Mechanicians lathes for sale
Identified location: Ashburn (US) (Edit)
turning diameter over bed 297 mm
turning diameter over slide rest 160 mm
turning length 500 mm
turning speeds 320 - 2000 U/min
turning speeds steps stufenlos
spindle bore 36 mm
spindle head Größe 5
taper bore MK 5
longitudinal feeds: 0,008 - 1,148 mm/U
face feeds 1/2 Längsvorschub
Gfxebgx
thread - mm pitch 0,2 - 12 mm
thread - inch 2 - 80 Gang/ inch.
thread - module o,1 - 4 mm
total power requirement 2,2 Kw
weight of the machine ca. 0,61 t
dimensions of the machine ca. 1,40 x 0,70 x 1,30 m
... more
used
Lathe, lathe, mechanic lathe
- Delivery as is as seen
-Spindle bore 23 mm
Cifowqu2i
- Adapter sleeves / thread adapter M37 x 3 mm
-Dimensions 850/430 / H1160 mm
-Weight 288 kg more
used
turning diameter over bed 260 mm
spindle passage 28 mm
turning length 330 mm
centre height 125 mm
bed width 160 mm
bed length 800 mm
spindle turning speed range 12 von 115-3000 U/min
swing diameter over slide rest 125 mm
travel of turret slide 100 mm
B7t07hwy
turret head - bore/travel 140 mm
cutt-off slide way 90 mm
taper in turret slide 6
max. distance betw. turret head ans turn spindle 330 mm
total power requirement 0,37 / 0,88 kW
weight of the machine ca. 360 kg
dimensions of the machine ca.... more
used
turning diameter over bed 330 mm
turning diameter over slide rest 200 mm
Hmyd790
turning length 800 mm
spindle turning speed range 24 - 2800 U/min
spindle bore 38 mm
tailstock taper MT 3
feeds 0,026 - 1,253 mm/U
metrical thread cutting 0,35 - 12 mm
total power requirement 3 kW
weight of the machine ca. 0,8 t
dimensions of the machine ca. 1,9 x 0,7 x 1,2 m
Qick Toolholders Multifix more
Centre height: 132 mm,
Centre distance: 450 mm,
Spindle bore: 30 mm,
Ffzk2kjry
Spindle speed: 220 - 1800 rpm,
drive: 0,74 kW,
Remark:,
Four jaw chuck Ø 135 mm with interchangeable jaws,
Hand lever support,
Hand lever tailstock,
Collet quick clamping device with
15 collets 2 - 22 mm,
Drill chuck,
Weight: 300 kg, more
2002
good (used)
L + Z lathe GDW type LZ 360 S
Precision center lathe
Center distance 800 mm
turning diameter over bed 355 mm
Turning diameter over cross slide 195 mm
Centre height above bed 175 mm
Centre height over cross slide 97 mm
Spindle bore 43 mm
Feed longitudinal and planar
Chuck absorption short taper DIN 55027 size 5 (4x M10)
Tailstock inner taper MK 3
quill adjustment / quill stroke 110 mm
Bkas92migu
Spindle speed 30 - 3000 rpm
driving power 5,5 kW
Connected load 11 kW
Power supply 400 Volt, 50 Hz
- I... more
turning diameter over bed 360 mm
turning diameter over slide rest 220 mm
turning length 1000 mm
turning dia. in gap 515 mm
spindle bore 38 mm
spindle turning speed range 30 - 2200 U/min
feeds - longitudinal 0,067 - 1,485 mm/U
feeds - cross 0,033 - 0,742 mm/U
Nnrav
voltage 400 V / 50 Hz
total power requirement 2,5 kW
weight of the machine ca. 0,75 t
dimensions of the machine ca. 2,3 x 1,0 x 1,5 m
with 3- and 4- jaw chuck,
2 axis-digital display NEWALL,
fixed and live steady,
Machine l... more
used
Lathe, lathe, mechanic lathe
-Turning length: 400 mm
-Diameter over bed: 220 mm
-Diameter over support: 150 mm
-Speed: 140-3550 rpm
-Spindle bore: 35 mm
-chuck diameter: 150 mm
-Lining: M60 x 4
-Tailstock mount: MK2
Gtqvy0
-Collet set: 1-27 mm
-Dimensions: 1600/650 / H1500 mm
-Weight: 400kg more
excellent (used)
Accessories available
- Digital display
Centre height 200 mm
centre distance 750 mm
Turning Ø
via slide 235 mm
Bh722bnu0i
above bed 425 mm
Speed 45 - 2240 rpm
Recording Camlock D6"
spindle bore 45 mm
face and longitudinal feed 0.05 - 2.8 mm/rev
Ø of the tailstock sleeve 55 mm
Morse taper of spindle and tailstock MK 4
Spindle motor 8 HP
Replaces 2018: SENC 150, coupling, power supply TSN-8, radial shaft seal 80x100x10
Everything provable incl. invoice from purchase more
turning diameter over bed 310 mm
turning diameter over slide rest 178 mm
turning length 910 mm
spindle bore 38 mm
spindle turning speed range 80 - 2000 (18) U/min
Bjszmchr
upper slide-adjustment 100 kW
longitudinal feeds: 0.052 - 1,392 mm/U
metrical thread cutting 0,4 - 7 mm
threading WHITWORTH 58 - 8 TPI
total power requirement 1,1 kW
weight of the machine ca. 420 kg
dimensions of the machine ca. 1,6 x 0,75 x 1,4 m more
Lathe Weiler MD 260
Turning range max. 260 - 500
Speeds 220 - 1800
Spindle passage 31
Tailstock MK 2
Collets
Bjws7dazat
3 jaw chuck
Drill Chuck
rotating tip
Faceplate
Lynette
Multifix A with 4 holders
Dimensions : L 1,12m H 1,2m W 0,46m
Weight approx. 250 KG
Condition Good runs clean and quiet more
Mechanical lathe WEILER MDU 260-28
Year of construction: approx. 1980
Bjjknghjah
Country of origin: Germany
turning diameter over bed 260 mm
Turning diameter over support 140 mm
turning length 500 mm
Spindle bore 28 mm
Spindle speeds max. 1800 rpm
spindle motor 1,00/1,60 kW
cross slide travel 120 mm
longitudinal slide 120 mm
Total power requirement 2 kW
Space requirement approx. 1500 x 1000 x 1500 mm
Machine weight approx. 500 kg
All information without guarantee.
The machine is in good conditio... more
turning diameter over bed 325 mm
turning diameter over slide rest 220 mm
turning length 1500 mm
turning dia. in gap 400 mm
spindle turning speed range 48 - 1500 U/min
spindle bore 40 mm
tailstock taper MT 3
feeds - longitudinal 0,0216 - 2,409 mm/U
feeds - cross 0,0097 - 1,0838 mm/min
thread - mm pitch 0,25 - 16 mm
thread - inch 1,5 - 28 Gang / inch.
total power requirement 2,2 kW
weight of the machine ca. 0,82 t
dimensions of the machine ca. 1,7 x 0,7 x 1,4 m
Btxunwrt
with draw-in collet chu... more
excellent (used)
Centre height/Centre width 102/385 mm
Spindle bore 20 mm
Speed (18 steps) 45-3000 RPM
Chucks W20
Internal cone tailstock MT2
Turning diameter over bed 200 mm
Qzytw2m
Turning diameter over cross slide 120 mm
Power 0,8 HP
Drive 380V / 1,5kW
Dimension (WxDxH) 133x62x124 cm
Weight 500 kg
Accessories available incl. 1 pc. manual more
For sale is a Maho Graziano GR200 W mechanic lathe in GOOD condition! Incl. many accessories! Price is VHB! For questions or if you are interested, please do not hesitate to contact us!
Technical data
Centre height 210 mm
Center distance 1500 mm
Turning diameter over cross slide 268 mm
Turning diameter in the offset 580 mm
Spindle bore 57 mm
Collet chuck holder D1 6"
Spindle speeds:
Number (steps) 24
from 38 rpm
up to 2000 rpm
Tailstock quill mount: 3 MK
quill diameter 68 mm
quill ... more
reconditioned (used)
Beautiful old but fully functional mechanic lathe from FSB with 4 speeds. Built 1920 - 1940. weight 254 kg. 400 Volt.
Length 1100 mm, width 950 mm, height 1260 mm.
Centre height above bed 140 mm, centre width max.320 mm.
Prjcxzrt
Accessories : New three-jaw chuck d 125mm Sandu, tailstock with quick-action drill chuck ,fixed and revolving centre, clamping sleeves and much more. See pictures.
Loading possibility available. more
Year of manufacture 1973
spindle height 125mm
En7x7vpxs
max circulation Ø over bed 260mm
max circulation Ø over slide
max. centre distance 500mm
Spindle passage 28mm
cross slide feed 120/90mm
longitudinal slide feed 110/90mm
max quill adjustment by hand with lever 100mm
max tailstock shifting by hand on bed 450mm
Space requirement approx. 1300 x 600 mm
height approx. 1200 mm
Weight approx. 400 kg more
turning diameter over bed 310 mm
turning diameter over slide rest 178 mm
turning length 910 mm
Bg900azujs
turning dia. in gap 420 mm
spindle turning speed range 70 - 2000 U/min
spindle bore 38 mm
number of feeds 18 Stk
feed range 0,052 - 1,392 mm/U
metrical thread cutting 0,4 - 7 mm
voltage 230 / 50 V Hz
total power requirement 1,1 kW
weight of the machine ca. 0,45 t
dimensions of the machine ca. 1,6 x 0,8 x 1,4 m
incl. 3 and 4 jaw chuck
fixed and followed steadies
reducing bush MK4 - M... more
1 USED MECHANICAL LATHE RAMO A60
- Center height : 300 mm
- Distance between centers : 1350 mm
- Spindle speed : 26 to 1250 rpm
- Manual and automatic movement of the trainer
-Equipped with :
Mu2thw
- 1 Chuck 3 jaws ∅ 310 mm
- 1 Visu 2 axis HEIDENHAIN
- 1 Fast turret
Machine upgraded more
Style 1200 lathe in very good condition, built in 2009
Eh7b0n8ja
2000mm between centres
Turning diameter over the bed 1200mm
Year of construction 2009
Longitudinal and transverse feeding
Hardened bed
Maximum 740 rpm variable
Weight 10000kg
Machine standard equipped with:
Digital readout X-Y axis FAGOR
Machine Lighting
Cooling installation
Multifix chisel holder with 4 blades
Three claw
Machine according to ARBO more
Turning diameter over bed 320 mm
Dr8oikwl
Distance between center 750 mm
Spindle speed 4,000 min-1
4-way holder
Tailstock
Chip conveyor
3-jaw chuck
2 tool holders more
2019
new
Description
B7ekowqu
Lead screw lathe with feed gear for demanding users
Precise processing
Powerful maintenance-free motor,
Prism strongly ribbed, bed made of cast iron, induction hardened and precision ground
Hardened and ground guide rail Z axis
Guaranteed accuracy of spindle nose better than 0.009 mm
Concentricity of the Chuck better than 0.04 mm
Automatic longitudinal / lead screw drive
Leadscrew for threading or automatic longitudinal turning
Right / left rotation in the control ... more
good condition (used)
We offer a used but fully functional and well preserved Schaublin 102N-80 precision lathe.
The offered lathe originally comes from the stock of a watch workshop.
Headstock is equipped with a F27 spindle nose.
Large clearance but a 125mm chuck has only 32mm clearance.
The machine runs backlash free.
This machine is without feed !
Equipped with reduction gear and brake.
It is in a very good technical condition.
The paintwork is not renewed.
Engine room protection cap is renewed ! (Steel.)... more
height of centers: 90 mm
center distance: 400 mm
spindle boring: 25 mm
speed range: 280 u. 900 rpm
engine: 380 V, ca. 1 kW
Pycbcoapn
space needed: 1150 x 650 x 1120 mm
weight: 253 kg more
- Stock N° : EX271
- Distance between center : 750 mm
- Height between center : 180 mm
- ∅ Spindle passage : 42 mm
- ∅ over the bed : 400 mm
- ∅ over the slide : 200 mm
- Width of the bed : 330 mm
- Travel of the transversal slide : 180 mm
- ∅ of the sleeve : 60 mm
- Sleeve travel : 140 mm
- Spindle taper : CM5
- Taper tail stock : CM4
- Spindle power : 5,2 kW
- Spindle speed : 50 à 3000 Tr/min
- Machine dimensions : 2000 x 1000 x H1300 mm
- Machine weight : environ 1300 KG
Equipped with :
- 1 T... more
Mechanical lathe/ finishing lathe make FEINBAU type PM 1 FZ
Machine #3641
Technical data:
Centre height 110 mm
gr. swing diameter over bed 220 mm
Bhbyvgkgnd
gr. turning length 65 mm
centre distance 170 mm
3 spindle speeds 670 / 1440 / 2840 rpm.
Drive power 0,5 kW
Weight approx. 175 kg
Outer dimensions approx. 500 x 1100 x 1250 mm
with
- Crank support
- Lever support
- Collets
- Quick-change tool holder
used, in good condition more
Manufacturing origin CH
Voltage 400 V
Custom position 8458.9120
as New - abt. 100 hrs
centres height 500
Yse7co
between centres 2000 mm
Digital read-out Fagor 30i-T
TECHNICAL DATA
Between centers 2000 mm
Center height 500 mm
Bar passage 160 mm
Swing over cross carriage 720 mm
Diameter in bed gap 1250 mm
Bed gap lenth 350 mm
Bed width 550 mm
Spindle speeds 18 from 10 to 780 min-1
Number of ranges 2
Main motor power 15 kW
errors and omissions excepted-data given without obligation
Inventor... more
Machine also available without infinitely adjustable speed (€6900 Excl. VAT)
Bed made of cast iron, heavily ribbed
all guides induction hardened and precision ground
Main spindle with D1-4 "recording, hole Ø 38 mm, made in 2 adjustable precision Taper roller bearings
all gears from Cr-Ni steel, hardened, precision ground, running in oil bath
Tailstock can be moved to the taper turning 10 mm ±
Guided tours of the wedge bar adjustable
Acceptance Protocol according to DIN
with 3-axis position displ... more
Revolverdrehmaschine Weiler RDU 260/38 04-03-107
Lieferzeit: sofort
Nummer: 04-03-107
Maschinendaten
Baujahr: 1971
L x B x H: ca. 1400 x 700 x 1400 mm
Gewicht: ca. 600 kg
Sehr guter Allgemeinzustand
Technische Daten
Dimensionen:
Max. Drehdurchmesser über Bett: ca. Ø 260 mm
Bfxgtta380
Spitzenhöhe: ca. 125 mm
Stangendurchlass: ca. Ø 38 mm
Spindel:
Drehzahlbereich: ca. 110 – 3600 U/min
Zubehör
-Spannzangeneinrichtung
-28 Spannzangen
-Komplette Maschinendokumentation
... more
ready for operation (used)
PROGRES LATHE
5 m between the centers
turning diameter 600 mm
spindle hole 90 mm
good working condition
fixed price , free loaded on a truck
Nx9fp more
- Distance between centers : 350 mm
- Centers height : 102 mm
- Spindle speed : 270 - 3000 rpm
Equipped with :
- 1 Visu 2 axis HEIDENHAIN
- 1 Gearbox for turning and threading
- 1 Fixed steady
- 1 Steady to follow
Bjgewy9nk9
- 1 Multifixe turret
- 1 Clamping clamp W20
- 1 Set of collets W20
- 1 Headstock with stolen harness
- 1 Mechanical tailstock more
Table universal counter-steering machine Fabr. Lake type RAPID
Technical data:
Tip height 125 mm
Spindle bore 36 mm
Spindle cone MK 5
infinitely variable spindle speeds 465-4200 RPM.
Cs7w3oji
Table size 300 x 265 mm
Supportlängsweg 100 mm
Cross support travel 125 mm
0.37 kW
Electricity 380 V / 50 Hz
Weight approx. 100 kg
Dimensions approx. 850 x 400 x 350 mm
with
-without stand
-Three-jaw Chuck 125 mm
-Clamping claw
used, in good condition more
Manufacturing origin France
Voltage 380/50/3
Netweight 1300 kg
Dimensions 2000x1000x1250
Total power 5,2 kW
Custom position 8458.19 20
TECHNICAL DATA
Capacities
Centres height 180 mm
Distance between centres type A & B 800 mm
Distance between centres type C & BC 750 mm
Maximal length by continuous turning-off 730 mm
Max. diameter upon bench 360 mm
Max. dia. upon arms of carriage-body 360 mm
Max. dia. upon transverse sliding block 190 mm
Workbench width 330 mm
Bgtao0kgev
Headstock
Spindle hol... more
DescriptionCompletely equipped mechanic lathes. TH 3610D with digital position indicator DPA 21 Hardened and ground Z-axis guideway Spindle mounting Camlock DIN ISO 702-2 No. 5 Precisely machined carriage Handwheels with adjustable fine scaling 0.04 / 0.02 mm Quadruple steel holder All guides can be readjusted by V-bars Main spindle running in oil bath Gear wheels smooth-running, hardened and ground Guaranteed concentricity of the spindle nose better than 0,015 mm Gear wheels and shafts hardened... more
1993
excellent (used)
WEILER precision turret lathe with full equipment
very good condition, fully functional
-ᐳ pneumatically operated collet chuck including collet chuck set
-ᐳ Cross support with adjustable stops
Bikp2jmlv3
-ᐳ Turret support with inclined star turret head and 6 tools, separately adjustable stop for each tool position
-ᐳ Turret support with automatic feed, feed can be switched on and off automatically when the stop is reached, feed infinitely variable from 50 to 600mm/min
-ᐳ Automatic tapping and cu... more
Lorch mechanic lathe 5012
Built in 1969
Tip height: 100 mm
Top width: 250 mm
I0u9ctht3
380V
Weight 200 kg more
maxØ flat cams 250mm
max Ø bell-cams 200 mm
Bhc33zzjcw
max height bell-cams 120mm
max height bell with flange 200 more
Bed made of cast iron, heavily ribbed
Main spindle gear wheels are hardened and ground
Bed guides induction hardened and precision ground
Bed bend
Main spindle with camlock D1-4 "recording, hole Ø 38 mm, made in 2 adjustable precision bearings
adjustable main spindle bearings
Tailstock can be moved to the taper turning 10 mm ±
Guided tours of the wedge bar adjustable
Slide grooves reverser to change the direction of feed
3-axis position display
Working accuracy
... more
Mechanic's lathe
The highlight of the Basic series - powerful and fully equipped
bed made of grey cast iron, heavily ribbed
all guides induction hardened and precision ground
Main spindle with D1-4" seat, bore Ø 38 mm, guided in 2 adjustable precision taper roller bearings
all gear wheels made of Cr-Ni steel, hardened, precision ground, running in oil bath
Tailstock can be moved ± 10 mm for taper turning
Guides adjustable via wedge bars
acceptance certificate according to DIN
with 3-axis positio... more
1980
excellent (used)
Metal lathe H. Ernault
Turning length 1500 mm
Turning diameter 550 mm
Ebfj0jb
Clearance diameter in Holder 55 mm
Accelerated feeds more
1 USED MECHANICAL LATHE CAZENEUVE HBX 360
- Stock number : 6784
- Distance between centers: 750 mm
- Height between centers : 180 mm
- Spindle power : 5.2 kW
- Spindle speed : 50 to 3000 rpm
- Cross slide stroke : 180 mm
- Sleeve diameter: 60 mm
- Sleeve stroke :140 mm
- Spindle taper : CM5
- Taper tail stock : CM4
- Machine dimensions : 2000 x 1000 x H1300 mm
- Weight : about 1300 KG
Equipped with :
- 1 Multifix Turret with 3 tool holders
- 1 Chuck 3 jaws ∅ 200 mm
- 1 Tailstock chuck
- 1 Fix... more
1985
used
TURNING MACHINE "EBOSA"
with cooling device, tool-holder, lightening
TECHNICAL DATA
Turning
Max diameter 90 mm
Max length 45 mm
Threading (internal and external)
Max threading progression 1,5 mm
Max threading length 14 mm
Speed with normal motor 600-4200 min-1
Speed with with poles inversion motor 300-4200 min-1
Number of feeds per spindle rotation 38
0mv9gfs
Driving motor 2,5 HP
Chisels 1 to 8
Cooling tank 12 L
Ratio cams / workpiece 1 : 1
Cams diameter 180 mm more
NOW NEW! with quick-change tool holder Type: multifix with 4 inserts (factory fitted) Shaft fixing deviceTechnical description Guide and feed spindle Lathe GD330ND-TOP:-Lathe ideally suited for metalworking shops, workshops suitable lathe is delivered completely assembled, the precision scales are already assembled, only the position indicator has to be mounted incl. 3-axis digital position indicator for X, Y, and Z-axis incl. 3 precision scales, completely mounted for X, Y, and Z-axis telescopi... more
Mechanic's lathe
Center lathe at a favourable price
Main spindle gear wheels hardened and ground
Bed Offset
Main spindle with Camlock D1-4" holder, bore Ø 38 mm, guided in 2 adjustable precision bearings
adjustable main spindle bearing arrangement
Tailstock can be moved ± 10 mm for taper turning
Sliding wheel reversing gear for changing the feed direction
Guides adjustable via wedge bars
Bed made of grey cast iron, double prismatic guide, hardened and ground
3-axis position display
higher work a... more
On request you can also get this machine completely overhauled!
centre distance: 450 mm
centre height: 120 mm
spindle bore: 23 mm
Speed: 30 - 3000 rpm
Dwudgu
Tailstock: MK 2
Drive power: 1,5 KW
Weight: 350 Kg
Dimensions: 1200 x 650 x 1600 mm
Lacquering: Light grey
Digital display: On request at extra charge
Accessories: rear panel, chuck guard, coolant pump
further accessories on request more
Equipped with :
- 1 Clamping clamp W20
Bp7fgbly
- 1 Headstock with fly harness
- 1 Crossed mechanical trolley
- 1 Mechanical tailstock more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: the 10 strongest forklift trucks in the world
Sample sales contract for used machines in nine languages
Machineseeker now also sponsering Greuther Fürth
Photo gallery: The World's 10 biggest excavators
New Machineseeker.com TV commercial with Michael van Gerwen
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Lathes
Dealer for Lathes