Used Petrol Generator for sale (9,764)

Condition: used, This petrol power generator 3.5 kW is being auctioned online in our industrial/machinery auction (range clearance – warehouse sale – single/display units). Fgjdpfx Akjy Hrbmsvjb

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Fgsdpfexfrv Esx Akvjb Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Fgodpfsy Av Rdox Akvjb Designed for solid fuel like, wood chips, sawdust, bark

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Fgedpfx Akov Uag Iovjb

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Fgedpfoyl Nntex Akveb

Condition: new, Year of construction: 2013, Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313, 3pcs. Fgedpfx Ajvvh H Eskvsb

Condition: new, Year of construction: 2014, machine/vehicle number: 44704, Petrol Valves A182-F51, type BALL, 12", class ASME 600, body A182-F51 NACE. New. Fjdpfx Aovvh Szekvsgb

Condition: new, Petrol Valves batterfly valve 24inch, 150# Fedpfx Ajvvhvyekvjgb New equipment purchased from Statoil.

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period. Fedpfxox U Tgmj Akvjgb

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Fgodpfxow U N Dae Akvsb

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: Fgedpfjruakgsx Akvsb B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Fsdoxaqa Sspfx Akvjgb Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Fedpfx Asxdfazokvjgb Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Fodpfsxdfa Usx Akvjgb Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Fedortrykepfx Akvogb Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 2023, operating hours: 899 h, machine/vehicle number: ESF407088, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Fgsdpfoyxam Ijx Akvob Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 2,061 h, machine/vehicle number: ESF407153, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Fjdpfx Asy N Nh Nekvegb Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 1,365 h, machine/vehicle number: ESF407146, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information Fgedpfx Asy N Nhvekvjb

Condition: used, Year of construction: 2023, operating hours: 1,237 h, machine/vehicle number: ESF407147, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Fgodpfey N Nhiex Akvsb Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 3,148 h, machine/vehicle number: ESF407154, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Fodpfx Aey N Ng Ejkvjgb Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 4,854 h, machine/vehicle number: ESF407157, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Fgodoy N Ngrjpfx Akvob Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 4,287 h, machine/vehicle number: ESF407158, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Fodpfsy N Nglsx Akvogb Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 3,200 h, machine/vehicle number: ESF407188, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Fedpfxsy N Nf Uj Akvsgb Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 1,568 h, machine/vehicle number: ESF407187, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Fgsdpfxoy N Nfuj Akvsb Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 4,424 h, machine/vehicle number: ESF407160, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Fsdpfxey N Nfhe Akvegb Generator capacity: 105 kVA Dimensions of cargo space: 290 x 115 x 171 cm Please contact PFEIFER GROUP for more information