Used Generators for sale (10,687)

Condition: repair required (used), machine/vehicle number: MT31556, overall weight: 1,780 kg, color: grey, output current: 981 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power (apparent): 680 kVA, rotational speed (max.): 1,500 rpm, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The product was serviced many years ago and needs inspection before commissioning. For more details, please contact us. Specifications: Generator type: MJB 355 MA4 Code: MJB3532G067M0 Weight: 1780 kg Phases: 3 Serial number: MT31556 Insulation class: H Degree of protection: IP 23 Power factor (P.F.): 0.8 S1 CONTINUOUS DUTY (at an ambient temperature of 40°C): 680 kVA Nedpfx Aljt Hvftocelc Voltage: 400 V (Y-star configuration) Current: 981 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 26.5 V Excitation current: 3.9 A 660 kVA Voltage: 220 V (Y star configuration) Current: 1732 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 26.5 V Excitation current: 3.9 A 775 kVA Voltage: 440 V (Y star configuration) Current: 1017 A Frequency: 60 Hz Speed: 1800 rpm Excitation voltage: 24.4 V Excitation current: 3.7 A STAND BY DUTY (at an ambient temperature of 27°C): 750 kVA Voltage: 400 V (Y-star configuration) Current: 984 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 28.6 V Excitation current: 4.2 A 855 kVA Voltage: 440 V (Y star configuration) Current: 1122 A Frequency: 60 Hz Speed: 1800 rpm Excitation voltage: 25 V Excitation current: 3.8 A Standards and Certifications: Standards: EN 60034-1, IEC 60034-1 CE Mark

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Maximum overpressure in the pipes: 0.2 bar Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pipe volume: 40 l EQUIPMENT Dew point or cp control Nedpfx Alszddb Eocslc Soot filter in duplex version Fully automatic power control in the range of 50-100%

Condition: used, Little used Proton OnSite C20 electrolytic hydrogen generation system made in 2018. The system was installed and tested but never put into operation due to owner dropping the project. Key information includes: Nodpfx Alozcwkkscolc - Capacity: 20 Nm3/h, 760 SCFH, 359 SLPM, 43.3 kg/24 hours. - Purity: 99.9998%, water vapour

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Nlodpfx Aloruakgscsc Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Nledjxaqa Sopfx Alcec Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Nlodsxdfazepfx Alcsc Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Nedpfxsxdfa Uo Alcelc Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Nsdpfxjrtryks Alcjlc Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Nedpfxsi Uli Eo Alcelc

Condition: used, Year of construction: 1988, operating hours: 17,000 h, 1988 | Atlas Copco QAS125KD | Used Generator Set | 17000 hours 📍Location: France Nljdpfx Alszg Nr Hocec 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 16 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 17000 hours noting that the meter may not be working since it's illegible; engine that runs impeccably; generator set fixed on the trailer. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40886 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2010, operating hours: 12,707 h, 2010 | Worms Silentstar 20 TYN | Used Generator Set | 12707 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 3500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 19 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Nlodpfezg A Izjx Alcec It is in good condition, considering the 12,700 hours of operation. During an hour of inspection, I did not notice any problems, but the onsite mechanic reported that the piston rings are worn and the engine stalls under heavy load. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40895 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, machine/vehicle number: 213357, Own weight: 710 kg, Power: 20 kVA Nodey Rvrkopfx Alcelc

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Manufacturer: MS, Ultrasonic welding generator -Type: SoniGEN 35/1000 or similar, unfortunately no exact designation -Power output: kVA Nsdpfx Aloxxkbaecjlc -Dimensions: 460/150/H150 mm -Weight: 5.5 kg

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with a series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, easy operation, and high efficiency) in a series resonant circuit and a compact design, with cooling integrated into the generator cabinet. Rittal generator cabinet and GH Induction TC150/2 resonant circuit Nljdjzdp H Sepfx Alcoc Voltage 400V, Frequency 50 Hz, Current 56 A, Power 37.5 kVA In like-new condition! Scope of supply: Transistor generator, Rittal generator cabinet with cooling, and TC150/2 resonant circuit (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, A rotating frequency generator produces 60Hz alternating current from 50Hz alternating current. In mint condition. The device can be converted to a diesel generator. Manufacturer: YAMADA DENKI CO LTD Type: RFC-3543E; series: 80155 Power: 350 kVA Input: 415 V; 50 Hz Output: 415/215 V; 60 Hz Operating hours: 3624 h Electric motor: AM-355 W; 350 kW; 415 V; 546 A; 50 Hz; 1500 rpm Synchronous generator: M3834; 400 kVA; 415/210 V; 60 Hz; 1400 rpm Nlodpsy Ak Dfofx Alcec

Condition: new, Year of construction: 2026, machine/vehicle number: D25I158946, fuel type: diesel, motor manufacturer: X3.3-G1, General information Field of application: Construction Weights Empty weight: 842 kg Functional Generator capacity: 38 kVA Dimensions of cargo space: 196 x 82 x 129 cm CE mark: yes Other information Fuel consumption: 7 Liter per Hour at 75% Load Generator: Stamford S1L2J1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 50 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Nljdpfx Aezhfgpslcec = Remarks = Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Condition: new, Year of construction: 2026, machine/vehicle number: F25L159291, fuel type: diesel, motor manufacturer: X2.5-G2, General information Field of application: Construction Weights Nledpfszhfgcsx Alcoc Empty weight: 757 kg Functional Generator capacity: 22 kVA Dimensions of cargo space: 196 x 82 x 129 cm CE mark: yes Other information Fuel consumption: 4.4 Liter per Hour at 75% Load Generator: Stamford S0L2-G1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 55 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Condition: new, Year of construction: 2024, power: 64 kW (87.02 HP), total length: 2,300 mm, total width: 1,010 mm, total height: 1,460 mm, Selling price: € 12.250, US$ 13.960 Njdpfx Ajxf Dtislcslc

Condition: new, Year of construction: 2024, fuel type: diesel, color: green, power: 75 kW (101.97 HP), total length: 2,300 mm, total width: 1,010 mm, total height: 1,460 mm, Empty weight: 1.300 kg Selling price: € 14.950, US$ 17.030 Current frequency: 50 Hz Voltage: 400 Nlodpfxexf Dtce Alcoc

Condition: new, Year of construction: 2024, color: green, power: 136 kW (184.91 HP), total length: 3,460 mm, total width: 1,090 mm, total height: 1,840 mm, Selling price: € 23.950, US$ 27.280 Nledpoxf Dr Eefx Alcec Current frequency: 50 Hz Voltage: 400

Condition: new, Year of construction: 2023, power: 1,150 kW (1,563.56 HP), total length: 6,460 mm, total width: 1,600 mm, total height: 1,840 mm, Selling price: € 129.500, US$ 147.500 Current frequency: 50 Hz Nlsdpfx Aoxfrz Ielcoc Voltage: 400

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Engine Model: Volvo Penta TAD 520 GE Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM:1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Cooling: Water-cooled Control Panel: Integrated Condition: Used, in good working order Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Njdpswzimcjfx Alcslc Ready for inspection and immediate dispatch Photos available upon request.

Condition: new, Year of construction: 2007, color: green, power: 190 kW (258.33 HP), total length: 3,010 mm, total width: 1,600 mm, total height: 2,000 mm, Empty weight: 15.400 kg Power: 180 Current frequency: 50 Hz Voltage: 400 Nlodpfxey Snxle Alcoc

Condition: new, Year of construction: 2026, machine/vehicle number: 2017005997, fuel type: diesel, power: 660 kW (897.35 HP), motor manufacturer: TWD1744GE, General information Field of application: Construction Weights Empty weight: 6.424 kg Functional Generator capacity: 825 kVA Dimensions of cargo space: 492 x 173 x 260 cm CE mark: yes Other information Nledpfxjv Uhp Rs Alcjc Fuel consumption: 114 Liter / Hour at 75% Load Generator: Stamford S5L1D-H41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 940 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 2016190425, fuel type: diesel, motor manufacturer: Volvo TWD1645GE, General information Field of application: Construction Weights Empty weight: 5.820 kg Functional Generator capacity: 770 kVA Dimensions of cargo space: 491 x 171 x 257 cm CE mark: yes Other information Fuel consumption: 113.1 Liter/Hour at 75% Load Generator: Stamford S5L1D-G41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 897 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Nlsdpfx Asxd Nzvjlcec - Steel canopy - Tank