIEMENS Installed power: 2,2 kW Shaft length: 140 mm 9mh7ztukj Voltage request: 400 V/ 50Hz/ 3 fase Working space: 140 x 150 mm Nr. of Shaft: 1 PC Blades: Rotating blades: 2 x 3 PCS Fix blades: 2 PCS Sieve: Yes Hopper: Yes Application: waste aluminum cable, copper cable, plastic parts;. Dimensions: 500 x 600 x 1300 mm Weight apprx.: 200 kg more
3
Working system Overall dimensions: approx. 8,000 X 4,100 X 6,000 mm Built in module: 2008 Installation press: 2009 Operating hours press (as of 2013): approx. 3,900 hrs Hours of operation system (as of 2013): approximately 7,200 STD calculation basis Product: Nadelholzspaehne Product press: Dosierfaehig, free of metal and stones Humidity press: 10-14 H2O Bulk density press: 100-120 kg / m3 pellet: ø 6 mm or ø 8 mm Power of the press: approx. 1,500 kg / h at hardwood approx. 1,800 2000 ... more
6
Condition: very good, little went Performance: 3.5-4.5 t/h Wood pellets Complete system incl. Pelletkuehlung without VerpackungsanlagePresse: Salmatec Maxima 700 Together with this system also a tumble dryer can be purchased, power 8-10 t/h water evaporation Main components of the Pelletturms: Mill hopper Binder task Hammer mill system including gravity separators, hammer mill, and total separator Humidity control including Konditioneur and maturing tanks Forced feed pelleting pr... more
6
Max out your line capacity with Phoenix XD PLUS fully automated wire chopping line. Our mini-plant, Phoenix, is upgradeable to Phoenix XD PLUS at any time with our "XD PLUS Upgrade" module. You never lose your initial investment if you first purchase Phoenix then decide to upgrade later. The included Wagner WS30 60 HP Shredder features a large infeed hopper capable of handling large coiled material and gaylord quantity loads at a time! No pre-cutting necessary. No need to de-spool plastic spools... more
5
The 300 C a powerful recycling plant for the production of copper granules from old and residual cables is easy. The machine impresses with its small footprint, ease of operation and low energy consumption. The cable will be crushed first homogeneously in a granulator. Evenly distributed single blades ensure a balanced, low power consumption of the mill. The granule size is set by the used hole sieve. The thinner the wires in the cables, the smaller the required diameter screen. The shredded m... more
5
The IRS C180 Combi-line is the compact and highly efficient recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. It is equipped with a turbine mill for processing of fine wires and data cables. The cooling unit reduced to melting and blockages. This plant is a reinforced, brand new facility of latest configuration for unmatched performance. She is not equipped for the connection... more
6
Cable recycling system for professionals:-wear arms vertical impact crusher for granulation in place a granulator -Grinding of knives is eliminated. -Built-in ZigZag separates crude copper. -With turbine mill to the ver recorded. -Optional, a cooling unit can be connected to the turbine mill. -Optimized cutting table for best copper separation qualities -Pre-equipped to operate with pre shredder and filling - belt feeder -Compact design, easy operation, easy maintenance Technical dat... more
6
The compact 120 is a powerful recycling plant for the extraction of copper from old and residual cables. The machine impresses with its small footprint, ease of operation and low energy consumption. This machine is perfect for low-cost entry into the cable recycling. On request, the plant, thanks to electronic provision, even with pre Shredder can, feed conveyor, stronger drive (for better performance), screening machine for wire screening and/or cooling unit tooled are (not included). Te... more
1
screw size 52 mm Capacity 300 kg/h Drive 45 kW Ru3dnnjjl L/D 44 L/D more
5
Max out your line capacity with Phoenix XD PLUS fully automated wire chopping line. Phoenix plant is upgradeable to Phoenix XD PLUS at any time with our "XD Upgrade PLUS" module. You never lose your initial investment if you first purchase Phoenix then decide to upgrade later. Included Wagner WS30 60 HP Shredder features a large infeed hopper capable of handling coiled material. No pre-cutting necessary. No need to de-spool plastic spools. "PLUS" adds an additional CM50 cutting mill. SB15 Storag... more
6
PHOENIX is a professional turn-key mini-plant with the substantial capacity to process *1,200-2,500 input lb/per hour with mixed cable, depending on size and yield. Process approximately 120,000 lb/per month with a one-shift operation. This estimate includes maintenance downtime for blade changing and lubrication. The cutting mill is equipped with a premium efficiency IE3 50 hp motor. Add 25% capacity by adding a free standing CM50, called Phoenix +. 2teeq2ij The power requirement is 100 amps,... more
6
PHOENIX PLUS is a professional turn-key mini-plant with the substantial capacity to process *1,200-2,500 input lb/per hour with mixed cable, depending on size and yield. Process approximately 150,000 lb/per month with a one-shift operation. This estimate includes maintenance downtime for blade changing and lubrication. The cutting mills are equipped with a premium efficiency IE3 50 hp motors. This "PLUS" version adds another cutting mill for a 25% - 100% capacity increase by incremental size red... more
5
For sale is a new cable granulating system. technical data: Voltage: 380V Frequency: 50 Hz Csozyzzg Total capacity: 36 kW Tj33i0n8z Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Performance: * 300 350 kg / h cable per hour * the performance depends on type of cable Operation guarantee: 1 month Demonstration machine. The offered machine was tested for two months. New machine costs €35,000 net The cable granulating system is suitable to various ... more


Granulatin...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close