Used Weiler 260 for sale (198)

Condition: good (used), used -- 6-fold changer for WEILER , type 260 Tedpfx Aajxdixnoqsd

Condition: used, Technical data : Center width approx. 500 mm Todsxq E Dmepfx Aaqed Center height above bed 125 mm 16 speeds from 125 - 2800 rpm Space requirement, length x width 1.2 x 0.6 m Estimated weight approx. 450 kg . Scope of delivery : Hand lever quick clamping device Electrical monitoring of whether the part clamping lever is in the open or clamped position 1 set of collets from 3.0 - 25.0 mm, increasing by 1 mm Cross support with two tool holders Turret with 6 tool holders .

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Tjdpoxqqmtefx Aaqjd

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Tsdpfxehtnu Tj Aaqsd

Year of construction: 1973, condition: excellent (used), turning length 125 mm Tjdpoxpxqwofx Aaqod weight of the machine ca. 0,4 t

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m². Todpfsvtthiex Aaqsd

Condition: used, Year of construction: 1992, machine/vehicle number: 160 3205, Sale only within EU member states! No private sale MAE can be inspected. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tooling, as well as for compliance with all safety and environmental protection safety and environmental protection requirements. Any warranty is excluded. Tsdpjuxl Ezofx Aaqsd For the correctness of the technical data and year of construction, for the completeness of accessories and tools as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: good (used), WEILER DA 260x1000 Center Lathe Digital Display - Three Axes "NEW" -Center Height 260mm -Turning Diameter Over Bed 535mm -Turning Diameter Over Cross Slide 345mm -Center Width 1000mm -Spindle Bore 71mm -Speed Range 33 - 1500 rpm -12 Spindle Speeds via Gearbox -Automatic Longitudinal / Cross Feeds -Threading / Metric / Inch / Diametrical -Tailstock MK 4 -NEW THREE-AXIS DIGITAL DISPLAY -Drive Power 7.5 kW -Face Spindle Nut "NEW" -Multifix Base Holder with Insert -Three-Jaw Chuck 350mm -2 Emergency Stops -Electric Chuck Guard "NEW" -Chip removal panel -Coolant system -Drill chuck -Documentation Dimensions: LxWxH 2.7 x 1.5 x 1.7 meters / Weight 1700 kg Tedowiztwspfx Aaqjd Subject to errors and omissions

Condition: good (used), Originating from a school. Nice and complete with accessories. Details: Turning diameter: 300 mm Turning length: 430 mm Swing diameter over bed slide: 160 mm Turning diameter over bed slide (with T-slots): 135 mm Centre distance: 470 mm Centre height: 145 mm Bed width: 205 mm Number of spindle speeds: 18 Speed range: 30 - 3550 rpm Speed range: 15 - 3550 rpm Number of feeds: 90 Feed range: 0.02 - 2.0 mm/rev Workpiece weight in steadies (max.): 25 kg Todew Ryhnepfx Aaqod Workpiece weight without steadies (max.): 80 kg Machine weight approx.: 0.9 t Total power requirement: 3.5 kW Machine dimensions approx.: 1475 x 795 x 1300 mm Quill diameter: 40 mm Quill stroke: 85 mm Control unit: Conventional

Condition: used, total length: 2,320 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 1.600 kg - Documentation available: No - Drive system: Conventional Todpow A H Tcofx Aaqod - Power [kW]: 4.0 - Centre height [mm]: 190 - Swing over bed [mm]: 380 - Distance between centres [mm]: 1000 - Spindle bore [mm]: 56 - Min. spindle speed [rpm]: 63 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2320mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1980, condition: used, Weiler W2 Todpfx Ajfgv Dgeaqsd hollow 280 mm centre height 440 mm bed width 320 mm weight of the machine ca. 200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. Tjdpfx Ajxq Hhyoaqod range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: used, This Weiler Condor lathe is being auctioned online in our industrial/machinery insolvency auction – SK Hydroautomation GmbH – CNC machines – workshop equipment – material. Todpfx Aexqyp Deaqsd

Year of construction: 2006, operating hours: 73,000 h, condition: ready for operation (used), Media Chip conveyor Yes This Weiler DZ65 was manufactured in 2006. A horizontal turning machine featuring a chip conveyor, counter spindle, extraction system, interface bar feeder, and an in-machine puller for 1m bars. It also boasts an enlarged coolant tank. Consider the opportunity to buy this Weiler DZ65 horizontal turning machine. Contact us for more information. Application Types Todpfsxp Sp Hsx Aaqed Turning

Condition: reconditioned (used), functionality: fully functional, WEILER PRAKTIKANT 160 – partially overhauled Tjdpoxtbc Defx Aaqsd AVAILABLE IMMEDIATELY FROM STOCK - Machine in very good condition / slides and guides flawless / runs extremely smoothly - 3-axis digital readout "NEW" - Center height: 160mm - Distance between centers: 650mm - Swing over bed: 320mm - Swing over cross slide: 198mm - Bar capacity: 40mm - Spindle speed range: 95–2500 rpm - Automatic longitudinal/cross feeds - Thread cutting: metric / inch / DP / module - Tailstock: MT 3 - 3-jaw chuck 160mm "NEW" - Electric chuck guard "NEW" - Work light "NEW" - Multifix quick-change tool post with three holders "NEW" - Chip guard at the rear "NEW" - 2x emergency stop - Bed stop - Operating tools - Documentation Dimensions: LxWxH: 1.7 x 1 x 1.6 meters / Weight: 700kg Subject to errors and input mistakes.

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout Tsdpfjwnh I Sox Aaqod - Type of digital readout: Weiler Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, Weiler E90 / 4.5M - CNC Lathe with Cycle Automation Tjdpfx Ajxn Rr Roaqod - Weiler D2 cycle control - Chip conveyor - Approx. 15 pcs. Multifix quick-change toolholders - 1 live centre - Regular servicing by Weiler - Supplied without chuck, without steadies - Year of manufacture: 2002 Technical Data Working Area: - Distance between centres: 4500 mm - Centre height: 450 mm - Swing diameter over bed: 900 mm - Swing diameter over cross slide: 530 mm - Bed width: 600 mm - Travel of cross slide: 590 mm - Travel of top slide: 250 mm - Cross slide length: 1230 mm - Cross slide width: 345 mm - Saddle guideway length: 860 mm - Tool shank cross-section (height/width): 40 x 40 mm Spindle: - Spindle nose according to DIN 55027 / 55026 size: 11 - Spindle diameter in front bearing: 178 mm - Spindle bore: 128 mm - Main spindle internal taper, metric: 140 mm Main Drive: - Spindle nose according to DIN 55027 size: 11 - Total speed range: 1 - 1120 rpm - Speed range gear stage I: 1 - 350 rpm - Speed range gear stage II: 4 - 1120 rpm - Drive power at 60%/100% duty cycle: 45 / 37 kW - Max. torque at spindle: 6000 Nm Feed Drive: - Feed range Z/X: 0 - 20 mm/rev - Feed force Z/X: 20 kN - Rapid traverse speed Z/X: 7 / 3.5 m/min Tailstock: - Quill diameter: 140 mm - Quill stroke: 300 mm - Quill internal taper: MK 6 Thread Cutting Range: - Metric threads: 0.1 - 400 mm - Inch threads: 1/4 - 56 TPI - Module threads: 0.125 - 28 mm - DP threads: 1 - 224 DP Connection Data: - Operating voltage: 400 V - Control voltage: 24 / 230 V - Connected load: 55 kW - Rated current: 85 A Machine Dimensions: - Total length: 6900 mm - Total width: 2600 mm - Total height: 2120 mm - Machine weight: 10,500 kg

Condition: used, turning diameter 210 mm turning length 1000 mm swing diameter over bed slide 435 mm centre height 210 mm greates pass round over bed 435 mm spindle head DIN 55027 / DIN ISO 702-3 spindle bore 52 mm turning speeds 44 - 2.000 U/min transmission ratio 12 feed per revolution 0,036 - 2 U/mm diameter of quill 65 mm quill stroke 120 mm taper bore DIN 228 MK4 total power requirement 5,5 kW -Lead screw and feed screw cover -Brake for main spindle -Toolmaker precision according to DIN 8605 -High drive power and high torque on the main spindle -Large thread cutting range -Convenient operation -Digital position display (HEIDENHAIN ND 7013) 3-axis display for bed, cross slide, and top slide Tool memory for 16 tools Tool memory with one reference point per axis Sum button for Z and Zo Inch/metric switchable Plane path X as radius or diameter display Display resolution up to 1 µ Taper calculator -LED machine light -Coolant device Tedpfx Aajxqrdysqod

Condition: good (used), Year of construction: 2003, functionality: fully functional, Weiler Praktikant VC – Lead and Feed Screw Lathe – fully functional Tsdpfxexr U Dxe Aaqsd For sale is a Weiler Praktikant VC, a precise and robust lead and feed screw lathe from 2003. The machine is in working condition and can be inspected and tested under power. Details: Manufacturer: Weiler Model: Praktikant VC Year of manufacture: 2003 Condition: functional Inspection/testing (under power): Monday–Friday by appointment The machine is ideal for workshops, training facilities, or for universal use in single-part production.

Condition: good (used), Year of construction: 2001, Lathe – cycle-controlled Manufacturer: WEILER Machine Model: E 35 Control: Siemens / Weiler D2 Year of manufacture: 2001 TECHNICAL DATA Distance between centers (mm): 950 Center height (mm): 200 Max. turning diameter over cross-slide (mm): 200 Max. turning diameter over bed (mm): 410 Tsdpfsxl Ulpsx Aaqsd Spindle - Max. speed (rpm): 3,000 Tailstock - Internal taper: MT 4 Connected load (kW): 10 DIMENSIONS & WEIGHT Length x width x height approx. (mm): 2,300 x 1,400 x 1,700 Weight approx. (kg): 2,100 Specifications and data are subject to change and errors.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: Todpoxndbfsfx Aaqsd - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 Tjdpfx Aoxnda Ueaqod quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel Todpexmak Hefx Aaqjd - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK Todpfx Ajxmakyjaqod quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm Tedpfx Aaoxmaktoqjd turning diameter over slide rest 170 mm turning speed range 24 - 2800 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions